Login Register

Access the GIFSQ Portal

Select your user type to log in or register a new account.

Student Portal

Access your food safety courses and exams.

Instructor Portal

Manage courses, view student submissions, and grade quizzes.

Company Portal

Manage corporate setup, view employee logs, and access QA services.

Infrared Heating Quiz

GIFSQ ID: ART-0944

What this quiz covers

The first thirteen questions are about ohmic and radio-frequency heating, the electrical cousins of infrared. Ohmic heating drives electric current straight through the food, and the food’s own electrical resistance turns that current into heat, so electrodes are the working element and pressure plays no role. Radio-frequency dielectric heating warms foods volumetrically, which suits it to pre-heating and pre-cooking, and to sterilization, tempering frozen blocks and post-baking finishing. Ohmic systems are built as batch vessels, transverse units with the field across the flow, and collinear units with the field along the flow. In particulate ohmic heating, uniform heating depends on slip velocity, volume fraction and particle diameter, all three.

The sorting skill in this half is conductors against insulators, and the rule is simple: water with mobile ions conducts, fat and dry matter do not. Condiments, yoghurt, egg and wine are good conductors, salty, moist and ion-rich. Powders, marmalade, hydrocolloids, gelatine, margarine at about 80 percent fat, frozen food with its ions locked into ice, foam, syrup, liquor and plain fat are poor conductors. Fat is an electrical insulator: no water, no mobile ions.

Infrared: the last seven questions

Infrared heating itself arrives in the last seven questions. It delivers intense surface heat, used for drying, baking and roasting, and for blanching and surface pasteurization. The bands run near-infrared 0.75 to 1.4 micrometres, mid-infrared 1.4 to 3.0, and far-infrared 3.0 to 1000. Four laws govern it: Planck’s law, Wien’s displacement law, the Stefan-Boltzmann law and the modified Beer’s law. When infrared strikes food, part is absorbed and becomes heat, part reflects off the surface, and part scatters within the surface structure.

How to use this quiz

Before you start, learn the sorting rule: if it is wet and salty it conducts, if it is fatty, dry or frozen it does not. Then learn the infrared bands in order: 0.75 to 1.4, 1.4 to 3.0, 3.0 to 1000 micrometres. After you finish, read the explanations below the player: each one states the correct answer and the reason in plain words, so a wrong answer becomes a fact you can carry into the next lab session or exam.

Infrared Heating Quiz
Uncategorized

Choose how you want to play

Sound effects
🔈 Volume
Show explanations
🔊 Auto-read every question
Reading speed

Answer explanations

Worked through the quiz? Here is why each correct answer is correct: the concept behind it, in plain terms.

  1. What does ohmic heating work with?
    Correct answer: Electrodes: Ohmic heating drives electric current straight through the food, and the food’s own electrical resistance turns that current into heat. Electrodes are what deliver the current, pressure plays no role.
  2. Which of these can RFD handle?
    Correct answer: Both of these: Radio-frequency dielectric (RFD) heating warms foods volumetrically, which suits it to pre-heating and pre-cooking steps before the main process. Both are documented RF applications.
  3. Which of these operations can RFD perform?
    Correct answer: All of these: RF heating is applied to sterilization, to tempering frozen blocks, and to post-baking finishing such as drying crackers after the oven. All three appear in RF application lists.
  4. Which foods are good electrical conductors?
    Correct answer: All of these: Condiments are salty, yoghurt is moist and ion-rich, and egg carries water plus dissolved salts, mobile ions make good conductors. All three conduct electricity well.
  5. Which of these shows low electrical conductivity?
    Correct answer: Powders: Powders are dry, with little water and few mobile ions to carry charge. Milk desserts and fruit juices are moist and conduct far better. Powders are the poor conductors here.
  6. Which foods conduct electricity poorly?
    Correct answer: All of these: Marmalade locks its water up in sugar, hydrocolloids are dry gums, and gelatine is a dry protein, all low-moisture, low-ion materials. Ohmic-heating texts class all three as poor conductors.
  7. Which of these has low electrical conductivity?
    Correct answer: Margarine: Margarine is about 80 percent fat, and fat is an electrical insulator. Wine carries dissolved ions and egg carries moisture and salts, so both conduct well. Margarine is the poor conductor.
  8. Which of these conducts electricity well?
    Correct answer: Wine: Wine is water plus dissolved acids and minerals, plenty of mobile ions, so it conducts well. Gelatine and hydrocolloids in dry form offer no such ionic path.
  9. Which of these shows poor electrical conductivity?
    Correct answer: Frozen food: Freezing locks water into ice crystals and immobilizes the ions, so frozen food conducts far worse than its thawed self. Yoghurt and fruit juices, liquid and ion-rich, conduct well.
  10. Which foods are poor electrical conductors?
    Correct answer: All of these: Foam is mostly air, syrup binds its water in sugar, and liquor is alcohol with few ions, none offers a good conductive path. All three are poor electrical conductors.
  11. Which of these is a poor electrical conductor?
    Correct answer: Fat: Fat is an electrical insulator, no water, no mobile ions. Condiments, egg, and wine all conduct through their water and dissolved salts. Fat is the poor conductor.
  12. Ohmic heating is set up in which configurations?
    Correct answer: All of these: Ohmic systems are built as batch vessels, as transverse units (field across the flow), and as collinear units (field along the flow). Each geometry suits different products. All three configurations exist.
  13. What influences ohmic heating?
    Correct answer: All of these: In particulate ohmic heating, uniform heating depends on how particles move relative to the fluid (slip velocity), how much of the volume they occupy (volume fraction), and how big they are (particle diameter). All three influence the process.
  14. What is infrared heating used for?
    Correct answer: All of these: Infrared delivers intense surface heat, which suits removing moisture (drying), browning crusts (baking), and searing surfaces (roasting). All three are standard IR uses.
  15. Which of these treatments use infrared heating?
    Correct answer: Both of these: Infrared is used for blanching, a quick surface heat to knock out enzymes, and for surface pasteurization of foods. Both treatments rely on IR’s rapid surface heating.
  16. In which µm range does NIR radiation fall?
    Correct answer: 0.75–1.4 µm: The near-infrared band runs 0.75 to 1.4 µm, just beyond visible red light. That is the standard subdivision used in food infrared texts.
  17. In which µm range does MIR radiation fall?
    Correct answer: 1.4–3.0 µm: Mid-infrared spans 1.4 to 3.0 µm, the band where many molecular vibrations absorb strongly. Food IR references place MIR in this window.
  18. In which µm range does far-infrared radiation fall?
    Correct answer: 3.0–1000 µm: Far-infrared covers 3.0 to 1000 µm, the long-wave region where most food heating and drying happens. Standard texts assign FIR this broad band.
  19. Which laws relate to infrared radiation?
    Correct answer: Both of these: Infrared work leans on four laws: Planck’s law (emission spectrum), Wien’s displacement law (peak wavelength), the Stefan-Boltzmann law (total radiated power), and the modified Beer’s law (absorption in the food). Both pairs belong, so both of these is right.
  20. What happens when infrared radiation strikes food?
    Correct answer: All of these: When IR strikes food, part is absorbed (becoming heat), part reflects off the surface, and part scatters within the surface structure. All three fates share the incoming energy.