Glass Transition and Thermal Analysis & Thermal Properties of Foods Quiz
GIFSQ ID: ART-0941
What this quiz covers
This quiz has two halves: glass transition temperatures, then thermal conductivity. The first fourteen questions are dry-state glass transition values from Roos’ Phase Transitions in Foods table, and every one of them is high, because water plasticizes the network and these figures are for the fully dry material. The proteins run from 146 degrees C for beta-lactoglobulin up to 208 for elastin: collagen 197, gelatin 207, gliadin 179, glutenin 189, alpha-lactalbumin 159, myoglobin 149, ovalbumin 157 and zein 165. The starches sit higher still: dry amylose 302, amylopectin 294, dry potato starch 316 and waxy maize starch 285.
The pattern inside the numbers is worth learning rather than memorising each one cold. Glutenin sits about ten degrees above gliadin because its disulfide linked polymer chains restrict motion more than gliadin’s single chains. Amylopectin sits below amylose because its branches create extra free volume, and waxy maize starch, almost pure amylopectin, sits lowest of the starch group at 285. Gelatin, the denatured form of collagen, vitrifies slightly higher than collagen itself, at 207 against 197.
Thermal conductivity: water rules
The last six questions are thermal conductivity in watts per metre per degree C, and water is the thread through them. Egg white, about 90 percent water, conducts at 0.577, while egg yolk, carrying far more fat, drops to 0.338. Milk, about 87 percent water, sits at 0.530, and whey, about 93 percent water, at 0.641. A bed of table salt grains, mostly trapped air, falls to 0.247, and ice at 0 degrees C conducts at 2.22, about 3.7 times liquid water, which is why frozen foods pick up and lose heat so much faster than thawed ones.
How to use this quiz
Before you start, learn the two ladders: proteins from 146 to 208, starches from 285 to 316. Then learn the conductivity rule: more water means higher conductivity, more fat or air means lower. After you finish, read the explanations below the player: each one states the correct answer and the reason in plain words, so a wrong answer becomes a fact you can carry into the next lab session or exam.
Choose how you want to play
Answer explanations
Worked through the quiz? Here is why each correct answer is correct: the concept behind it, in plain terms.
- Collagen’s glass transition temperature sits at about which value?
Correct answer: 197 °C: These glass-transition values are the published anhydrous (dry) figures from Roos’ Phase Transitions in Foods table. Collagen’s native triple helix locks chain motion until about 197 degrees C, which is why native collagen only softens at high temperature. - Gelatin, the denatured form of collagen, has a glass transition temperature of about what?
Correct answer: 207 °C: Denaturing collagen into gelatin unwinds the triple helix into looser random coils, and the dry network vitrifies even higher, around 207 degrees C. Disrupting the ordered helix paradoxically raises the anhydrous Tg slightly above collagen’s 197 degrees C. - Gliadin, one of the wheat gluten proteins, passes through its glass transition near which temperature?
Correct answer: 179 °C: Gliadin, the monomeric wheat gluten protein, passes through its glass transition near 179 degrees C in the dry state. Its single-chain structure gives it more mobility than the polymeric glutenins. - At about which temperature does glutenin reach its glass transition?
Correct answer: 189 °C: Glutenin is built from disulfide-linked polymer chains, which restrict molecular motion more than gliadin’s single chains. That network pushes its anhydrous glass transition up to about 189 degrees C, roughly ten degrees above gliadin. - Elastin, the stretchy connective-tissue protein, has a glass transition temperature closest to which value?
Correct answer: 208 °C: Elastin’s dense cross-linked network is famously rubbery, yet in the fully dry state it vitrifies around 208 degrees C, the highest of the proteins listed here. Cross-linking holds the chains until very high temperature. - The whey protein α-lactalbumin shows a glass transition at about which temperature?
Correct answer: 159 °C: α-lactalbumin, the smaller whey protein, shows its dry-state glass transition at about 159 degrees C. Compact globular proteins vitrify in this mid-range once water is removed. - β-Lactalbumin, the other major whey protein, transitions at roughly what temperature?
Correct answer: 146 °C: Note on the question wording: it says β-lactalbumin, but the protein meant is β-lactoglobulin, the other major whey protein alongside α-lactalbumin. Its anhydrous glass transition sits around 146 degrees C, a little below α-lactalbumin’s 159 degrees C. The answer key is unchanged. - Myoglobin’s glass transition temperature is reported at about which value?
Correct answer: 149 °C: Myoglobin, the compact oxygen-carrying muscle protein, vitrifies at about 149 degrees C in the dry state. Globular proteins cluster in this temperature band once plasticizing water is gone. - Ovalbumin reaches its glass transition at approximately what temperature?
Correct answer: 157 °C: Ovalbumin, the main egg-white protein, reaches its glass transition near 157 degrees C when dry. Its larger, more complex fold shifts Tg slightly above myoglobin’s. - Zein, the corn storage protein, has a glass transition temperature near which value?
Correct answer: 165 °C: Zein, the alcohol-soluble corn prolamin, transitions around 165 degrees C in the dry state. Its hydrophobic, helical structure holds mobility until this temperature. - Completely dry amylose transitions from glassy to rubbery at about which temperature?
Correct answer: 302 °C: Amylose’s linear chains pack into strong hydrogen-bonded networks, so dry amylose only softens around 302 degrees C. Linear polymers vitrify high because their chains align and bond tightly. - The glass transition of anhydrous amylopectin is closest to which temperature?
Correct answer: 294 °C: Amylopectin’s branches create extra free volume between chains, giving molecules slightly more room to move than in linear amylose. Its anhydrous Tg lands a touch lower, near 294 degrees C. - Dry potato starch shows a glass transition at about which temperature?
Correct answer: 316 °C: Dry potato starch vitrifies around 316 degrees C, the highest of the starch materials in the published table. Its particular granule architecture and chain packing hold the glassy state longest. - Waxy maize starch, which is almost pure amylopectin, transitions at roughly what temperature?
Correct answer: 285 °C: Waxy maize starch is almost pure amylopectin, and its heavy branching maximizes free volume among the starches here. Its anhydrous glass transition sits lowest of the group, near 285 degrees C. - Egg white is about 90% water. Which thermal conductivity, in W/(m·°C), would you expect?
Correct answer: 0.577: At roughly 90 percent water, egg white conducts heat almost like water itself. The Choi-Okos component model predicts about 0.577 W/(m·°C) for it, since water dominates, the value sits just under pure water’s. - Egg yolk carries far more fat than the white. How should its thermal conductivity in W/(m·°C) compare with the white’s 0.577?
Correct answer: 0.338: Fat conducts heat far worse than water, and yolk carries roughly a third of its weight as fat. Replacing water with fat drags conductivity down, so the yolk’s 0.338 W/(m·°C) sits well below the white’s 0.577. - Engineers sizing a plate heat exchanger for milk need its thermal conductivity. What is it in W/(m·°C)?
Correct answer: 0.530: Milk is about 87 percent water with fat and solids dispersed through it, so its conductivity lands just under water’s. Food-property tables used in heat-exchanger design list milk near 0.530 W/(m·°C) at room temperature. - A bed of table-salt grains traps air between the crystals. What is its effective thermal conductivity in W/(m·°C)?
Correct answer: 0.247: A salt bed is mostly trapped air between crystals, and still air conducts at only about 0.026 W/(m·°C). The air phase dominates the mixture, collapsing effective conductivity to roughly 0.247, an order of magnitude below solid salt. - Whey is mostly water with dissolved lactose and minerals. Which thermal conductivity, in W/(m·°C), fits?
Correct answer: 0.641: Whey is around 93 percent water with a few percent lactose and minerals dissolved in it, so it conducts heat essentially like water. Published food-property tables list whey at 0.641 W/(m·°C). - Frozen foods conduct heat much better than thawed ones. Ice at 0 °C has a thermal conductivity of about how many W/(m·°C)?
Correct answer: 2.22: Ice at 0 degrees C conducts at about 2.22 W/(m·°C), roughly 3.7 times liquid water. The crystal lattice transmits thermal vibrations far more efficiently than a liquid’s jostling molecules, which is why frozen foods pick up and lose heat so much faster than thawed ones.