Login Register

Access the GIFSQ Portal

Select your user type to log in or register a new account.

Student Portal

Access your food safety courses and exams.

Instructor Portal

Manage courses, view student submissions, and grade quizzes.

Company Portal

Manage corporate setup, view employee logs, and access QA services.

Other Food Engineering Topics – Part 2

GIFSQ ID: ART-0823

What this quiz covers

This quiz works through the separation steps of a food plant: filtering, pressing, spinning and drying. A commonly used filter aid is kieselguhr, and in expression, separation takes place on the basis of compressive force. A disc bowl separator is used for separation of cream from milk, refining of animal fats, and clarification of fruit juice, all three. The basic filter medium in an edge filter is the filter pile, and solid fuels are the ones characterised by high sulphur and ash contents, while electricity is not a primary source of heat energy.

The middle of the quiz is instruments and panels. Carbon dioxide is 1.53 times heavier than air. The graphic panel gives a symbolic representation of the entire process of a system. The measuring circuit used with a thermocouple is the potentiometer circuit, and the first requirement for pneumatic transmission of instrument signals is a constant air supply. An electrostatic separator makes use of differences in electrical properties, and hydrophilic solids are the ones unfloatable in flotation, since they prefer water to air.

Separation and mixing

The separation of solids from a suspension in liquid by gravity is sedimentation. An axial-flow, high-speed impeller is essentially a propeller, and a double arm kneader uses sigma, double and dispersion blades. The ratio of inertia force to viscous force is the Reynolds number. In distillation, mass transfer takes place in both directions, relative volatility is the measure of separation by distillation, and separation by distillation is impossible when relative volatility equals one. Heat can be transmitted across an absolute vacuum by radiation alone.

How to use this quiz

Sort each separation by its force before you start: gravity for sedimentation, compressive force for expression, centrifugal force for the disc bowl separator. Then keep the distillation pair together: relative volatility of one means no separation is possible. After you finish, read the explanations below the player: each one states the correct answer and the reason in plain words, so a wrong answer becomes a fact you can carry into the next lab session or exam.

Other Food Engineering Topics – Part 2
Uncategorized

Choose how you want to play

Sound effects
🔈 Volume
Show explanations
🔊 Auto-read every question
Reading speed

Answer explanations

Worked through the quiz? Here is why each correct answer is correct: the concept behind it, in plain terms.

  1. Which is a commonly used filter aid?
    1. Cellulose acetate
    2. Solid cake
    3. Kieselguhr (correct answer)
    4. Glass fibres

    Correct answer: Kieselguhr. Kieselguhr — diatomaceous earth, the fossilized skeletons of microscopic algae — is the classic filter aid. Its porous, rigid particles build an open, permeable cake that keeps fine solids from blinding the filter cloth. It is dusted on as a precoat or mixed into the slurry.
  2. In expression, separation takes place on the basis of which force?
    1. Hydraulic force
    2. Shear force
    3. Centrifugal force
    4. Compressive force (correct answer)

    Correct answer: Compressive force. Expression — squeezing liquid out of a solid, as in pressing oilseeds or fruit — works by compressive force. The press literally squeezes the solid matrix until the liquid is expelled. Shear and centrifugal forces drive other separations, but expression is compression.
  3. A disc bowl separator is used for which of these?
    1. Separation of cream from milk
    2. Refining of animal fats
    3. Clarification of fruit juice
    4. All of these (correct answer)

    Correct answer: All of these. The disc bowl (disc-stack) centrifuge does all of these: it separates cream from milk, refines animal fats, and clarifies fruit juice. Its stack of conical discs gives solids and liquid phases a huge settling area under high centrifugal force. That versatility is why dairies and juice plants both rely on it.
  4. What is the basic filter medium in an edge filter?
    1. Filter leaf
    2. Filter pile (correct answer)
    3. Cylindrical tube
    4. Filter plate

    Correct answer: Filter pile. An edge filter's working medium is the filter pile — a stack of closely spaced rings or discs on a central grooved rod. Liquid strains through the thin gaps at the discs' edges, leaving solids behind on the edges. Backflushing or spinning the pile cleans it without dismantling.
  5. Which fuels are characterised by high sulphur and ash contents?
    1. All of these
    2. Gaseous
    3. Liquid
    4. Solid (correct answer)

    Correct answer: Solid. Solid fuels — coal, lignite, biomass — carry the highest sulphur and ash contents. Sulphur becomes sulfur dioxide in the flue gas, and the mineral matter remains as ash that must be handled. Liquid and gaseous fuels burn far cleaner on both counts.
  6. Which of these is not a primary source of heat energy?
    1. Solid fuel
    2. Liquid fuel
    3. Gases
    4. Electricity (correct answer)

    Correct answer: Electricity. Electricity is not a primary energy source; it is a secondary carrier made by converting primary sources like coal, gas, hydro, or uranium. Solid, liquid, and gaseous fuels all occur as primary energy stores. That is why electricity's cost and carbon footprint depend on how it was generated.
  7. Carbon dioxide is how many times heavier than air?
    1. 10
    2. 7.3
    3. 3.53
    4. 1.53 (correct answer)

    Correct answer: 1.53. Carbon dioxide's molecular weight is 44 against air's average of about 29, so CO₂ is roughly 1.5 times heavier than air (44 ÷ 29 ≈ 1.52, commonly rounded to 1.53). That is why CO₂ pools in low spots and pits, creating an asphyxiation hazard in breweries and silos. Ventilation must sweep low areas, not just the breathing zone.
  8. Which panel gives a symbolic representation of the entire process of a system?
    1. Non-graphic
    2. Serigraphic
    3. None of these
    4. Graphic (correct answer)

    Correct answer: Graphic. A graphic panel shows the whole process as symbols and mimic diagrams — tanks, valves, and flows drawn out so operators see the system at a glance. A non-graphic panel carries no such symbols, just instruments and switches. The graphic mimic is the operator's map of the plant.
  9. The measuring circuit used with a thermocouple is called what?
    1. Wheatstone bridge
    2. Closed circuit
    3. Potentiometer circuit (correct answer)
    4. Feedback loop

    Correct answer: Potentiometer circuit. A thermocouple's tiny millivolt output is measured with a potentiometer circuit, which balances the unknown voltage against a known one without drawing current. Drawing current would cool the junction and corrupt the reading. Modern transmitters do this electronically, but the principle is potentiometric.
  10. What is the first requirement for pneumatic transmission of instrument signals?
    1. Constant water supply
    2. Constant air supply (correct answer)
    3. Constant force
    4. Constant displacement

    Correct answer: Constant air supply. Pneumatic instruments run on compressed air, so the first requirement is a constant, clean, dry air supply. Fluctuating pressure would shift every 3–15 psi control signal in the plant. Instrument air dryers and filters exist to protect that steadiness.
  11. An electrostatic separator makes use of differences in which property?
    1. Magnetic properties
    2. Densities
    3. Electrical properties (correct answer)
    4. Moisture content

    Correct answer: Electrical properties. An electrostatic separator sorts particles by their electrical properties — how readily they take or lose a charge. Conductors throw off the charged rotor while non-conductors pin to it. Density and magnetism drive other separators, not this one.
  12. Which type of solids are unfloatable in flotation?
    1. None of these
    2. Both of these
    3. Hydrophobic
    4. Hydrophilic (correct answer)

    Correct answer: Hydrophilic. Flotation floats the hydrophobic (water-repelling) particles on bubbles and leaves the hydrophilic (water-loving) ones behind. "Unfloatable" therefore means hydrophilic: those solids prefer staying in the water to attaching to air. Reagents can flip a surface from one to the other.
  13. What is the separation of solids from a suspension in liquid by gravity called?
    1. Centrifugation
    2. Sedimentation (correct answer)
    3. Flocculation
    4. None of these

    Correct answer: Sedimentation. Letting solids settle out of a liquid under gravity alone is sedimentation. Centrifugation does the same job faster with artificial gravity; flocculation is the chemical clumping that often precedes settling. A quiet tank and time are all sedimentation needs.
  14. An axial-flow, high-speed impeller is essentially what?
    1. Baffle
    2. Paddle
    3. Turbine
    4. Propeller (correct answer)

    Correct answer: Propeller. An axial-flow, high-speed impeller is essentially a propeller: it drives liquid straight along the shaft axis, top to bottom. Propellers give strong circulation at low shear, which suits blending and solids suspension. Turbines and paddles push liquid radially instead.
  15. Which blades are used in a double arm kneader?
    1. Sigma
    2. Double
    3. Dispersion
    4. All of these (correct answer)

    Correct answer: All of these. Double-arm (sigma) kneaders accept sigma blades, double-naben blades, and dispersion blades — the arm geometry is standardized, and the blade profile is swapped to suit the dough, paste, or adhesive. Heavy, stiff masses need the kneading action only twin counter-rotating arms provide. That interchangeability is why the blade list covers all three.
  16. The ratio of inertia force to viscous force is called what?
    1. Nusselt number
    2. Prandtl number
    3. Reynolds number (correct answer)
    4. Newton number

    Correct answer: Reynolds number. The Reynolds number is the ratio of inertia force to viscous force in a flowing fluid. High values mean inertia dominates and the flow turns turbulent; low values mean viscosity keeps it smooth and laminar. It is the single most used dimensionless group in fluid mechanics.
  17. In distillation, transfer of which quantity takes place in both directions?
    1. Heat transfer
    2. Evaporation
    3. Mass transfer (correct answer)
    4. None of these

    Correct answer: Mass transfer. Distillation moves mass in both directions at once: the more volatile component vaporizes upward while the less volatile condenses downward, and they exchange across each tray. Heat flows too, but the defining two-way traffic is mass transfer. That countercurrent exchange is what multiplies the separation.
  18. Relative volatility is the measure of separation by which operation?
    1. Gel filtration
    2. Osmosis
    3. Distillation (correct answer)
    4. None of these

    Correct answer: Distillation. Relative volatility — the ratio of the components' vapor-liquid equilibrium constants — measures how separable a mixture is by distillation. The further it is from 1, the easier the split. Every distillation column design starts by checking this number.
  19. Separation by distillation is impossible when relative volatility equals what?
    1. Zero
    2. Two
    3. One (correct answer)
    4. Four

    Correct answer: One. When relative volatility equals exactly 1, the vapor has the same composition as the liquid, so no separation happens on any tray. The mixture may form an azeotrope, which boils unchanged. Ordinary distillation is impossible then; extractive distillation or another method must break the deadlock.
  20. Heat can be transmitted across an absolute vacuum by which mode?
    1. Conduction
    2. Radiation (correct answer)
    3. Convection
    4. None of these

    Correct answer: Radiation. Only radiation crosses a perfect vacuum, because conduction needs a material and convection needs a moving fluid. The sun warms the earth across 150 million kilometers of near-vacuum by radiation alone. Thermos flasks use a vacuum jacket for exactly this reason — it kills conduction and convection, leaving only the slower radiative leak.