Other Emerging Food Processing Topics Quiz
GIFSQ ID: ART-0983
What this quiz covers
This quiz covers emerging food processing: the newer ways of killing microbes, heating food and measuring what is in it. It opens with the disinfection agents of minimal processing, ozone with the highest oxidation potential, chlorine dioxide as the least irritating, and ozone again as the one that breaks down rapidly in water. Then it turns to microwaves: lower frequencies penetrate deeper, so thicker materials need lower frequencies, and microwaves serve every thermal job from heating and drying to thawing, tempering and sterilization.
The middle questions are an infrared spectroscopy table: the hydroxyl group at 2.7 to 3.3 micrometres, the aliphatic C-H bond at 3.25 to 3.7, the ester carbonyl at 5.71 to 5.76, the amide carbonyl at 5.92, the N-H group at 2.83 to 3.33, and the C=C double bond at 5.95 to 6.05. Six questions share the same four options, so the band positions are the whole test. The last questions cover ultrasound and its cousins: cavitation, mano-thermo-sonication, radio-frequency equipment, ultrasonic homogenisers, pulsed light and the effects of ultrasound processing.
The infrared band table is worth memorising as one set
The six infrared questions look hard until you see them as one table. The O-H and N-H stretches sit together in the 2.7 to 3.3 micrometre region, the C-H stretch just beside them at 3.25 to 3.7, and the carbonyls and the C=C bond cluster near 5.7 to 6.05, with the ester carbonyl first, then the amide carbonyl, then the C=C double bond. Learn the three clusters in order and each question becomes a matter of placing the group in its cluster.
How to use this quiz
Work through the 20 questions and keep three piles: disinfection agents, microwaves, and the infrared bands, with ultrasound last. For the band questions, write the six groups and their bands on paper first, then answer from your table rather than from memory. The explanations below give the reason and the band position behind every correct answer.
Choose how you want to play
Answer explanations
Worked through the quiz? Here is why each correct answer is correct: the concept behind it, in plain terms.
- Which disinfection agent gives the highest population reduction in minimal processing?
Correct answer: Ozone. Ozone has the highest oxidation potential of the listed agents, about 2.07 V, which translates into the strongest and fastest microbial kill in minimal processing. - Which disinfection agent is the least irritating in minimal processing?
Correct answer: Chlorine dioxide. Chlorine dioxide is the least irritating of the group at typical use concentrations: unlike hypochlorites it does not generate irritating chloramines, and unlike ozone it is not a strong respiratory irritant. - Which disinfection agent breaks down rapidly in water?
Correct answer: Ozone. Ozone is unstable in water and decomposes back to oxygen within minutes, which is both its strength, no residues, and its weakness, no lasting residual effect. - To heat thicker materials, should microwave frequency be higher or lower?
Correct answer: Lower. Lower microwave frequencies penetrate deeper into food, which is what thick materials need for even heating; higher frequencies are absorbed near the surface. - What happens to penetration depth as microwave frequency falls?
Correct answer: Increases. Penetration depth is inversely related to frequency: as frequency falls, the waves travel farther into the material before their energy is absorbed. - Which of these are applications of microwaves in food processing?
Correct answer: All of these. Microwaves are used across the full range of thermal jobs: heating, cooking, drying, thawing, tempering, pasteurization, roasting, blanching and sterilization. - At what wavelength does the hydroxyl group absorb infrared?
Correct answer: 2.7–3.3 µm. The O-H stretching vibration absorbs in the near-infrared at about 2.7 to 3.3 micrometres, roughly 3000 to 3700 cm-1; the other bands belong to different groups. - At what wavelength does the aliphatic C–H bond absorb infrared?
Correct answer: 3.25–3.7 µm. Aliphatic C-H stretching falls at 3.25 to 3.7 micrometres, about 2700 to 3100 cm-1, the familiar hydrocarbon band. - At what wavelength does the ester carbonyl group absorb infrared?
Correct answer: 5.71–5.76 µm. Ester carbonyl stretching gives the sharp band at 5.71 to 5.76 micrometres, about 1740 cm-1, the classic marker for fats and oils. - At what wavelength does the amide carbonyl group absorb infrared?
Correct answer: 5.92 µm. The amide carbonyl of proteins absorbs at 5.92 micrometres, about 1690 cm-1, shifted to longer wavelength than the ester carbonyl because of conjugation with nitrogen. - At what wavelength does the N–H group absorb infrared?
Correct answer: 2.83–3.33 µm. N-H stretching in proteins absorbs at 2.83 to 3.33 micrometres, about 3000 to 3530 cm-1, overlapping the O-H region. - At what wavelength does the C=C double bond absorb infrared?
Correct answer: 5.95–6.05 µm. The C=C double-bond stretch absorbs at 5.95 to 6.05 micrometres, about 1650 to 1680 cm-1, just past the amide carbonyl band. - What do the rapid pressure and temperature changes from ultrasound cause?
Correct answer: All of these. Ultrasound’s rapid pressure-temperature swings act through cavitation: collapsing bubbles shear structures apart, disrupt cells and thin membranes. - What does mano-thermo-sonication combine?
Correct answer: All of these. Mano-thermo-sonication is the triple hurdle: pressure, heat and ultrasound applied together for a synergistic kill. - Which of these does radio-frequency electric-field equipment include?
Correct answer: All of these. A radio-frequency electric-field rig needs a function generator to make the signal, an amplifier to bring it to power, and a transformer or matching network to deliver it. - What frequency of sound waves do ultrasonic homogenisers use?
Correct answer: High. Ultrasonic means above the range of human hearing, so by definition these homogenizers work with high-frequency sound waves, not low ones. - What do ultrasonic homogenisers cause in low-viscosity liquids with high-frequency waves?
Correct answer: Tension. In low-viscosity liquids the sound wave’s rarefaction, tension, phase is what pulls the liquid apart and nucleates cavitation bubbles, the working mechanism of ultrasonic homogenization. - Which of these do ultrasonic homogenisers produce?
Correct answer: All of these. Ultrasonic homogenizers’ fine emulsions and dispersions turn up in salad cream, baby foods and essential-oil emulsions alike. - Which of these are true of pulsed light technology?
Correct answer: Both of these. Pulsed light is a rapid, low-energy surface treatment of medium cost, and it suits dry foods particularly well because there is no heating or moisture change. - Which of these are true of ultrasound processing?
Correct answer: Both of these. Ultrasound processing inactivates vegetative cells, spores and enzymes, especially at high power, and it also boosts heat transfer, shortens processing times and modifies enzyme activity.