Login Register

Access the GIFSQ Portal

Select your user type to log in or register a new account.

Student Portal

Access your food safety courses and exams.

Instructor Portal

Manage courses, view student submissions, and grade quizzes.

Company Portal

Manage corporate setup, view employee logs, and access QA services.

Water Treatment Quiz

GIFSQ ID: ART-1026

Test your knowledge with this free 20-question Food Technology quiz (Part 2). Choose the correct answer for each…

What this quiz covers

Water is the first ingredient in most food plants, and its chemistry decides whether boilers scale up, soap lathers, and drinks taste right. This quiz tests the working knowledge of water treatment: temporary and permanent hardness, zeolite softening, coagulation with alum, sedimentation, trickling filters, and UV disinfection. Hardness is the thread that ties the first half together: what causes it, what it does to boilers and washing, and how each kind is removed.

Twenty questions walk the treatment train in order. Zeolite removes both kinds of hardness by swapping calcium and magnesium for sodium. Temporary hardness comes from bicarbonates and leaves on boiling, while permanent hardness comes from chlorides and sulphates and stays. Then the plant steps: coagulation and flocculation, sedimentation of dense particles, biological treatment on trickling filters, and UV light as the physical germicide. The set closes with the UV ladder itself: vacuum UV at 100 to 200 nm, UVC at 200 to 280, UVB at 280 to 315, and UVA at 315 to 400.

Concepts you will need

Hold two pairs apart. First, temporary hardness is bicarbonate hardness, removed by boiling or by zeolite, while permanent hardness is chloride and sulphate hardness, removed by zeolite or by a sequestering agent such as sodium hexametaphosphate. Second, UV bands run in order of wavelength: vacuum UV is shortest, then UVC, UVB, and UVA nearest visible light. The germicidal band is UVC, near 254 nm.

How to use this quiz

You get 20 seconds per question and one attempt at each answer, so learn the hardness pair first: bicarbonates cause temporary hardness, chlorides and sulphates cause permanent hardness. Then fix the UV ladder in your head: 100, 200, 280, 315, 400 nm are the five boundary numbers, and each band sits between two of them. When a question names a treatment step, ask whether it is physical, chemical, or biological before you pick. Then retake the quiz and check the ladder holds.

Water Treatment Quiz
Uncategorized

Choose how you want to play

Sound effects
πŸ”ˆ Volume
Show explanations
πŸ”Š Auto-read every question
Reading speed

Answer explanations

Worked through the quiz? Here is why each correct answer is correct: the concept behind it, in plain terms.

  1. What does zeolite remove?
    Correct answer: Both temporary and permanent hardness. Zeolite softening swaps the calcium and magnesium ions in hard water for sodium ions held on the zeolite bed, and it works on both kinds of hardness: the bicarbonate hardness that boiling removes and the chloride and sulphate hardness that boiling cannot remove. One bed handles both, which is why zeolite is the standard softener.
  2. What does conventional tertiary treatment involve?
    Correct answer: Chemical coagulation and flocculation. Note: the quiz keys chemical coagulation and flocculation as conventional tertiary treatment. Most treatment textbooks place coagulation and flocculation earlier, in primary treatment, and use tertiary treatment for polishing steps such as filtration and disinfection. Learn the keyed answer as this question's own wording.
  3. Which of these is not an effect of hardness of water?
    Correct answer: Makes it unfit for drinking. Hard water leaves scale in boilers, makes cooking difficult, and stops soap lathering, but it is not classed as unfit for drinking: the calcium and magnesium in it are not a health hazard at ordinary hardness. That is why making water unfit for drinking is the odd one out.
  4. What can permanent hard water be softened by passing it through?
    Correct answer: Sodium hexametaphosphate. Sodium hexametaphosphate, sold as Calgon, sequesters calcium and magnesium: it holds them in soluble complexes so they cannot form scale or soap curd. That is how it softens permanent hard water, by keeping the hardness ions dissolved rather than removing them.
  5. What causes temporary hardness of water?
    Correct answer: Calcium and magnesium bicarbonates. Temporary hardness comes from calcium and magnesium bicarbonates dissolved in the water. On boiling, the bicarbonates break down into insoluble carbonates, which settle out as scale, so the hardness disappears with heat.
  6. What is permanent hardness of water due to?
    Correct answer: Chlorides and sulphates of calcium and magnesium. Permanent hardness stays after boiling because it comes from the chlorides and sulphates of calcium and magnesium, which do not break down on heating. Only softening or sequestration removes it.
  7. Which type of hardness is caused by the soluble sulphates or chlorides of calcium and magnesium?
    Correct answer: Permanent. Soluble sulphates or chlorides of calcium and magnesium cause permanent hardness: the same pair as the last question, asked the other way round. Bicarbonates give temporary hardness instead.
  8. Which of these treatments are used in purification of water?
    Correct answer: All of the above. Purification of water uses physical treatment such as screening, sedimentation, and filtration, chemical treatment such as coagulation and disinfection, and biological treatment such as trickling filters and activated sludge. All three kinds are used, so all of the above is the answer.
  9. Trickling filters are used for the clarification of what?
    Correct answer: Sewage. Trickling filters are beds of stone or plastic media covered with a microbial film, and sewage trickles over them while the microbes digest the dissolved waste. They clarify sewage, not syrups, wine, or fruit juices.
  10. Which coagulant do water treatment plants rely on most for removing suspended impurities?
    Correct answer: Alum. Alum, aluminium sulphate, is the coagulant water treatment plants rely on most: in water it forms a sticky floc of aluminium hydroxide that gathers suspended particles so they settle out. Bleaching powder and chlorine disinfect, they do not coagulate.
  11. Sedimentation in wastewater treatment is used to remove what?
    Correct answer: Particles more dense than water. Sedimentation uses gravity: particles more dense than water sink to the bottom as sludge, while lighter material floats and is skimmed off. Dissolved gases and light particles are not removed this way.
  12. Which physical method is used as a germicide in modern drinking water treatment?
    Correct answer: UV radiation. UV radiation is the physical germicide in modern drinking water treatment: it damages the DNA of microbes so they cannot reproduce, without adding any chemical to the water. Chlorination and bleaching powder are chemical methods, not physical ones.
  13. Which ions does zeolite softening remove from hard water?
    Correct answer: Calcium and magnesium ions. Zeolite softening removes calcium and magnesium ions from hard water, exchanging them for sodium ions on the zeolite. The hardness ions stay on the bed until it is regenerated with brine, and sodium passes into the water.
  14. In water treatment, which stage comes second when turning sewage water into drinking water?
    Correct answer: Biodegradation. Note: the quiz follows its own stage order here, with biodegradation second after skimming, then settling, then filtration. Many textbooks put primary settling before the biological step, so learn this sequence as the quiz's own order.
  15. A trickling filter system belongs to which step of wastewater treatment?
    Correct answer: Secondary treatment. A trickling filter is a biological treatment unit: microbes on the filter media digest dissolved organic waste. Biological treatment of sewage is the secondary stage, after primary settling and before tertiary polishing.
  16. What wavelength range does UV light cover?
    Correct answer: 100–400 nm. UV light covers 100 to 400 nm, from vacuum UV at the short end to UVA at the long end, just beyond visible violet light. The whole band sits below visible light in wavelength.
  17. What wavelength range does UVA radiation span?
    Correct answer: 315–400 nm. UVA is the longest UV band, 315 to 400 nm, nearest to visible light. It is the least energetic of the UV bands and the one that reaches us most in sunlight.
  18. What wavelength range does UVB radiation span?
    Correct answer: 280–315 nm. UVB is the middle band, 280 to 315 nm. It carries more energy than UVA and is the band most linked to sunburn.
  19. What wavelength range does UVC radiation span?
    Correct answer: 200–280 nm. UVC is 200 to 280 nm, the germicidal band: its peak near 254 nm is what UV disinfection lamps use to damage microbial DNA.
  20. What wavelength range does vacuum UV radiation span?
    Correct answer: 100–200 nm. Vacuum UV is the shortest band, 100 to 200 nm. Air absorbs it so strongly that it only travels in a vacuum or over very short paths, which is where its name comes from.