Penicillin Quiz
GIFSQ ID: ART-1005
What this quiz covers
This quiz tells the whole story of penicillin, from a mouldy plate in 1928 to the modern fermenter. Fleming was studying Staphylococcus when a Penicillium notatum spore drifted onto his plate, and the clear zone around the mould became the first antibiotic. The 1945 Nobel Prize went to Fleming, Florey and Chain together: discovery, purification and proof that it could cure infections. The molecule’s core is 6-aminopenicillanic acid, two rings fused, a beta-lactam joined to a thiazolidine, and sodium penicillin G weighs about 356.4 daltons.
The second half is the factory: production moved from Penicillium notatum to the higher-yielding Penicillium chrysogenum, with the Wisconsin Q176 lineage behind most industrial strains. Penicillin is a secondary metabolite, made after growth stops, fermented at 25 to 28 degrees with aeration near 1 to 2 volumes per volume per minute. Recovery extracts the antibiotic into butyl or amyl acetate at low pH, polishes it by adsorption on charcoal, and finishes with crystallization and drying. Benzyl penicillin comes straight from the fermenter; propicillin and methicillin are semisynthetic, built by adding a synthetic side chain to the fermented nucleus.
Natural, then semisynthetic: the side chain tells them apart
The classification questions are the easiest in the quiz once you know the rule. A penicillin that comes straight from the mould fermentation, such as benzyl penicillin, is natural. Any penicillin built by chemically attaching a synthetic side chain to the fermented 6-APA nucleus, such as propicillin or methicillin, is semisynthetic.
How to use this quiz
Work through all 20 questions in story order, from the discovery plate to the finished powder, and keep the natural versus semisynthetic rule in mind for the last questions. The explanations below give the reason behind each correct answer, so a wrong answer still teaches the step.
Choose how you want to play
Answer explanations
Worked through the quiz? Here is why each correct answer is correct: the concept behind it, in plain terms.
- Alexander Fleming discovered which antibiotic?
Correct answer: Penicillin. Fleming noticed a Penicillium mould growing on his agar plate had killed the surrounding Staphylococcus colonies, and that mould yielded penicillin, described in 1928. - Fleming was working on which bacterium when he discovered penicillin?
Correct answer: Staphylococcus. Fleming was studying Staphylococcus aureus cultures when a mould spore drifted onto one of his plates, and the clear zone around the mould is what drew his attention. - Who shared the Nobel Prize for the discovery of penicillin?
Correct answer: Fleming, Florey and Chain. The 1945 Nobel Prize in Physiology or Medicine was shared by all three: Fleming for the discovery, and Florey and Chain for purifying penicillin and proving it could cure infections. - 6-aminopenicillanic acid (6-APA) consists of which rings?
Correct answer: Both rings fused. The 6-APA nucleus is the fused core of the penicillin molecule: a four-membered beta-lactam ring joined to a five-membered thiazolidine ring. - Penicillin was discovered in which year?
Correct answer: 1928. Fleming observed the mould’s antibacterial effect in September 1928, the accepted discovery year; large-scale therapeutic use came much later, in the 1940s. - Penicillin was originally produced from which mould?
Correct answer: Penicillium notatum. Fleming’s original contaminating mould was identified as Penicillium notatum, the species that produced the penicillin he studied. - Nowadays penicillin is produced from which mould?
Correct answer: Penicillium chrysogenum. Commercial production switched to Penicillium chrysogenum after the NRRL 1951 strain was isolated from a mouldy cantaloupe in Peoria, and its descendants out-yielded P. notatum many times over. - The molecular weight of sodium penicillin G is about what?
Correct answer: 356.4 Da. Sodium penicillin G has the formula C16H17N2NaO4S, which works out to about 356.4 daltons. - Which nitrogen source is documented for penicillin fermentation?
Correct answer: Cottonseed flour. The quiz key is cottonseed flour: it is a documented complex nitrogen source for penicillin fermentation, supplying slow-release nitrogen and growth factors. Corn steep liquor and soybean meal are also documented nitrogen sources, so the question turns on the source the book lists. - Which Penicillium chrysogenum strain lineage is used by most manufacturers?
Correct answer: Wisconsin Q176. The Wisconsin Q176 strain was the key mutant line derived from NRRL 1951, and most industrial high-producing strains descend from it. - Penicillin is which type of metabolite?
Correct answer: Secondary. Penicillin is made mainly after active growth stops, during the production phase of the culture, so it is classified as a secondary metabolite. - The aeration rate during penicillin production is about what?
Correct answer: 1.0-2.0 vvm. Penicillin fermentation is highly aerobic, so sterile air is sparged at about 1 to 2 volumes of air per volume of broth per minute to keep dissolved oxygen high. - Penicillin fermentation runs at about what temperature?
Correct answer: 25-28 Β°C. P. chrysogenum grows and produces penicillin best around 25 to 28 degrees: higher temperatures speed up penicillin breakdown in the broth. - Which penicillin-recovery step removes pyrogens and coloured impurities from the crude extract?
Correct answer: Adsorption. Recovery includes an adsorption step: the crude extract is treated with activated charcoal to pull out pyrogens and coloured impurities. - Penicillin recovery includes which steps?
Correct answer: Both steps. The final recovery stages are crystallization, which isolates penicillin as its sodium or potassium salt, followed by drying the crystals to a stable powder. - Solvent extraction of penicillin is done at which pH?
Correct answer: Low pH. Solvent extraction runs at low pH, around 2 to 2.5, because acidification converts penicillin to its uncharged acid form, which partitions into the organic solvent. - Solvent extraction of penicillin uses which solvents?
Correct answer: Both solvents. Both butyl acetate and amyl acetate are standard organic solvents for pulling penicillin out of the acidified broth, in repeated cycles with back-extraction between passes. - A pharmacy stocks three penicillins: benzyl penicillin, propicillin and methicillin. Which one comes straight from the mould fermentation, with no chemical modification of its side chain?
Correct answer: Benzyl penicillin. Benzyl penicillin, or penicillin G, is the natural product of the mould fermentation, formed directly when phenylacetic acid precursor is fed; propicillin and methicillin carry chemically attached synthetic side chains. - Propicillin is manufactured by attaching a synthetic side chain to the fermented 6-APA nucleus. How is this antibiotic classified?
Correct answer: A semisynthetic penicillin. Propicillin is made by fermenting the 6-APA nucleus and then chemically attaching a phenoxypropionyl side chain, so any penicillin built this way is classified as semisynthetic. - Methicillin carries a bulky synthetic side chain that blocks penicillinase attack. What does that make it?
Correct answer: A semisynthetic penicillin. Methicillin is built on the 6-APA nucleus with a bulky dimethoxybenzoyl side chain added by chemistry, and that bulky side chain shields the beta-lactam ring from penicillinase enzymes.