GIFSQ ID: CAL-0545
GIFSQ Tools : Dairy : Version v1 : Technical review date: 2026-11-15
Overall, fat and SNF balance across a separation or standardisation step, so fat and SNF are tracked together instead of in two separate tools.
Educational calculator: this is a calculation aid for learning and planning. It is not a validated food safety process and must not be presented as one. Confirm any value against your accredited method and your own process validation before using it in production.
Inputs
Formula
Overall: input kg = sum of output kg. Fat: input kg x fat % = sum(output kg x fat %). SNF: input kg x SNF % = sum(output kg x SNF %). SNF = total solids % - fat %. Water % = 100 - fat % - SNF %. Closure error = input minus output, in kg.
Variable definitions and units
Masses: kg. Fat and SNF: % w/w. Fat kg and SNF kg per stream: kg. Closure error: kg. SNF is calculated (total solids minus fat), not measured directly.
Assumptions
Mass is conserved. SNF follows the same split as the streams entered (no SNF loss model). Density is not used.
Input validation
All kg greater than 0. Percentages 0 to 100%. Fat % plus SNF % no greater than 100% for any stream. Output masses sum to input mass within tolerance, or the tool flags the imbalance.
Worked example
Fat leg from the book (Bylund, Ch. 6.2, pp. 112-113): 100 kg milk at 4% fat separates into 90.35 kg skim at 0.05% fat and 9.65 kg cream at 40% fat. Fat in 4.00 kg, fat out 3.86 kg in cream + 0.05 kg in skim = 3.91 kg, closure (in minus out) 0.09 kg: fat out is 0.09 kg short of fat in (see D3 note). SNF leg: the book gives milk composition but no SNF figures for the cream and skim streams in this example, so a worked SNF example is not in the books and is left blank here. Book composition numbers that may be used for inputs: mean milk total solids 13.0% (range 10.5 to 14.5%), mean fat 3.9%, so mean SNF 9.1% (Table 2:3). Density example: milk 3.2% fat and 8.5% SNF, total solids 11.7%, water 88.3% (Ch. 2). The sample values use the fat leg from the book with entered (not book) stream SNF values, clearly labelled as entered.
Expected output
Per-stream fat kg and SNF kg, total in versus total out for mass, fat and SNF, and closure error for each. Fat leg on book inputs: fat in 4.00 kg, fat out 3.91 kg, closure 0.09 kg.
Calculation limitations
SNF is not measured directly in most plants (it is calculated from total solids minus fat). The book gives no SNF split for separator streams, so the SNF leg relies on entered values. Density-based SNF estimation (Bylund Ch. 6.2, density transmitter) is a separate method and is not part of this balance.
Source
Bylund, Dairy Processing Handbook, Tetra Pak, 2003, Ch. 2 (SNF definition, Table 2:3, density example) and Ch. 6.2, pp. 112-113.