Login Register

Access the GIFSQ Portal

Select your user type to log in or register a new account.

Student Portal

Access your food safety courses and exams.

Instructor Portal

Manage courses, view student submissions, and grade quizzes.

Company Portal

Manage corporate setup, view employee logs, and access QA services.

Other Food Engineering Topics – Part 6

GIFSQ ID: ART-0827

What this quiz covers

This quiz sorts the fittings and instruments of a food plant into their right boxes, starting with the boiler. A water level indicator counts as a boiler mounting, while the economizer, feed pump and air preheater are accessories that improve efficiency. A reciprocating pump delivers liquid in pulses rather than a steady stream. A calorimeter measures heat given off or absorbed during a process. As the moisture of a granular material rises, its angle of repose increases, and on a warm day a chimney’s draught weakens.

For a wall of thickness x and area A, the term kA divided by x is the thermal conductance, while its reciprocal is the thermal resistance. Dropwise condensation gives very high heat transfer because it leaves bare surface exposed for fresh vapour to condense on. The liquid that passes through the filter is the filtrate. Weight sorters grade eggs, apples and oranges, but not paddy. The uniformity index tells the relative share of coarse, medium and fine particles in a powder, and the energy of an electromagnetic wave is inversely proportional to its wavelength.

Grading, steam and instruments

Grading means sorting a product on the basis of quality, and a panel board that carries no graphic symbols is classified as non-graphic. The steam example works out as hf plus dryness times hfg: 720.9 plus 0.8 times 2046.5 gives 2358.1 kilojoules per kilogram. The Sherwood number is the mass-transfer counterpart of the Nusselt number, the Stefan-Boltzmann law applies to radiation, and a cyclone separator uses spinning flow to strip suspended particles from a stream. In batch expression of fruit juice the hydraulic ram press is used, a thermocouple is measured with a potentiometer circuit, and a pressure gauge measures liquid level indirectly from pressure.

How to use this quiz

Learn the boiler split before you start: mountings are safety fittings, accessories save energy. Then keep the two numbers together: kA over x is conductance, and the steam example works out to 2358.1. After you finish, read the explanations below the player: each one states the correct answer and the reason in plain words, so a wrong answer becomes a fact you can carry into the next lab session or exam.

Other Food Engineering Topics – Part 6
Uncategorized

Choose how you want to play

Sound effects
🔈 Volume
Show explanations
🔊 Auto-read every question
Reading speed

Note: the player shuffles the questions and the answer options on every attempt, so the numbers in the player will not match the numbers in the explanations below. Match each answer by its wording.

Answer explanations

Worked through the quiz? Here is why each correct answer is correct: the concept behind it, in plain terms.

  1. Which of these counts as a boiler mounting rather than an accessory?
    1. Water level indicator (correct answer)
    2. Economizer
    3. Feed pump
    4. Air preheater

    Correct answer: Water level indicator: A boiler mounting is a safety fitting the boiler cannot run without, and the water level indicator is one; the economizer, feed pump and air preheater are accessories that improve efficiency.
  2. Which pump delivers liquid in pulses rather than a steady stream?
    1. Centrifugal pump
    2. Rotary pump
    3. Reciprocating pump (correct answer)
    4. Jet pump

    Correct answer: Reciprocating pump: A reciprocating pump pushes liquid out in strokes, so delivery comes in pulses rather than a steady stream.
  3. What is a calorimeter used for?
    1. Measuring the heat of a reaction only
    2. Storing heat from a chemical reaction
    3. Measuring specific gravity
    4. Measuring heat given off or absorbed during a process (correct answer)

    Correct answer: Measuring heat given off or absorbed during a process: A calorimeter measures the heat a process gives off or absorbs, which is how reaction heats and calorific values are found.
  4. As the moisture content of a granular material rises, what happens to its angle of repose?
    1. It becomes zero
    2. It stays the same
    3. It decreases
    4. It increases (correct answer)

    Correct answer: It increases: Wet grains stick together, so the heap stands steeper and the angle of repose increases as moisture rises.
  5. On a warm day, what happens to a chimney’s draught?
    1. It weakens (correct answer)
    2. It strengthens
    3. It stays the same
    4. It reverses direction

    Correct answer: It weakens: Chimney draught comes from the density difference between hot flue gas and outside air, and on a warm day that difference shrinks, so the draught weakens.
  6. For a wall of thickness x and area A, what does the term kA/x represent?
    1. Thermal resistance
    2. Thermal conductance (correct answer)
    3. Heat flux density
    4. Thermal loading

    Correct answer: Thermal conductance: For a wall of thickness x and area A, kA divided by x is the thermal conductance; its reciprocal, x divided by kA, is the thermal resistance.
  7. Which type of condensation gives very high heat transfer because it leaves bare surface areas exposed?
    1. Film condensation
    2. Dropwise condensation (correct answer)
    3. Condensation boiling
    4. Surface condensation

    Correct answer: Dropwise condensation: Dropwise condensation leaves bare surface exposed between the drops, so fresh vapour condenses directly on the metal and heat transfer is very high.
  8. What is the liquid that passes through the filter during filtration called?
    1. Feed slurry
    2. Filtrate (correct answer)
    3. Filter medium
    4. Precoat

    Correct answer: Filtrate: The liquid that passes through the filter is the filtrate; the feed slurry goes in and the solids stay behind as cake.
  9. Weight sorters are used to grade eggs, apples and oranges. For which of these are they NOT used?
    1. Eggs
    2. Apples
    3. Paddy (correct answer)
    4. Oranges

    Correct answer: Paddy: Weight sorters grade eggs, apples and oranges by weight, but paddy is graded by size and density, not by individual grain weight.
  10. Which index tells you the relative share of coarse, medium and fine particles in a powder?
    1. Fineness modulus
    2. Uniformity index (correct answer)
    3. Average particle size
    4. Effectiveness

    Correct answer: Uniformity index: The uniformity index tells the relative share of coarse, medium and fine particles in a powder, which is what a miller needs to judge a grind.
  11. How does the energy of an electromagnetic wave relate to its wavelength?
    1. Inversely proportional (correct answer)
    2. Directly proportional
    3. Unrelated
    4. Proportional to the square

    Correct answer: Inversely proportional: A shorter wavelength means a higher frequency and more energy per photon, so energy is inversely proportional to wavelength.
  12. Grading means sorting a product on the basis of which attribute?
    1. Quantity
    2. Quality (correct answer)
    3. Simplicity
    4. Size only

    Correct answer: Quality: Grading sorts a product on the basis of quality, such as ripeness, colour and freedom from defects, while sizing sorts by size alone.
  13. How are panel boards classified when they carry no graphic symbols?
    1. Graphic
    2. Non-graphic (correct answer)
    3. Semi-graphic
    4. Multi-graphic

    Correct answer: Non-graphic: A panel board that carries no graphic symbols is classified as non-graphic, as opposed to a graphic panel that shows the process in symbols.
  14. What is the enthalpy of 1 kg of steam at 8 bar with dryness fraction 0.8, if hf is 720.9 and hfg is 2046.5 kJ/kg?
    1. 2767.4 kJ/kg
    2. 2358.1 kJ/kg (correct answer)
    3. 1325.6 kJ/kg
    4. 2046.5 kJ/kg

    Correct answer: 2358.1 kJ/kg: Enthalpy is hf plus dryness times hfg: 720.9 plus 0.8 times 2046.5 equals 2358.1 kilojoules per kilogram.
  15. Which mass transfer number is the counterpart of the Nusselt number in heat transfer?
    1. Grashof number
    2. Rayleigh number
    3. Reynolds number
    4. Sherwood number (correct answer)

    Correct answer: Sherwood number: The Sherwood number is the mass-transfer counterpart of the Nusselt number, comparing convective mass transfer with diffusion just as Nusselt compares convective heat transfer with conduction.
  16. The Stefan-Boltzmann law applies to heat transfer by which mode?
    1. Conduction
    2. Convection
    3. Conduction and convection
    4. Radiation (correct answer)

    Correct answer: Radiation: The Stefan-Boltzmann law gives the energy radiated by a black body, so it applies to heat transfer by radiation.
  17. Which device uses spinning flow to strip suspended particles from a gas or liquid stream?
    1. Magnetic separator
    2. Screen separator
    3. Cyclone separator (correct answer)
    4. Gravity settler

    Correct answer: Cyclone separator: A cyclone separator spins the stream so centrifugal force throws suspended particles outward, stripping them from the gas or liquid.
  18. In batch expression of fruit juice, which press is used?
    1. Screw press
    2. Hydraulic ram press (correct answer)
    3. Magnetic press
    4. Ball mill

    Correct answer: Hydraulic ram press: In batch expression of fruit juice the hydraulic ram press is used, squeezing the pulp in a batch press rather than a continuous screw.
  19. What kind of circuit is used to measure a thermocouple’s output?
    1. Electrical circuit
    2. Potentiometer circuit (correct answer)
    3. Electronic circuit
    4. Wheatstone bridge

    Correct answer: Potentiometer circuit: A thermocouple’s small voltage is measured with a potentiometer circuit, which balances it against a known voltage.
  20. Which device measures liquid level indirectly, from pressure?
    1. Pressure gauge (correct answer)
    2. Float
    3. Bob and tape
    4. Sight glass

    Correct answer: Pressure gauge: A pressure gauge measures liquid level indirectly, from the hydrostatic pressure at the bottom of the vessel, which rises with the liquid height.