Other Food Technology Topics – Part 3
GIFSQ ID: ART-0869
What this quiz covers
This quiz is another mixed round from a food technology course: twenty questions that jump from wheat milling and sensory evaluation to extrusion, vinegar making and launching a new product. The questions look scattered, but they share one theme: the practical facts a food technologist uses every day, from a roll speed ratio to a supply chain definition. Each question is short, but behind each one sits a process, a number or a definition worth knowing.
You will start in the wheat mill, with break-roll ratios and milling loss, then move to the senses: texture words, taste buds, papillae and the four basic tastes. Filtration and candy making bring the process side, chocolate liquor brings food rheology, and vinegar brings a neat piece of arithmetic, grain strength. The set closes with the business of food: supply chains, product launches, industry responsibilities and the real constraints on food processing.
Why mixed rounds matter
A food technologist rarely works in one corner only. The same day can bring a milling number, a sensory panel and a question about why a dough behaves the way it does. Mixed quizzes train that switching, and they expose the gaps a single-topic quiz would miss. That is why the quiz mixes the laboratory with the factory floor and the market.
How to use this quiz
Take it cold first, then read the explanations below the player. Each answer explains why the correct choice is right in plain words, so a wrong answer becomes a fact you keep. Use it as a revision round before an exam or a job interview, and come back to the questions you missed.
Choose how you want to play
Answer explanations
Worked through the quiz? Here is why each correct answer is correct: the concept behind it, in plain terms.
- About what is the differential speed ratio of the break rolls in a wheat mill?
Correct answer: 2.5:1. Break rolls — the fluted first-break pairs — run with a fast-to-slow roll speed differential of about 2.5:1, shearing the kernel open while keeping bran in large pieces. Reduction rolls run much lower differentials (around 1.25:1). Sources: flour-milling literature. - What is the moisture lost by evaporation during milling called?
Correct answer: Milling loss. The weight lost between wheat intake and flour output — overwhelmingly moisture evaporated by the heat of grinding — is booked as milling loss. 'Grinding gain' is not a milling term. - Which materials are commonly used inside a filtration unit?
Correct answer: Charcoal and sand. A classic filtration unit layers sand, which strains out particulates, with charcoal (activated carbon), which adsorbs colour, odour and organics — the standard media pair for water filtration. Aluminium chloride is a coagulant, not a filter bed. - To keep crystal size small in candy making, which interfering agent is added?
Correct answer: Cream of tartar. Cream of tartar (potassium acid tartrate) is the classic interfering agent in candy making: it inverts some sucrose to glucose and fructose, and the mixed sugars crystallize poorly, keeping crystals small and the texture smooth. - Words like chewy, fibrous, gritty, mealy, and sticky describe which food attribute?
Correct answer: Texture. Chewy, fibrous, gritty, mealy and sticky are all texture descriptors — the mechanical mouthfeel attributes of a food. Flavour covers taste and aroma; grading and nutritional value are different evaluations entirely. - What is the science of judging a food's smell, appearance, taste, and texture?
Correct answer: Sensory evaluation. Sensory evaluation is the science of judging food by the senses — smell, appearance, taste and texture — using trained panels or consumers. Rheology measures flow and deformation instrumentally, and proximate analysis determines chemical composition. - Taste buds are located mainly on which structure?
Correct answer: Tongue. Taste buds are concentrated on the tongue, housed in the fungiform, foliate and circumvallate papillae, with a few on the soft palate and epiglottis. The nasal turbinates serve smell, not taste. - What are the basic taste types?
Correct answer: Bitter, sour, sweet, and salty. The classic model recognizes four basic tastes: sweet, sour, salty and bitter. Spicy or hot is a trigeminal (touch/irritation) sensation, not a taste. - The little bumps visible on the tongue are called what?
Correct answer: Papillae. The visible bumps on the tongue are papillae; the microscopic taste buds sit within their walls. 'Gustatory pimples' is not a scientific term. - Supply chain management represents which of these?
Correct answer: Management of the whole production set; manufacturing and transformation; distribution and marketing. Supply chain management spans the whole chain: managing the production set, manufacturing and transforming the product, and distributing and marketing it. Any narrower option misses part of the chain. - During extrusion cooking, starch does what?
Correct answer: Gelatinizes. Extrusion cooking gelatinizes starch — granules swell and rupture under heat, moisture and shear. Caramelization needs higher heat with low moisture, and liquefaction describes enzymatic thinning of starch. - How many basic tastes can the tongue perceive in the classic model?
Correct answer: 4. The classic taste model counts four basic tastes perceivable by the tongue: sweet, sour, salty and bitter. (Umami joined as a fifth in modern texts.) - Chocolate liquor is which type of food?
Correct answer: Semi-plastic food. Chocolate liquor (cocoa mass) — cocoa solids suspended in cocoa butter — behaves as a semi-plastic food: it holds its shape yet flows under stress at process temperatures. It is neither a beverage nor a simple plant extract. - What is used to avoid friction in high-temperature direct extrusion?
Correct answer: Molten glass. In high-temperature direct (hot) extrusion, molten glass is the lubricant between billet and tooling — it withstands heat where oils and waxes would fail. (This is the established metals-extrusion practice.) - What grain strength is a vinegar with 5 g of acetic acid per 100 mL?
Correct answer: 50 grain. Vinegar 'grain' is ten times the percent acidity: 5 g of acetic acid per 100 mL is 5% acid, i.e., 50-grain vinegar. Sources: UC Master Food Preservers; vinegar-strength tables. - What does the rate of converting alcohol to acetic acid depend on?
Correct answer: All of these. The rate at which Acetobacter converts alcohol to acetic acid depends on organism activity, on the alcohol available and the air-exposed surface per unit volume (it is an aerobic surface process), and on temperature. All three govern the rate. - Before launching a new food product, which information is needed?
Correct answer: All of these. Launching a food product needs product and raw-material specifications, process-development data, and plant location and operation planning — all three, not any one of them alone. - What is true of the extrusion process?
Correct answer: No time is lost when changing shape. A genuine advantage of extrusion is the quick die change — practically no time is lost switching shapes, unlike re-tooling a rolling line. The 'homogeneous structure' and 'long tool life' options describe the process poorly. - Which of these are major responsibilities of the food industry?
Correct answer: All of these. The food industry's major responsibilities include GMP compliance, product recall systems and customer service — all three, spanning safety, traceability and the consumer. - Which of these is not a key constraint on the food processing industry?
Correct answer: Low demand. Inadequate quality control, high packaging cost and poor cold-chain infrastructure are textbook constraints on food processing. Low demand is not one — demand for processed food is large and growing.