GIFSQ ID: CAL-0543
GIFSQ Tools : Dairy : Version v1 : Technical review date: 2026-11-15
Kilograms of cream obtained per 100 kg of milk separated, and cream yield percent.
Educational calculator: this is a calculation aid for learning and planning. It is not a validated food safety process and must not be presented as one. Confirm any value against your accredited method and your own process validation before using it in production.
Inputs
Formula
Overall balance: milk = cream + skim. Fat balance: milk x milk fat % = cream x cream fat % + skim x skim fat %. Solving: cream kg = milk kg x (milk fat % - skim fat %) / (cream fat % - skim fat %). Cream yield % = cream kg / milk kg x 100. Fat recovery % = cream x cream fat % / (milk x milk fat %) x 100.
Variable definitions and units
Milk: kg. Milk fat, cream fat, skim fat: % w/w. Cream: kg. Skim milk: kg. Cream yield: %. Fat recovery: %.
Assumptions
All fat is conserved in cream plus skim (no losses). Fat contents are as entered. Separation is complete at the stated cream fat %.
Input validation
Milk kg greater than 0. Fat contents 0 to 100%. Cream fat % greater than milk fat % greater than skim fat %. Cream kg less than milk kg.
Worked example
Book example (Bylund, Dairy Processing Handbook, Ch. 6.2, pp. 112-113): 100 kg whole milk at 4% fat separates into 90.35 kg skim milk at 0.05% fat and 9.65 kg cream at 40% fat. Cream yield = 9.65 kg per 100 kg milk = 9.65%. Note, stated honestly: the book printed figures do not close exactly (fat out = 9.65 x 0.40 + 90.35 x 0.0005 = 3.905 kg against 4.00 kg in; about 0.1 kg unaccounted, most likely rounding or losses in the book illustration). The fat-balance formula on the same inputs gives 100 x (4 - 0.05) / (40 - 0.05) = 9.89 kg. This tool shows the book printed 9.65 kg as the worked example and the formula result separately, and does not silently reconcile them.
Expected output
Cream kg, skim kg, cream yield %, fat recovery %. For the formula on the book inputs: cream 9.89 kg, skim 90.11 kg, yield 9.89%, fat recovery 98.87%.
Calculation limitations
Assumes no fat loss; real separators lose a little fat to skim and sludge. Cream fat % depends on separator setting and milk temperature. The book example is one plant illustration, not a universal yield.
Source
Bylund, Dairy Processing Handbook, Tetra Pak, 2003, Ch. 6.2, pp. 112-113. Cross-check: live Cream Separation Mass Balance tool, which already outputs fat recovery %.