Login Register

Access the GIFSQ Portal

Select your user type to log in or register a new account.

Student Portal

Access your food safety courses and exams.

Instructor Portal

Manage courses, view student submissions, and grade quizzes.

Company Portal

Manage corporate setup, view employee logs, and access QA services.

Other Food Engineering Topics – Part 3

GIFSQ ID: ART-0824

What this quiz covers

This quiz ranges across the food plant: supercritical fluids, natural convection, powders, biogas, fuels and boilers. At supercritical temperature, carbon dioxide acts as a supercritical fluid. Natural convection is characterised by the Grashof number, and the angle formed by pouring a powder into a heap on a flat surface is the angle of repose. The digester is the heart of a biogas plant, the calorific value of natural gas is about 50 megajoules per kilogram, and LPG has the highest gross calorific value per cubic metre of the gaseous fuels listed.

Boilers and break-even come next. A boiler mainly consists of a fire box, a heat exchanger and a flue, and the safety valve used in a boiler is the spring loaded valve. In a food industry the break-even point occurs when the total annual product cost equals the total annual sales. The solvent used in extractive distillation is of low volatility, the plunger pump feeds boiler water, and the pressure ratio below 3 in a blower and 10 or more in a compressor is called compression.

Filters, blenders, screens

Polished surfaces have low emissivity, so they radiate little heat. Ribbon blenders are exclusively meant for mixing non-flowing powders and thin pastes. Traces of solids are removed from a liquid in a clarifier, and adding a filter aid increases the porosity of the cake. Diatomaceous earth is the most common filter aid. A paddle agitator is suitable for mixing low-viscosity liquids, mesh number indicates the number of openings per linear inch, and cyclones are used primarily for separating solids from fluids.

How to use this quiz

Learn the numbers as a short table before you start: natural gas about 50 megajoules per kilogram, and the blower ratio below 3 against the compressor at 10 or more. Then keep the filter pair together: the clarifier removes traces of solids, and the filter aid keeps the cake porous. After you finish, read the explanations below the player: each one states the correct answer and the reason in plain words, so a wrong answer becomes a fact you can carry into the next lab session or exam.

Other Food Engineering Topics – Part 3
Uncategorized

Choose how you want to play

Sound effects
🔈 Volume
Show explanations
🔊 Auto-read every question
Reading speed

Answer explanations

Worked through the quiz? Here is why each correct answer is correct: the concept behind it, in plain terms.

  1. At supercritical temperature, carbon dioxide acts as what?
    1. A high density liquid
    2. A tightly packed solid
    3. A supercritical fluid (correct answer)
    4. A fast moving gas

    Correct answer: A supercritical fluid. Above its critical temperature and pressure (31.1°C and 73.8 bar), carbon dioxide becomes a supercritical fluid — dense like a liquid yet diffusive like a gas. That dual character lets it dissolve flavors and caffeine the way liquid solvents do, then vanish completely when depressurized. Decaffeination and hop extraction run on this trick.
  2. Natural convection is characterised by which dimensionless number?
    1. Peclet number
    2. Prandtl number
    3. Reynolds number
    4. Grashof number (correct answer)

    Correct answer: Grashof number. Natural convection — flow driven by buoyancy from temperature differences, with no fan or pump — is characterized by the Grashof number. It plays the role the Reynolds number plays in forced flow: the ratio of buoyancy to viscous forces. Hot air rising off a cooling loaf is Grashof-number territory.
  3. The angle formed by pouring a powder into a heap on a flat surface is known as what?
    1. Contact angle
    2. Angle of repose (correct answer)
    3. Angle of nip
    4. Critical angle

    Correct answer: Angle of repose. Pour powder onto a flat surface and the heap settles at a characteristic slope: the angle of repose. It measures how the powder flows — free-flowing granules give a shallow angle, cohesive powders a steep one. Hopper designers must know it or the powder bridges and jams.
  4. Which part is considered the heart of a biogas plant?
    1. Inlet pipe
    2. Mixing tank
    3. Outlet pipe
    4. Digester (correct answer)

    Correct answer: Digester. The digester is the heart of a biogas plant: the sealed tank where anaerobic bacteria break down dung and waste into methane and carbon dioxide. Pipes and mixing tanks are accessories; the biology happens in the digester. Gas yield depends on its temperature, retention time, and feeding.
  5. The calorific value of natural gas is about how many MJ per kg?
    1. 80
    2. 70
    3. 60
    4. 50 (correct answer)

    Correct answer: 50. Natural gas — mostly methane — releases about 50 megajoules per kilogram burned (gross calorific value). That is why it out-heats coal and oil per unit mass: methane's four hydrogens per carbon pack in more energy. Burner and engine sizing starts from this figure.
  6. Which gaseous fuel is likely to have the highest gross calorific value per cubic metre?
    1. Sewage gas
    2. Producer gas
    3. LPG (correct answer)
    4. Natural gas

    Correct answer: LPG. Per cubic meter, LPG (liquefied petroleum gas) carries the highest gross calorific value of the listed fuels — around 90-plus MJ/m³, well above natural gas near 38 and far above the dilute producer and sewage gases. Its propane and butane molecules are energy-dense. That is why a small LPG cylinder outlasts a much larger volume of biogas.
  7. A boiler mainly consists of which parts?
    1. Fire box
    2. Heat exchanger
    3. Flue
    4. All of these (correct answer)

    Correct answer: All of these. A boiler is a fire box (where fuel burns), a heat exchanger (where water takes up the heat), and a flue (where exhaust gases leave) — all three. Remove any one and it is not a boiler. The question tests whether you see the boiler as a complete system.
  8. Which of these is the safety valve used in a boiler?
    1. Blow off valve
    2. All of these
    3. Feed check valve
    4. Spring loaded valve (correct answer)

    Correct answer: Spring loaded valve. The spring-loaded safety valve is the boiler safety valve in everyday service: a spring holds it shut until steam pressure overcomes the spring force, then it pops open to vent. It reseats itself when pressure normalizes. Blow-off and feed check valves do different jobs.
  9. In a food industry, when does the break-even point occur?
    1. The annual rate of production equals the assigned value
    2. The total annual product cost equals the total annual sales (correct answer)
    3. The annual profit equals the expected value
    4. The annual sales equal the fixed costs

    Correct answer: The total annual product cost equals the total annual sales. The break-even point is where total annual product cost equals total annual sales — the factory earns exactly what it spends, profit zero. Produce less and it loses money; produce more and profit begins. Every feasibility study locates this point first.
  10. What is true of the solvent used in extractive distillation?
    1. Does not alter the relative volatility of the original components
    2. Forms a low boiling azeotrope
    3. Forms a high boiling azeotrope
    4. Is of low volatility (correct answer)

    Correct answer: Is of low volatility. In extractive distillation, the added solvent must be of low volatility — far less volatile than either component being separated. It stays in the liquid, preferentially holding back one component and shifting the relative volatility. A volatile solvent would simply distill off and defeat the purpose.
  11. Which pump is used for boiler feed water applications?
    1. Gear pump
    2. Metering pump
    3. Plunger pump (correct answer)
    4. All of these

    Correct answer: Plunger pump. Plunger (reciprocating) pumps serve boiler feed duty: each stroke displaces a fixed volume of water and forces it into the boiler against full steam pressure. Positive displacement lets them build the high heads feed service demands. Standard boiler references list the reciprocating plunger pump among the usual boiler feed pumps.
  12. In a blower the pressure ratio is below 3, while in a compressor it may be 10 or more. What is this ratio called?
    1. Cavitation
    2. Decavitation
    3. Compression (correct answer)
    4. Expansion

    Correct answer: Compression. That pressure ratio — discharge pressure over suction pressure — is the compression ratio. Blowers stay below about 3; true compressors reach 10 or more. The number tells you immediately which machine you are dealing with.
  13. Polished surfaces have what level of emissivity?
    1. High
    2. Moderate
    3. Low (correct answer)
    4. Zero

    Correct answer: Low. Polished surfaces have low emissivity: their mirror finish reflects thermal radiation instead of emitting it, with emissivity values near 0.03–0.1 for polished metals. That is why cryogenic vessels and thermos flasks are silvered. A rough black surface, by contrast, approaches an emissivity of 1.
  14. Ribbon blenders are exclusively meant for which duty?
    1. Blending miscible liquids
    2. Mixing non-flowing powders and thin pastes (correct answer)
    3. Batch mixing of liquids
    4. Continuous mixing of liquids

    Correct answer: Mixing non-flowing powders and thin pastes. Ribbon blenders are built for mixing non-flowing powders and thin pastes — the double helical ribbon sweeps material that would otherwise sit dead in the trough. They are not for thin liquids, which need faster impellers. Dry cake mix and dough-like pastes are their home ground.
  15. Traces of solids are removed from a liquid in which equipment?
    1. Rotary vacuum filter
    2. Classifier
    3. Clarifier (correct answer)
    4. Sparkler filter

    Correct answer: Clarifier. A clarifier removes mere traces of solids from a liquid — polishing it bright. Thickeners concentrate heavy slurries; filters handle larger loads. When the job is "almost clear, make it crystal," the clarifier is the tool.
  16. What is the purpose of adding a filter aid?
    1. Increase the rate of filtration directly
    2. Decrease the pressure drop
    3. Increase the porosity of the cake (correct answer)
    4. Act as a support base for the septum

    Correct answer: Increase the porosity of the cake. A filter aid increases the porosity of the cake: its rigid, irregular particles prop the cake open so liquid keeps flowing through. Without it, fine or compressible solids pack into an impermeable layer and filtration stalls. Faster filtration is the result, not the direct mechanism.
  17. Which is the most common filter aid?
    1. Calcium silicate
    2. Silica gel
    3. Sodium carbonate
    4. Diatomaceous earth (correct answer)

    Correct answer: Diatomaceous earth. Diatomaceous earth — kieselguhr — is the most common filter aid in food processing, from beer and wine polishing to sugar refining. Its microscopic porous skeletons give enormous surface area at low cost. Food-grade grades are standardized for this exact use.
  18. Which statement about a paddle agitator is true?
    1. It moves at very high speed
    2. None of these
    3. It produces axial flow
    4. It is suitable for mixing low-viscosity liquids (correct answer)

    Correct answer: It is suitable for mixing low-viscosity liquids. A paddle agitator turns slowly and suits low-viscosity liquids, giving gentle bulk circulation without violent shear. High speeds would just splash and aerate; axial flow is the propeller's job. Think of it as a slow stirrer for blending miscible liquids.
  19. Mesh number indicates the number of openings per what?
    1. Square inch
    2. Linear inch (correct answer)
    3. Square foot
    4. Linear foot

    Correct answer: Linear inch. Mesh number counts the openings per linear inch of screen — a 100-mesh screen has 100 openings along each inch. It is linear, not square: a 100-mesh screen has 10,000 openings per square inch. Finer separation needs a higher mesh number.
  20. Cyclones are used primarily for separating what?
    1. Solids alone
    2. Solids from fluids (correct answer)
    3. Liquids alone
    4. Solids from solids

    Correct answer: Solids from fluids. Cyclones use spinning flow to fling solids out of a fluid stream — gas or liquid — against the wall, where they slide down to the outlet. Centrifugal force does the separating; no filter medium is involved. Sawdust collection and spray-dryer powder recovery are everyday uses.