Login Register

Access the GIFSQ Portal

Select your user type to log in or register a new account.

Student Portal

Access your food safety courses and exams.

Instructor Portal

Manage courses, view student submissions, and grade quizzes.

Company Portal

Manage corporate setup, view employee logs, and access QA services.

Fermented Milks and Cultures Quiz

GIFSQ ID: ART-0924

What this quiz covers

This quiz stays inside the yoghurt plant, from homogenization to cooling, and then visits the fermented milks around it. Yoghurt milk is homogenized to break fat globules below 1 micrometre, on a single stage or two stages, with the first stage at about 15 MPa and the second at about 4 MPa, which breaks up the clusters the first stage forms.

Fermentation numbers carry the middle of the quiz. Set yoghurt for a short incubation is inoculated at about 42 C, the optimum for Streptococcus thermophilus and Lactobacillus delbrueckii subsp. bulgaricus, while a longer, slower incubation starts near 32 C. Starter is generally added at about 2 percent, and fermentation is stopped by rapid cooling when the pH falls to about 4.0 to 4.6.

Strained yoghurts, kefir and the probiotic milks

The last group is the family of fermented milks. Syuzma, chakka and skyr are all concentrated yoghurts, strained to remove whey, and torba is the Turkish strained yoghurt. Bulgarian buttermilk is inoculated at about 3 percent, acidophilus milk at about 1 percent with its signature Lactobacillus acidophilus. Kefir is mildly alcoholic at 1 to 1.5 percent, carries 0.7 to 1.0 percent lactic acid, and like koumiss it is naturally sparkling from the carbon dioxide its yeasts produce.

How to use this quiz

Before you start, learn the pressure pair: first stage 15 MPa, second stage 4 MPa. Then learn the temperature pair: 42 C for a short set, 32 C for a long one. After you finish, read the explanations below the player: each one states the correct answer and the reason in plain words, so a wrong answer becomes a fact you can carry into the next lab session or exam.

Fermented Milks and Cultures Quiz
Uncategorized

Choose how you want to play

Sound effects
🔈 Volume
Show explanations
🔊 Auto-read every question
Reading speed

Answers explained

Each answer below gives the correct choice and the reason behind it, in the same order as the questions above.

  1. Which type of homogenization is used for yoghurt milk?
    Correct answer: Both single-stage and double-stage: Homogenization breaks milk fat globules to under 1 µm so the yoghurt body stays smooth and cream does not separate.
  2. In yoghurt making, first-stage homogenization runs at about what pressure?
    Correct answer: 15 MPa: First-stage homogenization of yoghurt milk runs at about 15 MPa (≈150 bar / 2200 psi). This pressure supplies the shear, cavitation, and turbulence that shatter fat globules to sub-micron size.
  3. In yoghurt making, second-stage homogenization runs at about what pressure?
    Correct answer: 4 MPa: The second stage runs at about 4 MPa (≈500–600 psi), roughly one-fifth of the first-stage pressure. It breaks up fat-globule clusters formed in the first stage and prevents re-coalescence.
  4. What does heating yoghurt milk to 60–80 °C before fermentation mainly help with?
    Correct answer: Protein hydration: Preheating yoghurt milk in the 60–80°C range promotes protein–water interactions (protein hydration), which improves water binding in the mix. Note: the main effect of heating yoghurt milk is denaturing the whey proteins so the gel sets firmer, and ‘protein hydration’ is the quiz’s wording for it.
  5. Set yoghurt for a short incubation is inoculated at about what temperature?
    Correct answer: 42 °C: Set yoghurt for short incubation is inoculated at about 42°C , the optimum for the thermophilic starter pair Streptococcus thermophilus and Lactobacillus delbrueckii subsp.
  6. Set yoghurt for a longer incubation is inoculated at about what temperature?
    Correct answer: 32 °C: For a longer, slower incubation the mix is inoculated cooler, at about 32°C. The lower temperature slows acid development, giving a milder flavour and an extended fermentation.
  7. Yoghurt starter is generally added at about what level?
    Correct answer: 2%: Yoghurt milk is inoculated with about 2% bulk starter (published range 2–3%; Tamime). This level gives rapid, balanced acid development by the S.
  8. Yoghurt fermentation is generally stopped at about what pH?
    Correct answer: 4.0: Fermentation is stopped by rapid cooling when the pH falls to about 4.0–4.6 , published producer set points span this range, with casein’s isoelectric point at 4.6 , and the acid level then gives the characteristic tartness and firm gel. Note: producers stop fermentation anywhere from pH 4.0 to 4.6, so 4.0 is the low end of the range rather than a single fixed point.
  9. Cooling yoghurt after fermentation mainly develops which attributes?
    Correct answer: Both texture and flavour: Rapid cooling after fermentation firms the protein gel (texture) while the starter’s enzymes continue developing acetaldehyde and other flavour compounds during cold storage.
  10. Which of these are concentrated (strained) yoghurts?
    Correct answer: All three: syuzma, chakka and skyr: Syuzma (Central Asian strained yoghurt), chakka (Indian strained dahi), and skyr (Icelandic strained yoghurt) are all concentrated by straining off whey.
  11. Which of these is a concentrated yoghurt?
    Correct answer: Torba: Torba is a Turkish strained (concentrated) yoghurt. Tan is a diluted yoghurt drink and mastou is an Iranian yoghurt , neither is a concentrated product.
  12. Bulgarian buttermilk is typically inoculated with about what starter level?
    Correct answer: 3%: Bulgarian buttermilk is inoculated with about 3% starter, typically Lactobacillus delbrueckii subsp. bulgaricus, and fermented warm.
  13. Acidophilus milk is typically inoculated with about what starter level?
    Correct answer: 1%: Acidophilus milk is inoculated with about 1% Lactobacillus acidophilus starter (published flow sheets give 1–2%).
  14. What is the approximate alcohol content of kefir?
    Correct answer: 1-1.5%: Kefir’s yeasts ferment lactose to ethanol as well as CO₂, making it mildly alcoholic; reported alcohol levels reach about 1–1.5% in traditionally fermented kefir (Moreno et al.
  15. What is the approximate lactic acid content of kefir?
    Correct answer: 0.7-1.0%: Kefir’s lactic-acid bacteria convert lactose to lactic acid, giving 0.7–1.0% titratable acidity (a published review of kefir composition reports 1.0% lactic acid).
  16. Are kefir and koumiss sparkling (effervescent) drinks?
    Correct answer: Both are: Kefir and koumiss are both yeast–bacteria fermentations: yeasts produce ethanol and carbon dioxide along with lactic acid.
  17. A probiotic milk is named after its signature bacterium. Which organism is the characteristic microbe of acidophilus milk?
    Correct answer: Lactobacillus acidophilus: Acidophilus milk is named for its signature probiotic, Lactobacillus acidophilus, which is inoculated as a pure culture.
  18. Starch and pectin in yoghurt are limited to a maximum of about what?
    Correct answer: 0.5%: Starch and pectin are used only as stabilizers in yoghurt, to bind water and limit wheying-off; their combined use is capped at about 0.5%, since higher levels give a pasty, starchy body instead of a clean yoghurt gel.
  19. Yoghurt is what type of weak gel?
    Correct answer: Viscoelastic: Yoghurt is a weak gel: its casein network deforms under stress and partly recovers, showing both viscous flow and elastic recovery.
  20. Homogenization of milk does what to its heat stability?
    Correct answer: Decreases it: Homogenization shatters fat globules and coats the new surface with casein, which makes the protein system more heat-sensitive.