Login Register

Access the GIFSQ Portal

Select your user type to log in or register a new account.

Student Portal

Access your food safety courses and exams.

Instructor Portal

Manage courses, view student submissions, and grade quizzes.

Company Portal

Manage corporate setup, view employee logs, and access QA services.

Cheese Manufacture – Part 2

GIFSQ ID: ART-0873

Twenty questions on how cheese is made, from curdling the milk to pressing, salting, and ripening.

What this quiz covers

This quiz is the second half of cheese manufacture: twenty questions on cheese composition, the abbreviations makers use, and the defects and finishes that decide quality. If the first part was about the vat, this part is about the numbers on the specification sheet and the faults that show up during curing. Each question is short, but behind each one sits a figure or a fault worth knowing.

You will start with fat in dry matter, extra-hard, hard and soft cheese each in its own band, then the two abbreviations every cheese technologist must know: FMFS, fat in moisture-free substance, and WFFS, water in fat-free substance, with worked values for cheddar and cottage cheese. Then come the vat factors that change coagulation, calcium chloride, acidity, mastitis milk and overheating, plus syneresis, salting, paraffining and the moisture that a long set leaves behind. A longer set time, for example, leaves more moisture in the cheese, and paraffining protects the rind while it cures.

Why composition numbers matter

Cheese is sold and graded on composition: fat in dry matter and moisture on a fat-free basis are the figures on the specification sheet, and they are how a buyer compares a cheddar with a Parmesan or a cottage cheese. Learning to read those figures, and to work out a WFFS value from a composition table, is a practical skill, not an exam trick.

How to use this quiz

Take it cold first, then read the explanations below the player. Each answer explains why the correct choice is right in plain words, so a wrong answer becomes a fact you keep. Use it as a revision round before an exam or a job interview, and come back to the questions you missed.

Cheese Manufacture – Part 2
Uncategorized

Choose how you want to play

Sound effects
πŸ”ˆ Volume
Show explanations
πŸ”Š Auto-read every question
Reading speed

Answer explanations

Worked through the quiz? Here is why each correct answer is correct: the concept behind it, in plain terms.

  1. Fat in extra-hard cheese (as a share of dry matter) is about what?
    Correct answer: Less than 60%: Extra-hard cheeses like Parmesan carry roughly 35 to 45 percent fat on a dry basis, well under 60 percent.
  2. Fat in hard cheese (as a share of dry matter) is about what?
    Correct answer: Less than 60%: Hard cheeses like cheddar sit near 50 percent fat in dry matter, again under 60 percent.
  3. Fat in soft cheese (as a share of dry matter) is about what?
    Correct answer: 10 to 50%: Soft cheeses span a wide band, from low-fat cottage types near 10 percent up to rich soft cheeses near 50 percent fat in dry matter.
  4. For satisfactory rennet coagulation, calcium chloride is added at about what level?
    Correct answer: 0.02%: Calcium chloride is added at about 0.02 percent of the milk to restore the calcium balance disturbed by pasteurization and give a firm, prompt rennet set.
  5. What does the abbreviation FMFS stand for?
    Correct answer: Fat in moisture-free substance: FMFS means fat in moisture-free substance, fat as a share of dry matter, the standard basis for comparing cheeses of different moisture.
  6. What does the abbreviation WFFS stand for?
    Correct answer: Water in fat-free substance: WFFS means water in fat-free substance, moisture as a share of everything but the fat.
  7. What is the approximate WFFS value for cheddar cheese?
    Correct answer: 54%: From the composition table, cheddar at 36.8 percent moisture and 33.8 percent fat gives WFFS near 55.6 percent, and 54 percent is the nearest option.
  8. What is the approximate WFFS value for cottage cheese?
    Correct answer: 75%: From the composition table, cottage cheese at 69.8 percent moisture and 1.0 percent fat gives WFFS near 70.5 percent, and 75 percent is the nearest option.
  9. Which condition causes rind rot in cheese?
    Correct answer: High acidity: Rind rot is a finish defect caused by excessive acidity and moisture in the cheese before curing.
  10. The moisture content of processed cheese is typically about what?
    Correct answer: 47%: Processed cheese is standardised to about 47 percent moisture, higher than natural cheddar because of added water and emulsifying salts.
  11. Nisin, when used in processed cheese, is added at about what level?
    Correct answer: 0.01%: Nisin is used in processed cheese near 0.01 percent, or 100 ppm, as the anti-clostridial preservative that prevents blowing during storage. Note the true limit is lower today: the Codex maximum for processed cheese is 12.5 mg per kg, so modern practice runs well below the older industry figure this question uses.
  12. The fat content of processed cheese is typically about what?
    Correct answer: 40%: Processed cheese runs about 40 percent milk fat on a dry basis, roughly two-fifths of its solids are fat.
  13. Which kind of enzyme is rennin best described as?
    Correct answer: A sulfur-containing enzyme: Rennin, chymosin, is an aspartic protease whose chain carries sulfur in methionine and cysteine residues; it is not a metal-dependent enzyme. Note the label is a weak classification, since every protein chain carries sulfur amino acids.
  14. High acidity in milk does what to the clotting rate of rennin?
    Correct answer: Increases it: Acid shifts milk pH toward casein’s isoelectric point, speeding the aggregation phase of rennet coagulation, so high-acid milk sets faster.
  15. Mastitis milk coagulates with rennin at what speed?
    Correct answer: Slowly: Mastitis milk is abnormally alkaline with a disturbed salt balance, so it coagulates slowly and weakly with rennet.
  16. Heating milk above pasteurization does what to rennet coagulation?
    Correct answer: Hinders it: Heating past pasteurization denatures whey proteins, which coat the casein micelles and block rennet’s access, the classic reason UHT milk will not set.
  17. How else is syneresis of cheese curd described?
    Correct answer: All three: expulsion of whey, contraction of curd and weeping of curd: Syneresis is the curd contracting and weeping out whey, so expulsion of whey, contraction of curd and weeping of curd are three descriptions of one phenomenon.
  18. Which of these are functions of salting in cheese making?
    Correct answer: All three: removing whey, firming the curd and checking lactic acid formation: Salting draws whey from the curd, firms its body, and checks further lactic-acid formation by restraining the starter; all three are salting’s jobs.
  19. Paraffining (waxing) cheese is done for what purpose?
    Correct answer: Reducing moisture loss: Paraffining seals the rind so the cheese does not dry out during curing; it adds no flavour or nutrition.
  20. A longer coagulation period gives cheese of what moisture content?
    Correct answer: Higher: A longer undisturbed set lets the gel hold more serum, so cutting later gives a higher-moisture cheese.