Other Food Technology Topics β Part 3
GIFSQ ID: ART-0869
What this quiz covers
This quiz is another mixed round from a food technology course: twenty questions that jump from wheat milling and sensory evaluation to extrusion, vinegar making and launching a new product. The questions look scattered, but they share one theme: the practical facts a food technologist uses every day, from a roll speed ratio to a supply chain definition. Each question is short, but behind each one sits a process, a number or a definition worth knowing.
You will start in the wheat mill, with break-roll ratios and milling loss, then move to the senses: texture words, taste buds, papillae and the four basic tastes. Filtration and candy making bring the process side, chocolate liquor brings food rheology, and vinegar brings a neat piece of arithmetic, grain strength. The set closes with the business of food: supply chains, product launches, industry responsibilities and the real constraints on food processing.
Why mixed rounds matter
A food technologist rarely works in one corner only. The same day can bring a milling number, a sensory panel and a question about why a dough behaves the way it does. Mixed quizzes train that switching, and they expose the gaps a single-topic quiz would miss. That is why the quiz mixes the laboratory with the factory floor and the market.
How to use this quiz
Take it cold first, then read the explanations below the player. Each answer explains why the correct choice is right in plain words, so a wrong answer becomes a fact you keep. Use it as a revision round before an exam or a job interview, and come back to the questions you missed.
Choose how you want to play
Note: the player shuffles the questions and the answer options on every attempt, so the numbers in the player will not match the numbers in the explanations below. Match each answer by its wording.
Answer explanations
Worked through the quiz? Here is why each correct answer is correct: the concept behind it, in plain terms.
- About what is the differential speed ratio of the break rolls in a wheat mill?
Correct answer: 2.5:1: Fluted first-break rolls run a fast-to-slow differential near 2.5 to 1, shearing the kernel open while keeping bran in large pieces. - What is the moisture lost by evaporation during milling called?
Correct answer: Milling loss: The weight lost between wheat intake and flour output, mostly moisture evaporated by grinding heat, is booked as milling loss. - Which materials are commonly used inside a filtration unit?
Correct answer: Charcoal and sand: A classic filter bed layers sand, which strains out particles, with charcoal, which adsorbs colour, odour and organics. - To keep crystal size small in candy making, which interfering agent is added?
Correct answer: Cream of tartar: Cream of tartar inverts some sucrose to glucose and fructose, and the mixed sugars crystallise poorly, keeping candy crystals small and smooth. - Words like chewy, fibrous, gritty, mealy, and sticky describe which food attribute?
Correct answer: Texture: Chewy, fibrous, gritty, mealy and sticky are all mouthfeel words, so they describe texture; flavour covers taste and aroma. - What is the science of judging a food's smell, appearance, taste, and texture?
Correct answer: Sensory evaluation: Sensory evaluation is the science of judging food by the senses, smell, appearance, taste and texture, using trained panels or consumers. - Taste buds are located mainly on which structure?
Correct answer: Tongue: Taste buds sit mainly on the tongue, in the fungiform, foliate and circumvallate papillae. - What are the basic taste types?
Correct answer: Bitter, sour, sweet, and salty: The classic model counts four basic tastes: sweet, sour, salty and bitter; spicy or hot is a touch sensation, not a taste. - The little bumps visible on the tongue are called what?
Correct answer: Papillae: The visible bumps on the tongue are papillae; the microscopic taste buds sit inside their walls. - Supply chain management represents which of these?
Correct answer: Management of the whole production set; manufacturing and transformation; distribution and marketing: Supply chain management spans the whole chain, production, manufacturing and transformation, plus distribution and marketing, so only the combined option covers it. - During extrusion cooking, starch does what?
Correct answer: Gelatinizes: Extrusion cooking gelatinizes starch, granules swelling and rupturing under heat, moisture and shear. - How many basic tastes can the tongue perceive in the classic model?
Correct answer: 4: The classic taste model counts four basic tastes the tongue can perceive: sweet, sour, salty and bitter. - Chocolate liquor is which type of food?
Correct answer: Semi-plastic food: Chocolate liquor, cocoa solids suspended in cocoa butter, holds its shape yet flows under stress, so it behaves as a semi-plastic food. - What is used to avoid friction in high-temperature direct extrusion?
Correct answer: Molten glass: In high-temperature direct extrusion of metals, molten glass is the lubricant that survives the heat where oils and waxes would fail. Note this is metals practice, not food extrusion. - What grain strength is a vinegar with 5 g of acetic acid per 100 mL?
Correct answer: 50 grain: Vinegar grain is ten times the percent acidity, so 5 g per 100 mL, or 5 percent, is 50-grain vinegar. - What does the rate of converting alcohol to acetic acid depend on?
Correct answer: All of these: Acetobacter converts alcohol to acetic acid faster with active organisms, more alcohol and air-exposed surface, and the right temperature, so all three govern the rate. - Before launching a new food product, which information is needed?
Correct answer: All of these: A new product launch needs specifications, process development, and plant location and operation planning, all three, not any one alone. - What is true of the extrusion process?
Correct answer: No time is lost when changing shape: Extrusion wins on quick die changes, switching shapes with practically no lost time compared with re-tooling a rolling line. Note the wording is loose: a die change still takes some time, it is fast relative to rolling. - Which of these are major responsibilities of the food industry?
Correct answer: All of these: GMP compliance, product recall systems and customer service are all major responsibilities of the food industry. - Which of these is not a key constraint on the food processing industry?
Correct answer: Low demand: Poor quality control, high packaging cost and weak cold storage are textbook constraints on food processing, while demand for processed food is large and growing.