Physical Properties – Part 5
GIFSQ ID: ART-0767
What this quiz covers
Milk looks simple in a glass, but a dairy lab measures it with a whole set of physical tests, and this quiz walks through them. The first questions are about density: fat is the lightest part of milk, so removing it leaves a denser liquid behind, and among the milk solids the dissolved mineral salts are the densest of all. That is why skim milk reads higher on a lactometer than whole milk, and why buffalo milk, with its extra solids, reads higher than cow milk.
The next group covers freezing point, surface tension and pH. Dissolved lactose and salts push milk’s freezing point below zero, and the size of that drop is so steady that a cryoscope can spot watered milk from a tiny change. Milk is an oil-in-water emulsion, fat droplets floating in water, which is why cream rises and why homogenisation matters. Its surface tension sits below that of pure water, its pH sits near 6.8, and its water activity is almost 1.
Light, powders and the second half
The second half of the quiz turns to light and powders. Refractive index is measured at the sodium D line, 589 nm, because a single standard wavelength keeps results comparable. Translucency, gloss and fluorescence are all optical properties, they describe how a material handles light, not how it flows or breaks. Powdered foods bring their own vocabulary: agglomeration, particle size distribution and segregation.
How to use this quiz
Take the twenty questions in order, because the first half builds one picture of milk and the second half builds a second picture of light and powders. For the milk numbers, anchor on a few: freezing point depression near 0.55 degrees C, freezing point near minus 0.53 degrees C, pH near 6.8, water activity near 0.995, and fat globules near 920 kg per cubic metre. For the light questions, remember that anything describing how light bends, passes through, reflects or glows is optical.
Choose how you want to play
Note: the player shuffles the questions and the answer options on every attempt, so the numbers in the player will not match the numbers in the explanations below. Match each answer by its wording.
Answers explained
Each answer below repeats the question, gives the correct answer from the quiz bank, and explains the science behind it in plain words.
- Fat lightens milk, so removing it should densify what remains. Which of these has the highest specific gravity?
Correct answer: Skim milk
Why: removing the light fat leaves the denser solids behind, so skim milk has the highest specific gravity of the four. - Each milk constituent has its own density. Which milk constituent has the highest specific gravity?
Correct answer: Mineral salts
Why: dissolved mineral salts are the densest milk constituent, denser than protein, lactose or fat. - Pure water freezes at 0°C, but milk is a solution of sugars and salts. Milk freezes at a temperature that is what relative to pure water?
Correct answer: Lower than water
Why: dissolved lactose and salts depress the freezing point, so milk freezes below 0 degrees C. - A cryoscope measures how far below 0°C milk freezes. The average freezing point depression of cow milk is about how much?
Correct answer: 0.547°C
Why: cow milk’s dissolved solids depress its freezing point by about 0.547 degrees C, the figure the cryoscope is calibrated on. - Buffalo milk goes into the cryoscope next. Roughly how large is its average freezing point depression?
Correct answer: 0.549°C
Why: buffalo milk’s extra solids push its freezing point depression to about 0.549 degrees C. - Milk looks uniform because fat droplets float suspended in water. Milk is which type of emulsion?
Correct answer: Oil in water
Why: milk is fat droplets dispersed in water, an oil-in-water emulsion. - What is the approximate surface tension of milk at 20 °C?
Correct answer: 40 to 60 dynes/cm
Why: milk’s surface tension at 20 degrees C is about 40 to 60 dynes per cm, well below water’s 72. - What is the approximate freezing point of milk?
Correct answer: -0.532 °C
Why: milk freezes at about minus 0.532 degrees C, the table’s freezing-point figure. Note that this sits close to, but not exactly on, the 0.547 degree depression in question 4, so the bank’s two figures differ slightly. - Around what is the pH of natural milk?
Correct answer: 6.8
Why: fresh milk sits near pH 6.8, just on the acid side of neutral. - What is the approximate density of milk fat globules at 20 °C?
Correct answer: 920 kg/m³
Why: milk fat globules are lighter than water, about 920 kg per cubic metre at 20 degrees C, which is why cream rises. - What is the approximate density of casein micelles at 20 °C?
Correct answer: 1100 kg/m³
Why: casein micelles are denser than water, about 1100 kg per cubic metre at 20 degrees C. - What is the approximate water activity of milk?
Correct answer: 0.995
Why: milk is almost pure water in activity terms, about 0.995, which is why it spoils fast without chilling or heat treatment. - Milk’s refractive index is generally measured at which wavelength?
Correct answer: 589 nm
Why: refractive index is measured at the sodium D line, 589 nm, so results are comparable. - Which of these are properties of powdered foods?
Correct answer: All of these
Why: powdered foods show agglomeration, a particle-size spread and segregation together. - What does agglomeration in powdered foods relate to?
Correct answer: All of these
Why: agglomeration is controlled size enlargement, done for better flow and better dispersibility together. - Refractive index is which kind of material property?
Correct answer: Optical
Why: refractive index describes how light bends, an optical property. - Translucency is which kind of material property?
Correct answer: Optical
Why: translucency is about light transmission, an optical property. - Gloss is which kind of material property?
Correct answer: Optical
Why: gloss is the way a surface reflects light, an optical property. - Fluorescence is which kind of material property?
Correct answer: Optical
Why: fluorescence is light emission, an optical property. - Which of these processes change with wavelength?
Correct answer: All of these
Why: absorption, transmittance and reflectance all vary with wavelength, and that is why colour exists.