Login Register

Access the GIFSQ Portal

Select your user type to log in or register a new account.

Student Portal

Access your food safety courses and exams.

Instructor Portal

Manage courses, view student submissions, and grade quizzes.

Company Portal

Manage corporate setup, view employee logs, and access QA services.

Physical Properties – Part 5

GIFSQ ID: ART-0767

What this quiz covers

Milk looks simple in a glass, but a dairy lab measures it with a whole set of physical tests, and this quiz walks through them. The first questions are about density: fat is the lightest part of milk, so removing it leaves a denser liquid behind, and among the milk solids the dissolved mineral salts are the densest of all. That is why skim milk reads higher on a lactometer than whole milk, and why buffalo milk, with its extra solids, reads higher than cow milk.

The next group covers freezing point, surface tension and pH. Dissolved lactose and salts push milk’s freezing point below zero, and the size of that drop is so steady that a cryoscope can spot watered milk from a tiny change. Milk is an oil-in-water emulsion, fat droplets floating in water, which is why cream rises and why homogenisation matters. Its surface tension sits below that of pure water, its pH sits near 6.8, and its water activity is almost 1.

Light, powders and the second half

The second half of the quiz turns to light and powders. Refractive index is measured at the sodium D line, 589 nm, because a single standard wavelength keeps results comparable. Translucency, gloss and fluorescence are all optical properties, they describe how a material handles light, not how it flows or breaks. Powdered foods bring their own vocabulary: agglomeration, particle size distribution and segregation.

How to use this quiz

Take the twenty questions in order, because the first half builds one picture of milk and the second half builds a second picture of light and powders. For the milk numbers, anchor on a few: freezing point depression near 0.55 degrees C, freezing point near minus 0.53 degrees C, pH near 6.8, water activity near 0.995, and fat globules near 920 kg per cubic metre. For the light questions, remember that anything describing how light bends, passes through, reflects or glows is optical.

Physical Properties – Part 5
Uncategorized

Choose how you want to play

Sound effects
🔈 Volume
Show explanations
🔊 Auto-read every question
Reading speed

Answers explained

Each answer below repeats the question, gives the correct answer from the quiz bank, and explains the science behind it in plain words.

  1. Fat lightens milk, so removing it should densify what remains. Which of these has the highest specific gravity?
    1. Whole milk
    2. Buffalo milk
    3. Skim milk (correct answer)
    4. Standardized milk

    Correct answer: Skim milk. Removing the light fat leaves the denser solids behind, so skim milk has the highest specific gravity of the four.
  2. Each milk constituent has its own density. Which milk constituent has the highest specific gravity?
    1. Fat
    2. Protein
    3. Lactose
    4. Mineral salts (correct answer)

    Correct answer: Mineral salts. Dissolved mineral salts are the densest milk constituent — denser than protein, lactose or fat.
  3. Pure water freezes at 0°C, but milk is a solution of sugars and salts. Milk freezes at a temperature that is what relative to pure water?
    1. The same as water
    2. Lower than water (correct answer)
    3. Higher than water
    4. Milk does not freeze

    Correct answer: Lower than water. Dissolved lactose and salts depress the freezing point, so milk freezes below 0 °C.
  4. A cryoscope measures how far below 0°C milk freezes. The average freezing point depression of cow milk is about how much?
    1. 0.647°C
    2. 0.347°C
    3. 0.547°C (correct answer)
    4. 0.447°C

    Correct answer: 0.547°C. Cow milk's dissolved solids depress its freezing point by about 0.547 °C — the figure the cryoscope is calibrated on.
  5. Buffalo milk goes into the cryoscope next. Roughly how large is its average freezing point depression?
    1. 0.649°C
    2. 0.349°C
    3. 0.549°C (correct answer)
    4. 0.449°C

    Correct answer: 0.549°C. Buffalo milk's extra solids push its freezing point depression to about 0.549 °C.
  6. Milk looks uniform because fat droplets float suspended in water. Milk is which type of emulsion?
    1. Oil in water (correct answer)
    2. Water in oil
    3. Not an emulsion
    4. Multiple emulsion

    Correct answer: Oil in water. Milk is fat droplets dispersed in water — an oil-in-water emulsion.
  7. What is the approximate surface tension of milk at 20 °C?
    1. 20 to 40 dynes/cm
    2. 40 to 60 dynes/cm (correct answer)
    3. 60 to 80 dynes/cm
    4. 80 to 100 dynes/cm

    Correct answer: 40 to 60 dynes/cm. Milk's surface tension at 20 °C is about 40–60 dynes/cm — well below water's 72.
  8. What is the approximate freezing point of milk?
    1. -0.532 °C (correct answer)
    2. -0.222 °C
    3. -0.952 °C
    4. 0 °C

    Correct answer: -0.532 °C. Milk freezes at about −0.532 °C, the table's freezing-point figure.
  9. Around what is the pH of natural milk?
    1. 5.8
    2. 6.8 (correct answer)
    3. 8.8
    4. 10.2

    Correct answer: 6.8. Fresh milk sits near pH 6.8 — just on the acid side of neutral.
  10. What is the approximate density of milk fat globules at 20 °C?
    1. 920 kg/m³ (correct answer)
    2. 1100 kg/m³
    3. 1300 kg/m³
    4. 1700 kg/m³

    Correct answer: 920 kg/m³. Milk fat globules are lighter than water — about 920 kg/m³ at 20 °C, which is why cream rises.
  11. What is the approximate density of casein micelles at 20 °C?
    1. 920 kg/m³
    2. 1100 kg/m³ (correct answer)
    3. 1300 kg/m³
    4. 1700 kg/m³

    Correct answer: 1100 kg/m³. Casein micelles are denser than water — about 1100 kg/m³ at 20 °C.
  12. What is the approximate water activity of milk?
    1. 0.785
    2. 0.825
    3. 0.895
    4. 0.995 (correct answer)

    Correct answer: 0.995. Milk is almost pure water in activity terms — about 0.995.
  13. Milk's refractive index is generally measured at which wavelength?
    1. 523 nm
    2. 553 nm
    3. 573 nm
    4. 589 nm (correct answer)

    Correct answer: 589 nm. Refractive index is measured at the sodium D line, 589 nm.
  14. Which of these are properties of powdered foods?
    1. Agglomeration
    2. Particle size distribution
    3. All of these (correct answer)
    4. Segregation

    Correct answer: All of these. Powdered foods show agglomeration, a particle-size spread and segregation together.
  15. What does agglomeration in powdered foods relate to?
    1. Size enlargement
    2. All of these (correct answer)
    3. Enhanced flowability
    4. Enhanced dispersibility

    Correct answer: All of these. Agglomeration is controlled size enlargement — for better flow and dispersibility together.
  16. Refractive index is which kind of material property?
    1. Optical (correct answer)
    2. Mechanical
    3. None of these
    4. Rheological

    Correct answer: Optical. Refractive index describes how light bends — an optical property.
  17. Translucency is which kind of material property?
    1. Optical (correct answer)
    2. Rheological
    3. None of these
    4. Mechanical

    Correct answer: Optical. Translucency is about light transmission — an optical property.
  18. Gloss is which kind of material property?
    1. Rheological
    2. Mechanical
    3. Optical (correct answer)
    4. None of these

    Correct answer: Optical. Gloss is the way a surface reflects light — an optical property.
  19. Fluorescence is which kind of material property?
    1. Mechanical
    2. None of these
    3. Optical (correct answer)
    4. Rheological

    Correct answer: Optical. Fluorescence is light emission — an optical property.
  20. Which of these processes change with wavelength?
    1. All of these (correct answer)
    2. Absorption
    3. Transmittance
    4. Reflectance

    Correct answer: All of these. Absorption, transmittance and reflectance all vary with wavelength — that is why color exists.