Login Register

Access the GIFSQ Portal

Select your user type to log in or register a new account.

Student Portal

Access your food safety courses and exams.

Instructor Portal

Manage courses, view student submissions, and grade quizzes.

Company Portal

Manage corporate setup, view employee logs, and access QA services.

Other Food Engineering Topics – Part 3

GIFSQ ID: ART-0824

What this quiz covers

This quiz ranges across the food plant: supercritical fluids, natural convection, powders, biogas, fuels and boilers. At supercritical temperature, carbon dioxide acts as a supercritical fluid. Natural convection is characterised by the Grashof number, and the angle formed by pouring a powder into a heap on a flat surface is the angle of repose. The digester is the heart of a biogas plant, the calorific value of natural gas is about 50 megajoules per kilogram, and LPG has the highest gross calorific value per cubic metre of the gaseous fuels listed.

Boilers and break-even come next. A boiler mainly consists of a fire box, a heat exchanger and a flue, and the safety valve used in a boiler is the spring loaded valve. In a food industry the break-even point occurs when the total annual product cost equals the total annual sales. The solvent used in extractive distillation is of low volatility, the plunger pump feeds boiler water, and the pressure ratio below 3 in a blower and 10 or more in a compressor is called compression.

Filters, blenders, screens

Polished surfaces have low emissivity, so they radiate little heat. Ribbon blenders are exclusively meant for mixing non-flowing powders and thin pastes. Traces of solids are removed from a liquid in a clarifier, and adding a filter aid increases the porosity of the cake. Diatomaceous earth is the most common filter aid. A paddle agitator is suitable for mixing low-viscosity liquids, mesh number indicates the number of openings per linear inch, and cyclones are used primarily for separating solids from fluids.

How to use this quiz

Learn the numbers as a short table before you start: natural gas about 50 megajoules per kilogram, and the blower ratio below 3 against the compressor at 10 or more. Then keep the filter pair together: the clarifier removes traces of solids, and the filter aid keeps the cake porous. After you finish, read the explanations below the player: each one states the correct answer and the reason in plain words, so a wrong answer becomes a fact you can carry into the next lab session or exam.

Other Food Engineering Topics – Part 3
Uncategorized

Choose how you want to play

Sound effects
πŸ”ˆ Volume
Show explanations
πŸ”Š Auto-read every question
Reading speed

Note: the player shuffles the questions and the answer options on every attempt, so the numbers in the player will not match the numbers in the explanations below. Match each answer by its wording.

Answer explanations

Worked through the quiz? Here is why each correct answer is correct: the concept behind it, in plain terms.

  1. At supercritical temperature, carbon dioxide acts as what?
    1. A high density liquid
    2. A tightly packed solid
    3. A supercritical fluid (correct answer)
    4. A fast moving gas

    Correct answer: A supercritical fluid: At supercritical temperature, carbon dioxide acts as a supercritical fluid, neither a liquid nor a gas, and it is used to extract flavours and caffeine.
  2. Natural convection is characterised by which dimensionless number?
    1. Peclet number
    2. Prandtl number
    3. Reynolds number
    4. Grashof number (correct answer)

    Correct answer: Grashof number: Natural convection is characterised by the Grashof number, which compares buoyancy forces with viscous forces.
  3. The angle formed by pouring a powder into a heap on a flat surface is known as what?
    1. Contact angle
    2. Angle of repose (correct answer)
    3. Angle of nip
    4. Critical angle

    Correct answer: Angle of repose: The angle formed by pouring a powder into a heap on a flat surface is the angle of repose, a measure of how freely the powder flows.
  4. Which part is considered the heart of a biogas plant?
    1. Inlet pipe
    2. Mixing tank
    3. Outlet pipe
    4. Digester (correct answer)

    Correct answer: Digester: The digester is considered the heart of a biogas plant, since it is where microbes break down waste and release methane.
  5. The calorific value of natural gas is about how many MJ per kg?
    1. 80
    2. 70
    3. 60
    4. 50 (correct answer)

    Correct answer: 50: The calorific value of natural gas is about 50 megajoules per kilogram.
  6. Which gaseous fuel is likely to have the highest gross calorific value per cubic metre?
    1. Sewage gas
    2. Producer gas
    3. LPG (correct answer)
    4. Natural gas

    Correct answer: LPG: LPG is likely to have the highest gross calorific value per cubic metre of the gaseous fuels listed, since it is stored as a dense liquid.
  7. A boiler mainly consists of which parts?
    1. Fire box
    2. Heat exchanger
    3. Flue
    4. All of these (correct answer)

    Correct answer: All of these: A boiler mainly consists of a fire box, a heat exchanger and a flue, all three parts working together.
  8. Which of these is the safety valve used in a boiler?
    1. Blow off valve
    2. All of these
    3. Feed check valve
    4. Spring loaded valve (correct answer)

    Correct answer: Spring loaded valve: The spring loaded valve is the safety valve used in a boiler, lifting against its spring when pressure rises too high.
  9. In a food industry, when does the break-even point occur?
    1. The annual rate of production equals the assigned value
    2. The total annual product cost equals the total annual sales (correct answer)
    3. The annual profit equals the expected value
    4. The annual sales equal the fixed costs

    Correct answer: The total annual product cost equals the total annual sales: In a food industry the break-even point occurs when the total annual product cost equals the total annual sales, so profit is zero.
  10. What is true of the solvent used in extractive distillation?
    1. Does not alter the relative volatility of the original components
    2. Forms a low boiling azeotrope
    3. Forms a high boiling azeotrope
    4. Is of low volatility (correct answer)

    Correct answer: Is of low volatility: The solvent used in extractive distillation is of low volatility, so it stays in the liquid phase and changes the relative volatility of the mixture.
  11. Which pump is used for boiler feed water applications?
    1. Gear pump
    2. Metering pump
    3. Plunger pump (correct answer)
    4. All of these

    Correct answer: Plunger pump: The plunger pump is used for boiler feed water applications, since it delivers water at high pressure against the boiler.
  12. In a blower the pressure ratio is below 3, while in a compressor it may be 10 or more. What is this ratio called?
    1. Cavitation
    2. Decavitation
    3. Compression (correct answer)
    4. Expansion

    Correct answer: Compression: This ratio is called compression, the ratio of discharge pressure to suction pressure.
  13. Polished surfaces have what level of emissivity?
    1. High
    2. Moderate
    3. Low (correct answer)
    4. Zero

    Correct answer: Low: Polished surfaces have low emissivity, so they radiate little heat and are used to cut heat loss.
  14. Ribbon blenders are exclusively meant for which duty?
    1. Blending miscible liquids
    2. Mixing non-flowing powders and thin pastes (correct answer)
    3. Batch mixing of liquids
    4. Continuous mixing of liquids

    Correct answer: Mixing non-flowing powders and thin pastes: Ribbon blenders are exclusively meant for mixing non-flowing powders and thin pastes, which their helical ribbon folds over itself.
  15. Traces of solids are removed from a liquid in which equipment?
    1. Rotary vacuum filter
    2. Classifier
    3. Clarifier (correct answer)
    4. Sparkler filter

    Correct answer: Clarifier: Traces of solids are removed from a liquid in a clarifier, which settles out fine suspended matter.
  16. What is the purpose of adding a filter aid?
    1. Increase the rate of filtration directly
    2. Decrease the pressure drop
    3. Increase the porosity of the cake (correct answer)
    4. Act as a support base for the septum

    Correct answer: Increase the porosity of the cake: Adding a filter aid increases the porosity of the cake, keeping channels open so filtration stays fast.
  17. Which is the most common filter aid?
    1. Calcium silicate
    2. Silica gel
    3. Sodium carbonate
    4. Diatomaceous earth (correct answer)

    Correct answer: Diatomaceous earth: Diatomaceous earth is the most common filter aid, the fossil skeletons of diatoms forming a porous cake.
  18. Which statement about a paddle agitator is true?
    1. It moves at very high speed
    2. None of these
    3. It produces axial flow
    4. It is suitable for mixing low-viscosity liquids (correct answer)

    Correct answer: It is suitable for mixing low-viscosity liquids: A paddle agitator is suitable for mixing low-viscosity liquids, turning slowly and sweeping the vessel.
  19. Mesh number indicates the number of openings per what?
    1. Square inch
    2. Linear inch (correct answer)
    3. Square foot
    4. Linear foot

    Correct answer: Linear inch: Mesh number indicates the number of openings per linear inch of screen.
  20. Cyclones are used primarily for separating what?
    1. Solids alone
    2. Solids from fluids (correct answer)
    3. Liquids alone
    4. Solids from solids

    Correct answer: Solids from fluids: Cyclones are used primarily for separating solids from fluids, spinning the stream so the heavier solids fly outward.