Grain Analysis & Nutrient Composition of Cereals Quiz
GIFSQ ID: ART-0942
What this quiz covers
Grain analysis starts with names. SKCS is the Single Kernel Characterization System, which measures weight, diameter, hardness and moisture one kernel at a time. HPLC is High Performance Liquid Chromatography, performance, not pressure, even though high pressure is the widespread misnomer. PAGE is polyacrylamide gel electrophoresis, and SDS-PAGE is sodium dodecyl sulphate PAGE, where the SDS coats proteins with uniform negative charge so the gel separates purely by size. The first question is a trap: NIR means near-infrared reflectance spectroscopy, but the options offer refraction, reflection and radiation, never reflectance, so none of these is the defensible answer.
The methods questions reward knowing what each tool measures. The air-oven method and Karl Fischer titration both determine moisture, one by drying, the other by a chemical reaction with water. Kjeldahl, NIR and Lowry are all legitimate ways to measure protein. Glutenin polypeptides are separated by SDS-PAGE, the size-based method, while gliadin components are separated by acid-PAGE at low pH, where charge differences dominate. In grain image analysis the length-to-width ratio is called elongation, and elongation with compactness are both standard shape descriptors. Polishing percentage, maximum length and particle mass are all grain-analysis measurements, and equilibrium moisture content, water diffusivity and grain specific weight are all moisture-related properties.
Sorghum against wheat: the composition table
The last seven questions are a small composition table from the NIN/ICMR Indian food-composition tables, and they read best as sorghum against wheat. Sorghum (jowar) carries about 10.4 g of protein per 100 g, against wheat’s 10.8 to 14. Sorghum fat is about 1.9 g per 100 g, against wheat’s 1.50. Sorghum fibre is about 1.6, against wheat’s 1.2 to 1.9, and wheat mineral content, ash, is about 1.5 g per 100 g.
How to use this quiz
Before you start, learn the abbreviations as exact words: characterization, performance, polyacrylamide. Then learn the two PAGE assignments: glutenin by SDS-PAGE, gliadin by acid-PAGE. After you finish, read the explanations below the player: each one states the correct answer and the reason in plain words, so a wrong answer becomes a fact you can carry into the next lab session or exam.
Choose how you want to play
Answer explanations
Worked through the quiz? Here is why each correct answer is correct: the concept behind it, in plain terms.
- What does NIR stand for?
Correct answer: None of these: In grain analysis, NIR spectroscopy means near-infrared reflectance spectroscopy, it measures the NIR light reflected off grain to predict protein and moisture. The options offer refraction, reflection, and radiation, but never the technique’s actual name, reflectance. So none of these is the defensible choice. Note: this is a deliberately tricky key, the familiar expansion is reflectance, not any of the three options. - What does SKCS stand for?
Correct answer: Single Kernel Characterization System: SKCS is Perten’s Single Kernel Characterization System, which measures weight, diameter, hardness, and moisture one kernel at a time. Characteristics or size versions of the name are misrememberings. Characterization is the official word. - The air-oven and Karl Fischer methods are used to determine what?
Correct answer: Moisture: The air-oven method dries grain to constant weight (gravimetric moisture), while Karl Fischer titration reacts iodine specifically with water (chemical moisture). One is physical, one is chemical, but both answer the same question. Both determine moisture. - Protein in grain can be measured by which of these methods?
Correct answer: All of these: Protein can be measured three ways here: Kjeldahl digests the sample and measures nitrogen (times 6.25), NIR predicts protein from calibrated reflectance spectra, and Lowry uses a colorimetric protein reaction. All three are legitimate protein methods. - What does HPLC stand for?
Correct answer: High Performance Liquid Chromatography: The official expansion is High Performance Liquid Chromatography, performance, not pressure. High pressure is the widespread misnomer that stuck because early pumps ran at high pressure. The correct name is performance. - What does PAGE stand for?
Correct answer: Polyacrylamide gel electrophoresis: PAGE is polyacrylamide gel electrophoresis, the gel matrix itself is polyacrylamide. Protein acrylamide mixes up the analyte with the matrix. The gel gives the method its name. - What is SDS-PAGE?
Correct answer: Sodium dodecyl sulphate PAGE: SDS (sodium dodecyl sulphate) coats proteins with uniform negative charge and unfolds them, so the gel separates purely by size. The sulphate spelling is the British variant of sulfate. - Glutenin polypeptides are separated by which technique?
Correct answer: SDS-PAGE: Glutenin subunits, especially the high-molecular-weight ones tied to breadmaking quality, are routinely fingerprinted by SDS-PAGE in wheat breeding. Size-based separation resolves the subunit pattern cleanly. That is the standard technique. - Gliadin components are separated by which technique?
Correct answer: Acid-PAGE: Gliadins separate classically by acid-PAGE, run at low pH where their charge differences dominate the separation. This was the historic method for distinguishing gliadin fractions. - In grain analysis, what is the length-to-width ratio called?
Correct answer: Elongation: In grain image analysis, the length-to-width ratio is reported as elongation. A long slender kernel scores high; a round one scores low. - Which of these are shape descriptors used in grain analysis?
Correct answer: Both of these: Elongation (length-to-width proportions) and compactness (how closely the kernel approaches a circle) are both standard shape descriptors in grain image analysis. The option both of these covers exactly those two. - Which of these are grain-analysis measurements?
Correct answer: All of these: Polishing percentage tracks degree of milling, maximum length sizes the kernel, and particle mass weighs it, each is measured somewhere in the grain-analysis workflow. All of them are real grain-analysis measurements. - Which of these are moisture-related properties of grain?
Correct answer: All of these: Equilibrium moisture content and water diffusivity are classic hygroscopic (moisture-sorption) properties; grain specific weight also shifts with moisture, so grain-analysis tables group all three as moisture-related properties. - What is the approximate protein content of sorghum (jowar) (g per 100 g)?
Correct answer: 10.4: Sorghum (jowar) carries about 10.4 g of protein per 100 g in the Indian food-composition tables (NIN/ICMR, Nutritive Value of Indian Foods). That figure sits well below wheat’s. - In which range does the protein content of wheat fall (g per 100 g)?
Correct answer: 10.8 to 14: Wheat protein varies with variety and growing conditions, and the published grain range spans 10.8 to 14 g per 100 g. Indian tables place common wheat around 11.8, inside this band. - What is the approximate fat content of sorghum (jowar) (g per 100 g)?
Correct answer: 1.9: Sorghum is a lean grain, the NIN/ICMR tables list jowar fat at about 1.9 g per 100 g. That is roughly half of maize’s fat content. - What is the approximate fat content of wheat (g per 100 g)?
Correct answer: 1.50: Whole wheat carries about 1.50 g of fat per 100 g, mostly in the germ, per the Indian food-composition tables. Milling away the germ strips most of it. - What is the approximate fibre content of sorghum (jowar) (g per 100 g)?
Correct answer: 1.6: Sorghum’s crude fibre sits near 1.6 g per 100 g in the NIN/ICMR tables, modest, since much of the bran fibre story belongs to other millets. - In which range does the fibre content of wheat fall (g per 100 g)?
Correct answer: 1.2 to 1.9: Whole-wheat crude fibre falls in the published 1.2 to 1.9 g per 100 g band; refined flour drops far below it. The range reflects varietal and milling differences. - What is the approximate mineral content of wheat (g per 100 g)?
Correct answer: 1.5: Wheat’s total mineral (ash) content is about 1.5 g per 100 g in the Indian food-composition tables. Most of it sits in the bran and germ.