Login Register

Access the GIFSQ Portal

Select your user type to log in or register a new account.

Student Portal

Access your food safety courses and exams.

Instructor Portal

Manage courses, view student submissions, and grade quizzes.

Company Portal

Manage corporate setup, view employee logs, and access QA services.

Thermal Analysis – Part 5

GIFSQ ID: ART-0712

What this quiz covers

Note the title and the web address do not match on this quiz: it is titled Thermal Analysis Part 5 and its address says manufacture-2-quiz, while the questions cover differential scanning calorimetry, particle size, and furfural analysis. The content here follows the questions, not the title or the address.

You will meet DSC, the thermal technique that plots heat flow against temperature, and learn what sits inside the instrument: furnace, cooling unit, and two pans. You will meet laser light scattering for particle size, and the furfural tests that use both spectrophotometric and chromatographic methods.

What DSC can and cannot do

DSC measures heat: it gives onset temperature, heat capacity, and enthalpy, and it can study denaturation, gelatinisation, retrogradation, phase transitions, glass transitions, and fat polymorphism. It does not measure refractive index, ripening index, or microbiology. When a question asks what DSC can analyse, check whether the thing involves heat flow: if it does, DSC can study it, and if it does not, DSC cannot. Sketch the DSC curve once on paper, with heat flow on the vertical axis and temperature on the horizontal axis, and the plot questions will answer themselves.

How to use this quiz

One caution on this set: the quiz key counts NIR among the particle-size analysers, but NIR is a spectroscopic technique, not a particle-size analyser in the usual sense, so learn DLS and LALLS as the particle-size methods and treat the NIR listing as the key’s own grouping. For the rest, answer from the instrument: furnace heats, cooling unit cools, and the plot is heat flow against temperature. After you finish, read the explanations below the player: each one states the correct answer and the reason in plain words, so a wrong answer becomes a fact you can carry into the next lab session or exam.

Thermal Analysis – Part 5
Uncategorized

Choose how you want to play

Sound effects
πŸ”ˆ Volume
Show explanations
πŸ”Š Auto-read every question
Reading speed

Answer explanations

Worked through the quiz? Here is why each correct answer is correct: the concept behind it, in plain terms.

  1. Which of these is a particle-size technique?
    Correct answer: Laser light scattering: Laser light scattering is a particle-size technique: it measures how particles scatter a laser beam to work out their size. A rheometer measures flow, not particle size.
  2. Which of these are particle-size analysers?
    Correct answer: All of these: LALLS and DLS are particle-size analysers, and the quiz key also groups NIR with them, so the answer covers all of these. Note that NIR on its own is a spectroscopic technique, not a particle-size analyser in the usual sense, and DLS and LALLS are the true particle-size methods here.
  3. What kind of technique is DSC?
    Correct answer: Thermal: DSC is a thermal technique: differential scanning calorimetry measures heat flow as temperature changes. It is not an irradiation, spectroscopic, or microscopic technique.
  4. Which of these is not a thermal treatment?
    Correct answer: Fermentation: Fermentation is not a thermal treatment: it is a biochemical process driven by microbes, not by heat or cold. Roasting and steaming use heat, and refrigeration uses cold, so they are thermal treatments.
  5. Which of these falls outside thermal treatments?
    Correct answer: None β€” all are thermal treatments: None of the listed items falls outside thermal treatments: freezing, pasteurisation, and thermisation are all temperature-based treatments. That is why the answer says none of them falls outside the group.
  6. Which of these is fitted in a differential scanning calorimeter?
    Correct answer: Furnace: A furnace is fitted in a differential scanning calorimeter, and it heats the sample and the reference as the temperature program runs. An amplifier, a spindle, and a probe are not the heating part of a DSC.
  7. Which of these sits inside a differential scanning calorimeter?
    Correct answer: Cooling unit: A cooling unit sits inside a differential scanning calorimeter, to bring the temperature down and to control cooling runs. A needle, a transducer, and a transformer are not part of the DSC in this way.
  8. Which of these heats the sample in a differential scanning calorimeter?
    Correct answer: Furnace: The furnace heats the sample in a differential scanning calorimeter, raising its temperature on a controlled program. An eye-piece and a lens belong to microscopes, not to a DSC.
  9. Which of these is housed in a differential scanning calorimeter?
    Correct answer: Cooling unit: A cooling unit is housed in a differential scanning calorimeter, alongside the furnace, so the instrument can run both heating and cooling programs. Z-blades belong to mixers, not to a DSC.
  10. Which pans does a DSC use?
    Correct answer: Both of these: A DSC uses both pans: the sample pan, usually aluminium, and the reference pan, run side by side so the instrument can compare them. One pan alone cannot give a DSC measurement.
  11. What does a DSC plot show on its axes?
    Correct answer: Heat flow vs temperature: A DSC plot shows heat flow against temperature: the vertical axis is heat flow and the horizontal axis is temperature. Temperature against pressure or volume, and heat flow against pressure, are not DSC plots.
  12. What does DSC analysis yield?
    Correct answer: All of these: DSC analysis yields all of these: onset temperature, heat capacity, and enthalpy, all read from the heat flow curve. Each one is a real output of a DSC run.
  13. DSC can analyse which of these: refractive index, ripening index or denaturation?
    Correct answer: Denaturation: DSC can analyse denaturation: protein unfolding takes in or gives out heat, which DSC detects. Refractive index and ripening index do not involve heat flow, so DSC cannot measure them.
  14. DSC is most often used to study which of these: caramelisation or gelatinisation?
    Correct answer: Gelatinisation: DSC is most often used to study gelatinisation, the heat-driven swelling and melting of starch granules. Caramelisation can also involve heat, but gelatinisation is the classic DSC study in foods.
  15. DSC can analyse which of these: oxidation, microbiology or retrogradation?
    Correct answer: Retrogradation: DSC can analyse retrogradation, the re-forming of starch structure on storage, because it involves heat changes. Oxidation is studied by other methods, and microbiology is not a heat flow measurement.
  16. DSC can analyse which of these: phase transitions or glass transitions?
    Correct answer: Both of these: DSC can analyse both phase transitions and glass transitions, since both show up as changes in heat flow with temperature. Neither one is outside what DSC can do.
  17. What can fat analysis by DSC reveal?
    Correct answer: Polymorphism: Fat analysis by DSC can reveal polymorphism, the different crystal forms a fat can take, since each form melts at its own temperature. Rancidity is a chemical change, not a DSC melting signal.
  18. DSC of fats is useful for examining what?
    Correct answer: Solid fat index: DSC of fats is useful for examining the solid fat index, the share of fat that is solid at a given temperature, read from the melting curve. Oxidation is not what the DSC melting run measures here.
  19. How are furfural derivatives analysed?
    Correct answer: Both of these: Furfural derivatives are analysed by both methods: flow injection analysis and the colorimetric method both work for them. Neither method alone tells the whole story, so the answer covers both.
  20. Which types of method analyse furfural derivatives?
    Correct answer: Both of these: Furfural derivatives are analysed by both spectrophotometric and chromatographic methods. Each approach measures them in its own way, so the answer covers both types.