Login Register

Access the GIFSQ Portal

Select your user type to log in or register a new account.

Student Portal

Access your food safety courses and exams.

Instructor Portal

Manage courses, view student submissions, and grade quizzes.

Company Portal

Manage corporate setup, view employee logs, and access QA services.

Home / Resources / Tools Hub / Skim Milk Powder Addition Calculator

Skim Milk Powder Addition Calculator

Interactive Tool Free Resource

GIFSQ ID: CAL-0547

GIFSQ Tools : Dairy : Version v1 : Technical review date: 2026-11-15

Kilograms of skim milk powder (and water) to add to milk to raise SNF (MSNF) to a target, for standardisation or recombination.

Educational calculator: this is a calculation aid for learning and planning. It is not a validated food safety process and must not be presented as one. Confirm any value against your accredited method and your own process validation before using it in production.

Inputs

Enter values above to see results.

Formula

Overall: milk + powder + water = final mass. SNF: milk x SNF% + powder x powder SNF% = final x target SNF%. Fat: milk x fat% + powder x powder fat% = final x target fat%. Solve the two equations for powder kg and water kg. Skim milk powder fat is low; enter it from the specification.

Variable definitions and units

Milk, powder, water, final mass: kg. SNF and fat: % w/w. SNF is calculated (total solids minus fat), not measured directly.

Assumptions

Powder dissolves fully. No losses. Powder composition is as entered from its specification.

Input validation

All kg 0 or greater. Percentages 0 to 100%. Target SNF % achievable from the entered powder; the tool rejects impossible targets. Powder SNF % greater than target SNF %.

Worked example

No worked skim milk powder addition calculation with numbers is given in the books, so no book worked example is shown. Bylund notes reconstituted skim milk with 9 to 12% dry matter made from top-grade skim milk powder (Ch. 11, yoghurt), MSNF increased by addition of milk powder (Ch. 11), and the reconstitution ratio of about 1 part powder to 10 parts water (Ch. 18). The test below is a closure check: the solver result is fed back into the two balance equations and must return the target SNF and fat.

Expected output

Powder kg, water kg, final mass kg, and final SNF % and fat % as check values (they must equal the targets).

Calculation limitations

No book worked example. Powder composition varies by supplier. SNF is calculated (total solids minus fat), not measured directly. The tool must not present a recombined product as fresh milk.

Source

Bylund, Dairy Processing Handbook, Tetra Pak, 2003, Ch. 6.2 (mass balance method), Ch. 11 (reconstituted skim milk 9 to 12% dry matter; MSNF increased by milk powder), Ch. 18 (reconstitution ratio about 1 to 10).