Ghee Manufacture – Part 3
GIFSQ ID: ART-0860
What this quiz covers
This quiz finishes the ghee series with the numbers that decide profit and shelf life: fat recovery, keeping quality, adulteration, and the residue left behind. It opens with recovery figures for the creamery-butter method and the direct-cream method at two cream strengths, and with the link between fat lost in the residue and fat recovered overall. A richer cream recovers more fat, and less fat trapped in the residue means more fat in the ghee, and the quiz asks you to hold both relationships at once.
The middle questions cover keeping quality, what storage temperature, initial moisture, acidity, sediment, copper, and iron each do to it, and the chemistry behind the damage, since copper and iron drive fat oxidation. Then come the market realities: the known adulterants, vanaspati, refined vegetable oil, and animal body fat, the Baudouin test that detects vanaspati, and what high-grade melted ghee should look like, clear, transparent, and free of sediment. The last questions cover the uses of ghee, the ways fat is recovered from ghee residue, and the residue composition itself.
Why small traces cause big losses
The keeping-quality questions share one lesson: tiny amounts of the wrong thing ruin a large batch. Copper and iron are present in traces, yet they speed fat oxidation enough to shorten shelf life, and a little extra moisture or acidity does the same. That is why ghee plants test for metals and control moisture so tightly, and why the quiz treats each factor separately instead of lumping them together.
How to use this quiz
Work through the 20 questions and watch for the direction of each effect: most factors in the middle section lower keeping quality, so a careless read can flip the answer. Note the residue composition questions at the end as well, since the three quoted figures do not sit on one simple basis, and the explanations flag that plainly. Read every explanation below, because each one states why the correct answer holds.
Choose how you want to play
Answer explanations
Worked through the quiz? Here is why each correct answer is correct: the concept behind it, in plain terms.
- Fat recovery in the creamery-butter method is about what?
Correct answer: 88 to 92%. Starting from milk, the creamery-butter method recovers about 88 to 92% of the fat, the range given in De's Outlines of Dairy Technology (Table 11.29). Butter is already a concentrated fat source, so very little fat is left behind in buttermilk or residue compared with the desi route. That puts its recovery above the indigenous method's 80-85% and just below the direct-cream method's best figures. - Fat recovery in the direct-cream method (40-50% fat cream) is about what?
Correct answer: 85 to 88%. With a medium-fat cream of 40-50%, the direct-cream method recovers fat at the rate De's Outlines of Dairy Technology publishes in Table 11.29: 85-86%. The 85 to 88% option is the only choice covering that published figure, making it the correct answer. A lower-fat cream carries more serum solids, which means more ghee residue and slightly higher fat losses, while a higher-fat 65-85% plastic cream pushes recovery up to about 90-95%. - Fat recovery in the direct-cream method (65-85% fat cream) is about what?
Correct answer: 90 to 95%. Using a high-fat plastic cream of 65-85% fat, the direct-cream method recovers about 90 to 95% of the fat, the highest recovery De's Outlines of Dairy Technology (Table 11.29) reports for any method. Higher-fat cream carries fewer non-fatty solids, so less fat gets trapped in the ghee residue. That is why this variant outperforms the 40-50% fat cream version, which recovers roughly 85-86%. - What level of fat loss in the residue leads to higher fat recovery in ghee making?
Correct answer: Lower only. Less fat lost in the residue means more fat ends up as ghee, so lower residue fat loss gives higher fat recovery. The two move in opposite directions. That is why every step that keeps fat out of the ghee residue raises overall recovery. - Lower fat loss in ghee residue is linked to which solids content in the residue?
Correct answer: Lower non-fatty solids only. A lower fat loss in ghee residue is linked to lower non-fatty solids in the residue: De's note to Table 11.29 attributes the higher recovery from higher-testing cream to its lower fat loss in ghee-residue, which follows from the residue's lower non-fatty solids content. More solids-not-fat in the residue traps more fat. So cream with fewer serum solids loses less fat. - What does a higher storage temperature do to the keeping quality of ghee?
Correct answer: Fall only. Warm storage accelerates both fat oxidation and hydrolysis in ghee, so keeping quality falls as storage temperature rises. Cool, dry storage keeps the fat stable much longer. That is why ghee held at higher temperatures turns rancid faster. - What does higher initial moisture do to the keeping quality of ghee?
Correct answer: Fall only. Extra moisture in ghee fuels hydrolysis of triglycerides into free fatty acids and lets microbes survive, so keeping quality falls when initial moisture is higher. Well-made ghee holds moisture at not more than about 0.5%. Drier ghee keeps longer. - What does higher initial acidity do to the keeping quality of ghee?
Correct answer: Fall only. High initial acidity means free fatty acids are already present, a head start toward rancid and soapy off-flavours, so keeping quality falls. Fresh, low-acid ghee stays sweet-flavoured longer. Acidity is therefore a recognized predictor of storage life. - What does higher initial sediment do to the keeping quality of ghee?
Correct answer: Fall only. More sediment means more protein and curd particles left in the ghee, which brown and spoil faster in storage, so keeping quality falls with higher initial sediment. Careful filtration or settling removes them. Clean ghee keeps its flavour longer. - What does a higher copper content do to the keeping quality of ghee?
Correct answer: Fall only. Copper is a potent pro-oxidant that catalyzes fat oxidation even at trace levels, so higher copper content makes keeping quality fall. Ghee should never contact copper vessels. Stainless steel or properly tinned equipment avoids this defect. - What does a higher iron content do to the keeping quality of ghee?
Correct answer: Fall only. Iron, like copper, catalyzes oxidative rancidity in milk fat, so higher iron content makes keeping quality fall. Even traces picked up from equipment can start the oxidized, oily, metallic defect. Properly tinned or stainless vessels keep iron out of the product. - Copper and iron in ghee cause which type of deterioration?
Correct answer: Fat oxidation. Copper and iron cause fat oxidation: they catalyze the breakdown of unsaturated fatty acids into the peroxides and carbonyls behind oxidized, oily and metallic off-flavours in ghee. They do not cause protein hydrolysis, and the defect is oxidative rather than hydrolytic rancidity. That is why metal contamination is the classic cause of the oxidized defect. - Which of these are known ghee adulterants?
Correct answer: All three: vanaspati, refined vegetable oil and animal body fat. Vanaspati, refined vegetable oil and animal body fat are all recognized ghee adulterants: each is a cheaper fat that can be blended into ghee, and each is caught by specific tests, for example the Baudouin test for vanaspati. Their presence lowers the Reichert value and raises the iodine value. All three belong on any adulteration checklist. - Which test detects vanaspati in ghee?
Correct answer: Baudouin test. The Baudouin test detects vanaspati in ghee: it gives a pink colour with sesame oil, and vanaspati is required to contain a small proportion of sesame oil as a marker. A positive Baudouin test on ghee therefore reveals vanaspati adulteration. Pure ghee gives a negative test. - When high-grade ghee is melted, it should look how?
Correct answer: All three: clear, transparent and free of sediment. When high-grade ghee melts it should be clear, transparent and free of sediment: suspended curd particles or sediment signal poor clarification or adulteration. A clean melt shows the ghee was properly clarified and filtered. Any cloudiness or residue at the bottom is a quality defect. - Ghee is used for which purposes?
Correct answer: All three: cooking, confectionery and direct consumption. Ghee is used for cooking, in confectionery and for direct consumption: its high smoke point and rich flavour suit frying and tadka, its aroma carries sweets and bakery products, and it is eaten as-is on rice, rotis and in rituals. These three outlets together absorb most ghee production. - Ghee can be recovered from ghee residue by which techniques?
Correct answer: Both centrifugal separation and pressure expression. Fat can be recovered from ghee residue by both centrifugal separation and pressure expression: the centrifuge spins free fat out of the hot residue mass, while pressing squeezes out the fat trapped in the solids matrix. Both are standard recovery techniques in organized dairies. Recovered fat can be blended back or used separately. - What is the approximate water content of cow-milk ghee residue?
Correct answer: 49.7%. - What is the approximate fat content of cow-milk ghee residue?
Correct answer: 81.4%. - What is the approximate protein content of cow-milk ghee residue?
Correct answer: 24.8%. Cow-milk ghee residue is protein-rich, and about 24.8% protein sits squarely inside published analyses, which place residue protein between roughly 12 and 39% (Santha and Narayanan, 1978; CBSE Dairy Products Technology handbook). The protein is mostly heat-denatured casein and whey protein left behind after the fat is drawn off. That is why ghee residue is valued as a protein and flavour ingredient.