Other Food Additives Topics β Part 1
GIFSQ ID: ART-0888
Test your knowledge with this free 20-question Food Microbiology quiz (Part 4). Choose the correct answer for eachβ¦
What this quiz covers
This quiz is a numbers quiz on food additives: what counts as one, what the acids do, and what the HLB scale says about surfactants. Refined wheat flour is not classed as a food additive, while salt and sugar are, and one term covers preservatives, antioxidants, sequestrants and flavour enhancers: food additives. The acid section works through two acids in detail. Succinic acid has a pK1 of about 4.16 and a pK2 of about 5.61, while tartaric acid has a pK1 of about 2.98 and a pK2 of about 4.34. Tartaric acid, CβHβOβ, has a molecular mass of 150, melts at about 170 Β°C, and carries an ADI of 30 mg/kg body weight.
The middle of the quiz covers what additives do in practice. Bakers use both ABC and SBC as leavening agents, ammonium bicarbonate and sodium bicarbonate, and tartaric acid can play all of the listed roles: acidulant, leavening acid and sequestrant among them. To lock up trace metals, both groups of acids can serve as chelating agents: oxalic, succinic and lactic acids on one side, citric, malic and polyphosphoric acids on the other. Sodium, potassium and calcium orthophosphate salts all serve as chelating agents in foods.
The HLB scale
The quiz closes on surfactants, the molecules that sit at oil-water interfaces: proteins, hydrocolloids and phospholipids all qualify. The HLB numbers to learn are oleic acid about 1.0, sorbitol monolaurate about 8.6, Tween 60 about 14.9, Tween 80 about 15, and sodium oleate about 18. Surfactants with an HLB of 3-6 serve as water-in-oil emulsifiers.
How to use this quiz
Before you start, learn the HLB ladder in order: low numbers near 1 are oil-loving, high numbers near 18 are water-loving, and 3-6 marks the water-in-oil emulsifier band. Then learn the tartaric acid set: mass 150, melt 170 Β°C, pK1 2.98, pK2 4.34, ADI 30. After you finish, read the explanations below the player: each one states the correct answer and the reason in plain words, so a wrong answer becomes a fact you can carry into the next lab session or exam.
Choose how you want to play
Answer explanations
Worked through the quiz? Here is why each correct answer is correct: the concept behind it, in plain terms.
- Of salt, sugar and refined wheat flour, which one is NOT classed as a food additive?
Correct answer: Refined wheat flour: Refined wheat flour is a food ingredient, not an additive, while salt and sugar are classed as additives when they are used for preservation or other technological purposes. - What single term covers preservatives, antioxidants, sequestrants and flavour enhancers?
Correct answer: Food additives: Preservatives, antioxidants, sequestrants and flavour enhancers are all classes of food additives, substances added for a technological purpose. - What is the pK1 value of succinic acid, roughly?
Correct answer: 4.16: Succinic acid loses its first proton at a pK1 of about 4.16, the first of its two dissociation steps. - What is the pK2 value of succinic acid, roughly?
Correct answer: 5.61: Succinic acid loses its second proton at a pK2 of about 5.61, the second dissociation step of this dicarboxylic acid. - Which of these leavening agents do bakers use?
Correct answer: Both ABC and SBC: Bakers use both ABC, ammonium bicarbonate, and SBC, sodium bicarbonate, as leavening agents that release gas and lift the dough. - Which roles can tartaric acid play in foods?
Correct answer: All of these: Tartaric acid can play all of the listed roles, working as an acidulant, a leavening acid and a sequestrant, which is why it appears in baking powder and in wines. - Tartaric acid (CβHβOβ) has a molecular mass of?
Correct answer: 150: Tartaric acid, CβHβOβ, has a molecular mass of 150: four carbons, six hydrogens and six oxygens add up to 150. - At about what temperature does tartaric acid melt?
Correct answer: 170 Β°C: Tartaric acid melts at about 170 Β°C, a useful identity check for the pure crystalline acid. - What is the pK1 value of tartaric acid, roughly?
Correct answer: 2.98: Tartaric acid loses its first proton at a pK1 of about 2.98, so it is a fairly strong food acid. - Tartaric acid’s second dissociation constant, pK2, is about?
Correct answer: 4.34: Tartaric acid loses its second proton at a pK2 of about 4.34, the second step of its dissociation. - What is the ADI of tartaric acid for humans?
Correct answer: 30 mg/kg body weight: The acceptable daily intake of tartaric acid is 30 mg/kg body weight, the JECFA figure for lifetime daily intake without appreciable risk. - A food scientist needs to lock up trace metals. Which acids could serve as chelating agents?
Correct answer: Both groups: Both groups can chelate: oxalic, succinic and lactic acids bind metals through their carboxyl groups, while citric, malic and polyphosphoric acids are the classic food sequestrants. - Which orthophosphate salts serve as chelating agents in foods?
Correct answer: All of these: Sodium, potassium and calcium orthophosphate salts all serve as chelating agents in foods, binding calcium, magnesium and iron that would otherwise catalyse oxidation or haze. - Molecules that sit at oil-water interfaces are surfactants. Which food components qualify?
Correct answer: All three: Proteins such as casein and whey, hydrocolloids such as gum arabic, and phospholipids such as lecithin all adsorb at oil-water interfaces and lower interfacial tension, which is the definition of a surfactant. - About what is the HLB value of oleic acid?
Correct answer: 1.0: Oleic acid has an HLB of about 1.0, at the oil-loving end of the scale, since it is almost entirely a fatty acid chain with little water-loving character. - About what is the HLB value of sorbitol monolaurate?
Correct answer: 8.6: Sorbitol monolaurate has an HLB of about 8.6, in the middle of the scale, where surfactants act as wetting agents. - Tween 60 is polyoxyethylene sorbitol monostearate. What is its HLB value, about?
Correct answer: 14.9: Tween 60, polyoxyethylene sorbitol monostearate, has an HLB of about 14.9, well up the water-loving end of the scale, so it forms oil-in-water emulsions. - Tween 80 is polyoxyethylene sorbitol monooleate. What is its HLB value, about?
Correct answer: 15: Tween 80, polyoxyethylene sorbitol monooleate, has an HLB of about 15, close to Tween 60 and likewise an oil-in-water emulsifier. - About what is the HLB value of sodium oleate?
Correct answer: 18: Sodium oleate has an HLB of about 18, near the top of the scale, since its soap-like sodium salt head is strongly water-loving. - Surfactants with an HLB of 3β6 serve as what?
Correct answer: Water-in-oil emulsifiers: Surfactants with an HLB of 3-6 are oil-loving enough to stabilise water droplets in oil, so they serve as water-in-oil emulsifiers.