Login Register

Access the GIFSQ Portal

Select your user type to log in or register a new account.

Student Portal

Access your food safety courses and exams.

Instructor Portal

Manage courses, view student submissions, and grade quizzes.

Company Portal

Manage corporate setup, view employee logs, and access QA services.

Ice Cream Properties Quiz

GIFSQ ID: ART-0943

What this quiz covers

This quiz is about the physical behaviour of cream and ice cream mix, and most of it is one idea: viscosity, what moves it up or down. Acidic cream must be neutralized before churning, and the cream is held at 29 to 32 degrees C while the neutralizer goes in, warm and fluid so it mixes evenly instead of churning into butter. Raising the temperature of cream lowers its viscosity, cold cream pours like syrup and warm cream pours like milk. Whipping cream needs 30 to 35 percent fat to hold stiff peaks: enough fat to trap air, but not so much that the cream churns straight to butter. The specific gravity of cream falls as fat rises, because fat is lighter than water, near 0.93, so a lactometer floats higher in skim milk.

Ice cream mix is non-Newtonian, its measured viscosity depends on the shear rate applied, which is why basic and apparent viscosity are the terms used. Nearly every factor here pushes viscosity up: more stabilizer, fat, sugar, milk salts, total soluble solids, and acidity, as proteins near their isoelectric point and aggregate. Only temperature pushes it down. The mix specific gravity falls between 1.05 and 1.12, measured at 16 degrees C, the 60 F reference point. Its freezing point is about minus 2.5 degrees C, and sugar lowers it further, since freezing point depression counts dissolved molecules, so glucose, lighter than sucrose, depresses it even more per gram. The normal surface tension of the mix is 48 to 53 dynes per cm, well below water’s 72.

Cream’s minimum fat

The approximate minimum fat content of cream is about 20 percent, the light-cream end of the scale, with richer grades climbing from there.

How to use this quiz

Before you start, learn the viscosity directions: everything raises viscosity except temperature. Then fix the four numbers: 29 to 32, 30 to 35, 1.05 to 1.12, minus 2.5. After you finish, read the explanations below the player: each one states the correct answer and the reason in plain words, so a wrong answer becomes a fact you can carry into the next lab session or exam.

Ice Cream Properties Quiz
Uncategorized

Choose how you want to play

Sound effects
🔈 Volume
Show explanations
🔊 Auto-read every question
Reading speed

Answer explanations

Worked through the quiz? Here is why each correct answer is correct: the concept behind it, in plain terms.

  1. Acidic cream must be neutralized before churning, at a careful temperature. At what temperature range should cream be held when neutralizer is added?
    Correct answer: 29 to 32°C: Cream must be warm and fluid when the neutralizer goes in so the lime or soda mixes uniformly instead of churning into butter. Dairy-technology references specify holding the cream around 29 to 32 degrees C (about 85 to 90 F) during addition.
  2. Cold cream pours thickly, but warmed cream flows freely. Raising the temperature of cream does what to its viscosity?
    Correct answer: Lowers it: Heat loosens everything: fat globules soften and the serum phase flows more freely, so resistance to flow drops. Cold cream pours like syrup; warm cream pours like milk. Raising temperature lowers viscosity.
  3. A pastry chef needs cream that holds stiff peaks. What fat percentage is considered ideal for whipping cream?
    Correct answer: 30 to 35%: Whipping needs enough fat for globules to partially coalesce and trap air, but not so much that the cream churns straight to butter. Dairy texts put the sweet spot at 30 to 35 percent fat. Below that, peaks collapse.
  4. A lactometer floats higher in skim milk than in rich cream. The specific gravity of cream moves which way as its fat percentage rises?
    Correct answer: Decreases: Fat is lighter than water (specific gravity near 0.93), so every extra percent of fat lightens the mixture. A lactometer therefore floats higher in skim milk and sinks deeper in rich cream. Specific gravity decreases as fat rises.
  5. Basic and apparent are terms describing which property of ice cream mix?
    Correct answer: Viscosity: Ice cream mix is non-Newtonian, its measured viscosity depends on the shear rate applied. Basic viscosity and apparent viscosity are the terms used to report it under defined or actual shear conditions. They describe viscosity.
  6. Raising the stabilizer level does what to ice cream mix viscosity?
    Correct answer: Increases it: Stabilizers like guar, CMC, and carrageenan hydrate and thicken the serum phase, binding free water. More stabilizer means a thicker, more body-heavy mix. Viscosity increases.
  7. Raising the temperature does what to ice cream mix viscosity?
    Correct answer: Decreases it: Warming the mix gives molecules more thermal motion, so layers slide past each other with less resistance. The effect is the same as in cream: heat thins. Viscosity decreases.
  8. A higher fat content does what to ice cream mix viscosity?
    Correct answer: Increases it: Fat globules crowd the serum phase, and a higher volume of dispersed phase means more resistance to flow. Richer mixes are measurably thicker. Higher fat raises mix viscosity.
  9. A higher sugar content does what to ice cream mix viscosity?
    Correct answer: Increases it: Sugar dissolves into the serum phase and thickens it, dissolved solids raise the continuous phase’s own viscosity. A sweeter mix flows more slowly. Higher sugar increases viscosity.
  10. What effect does the presence of milk salts have on ice cream mix viscosity?
    Correct answer: Increases it: Milk salts such as calcium and phosphates interact with the proteins and reinforce the mix structure. Standard ice-cream mix factor lists note that their presence raises viscosity. It increases.
  11. What happens to ice cream mix viscosity as total soluble solids rise?
    Correct answer: Increases: Total soluble solids count everything dissolved or suspended in the water, more solids crowding the serum phase means more internal friction. The mix thickens steadily as solids climb. Viscosity increases.
  12. What does higher acidity in the mix do to its viscosity?
    Correct answer: Rise: As acidity rises, milk proteins approach their isoelectric point and begin to aggregate, which thickens the mix. Sour mixes are visibly heavier-bodied. Higher acidity raises viscosity.
  13. In which range does the specific gravity of ice cream mix fall?
    Correct answer: 1.05 to 1.12: Ice cream mix carries roughly 36 to 40 percent total solids, making it denser than water but far lighter than a syrup. Ice-cream technology texts place its specific gravity between 1.05 and 1.12.
  14. At about what temperature is the specific gravity of ice cream measured?
    Correct answer: 16 °C: Specific gravity is temperature-dependent, so it is measured at a fixed reference: 60 F, about 16 degrees C. Standardizing the temperature lets batches and formulas compare directly.
  15. What is the approximate freezing point of a typical ice cream mix?
    Correct answer: -2.5 °C: Dissolved sugars and milk salts depress the freezing point below 0 degrees C, a colligative effect. A typical mix therefore begins freezing around minus 2.5 degrees C, long before hardening temperatures.
  16. Adding sugar to ice cream mix does what to its freezing point?
    Correct answer: Lowers it: Sugar is a dissolved solute, and every solute depresses the freezing point. Add more sugar and the mix must get colder before ice crystals can form. Sugar lowers the freezing point.
  17. What is the approximate normal surface tension of ice cream mix?
    Correct answer: 48 to 53 dynes/cm: Ice cream mix surface tension runs 48 to 53 dynes/cm, well below water’s about 72. Proteins and emulsifiers adsorb at the air interface and pull the value down, which helps whipping.
  18. Glucose does what to the freezing point of ice cream?
    Correct answer: Lowers it: Glucose has a lower molecular weight than sucrose, so a given weight of it supplies more dissolved molecules, and freezing-point depression is colligative, counting molecules. More molecules, bigger depression. Glucose lowers the freezing point.
  19. What happens to the freezing point as total soluble solids in water increase?
    Correct answer: Falls: Freezing-point depression is colligative: it depends on how many solute particles crowd the water, not what they are. Raise total soluble solids and the freezing point must fall. It falls.
  20. What is the approximate minimum fat content of cream?
    Correct answer: 20%: Cream’s minimum fat sits at the light-cream end, and dairy Q and A rounds the approximate minimum to 20 percent. Note: US standards start light cream at 18 percent milkfat, so 20 percent is the rounded figure this question uses. The answer key is unchanged.