GIFSQ ID: CAL-0544
GIFSQ Tools : Dairy : Version v1 : Technical review date: 2026-11-15
Completion of the live Milk Fat Standardization Calculator (fat only) and the separate Milk Solids-Not-Fat Calculator: standardise fat by the Pearson rectangle and track SNF by mass balance in the same tool, so both are checked together.
Educational calculator: this is a calculation aid for learning and planning. It is not a validated food safety process and must not be presented as one. Confirm any value against your accredited method and your own process validation before using it in production.
Inputs
Formula
Fat: Pearson rectangle, Bylund Ch. 6.2 p. 112: parts of A = C - B, parts of B = A - C; kg of A = X x (C - B) / [(C - B) + (A - C)], kg of B = X x (A - C) / [(C - B) + (A - C)]. SNF: mass balance, Bylund Ch. 6.2: result SNF % = (kg A x SNF A % + kg B x SNF B %) / final kg. SNF gap kg = (target SNF % - result SNF %) / 100 x final kg; a positive gap is the extra SNF to supply, for example by powder (see D6). SNF = total solids % - fat %.
Variable definitions and units
Fat and SNF: % w/w. Final quantity and stream masses: kg. Stream SNF values are entered, not from the book (the book gives no SNF split for separator streams). SNF gap: kg.
Assumptions
Fat contents are as entered. No losses. Streams mix uniformly. Stream SNF values are as entered from analysis.
Input validation
Fat contents 0 to 100%. Target fat % strictly between A and B. Final quantity greater than 0. SNF values 0 to 100%, fat plus SNF no greater than 100% per stream.
Worked example
Fat leg: book worked example (Bylund, Ch. 6.2, p. 112): cream 40%, skim 0.05%, target 3% gives 2.95 kg cream and 37.00 kg skim for 39.95 kg at 3% fat. SNF leg: no book worked example (the book gives no SNF figures for cream and skim streams). Illustrative SNF check with entered values (not book values): cream SNF 5%, skim SNF 9% gives result SNF = (2.95 x 5 + 37 x 9) / 39.95 = 8.70%, gap to a target of 8.8% is 0.04 kg SNF.
Expected output
Kg of stream A, kg of stream B, final fat % check, result SNF %, target SNF %, SNF gap kg with a note on whether powder addition (D6) is needed.
Calculation limitations
Fat only is balanced by the rectangle; SNF is checked, not balanced, by the two streams alone. If result SNF misses the target, a third stream or powder is needed. Stream SNF values are entered, not book values.
Source
Bylund, Dairy Processing Handbook, Tetra Pak, 2003, Ch. 2 (SNF = total solids minus fat) and Ch. 6.2, p. 112. Completes live tools: Milk Fat Standardization Calculator and Milk Solids-Not-Fat Calculator.