Login Register

Access the GIFSQ Portal

Select your user type to log in or register a new account.

Student Portal

Access your food safety courses and exams.

Instructor Portal

Manage courses, view student submissions, and grade quizzes.

Company Portal

Manage corporate setup, view employee logs, and access QA services.

Glass Packaging – Part 3

GIFSQ ID: ART-0795

What this quiz covers

Glass and metal are the two rigid packaging materials, and this quiz covers how each is made, why it works, and where it fails. Glass is chemically inert, essentially impermeable to gases and moisture, and odourless, which is why it suits foods so well, but it is fragile, heavy, and expensive, and it cracks most readily from thermal shock because it conducts heat poorly and cannot flex. In optical terms glass is isotropic: its atoms form no ordered crystal lattice, so light passes through it the same in every direction.

Making glass is a sequence of steps with names worth learning. During refining, carbon dioxide and sulfur dioxide come off the melt, the sheared lump of molten glass fed to the forming machine is called a gob, and both blow-and-blow and press-and-blow shape molten glass into containers. Narrow-neck bottles are normally made by blow-and-blow, wide-mouth jars mostly by press-and-blow, and annealing, heating to around 540 degrees C and cooling slowly, removes the internal stress forming locks into the glass.

Metal cans and tinplate

Metal brings high mechanical strength, a superior barrier to gases, moisture, and light, and a surface that takes lacquer and decoration well. Steel, aluminium, and tin are all used for food packaging, and tinplate is low-carbon mild steel sheet, soft enough to draw and seam, then tin-coated against corrosion by hot dipping or electroplating. ECCS means electrolytically chromium-coated steel, TFS means Tin Free Steel, and the side seam of traditional three-piece cans was joined with lead-based solder, which is why lead leaching drove the move to welded seams.

How to use this quiz

Do not let the page address confuse you: it says food analysis, but all twenty questions here are glass and metal packaging, from gob forming and annealing to tinplate and can seams. Answer the questions first, then read the explanations below the player. Each one names the correct answer and the reason in plain words, so a wrong answer becomes a fact you can carry into the next lab session or exam.

Glass Packaging – Part 3
Uncategorized

Choose how you want to play

Sound effects
πŸ”ˆ Volume
Show explanations
πŸ”Š Auto-read every question
Reading speed

Answer explanations

Worked through the quiz? Here is why each correct answer is correct: the concept behind it, in plain terms.

  1. Which products use pry-off closures?
    Correct answer: Heat-processed foods: Pry-off closures seal by holding a vacuum inside the jar, which is exactly what heat-processed foods need after canning.
  2. Which packaging material cracks most readily from thermal shock?
    Correct answer: Glass: Glass conducts heat poorly and cannot flex, so a sudden temperature change builds internal stress that cracks it.
  3. In optical terms, how is glass classified?
    Correct answer: Isotropic: Glass is amorphous, its atoms form no ordered crystal lattice, so light passes through it the same in every direction.
  4. Which gases come off during the refining stage of glassmaking?
    Correct answer: Both of these: Refining drives dissolved gases out of the melt: decomposing carbonates release carbon dioxide and sulfate fining agents release sulfur dioxide.
  5. What is a lump of molten glass fed to the forming machine called?
    Correct answer: Gob: The sheared lump of molten glass dropped into the forming machine is called a gob.
  6. Which process forms molten glass into containers?
    Correct answer: Both of these: Both routes shape molten glass into containers: blow-and-blow uses compressed air twice, press-and-blow presses the parison first.
  7. Which process normally makes narrow-neck bottles?
    Correct answer: Blow-and-blow: Narrow-neck bottles are formed in two blowing stages, parison first and final shape second, which is the blow-and-blow process.
  8. Wide-mouth jars are mostly made by which process?
    Correct answer: Press-and-blow: A wide mouth needs glass pressed into shape first for even wall distribution, then blown, which is the press-and-blow sequence.
  9. Which process removes internal stress from formed glass?
    Correct answer: Annealing: Forming locks thermal stress into the glass; annealing reheats it to the annealing point and cools it slowly so the stress relaxes.
  10. Glass is annealed at around what temperature?
    Correct answer: 540 Β°C: Container glass is annealed near its annealing point, around 540 degrees C, where it is just soft enough for stress to relax.
  11. What does annealing of glass involve?
    Correct answer: Both heating and cooling: Annealing means heating the ware to the annealing temperature, holding it, then cooling it in a controlled way.
  12. Which of these are glass packaging properties?
    Correct answer: All of these: Glass is chemically inert, essentially impermeable to gases and moisture, and odourless: it gives nothing to the food and takes nothing from it.
  13. Which of these are glass packaging drawbacks?
    Correct answer: All of these: Glass breaks easily, weighs more than plastic or metal for the same pack, and costs more to make and ship.
  14. Which metals are commonly used for food packaging?
    Correct answer: All of these: Food cans and closures use steel, as tinplate or tin-free steel, aluminium, and tin coatings.
  15. In can-making, what do the letters ECCS mean?
    Correct answer: Electrolytically chromium-coated steel: ECCS is the industry name for steel coated with chromium by electrolysis, the tin-free alternative to tinplate.
  16. What does TFS stand for?
    Correct answer: Tin Free Steel: TFS is the trade name for electrolytically chromium-coated steel, which contains no tin, hence Tin Free Steel.
  17. How was the side seam of traditional three-piece cans joined?
    Correct answer: Lead-based solder: Traditional three-piece cans had their side seams joined with a lead-based solder alloy, and lead leaching into food is why the industry moved on.
  18. Which of these are metal packaging properties?
    Correct answer: All of these: Metal packs combine high mechanical strength with an excellent gas barrier, block moisture and light completely, and take lacquer and decoration well.
  19. What kind of steel is tinplate?
    Correct answer: Low-carbon: Tinplate is low-carbon mild steel sheet, soft enough to draw and seam, then tin-coated against corrosion.
  20. Which of these processes tinplate steel?
    Correct answer: Both hot dipping and electroplating: Tinplate steel is coated by exactly two routes: hot dipping the black plate in molten tin, or electroplating from tin salts.