Other Dairy By-products Topics & Dairy Technology Quiz
GIFSQ ID: ART-0981
What this quiz covers
This quiz covers dairy by-products and dairy technology in two halves. The first half is about what by-products become and how casein behaves. Whey turns into beverages, ricotta and primost; ghee residue turns into toffee and sweetmeat; casein comes as acid casein and rennet casein; and rennet casein once made plastic buttons and jewellery while acid casein went into paper coating, fibre and film. The defect questions follow the same pattern: browning, poor solubility and low adhesive strength each have their causes in heat, fat, sulphate, ash and moulding, and lactalbumin is the one named protein that dissolves in water.
The second half jumps across dairy technology and food processing. It asks which products bioprocesses can make, why spray drying suits milk, which fruits ethylene ripens, how much energy heating milk needs beside water, which organism sets the pasteurization standard, which gas triggers ripening, which clear drink carries 30 percent total soluble solids, who proposed the salt-balance theory, and the isoelectric point of milk protein. Ten questions, ten separate facts, and the explanations below tie each one to its reason.
Casein is two products, not one
The casein questions turn on one distinction: acid casein is made by bringing skim milk to pH 4.6, rennet casein by the enzymatic action of rennet, and the two behave differently ever after. Acid casein is the film-forming, adhesive one for paper, fibre and film; rennet casein is the tough, mouldable one that once became casein plastic. Remember which process makes which, and the use questions, the solubility question and the defect questions all follow from it.
How to use this quiz
Work through the 20 questions and sort the casein questions by process first: acid or rennet. For the second half, take each question on its own terms, since the facts do not share one thread, and lean on the numbers you already know, pH 4.6 for casein, ethylene as C2H4, and Coxiella burnetii as the pasteurization benchmark. The explanations below give the reason behind every correct answer.
Choose how you want to play
Answer explanations
Worked through the quiz? Here is why each correct answer is correct: the concept behind it, in plain terms.
- Which products can be prepared from whey?
Correct answer: All three: whey beverages, ricotta cheese and primost cheese. Whey’s lactose and soluble proteins make it a versatile raw material: it is fermented or blended into whey beverages, heated to precipitate albumin into ricotta, and evaporated into primost. - Which products can be prepared from ghee residue?
Correct answer: Both ghee toffee and sweetmeat. Ghee residue, the browned milk solids left after ghee clarification, is rich in protein and roasted flavour, and Indian dairy practice turns it into both ghee toffee and sweetmeats such as burfi. - Which of these are types of casein?
Correct answer: Both acid casein and rennet casein. Industrial casein is classified by how it is coagulated: acid casein by bringing skim milk to pH 4.6, rennet casein by the enzymatic action of rennet, so both are standard commercial types. - Which is a continuous process for making acid casein?
Correct answer: Sheffield process only. The Sheffield process is the continuous process for making acid casein named in the dairy technology texts, so Sheffield only is the answer. - What causes a browning defect in casein?
Correct answer: All three: overheating during drying, extra fat during drying and sulphate present during drying. Browning in casein is non-enzymatic, Maillard-type discoloration: overheating during drying drives it, extra fat supplies reactants, and residual sulphate from sulfuric-acid precipitation is implicated in darkening. - What causes poor solubility of casein?
Correct answer: All three: too hot cooking of the curd, overheating during drying and molding of curd during drying. Casein solubility suffers whenever the protein is damaged: cooking the curd too hot denatures it, overheating during drying bakes in insolubility, and molding during drying degrades the protein. - Which factors cause low adhesive strength in casein?
Correct answer: Both high ash content and molding of curd during drying. Casein adhesives depend on clean, low-mineral protein: high ash dilutes and interferes with the protein film, and mold growth during drying breaks the protein down. - Which goods is rennet casein used in making?
Correct answer: Both plastic buttons and plastic jewellery. Rennet casein’s tough, mouldable protein made it the historic feedstock for casein plastics, famously turned into both buttons and jewellery. - In which products is acid casein used?
Correct answer: All three: paper coating, fibre and film. Acid casein is a film-forming, adhesive protein used industrially in paper coatings, spun into fibers and cast into films, so all three are established applications. - Which of these is soluble in water?
Correct answer: Lactalbumin only. Lactalbumin is a soluble whey protein that dissolves readily in water, while rennet casein is an insoluble calcium paracaseinate complex that needs alkali treatment to become soluble caseinate. - Which of these β amino acids, nucleotides or ethanol β can be produced using bioprocesses?
Correct answer: All three products. Industrial biotechnology makes all three by fermentation or enzymatic routes: amino acids such as glutamic acid, nucleotides by fermentation, and ethanol by yeast fermentation. - Which of these acids β citric, acetic or glutamic β can be produced using bioprocesses?
Correct answer: All three acids. Citric acid by Aspergillus niger fermentation, acetic acid by Acetobacter fermentation, and glutamic acid by bacterial fermentation are all textbook bioprocess products. - Which one is an efficient method of drying milk?
Correct answer: Spray drying. Spray drying atomizes milk into a hot air stream, giving huge surface area and drying in seconds, which makes it the most efficient and quality-preserving route for milk. - What are fruits affected by ethylene gas called?
Correct answer: Climacteric. Ethylene triggers the ripening cascade only in climacteric fruits such as bananas, mangoes and tomatoes; non-climacteric fruits like citrus and grapes do not ripen in response to it. - How much energy does heating milk need compared with water?
Correct answer: Slightly less. Milk’s specific heat, about 3.9 kJ per kg per K, sits slightly below water’s 4.18, because its dissolved and suspended solids carry less heat per unit mass than pure water. - Which one is the indicator organism for pasteurized milk?
Correct answer: Coxiella burnetii. Pasteurization time-temperature standards were set to destroy Coxiella burnetii, the most heat-resistant pathogen likely present in milk and the cause of Q fever. - What gas triggers fruit ripening?
Correct answer: CβHβ. Ethylene, C2H4, is the plant hormone that triggers ripening; it is even applied commercially to degreen citrus and ripen bananas. - Which one is a clear drink with 30% TSS?
Correct answer: Cordial. Under fruit-product standards, a cordial is the clear, sparkling drink standardized at about 30 percent total soluble solids, while squash runs higher at around 40 to 45 percent. - Who proposed the salt-balance theory?
Correct answer: Somer and Hart. The salt-balance theory, that the ratio of calcium and magnesium to citrate and phosphate governs casein micelle stability and heat behaviour, is credited to Somer and Hart. - What is the isoelectric point of milk protein?
Correct answer: 4.6. Casein reaches minimum solubility at its isoelectric point, pH 4.6, where the micelles lose their charge and precipitate, which is why acid coagulation targets 4.6.