Dairy Processing & Meat Processing Quiz
GIFSQ ID: ART-0919
What this quiz covers
This quiz pairs dairy processing with meat cookery, and the two halves share one habit: every fact is a number or a named method. The dairy half opens with ghee: the direct cream method gives the highest fat recovery, about 95 percent, because it skips the butter step where fat is lost to buttermilk, and finished ghee must contain at least 99.5 percent milk fat.
Methods and calculations carry the middle of the quiz. Vacreation deodorizes cream by steam distillation under reduced pressure, stormy fermentation is curd ripped apart by rapid gas production, and rennin, or chymosin, forms the curd in cheese by cleaving kappa-casein.
Meat cookery: broiling, roasting and the temperatures that matter
The meat half tests cooking by heat and temperature. Broiling puts meat directly over an open fire or gas flame at about 256 C, and it suits tender cuts at least 2 to 5 cm thick, while roasting is keyed as the juiciest, most tender dry-heat method for large cuts. Overheated fat breaks down into acrolein, the pungent aldehyde, and heating shrinks the muscle lattice so water-holding capacity falls and overcooked meat dries out. Pork must reach about 58 C to kill Trichinella, meat is pasteurized around 58 to 75 C, bacon comes from pork bellies, and sausage takes its name from the Latin salsus, meaning salted.
How to use this quiz
Before you start, learn the ghee numbers: 95 percent recovery by the direct cream method, 99.5 percent minimum fat. Then learn the two temperature pairs: broiling at 256 C, pork at 58 C. After you finish, read the explanations below the player: each one states the correct answer and the reason in plain words, so a wrong answer becomes a fact you can carry into the next lab session or exam.
Choose how you want to play
Answers explained
Each answer below gives the correct choice and the reason behind it, in the same order as the questions above.
- The percentage of fat recovery in ghee is highest in which method?
Correct answer: Direct cream: The direct cream method gives the highest fat recovery in ghee , about 95% when high-fat (plastic) cream is used , because it skips the butter-making step where fat is lost to buttermilk. - What is ghee usually adulterated with?
Correct answer: All of the above: Ghee is adulterated with vanaspati (hydrogenated vegetable fat), animal body fats, and refined vegetable oils , all of them, since each mimics ghee’s texture or dilutes its cost. - Which of these is the byproduct of the paneer, channa, and casein dairy industries?
Correct answer: Whey: Whey is the byproduct left after casein is coagulated out in paneer, channa, and casein manufacture , the greenish-yellow serum containing lactose, whey proteins, and minerals. - What is the milk serum (whey) devoid of?
Correct answer: Both casein and fat: Milk serum (whey) is devoid of both casein and fat in the classical sense: the casein has been precipitated into the curd and the fat largely carried with it. - What is ripping apart of curd by rapid gas production called?
Correct answer: Stormy fermentation: Stormy fermentation is the violent ripping apart of curd by rapid gas production , classically by Clostridium perfringens in litmus milk, tearing the coagulum. - What is deodorization of cream by steam distillation under reduced pressure called?
Correct answer: Vacreation: Vacreation is the deodorization of cream by steam distillation under reduced pressure, stripping volatile off-flavors (feed, weed taints) before butter making. - How many parts by weight of 40% cream must be mixed with 3% milk to make milk testing 5% fat?
Correct answer: 2.0: The Pearson square gives parts of 40% cream = |5 − 3| = 2 parts per 35 parts of 3% milk (parts of milk = |40 − 5| = 35). - What minimum percentage of fat does ghee contain?
Correct answer: 99.5: Ghee must contain a minimum of 99.5% milk fat under Indian standards (FSSAI) , it is essentially pure butterfat with moisture and solids-not-fat removed. - Cold milk enters at 5 °C, reaches 63 °C after regeneration and 71 °C after final heating. What is the regeneration percentage?
Correct answer: 87.9%: Regeneration percentage = (63 − 5)/(71 − 5) × 100 = 58/66 × 100 = 87.9%. The cold milk recovers that fraction of the total heating duty (5 °C → 71 °C) in the regenerator before final heating. - In cheese manufacture, curd is formed by the addition of which enzyme?
Correct answer: Rennin: Rennin (chymosin), the milk-clotting enzyme of rennet, forms curd in cheese manufacture by specifically cleaving κ-casein and destabilizing the micelles. - Which cooking method puts meat directly over an open fire or gas flame?
Correct answer: Broiling: Broiling puts meat directly over an open fire or gas flame , intense radiant heat cooking thin, tender cuts fast. - Broiling uses intense direct heat at about what temperature?
Correct answer: 256 °C: Broiling is intense direct radiant heat at about 500 °F (256–288 °C), the fixed broiling temperature in standard oven broiling charts. - Which method generally gives the juiciest, most tender meat?
Correct answer: Roasting: Among the listed dry-heat methods, roasting generally gives the juiciest, most tender result: large cuts cook in their own juices at moderate oven heat with minimal handling, so moisture loss is lower than under the fierce direct heat of broiling or grilling. Note: roasting suits large tender cuts well, but for tough cuts a moist method such as braising gives the tenderest result, so this is the quiz’s key among dry-heat methods. - Overheated meat fat breaks down into a pungent compound — which one?
Correct answer: Acrolein: Overheated fat breaks down into acrolein , the pungent, eye-irritating aldehyde formed when glycerol dehydrates at frying temperatures. - What does heating do to the water-holding capacity of meat?
Correct answer: Decreases it: Heating decreases meat’s water-holding capacity: proteins denature and the myofilament lattice shrinks, squeezing out juice , the reason overcooked meat is dry. - Broiling suits tender cuts at least how thick?
Correct answer: 2–5 cm: Broiling suits tender cuts at least 2–5 cm thick , thick enough that the interior stays juicy while the intense direct heat browns the surface. - Pork must reach about what internal temperature to destroy the trichinosis parasite?
Correct answer: 58 °C: Pork must reach about 58 °C (137 °F) internally to destroy Trichinella spiralis , the classic instantaneous thermal death point for the trichinosis parasite. Note: 58 C is the classic thermal death point for Trichinella, while the USDA consumer-safe recommendation with a margin is 63 C, so cook to the higher figure in practice. - At what temperature is meat pasteurized?
Correct answer: 58–75°C: Meat is pasteurized at about 58–75 °C , temperatures that destroy vegetative pathogens while keeping the product’s texture acceptable. - Where does bacon come from?
Correct answer: Pork bellies: Bacon comes from pork bellies , the fatty belly cut cured and smoked into the familiar streaky rashers. Veal and buffalo meat are not bacon sources. - What does the Latin ‘salsus’, root of ‘sausage’, mean?
Correct answer: Salt: The Latin ‘salsus’ means salted , the root of ‘sausage’, reflecting the cured, salted origins of sausage making.