Login Register

Access the GIFSQ Portal

Select your user type to log in or register a new account.

Student Portal

Access your food safety courses and exams.

Instructor Portal

Manage courses, view student submissions, and grade quizzes.

Company Portal

Manage corporate setup, view employee logs, and access QA services.

Other Food Engineering Topics & Size Reduction Quiz

GIFSQ ID: ART-0991

What this quiz covers

This quiz has two halves: food packaging materials first, size reduction second. The packaging half is a run of material facts. Polypropylene melts at about 176 degrees in the source table. PET combines a good moisture, oxygen and aroma barrier with a glossy clear finish and excellent heat resistance, all three at once. Polystyrene cannot claim that barrier, which is why it is a poor choice for oxygen-sensitive food. Cans for aseptic packaging are made of tin plate and ECCS together, and glass bottles are sterilized with saturated steam and dry heat. Twist-wrap suits toffees, biscuits are wrapped in BOPP, GTR is short for Gas Transmission Rate, and plastic film thickness is checked with a micrometer.

The size reduction half is a catalogue of machines and laws. A knife cutter shreds meat in the food industry. Cutting, milling and pulping all reduce particle size, as do slicing, dicing and mincing, and shredding and flaking too. Emulsification, homogenization and chopping all reduce particle or droplet size. The three laws are Kick’s law, Rittinger’s law and Bond’s law, and Bond’s law is used to calculate the energy needed. Food materials are ground in pin-and-disc, wing-beater, disc-beater, vertical toothed-disc, hammer and ball mills, and wet milling is the operation that uses a slurry.

Plastics first, mills second

Two packaging answers deserve a careful read. The source gives 176 degrees as the melting point of polypropylene, while most references put it around 160 to 170 degrees, so treat 176 as the source’s table value, kept as given. And the knife cutter is the key for shredding meat: it is the bowl cutter family of machines, with knives rotating in a bowl, rather than a mill. Comminution is simply another name for size reduction, which is why that answer closes the quiz.

How to use this quiz

Before you start, learn the PET trio and the three size-reduction laws: Kick, Rittinger and Bond. Then work through the 20 questions and read the explanations below the player: each one states the correct answer and the reason in plain words, so a wrong answer becomes a fact you can carry into the next lab session or exam.

Other Food Engineering Topics & Size Reduction Quiz
Uncategorized

Choose how you want to play

Sound effects
🔈 Volume
Show explanations
🔊 Auto-read every question
Reading speed

Answer explanations

Worked through the quiz? Here is why each correct answer is correct: the concept behind it, in plain terms.

  1. At about what temperature does polypropylene melt?
    1. 98
    2. 137
    3. 176 (correct answer)
    4. 240

    Correct answer: 176. Polypropylene is a semi-crystalline polymer whose crystals melt at about 160–170°C — 176 in round figures. That places it well above polyethylene (around 130°C) and explains why PP tolerates hot-fill and microwave reheating.
  2. Which are properties of PET?
    1. Good moisture, O₂, and aroma barrier
    2. Glossy and clear
    3. Excellent heat resistance
    4. Good moisture, O₂, and aroma barrier, glossy and clear, and excellent heat resistance (correct answer)

    Correct answer: Good moisture, O₂, and aroma barrier, glossy and clear, and excellent heat resistance. PET combines a good barrier to moisture, oxygen, and aromas with glass-like clarity and gloss, and it withstands hot-fill temperatures — the package of properties that made it the standard beverage-bottle plastic. All three statements are true of PET, so the combined option is correct.
  3. Polystyrene cannot claim which property?
    1. Excellent moisture, O₂, and aroma barrier (correct answer)
    2. Strong and stiff
    3. Glossy and clear
    4. None of these

    Correct answer: Excellent moisture, O₂, and aroma barrier. Polystyrene is stiff, strong, and glossy — the reason it is used for yogurt cups and clear clamshells — but it is a poor barrier to moisture, oxygen, and aromas. Barrier performance is the one property on the list it cannot claim.
  4. What are cans used for aseptic packaging made of?
    1. Tin plate
    2. ECCS
    3. Tin plate and ECCS (correct answer)
    4. Neither

    Correct answer: Tin plate and ECCS. Metal cans for aseptic filling are drawn from tinplate (electrolytic tin-coated steel) or ECCS — electrolytic chromium-coated steel, the tin-free can stock. Both are standard can materials, so the combined option is correct.
  5. What is used to sterilize glass bottles?
    1. Saturated steam
    2. Dry heat
    3. Saturated steam and dry heat (correct answer)
    4. Neither

    Correct answer: Saturated steam and dry heat. Glass tolerates both sterilization methods: saturated steam sterilizes bottles in a retort, and dry heat in a hot-air tunnel sterilizes them ahead of aseptic filling. Because both are routinely used on glass bottles, the combined option is correct.
  6. What does twist-wrap suit?
    1. Toffees (correct answer)
    2. Butter
    3. Condensed milk
    4. Toffees, butter, and condensed milk

    Correct answer: Toffees. Twist wrap is the classic confectionery wrap — the film is twisted at both ends to seal individual toffees and boiled sweets. Butter needs a greaseproof wrap and condensed milk needs a hermetic can, so neither suits twist wrapping.
  7. What are biscuits wrapped in?
    1. BOPP (correct answer)
    2. PET
    3. Glass
    4. BOPP, PET, and glass

    Correct answer: BOPP. Biscuits are wrapped in biaxially oriented polypropylene (BOPP), whose moisture barrier keeps them crisp on the shelf. PET and glass are not biscuit-wrap materials.
  8. GTR is short for what?
    1. Gas Transmission Rate (correct answer)
    2. Glass Transfer Rate
    3. Gas Transfer Rate
    4. None of these

    Correct answer: Gas Transmission Rate. GTR stands for gas transmission rate — the volume of gas passing through a unit area of film per unit time under defined conditions. It is the standard measure of a packaging film's gas barrier.
  9. What is plastic film thickness checked with?
    1. Dial gauge
    2. Vernier caliper
    3. Micrometer (correct answer)
    4. Dial gauge, vernier caliper, and micrometer

    Correct answer: Micrometer. Film thickness is measured with a micrometer (dead-weight thickness gauge), which reads in microns with the precision thin flexible films require. A dial gauge or vernier caliper is far too coarse for film work.
  10. Which machine shreds meat in the food industry?
    1. Ball mill
    2. Hammer mill
    3. All of these
    4. Knife cutter (correct answer)

    Correct answer: Knife cutter. The knife cutter — the high-speed bowl (silent) cutter — is the meat industry's comminution machine, chopping meat for sausages and patties. Ball mills and hammer mills grind dry materials, not meat.
  11. Which of these techniques reduce particle size?
    1. Cutting
    2. Milling
    3. Pulping
    4. All of these (correct answer)

    Correct answer: All of these. Cutting, milling, and pulping all break material into smaller pieces — each is a size-reduction technique. Since all three qualify, the combined option is correct.
  12. Which operations achieve size reduction?
    1. Slicing
    2. Dicing
    3. Mincing
    4. All of these (correct answer)

    Correct answer: All of these. Slicing, dicing, and mincing are all mechanical operations that reduce the size of food pieces. Since all three achieve size reduction, the combined option is correct.
  13. Which of these are size-reduction operations?
    1. Shredding
    2. Flaking
    3. Both of these (correct answer)
    4. Neither

    Correct answer: Both of these. Shredding and flaking both break food into smaller fragments — both are size-reduction operations. The "both of these" option is correct.
  14. Which processes reduce particle or droplet size?
    1. Emulsification
    2. Homogenization
    3. Chopping
    4. All of these (correct answer)

    Correct answer: All of these. Emulsification and homogenization break droplets into finer ones, and chopping breaks particles into smaller pieces — all three reduce particle or droplet size. Since all three qualify, the combined option is correct.
  15. Which laws describe the size reduction of food materials?
    1. Kick’s law
    2. Rittinger’s law
    3. Bond’s law
    4. All of these (correct answer)

    Correct answer: All of these. Kick's law, Rittinger's law, and Bond's law are the three classical energy laws of comminution, each relating the energy of size reduction to a different size function. All three describe size reduction, so the combined option is correct.
  16. In size reduction, what can Bond’s law be used to calculate?
    1. Surface area
    2. Volume
    3. Energy (correct answer)
    4. None of these

    Correct answer: Energy. Bond's law relates the energy required for size reduction to the feed and product sizes through the material's work index — it is an energy calculation. It does not directly compute surface area or volume.
  17. In which mills are food materials ground?
    1. Pin-and-disc mill
    2. Wing-beater mill
    3. Disc-beater mill
    4. All of these (correct answer)

    Correct answer: All of these. Pin-and-disc mills, wing-beater mills, and disc-beater mills are all impact/attrition mills used for grinding food materials. Since all three are food-grinding mills, the combined option is correct.
  18. Which mills grind food materials?
    1. Vertical toothed-disc mill
    2. Hammer mill
    3. Ball mill
    4. All of these (correct answer)

    Correct answer: All of these. Vertical toothed-disc mills, hammer mills, and ball mills are all used to grind food materials — by shear, impact, and tumbling action respectively. Since all three qualify, the combined option is correct.
  19. Which size-reduction operation uses a slurry?
    1. Choke feeding
    2. Closed-circuit grinding
    3. Wet milling (correct answer)
    4. All of these

    Correct answer: Wet milling. Wet milling grinds material suspended in liquid — a slurry — which is what distinguishes it from dry grinding. Choke feeding and closed-circuit grinding describe feed and circuit arrangements, not slurry operation.
  20. What is another name for comminution?
    1. Size reduction (correct answer)
    2. Mixing
    3. Irradiation
    4. None of these

    Correct answer: Size reduction. Comminution is the technical term for size reduction — the mechanical breaking of solids into smaller pieces. It has nothing to do with mixing or irradiation.