Login Register

Access the GIFSQ Portal

Select your user type to log in or register a new account.

Student Portal

Access your food safety courses and exams.

Instructor Portal

Manage courses, view student submissions, and grade quizzes.

Company Portal

Manage corporate setup, view employee logs, and access QA services.

Food Process Engineering Quiz

GIFSQ ID: ART-1002

What this quiz covers

This quiz covers food process engineering in two blocks: electromagnetic waves and microwaves, then osmotic membrane distillation. Penetration is highest at low frequency with low loss, food microwaves run at 915 and 2450 MHz, and the salt-and-sugar solution absorbs microwaves best because salts add ionic conduction to water’s dipolar rotation. The triple point of water sits at 0.01 degrees and 4.58 mmHg, Stokes’ law gives terminal velocity, rubber rollers husk paddy by friction, and emery-coated rollers dehusk legumes.

The second half is a deep dive into osmotic membrane distillation, or OMD. The membrane must be hydrophobic so only vapour crosses, the decisive property is hydrophobicity, and PTFE, polypropylene and PVDF are all standard materials. The osmotic agents are concentrated salt and sugar solutions, the process moves both heat and mass, flux rises with temperature, and direct osmosis runs at ambient temperature with no applied pressure. The quiz also names supercritical fluid extraction as the best method for essential oils.

OMD is one idea: keep the pores dry

Nearly every OMD question follows from a single rule: the membrane must stay non-wetted so only water vapour crosses the pores. That is why the membrane is hydrophobic, why hydrophobicity is the decisive property, why wettability and the Laplace equation matter, and why the liquid-entry pressure is the number that guards the process.

How to use this quiz

Work through all 20 questions, and for every OMD question ask first what keeps the pores dry and what drives the vapour across. The explanations below give the reason behind each correct answer, so a wrong answer still teaches the rule.


Food Process Engineering Quiz
Uncategorized

Choose how you want to play

Sound effects
πŸ”ˆ Volume
Show explanations
πŸ”Š Auto-read every question
Reading speed

Answer explanations

Worked through the quiz? Here is why each correct answer is correct: the concept behind it, in plain terms.

  1. When is EM-wave penetration highest?
    Correct answer: Low frequency, low loss. Penetration depth grows as frequency and dielectric loss fall, because the wave is absorbed less as it travels, so penetration is highest at low frequency with low loss.
  2. How would you describe microwave frequencies used in food processing?
    Correct answer: 915 and 2450 MHz. Food-industry microwave systems operate in the two allocated bands, 915 MHz and 2450 MHz.
  3. What is the triple point of water?
    Correct answer: 0.01Β°C and 4.58 mmHg. The triple point of water, where ice, liquid water and vapor coexist in equilibrium, is 0.01 degrees at 4.58 mmHg.
  4. What is Stokes' law used to determine?
    Correct answer: Terminal velocity. Stokes’ law relates the drag on a settling particle to its diameter and speed, so engineers use it to calculate the terminal velocity at which particles settle or cream.
  5. What absorbs microwaves most?
    Correct answer: Salt and sugar solution. Microwave heating comes from water’s dipolar rotation plus ionic conduction from dissolved salts, so the salt-and-sugar solution absorbs more than plain water or sugar solution alone.
  6. On what principle do rubber rollers in paddy husking work?
    Correct answer: Friction. The two rubber rolls rotate at different surface speeds, and the shearing friction in the nip between them strips the husk from each paddy grain.
  7. What are emery-coated rollers used for?
    Correct answer: Legume milling. Emery-coated abrasive rollers are the classic dehusking device in legume milling: their rough surface abrades the husk off pulses.
  8. Which of these can be measured?
    Correct answer: Pressure, temperature, and momentum. Pressure, temperature and momentum are all physical quantities that instruments can measure, so all three are measurable.
  9. Which one is the best method for extracting essential oils?
    Correct answer: Supercritical fluid extraction. The quiz key names supercritical fluid extraction as the best method: it works without damaging heat and leaves no solvent residue in the extract.
  10. Which duties can osmotic membrane distillation perform?
    Correct answer: Both of these. Osmotic membrane distillation runs near ambient temperature and can pre-concentrate a feed as well as concentrate it to high final solids.
  11. What type of microporous membrane separates the streams in osmotic membrane distillation?
    Correct answer: Hydrophobic. The membrane must stay dry so only water vapor, not liquid, crosses the pores, which demands a hydrophobic microporous membrane.
  12. Which of these are suitable osmotic agents for OMD?
    Correct answer: All of these. Magnesium sulfate, sodium chloride and calcium chloride all form concentrated solutions with strong osmotic pull, which is what drives water vapor across the membrane.
  13. Which other compounds work as osmotic agents in OMD?
    Correct answer: All of these. Glycerol, brine and magnesium chloride are likewise used as high-osmotic-strength stripping solutions in OMD.
  14. Which types of transfer happen in osmotic membrane distillation?
    Correct answer: Both of these. OMD couples the movement of water vapor across the membrane with the heat transfer that evaporates it on the feed side and condenses it on the strip side.
  15. What are OMD membranes made of?
    Correct answer: All of these. OMD membranes are made from hydrophobic polymers, and PTFE, polypropylene and PVDF are all standard choices.
  16. In osmotic membrane distillation, which membrane property is the decisive parameter?
    Correct answer: Hydrophobicity. If the pores wet out, liquid leaks through and the process collapses, so keeping the membrane non-wetted matters more than pore size or porosity.
  17. What is osmotic membrane distillation associated with?
    Correct answer: Both of these. The liquid-entry pressure that keeps the pores dry comes from the Young-Laplace equation, which describes how wettability and pore size resist liquid intrusion.
  18. What influences OMD flux?
    Correct answer: Both of these. Flux depends on the vapor-pressure difference across the membrane, set by the feed conditions on one side and the osmotic agent concentration on the other.
  19. What happens to transmembrane flux as temperature rises?
    Correct answer: Increases. Raising the temperature increases the feed-side vapor pressure, steepening the driving force, so transmembrane flux increases as temperature rises.
  20. How can direct osmosis be described?
    Correct answer: Both of these. Direct osmosis runs at ambient temperature with no applied pressure, driven only by the concentration difference across the membrane: both athermal and non-pressure-driven.