What Is HACCP? The 7 Principles Explained
GIFSQ ID: ART-2234
HACCP (Hazard Analysis and Critical Control Points) is a preventive food safety system that finds the points in a process where a hazard can occur and controls them before the food reaches the consumer. Instead of relying on testing finished products, HACCP builds safety into every step, from receiving ingredients to shipping.
The system is used by food manufacturers, restaurants, caterers, dairies, meat and seafood processors, bakeries, beverage makers and supplement producers. It is the foundation of most food safety standards, including Codex Alimentarius guidance, ISO 22000 and GFSI-benchmarked schemes such as FSSC 22000.
In this guide you will learn what HACCP is, the 7 principles, how to build a plan in 12 steps, the mistakes to avoid, and where to find free tools and templates.
Why HACCP Matters
HACCP matters because it prevents problems instead of discovering them after the product has shipped. A single hazard that slips through can mean illness, a recall, lost customers and legal action.
- Safer food: hazards are controlled at the steps where they can actually be controlled.
- Regulatory compliance: many regulators require HACCP-based plans. Examples include USDA rules for meat and poultry, FDA rules for seafood and juice, and the preventive control plans required under Canada’s Safe Food for Canadians Regulations. Check which rules apply to your product and country.
- Customer and market access: retailers and export buyers often ask for HACCP-based certification before they will buy.
- Lower cost of failure: fewer rejected batches, recalls and complaints.
- Clear accountability: every control has an owner, a limit and a record.
Hazards HACCP Controls
HACCP groups hazards into four types, and a hazard analysis must consider each one at every process step.
| Hazard type | Examples | Typical control |
|---|---|---|
| Biological | Salmonella, Listeria monocytogenes, E. coli O157:H7, norovirus, parasites | Cooking, pasteurization, chilling, acidification |
| Chemical | Cleaning agents, pesticide residues, mycotoxins, heavy metals | Supplier approval, chemical storage, testing |
| Physical | Metal, glass, hard plastic, bone, stones | Metal detectors, sieves, magnets, X-ray |
| Allergens | Milk, eggs, peanuts, tree nuts, wheat, soy, fish, shellfish, sesame | Segregation, cleaning validation, accurate labeling |
Allergens are often handled as a chemical hazard, but many plans treat them separately because undeclared allergens are one of the most common causes of food recalls.
The 7 Principles of HACCP
HACCP rests on 7 principles set out by Codex Alimentarius. Here is each one with a practical example from cooked chicken production.
- Conduct a hazard analysis. List every step of the process and identify biological, chemical, physical and allergen hazards at each one. Example: raw chicken may carry Salmonella.
- Determine the Critical Control Points (CCPs). A CCP is a step where control is essential to prevent, eliminate or reduce a hazard to an acceptable level. Example: the cooking step.
- Establish critical limits. Set a measurable limit for each CCP. Example: a core temperature of at least 74 °C (165 °F). Your limit must come from regulation or scientific evidence.
- Establish monitoring procedures. Decide who checks, what they check, how and how often. Example: an operator measures the core temperature of each batch with a calibrated probe.
- Establish corrective actions. Define what happens when a limit is missed. Example: hold the batch, re-cook or discard it, find the cause, and record the action.
- Establish verification procedures. Confirm the system works. Example: calibrate thermometers, review records, run internal audits and take product samples.
- Establish documentation and record keeping. Keep the plan, monitoring records, corrective actions and verification results. If it is not recorded, you cannot prove it happened.
How to Build a HACCP Plan in 12 Steps
Codex describes 12 steps: five preparation steps, then the seven principles.
- Assemble the HACCP team, with production, quality, maintenance and sanitation people.
- Describe the product: ingredients, packaging, shelf life and storage.
- Identify the intended use and the consumers, including vulnerable groups.
- Draw a flow diagram of every step from receiving to dispatch.
- Confirm the flow diagram on the production floor.
- Conduct a hazard analysis (Principle 1).
- Determine the CCPs (Principle 2).
- Establish critical limits (Principle 3).
- Establish monitoring procedures (Principle 4).
- Establish corrective actions (Principle 5).
- Establish verification procedures (Principle 6).
- Establish documentation and record keeping (Principle 7).
Once the plan is written, train the people who carry it out, validate that the controls work, and review the plan at least once a year and whenever a product, process, ingredient or piece of equipment changes.
Prerequisite Programs You Need First
HACCP only works on top of a solid foundation. Prerequisite programs (PRPs) control general hygiene and operating conditions so the HACCP plan can focus on the significant hazards.
- Good Manufacturing Practices (GMP) and personal hygiene
- Cleaning and sanitation programs
- Pest control
- Supplier approval and incoming material checks
- Allergen management
- Water quality and utilities
- Equipment maintenance and calibration
- Traceability and recall procedures
- Staff training
If PRPs are weak, the HACCP plan ends up with too many CCPs and is hard to run.
HACCP vs GMP vs ISO 22000 vs FSSC 22000
These terms are often confused. HACCP is a method for controlling hazards; the others are the conditions or management systems around it.
| HACCP | GMP | ISO 22000 | FSSC 22000 | |
|---|---|---|---|---|
| What it is | Hazard control method | General hygiene and operating practices | Food safety management system standard | Certification scheme built on ISO 22000 |
| Focus | Specific hazards at specific steps | The whole facility and its conditions | Management, planning, HACCP and PRPs | ISO 22000 plus sector PRPs and extra requirements |
| Certifiable? | Usually audited as part of another scheme | Audited as part of other schemes | Yes | Yes, GFSI-benchmarked |
| Best for | Building your food safety plan | Your baseline hygiene program | A company-wide management system | Meeting major retailer requirements |
Common HACCP Mistakes to Avoid
- Too many CCPs. If everything is a CCP, nothing gets proper attention. Control lower-risk hazards through PRPs.
- Copying a generic plan. A plan has to match your product, process and equipment.
- Critical limits with no scientific basis. Limits must come from regulation, standards or validation data.
- Uncalibrated instruments. A thermometer that is off by 3 °C makes the records meaningless.
- Records filled in after the fact. Monitoring must be recorded when it happens.
- No validation. Show that the control actually reduces the hazard, not just that the step is done.
- Never reviewing the plan. New ingredients, suppliers and equipment all change the hazards.
- Untrained staff. The people running a CCP must know why the limit matters and what to do when it fails.
Free HACCP Resources from GIFSQ
- Learn step by step in the HACCP Principles and Implementation course, a free intermediate program.
- Start from the basics with the Food Safety Basics course.
- Build your plan with the HACCP & Food Safety Plan Helpers.
- Download ready-to-use SOPs and templates.
- Check your understanding with the free food safety quizzes.
- Look up terms in the food safety glossary.
- Browse all HACCP material in the HACCP & Food Safety hub.
- Need expert support with your plan or audit? Book a consultation.
Frequently Asked Questions
Is HACCP mandatory?
It depends on your country and sector. Many regulators require HACCP-based plans for meat, poultry, seafood and juice, and many retailers expect it from all suppliers. Check the rules for your product with your local regulator.
What does HACCP stand for?
Hazard Analysis and Critical Control Points.
What is a critical control point?
A step in the process where control is essential to prevent, eliminate or reduce a food safety hazard to an acceptable level.
What is the difference between HACCP and GMP?
GMP sets the general hygiene and operating conditions of a facility. HACCP targets specific hazards at specific process steps.
What is the difference between HACCP and ISO 22000?
HACCP is a hazard control method. ISO 22000 is a management system standard that includes HACCP principles and can be certified. Read the full ISO 22000 vs HACCP comparison.
How many CCPs should a plan have?
There is no fixed number. Most plans have only a few, because lower-risk hazards are controlled by prerequisite programs.
How often should a HACCP plan be reviewed?
At least once a year, and whenever a product, ingredient, process or piece of equipment changes.
Can I get HACCP certification?
HACCP itself is usually certified as part of a scheme such as ISO 22000, FSSC 22000 or a national program. Individuals can complete HACCP training and earn a certificate of completion.
Conclusion
HACCP turns food safety from reaction into prevention: analyze the hazards, control the critical steps, monitor, correct, verify and keep records. Start with strong prerequisite programs, build the plan with a team, and review it whenever something changes.
Ready to put it into practice? Explore our courses, try the free HACCP tools, or book a consultation with a GIFSQ expert.
References
- Codex Alimentarius Commission, General Principles of Food Hygiene (CXC 1-1969), including the HACCP annex. Check the current version of the text before applying it.
- ISO 22000, Food safety management systems.
- Your regulator’s HACCP guidance, such as CFIA (Safe Food for Canadians Regulations), FDA or USDA FSIS. Check the critical limits for your own product before publishing.
Author: GIFSQ. Last reviewed: November 16, 2026.