Microwave and Dielectric Heating – Part 2
GIFSQ ID: ART-0814
What this quiz covers
Microwave heating works because some materials absorb the field and others let it pass, and this quiz tests the second half of the microwave and dielectric heating set: the dielectric numbers of foods and packaging materials. You will meet free water against bound water, PET and CPET trays, polyethylene, Plexiglass, Teflon, borosilicate glass, and royal grey paper, each with its dielectric constant and loss factor.
Twenty questions cover free water showing high dielectric loss and bound water showing low loss; PET at 3.5 and 0.01 at 1 kHz; crystallized PET at 3.3 and 0.002; polyethylene at 2.25 and 0.0026 at 3 GHz; Plexiglass at 2.6 and 0.015; Teflon at 2.1 and 0.0003; borosilicate glass at 3.84 and 0.0026; royal grey paper at 3.0 and 0.216 at 1 GHz against 2.94 and 0.235 at 3 GHz; and the medium frequency range of 3 to 30 MHz against the high range of 30 to 300 MHz.
Concepts you will need
Two numbers describe each material: the dielectric constant says how much field it stores, and the loss factor says how much field it turns into heat. Packaging materials stay low on both, so the tray stays cool while the food heats. Learn each material as a pair of numbers, and keep the frequency with the pair, since the numbers shift with frequency.
How to use this quiz
You get 20 seconds per question and one attempt at each answer, so read the frequency first, then the material, then the number type. Most misses in this set come from pairing the right material with the wrong frequency or the wrong number of the pair. Slow down on those two words and the table answers itself. Then retake the quiz.
Choose how you want to play
Answer explanations
Worked through the quiz? Here is why each correct answer is correct: the concept behind it, in plain terms.
- Which of these food components does NOT show low dielectric loss at microwave frequencies?
Correct answer: Free water. Free water — with freely rotating dipoles and dissolved ions — absorbs microwave energy strongly, so it shows high, not low, dielectric loss. Bound water, protein and starch are the low-loss components here. - Which of these does NOT show high dielectric loss at microwave frequencies?
Correct answer: Bound water. Bound water's molecules are locked to surfaces and can't rotate with the alternating field, so bound water shows low — not high — dielectric loss at microwave frequencies, unlike free water, monosaccharides and ions. - PET packaging film has what dielectric constant at 1 kHz?
Correct answer: 3.5. PET packaging film has a dielectric constant of about 3.5 at 1 kHz — the standard published value for this packaging polymer. - How much energy does PET dissipate — what is its dielectric loss factor at 1 kHz?
Correct answer: 0.01. PET dissipates only a little energy at 1 kHz: its dielectric loss factor is 0.01. - Crystallized PET (CPET), used for ovenable trays, has what dielectric constant at 1 kHz?
Correct answer: 3.3. Crystallized PET used for ovenable trays has a slightly lower dielectric constant — about 3.3 at 1 kHz. - For ovenable CPET trays, what is the dielectric loss factor at 1 kHz?
Correct answer: 0.002. For ovenable CPET trays, the dielectric loss factor at 1 kHz is only 0.002, so the tray stays nearly transparent to the microwave field while the food heats. - Polyethylene film has what dielectric constant at 3 GHz?
Correct answer: 2.25. Polyethylene film has a dielectric constant of 2.25 at 3 GHz — the classic textbook value (PE ~2.25 at microwave frequencies). - Plexiglass (acrylic) has what dielectric constant at 3 GHz?
Correct answer: 2.6. Plexiglass (acrylic) has a dielectric constant of about 2.6 at 3 GHz. - Teflon (PTFE) has what dielectric constant at 3 GHz?
Correct answer: 2.1. Teflon (PTFE) has a dielectric constant of 2.1 at 3 GHz, one of the lowest among common packaging materials. - Borosilicate glass (96% SiO₂) has what dielectric constant at 3 GHz?
Correct answer: 3.84. Borosilicate glass (96% SiO2) has a dielectric constant of about 3.84 at 3 GHz. - At 3 GHz, how lossy is polyethylene — what is its dielectric loss factor?
Correct answer: 0.0026. At 3 GHz, polyethylene's dielectric loss factor is only 0.0026 — it barely absorbs microwaves, which is why PE film stays cool while the food inside heats. - Plexiglass has what dielectric loss factor at 3 GHz?
Correct answer: 0.015. Plexiglass (acrylic) dissipates a bit more field energy than polyethylene, with a dielectric loss factor of 0.015 at 3 GHz. - Teflon barely absorbs microwaves. What is its dielectric loss factor at 3 GHz?
Correct answer: 0.0003. Teflon barely absorbs microwaves at all — its dielectric loss factor at 3 GHz is a tiny 0.0003, one of the lowest values among packaging materials. - Borosilicate glass (96% SiO₂) dissipates how much energy at 3 GHz — what is its dielectric loss factor?
Correct answer: 0.0026. Borosilicate glass dissipates how little energy at 3 GHz? Its loss factor is 0.0026 — low enough that glass dishes stay nearly microwave-transparent while the food heats. - At 1 GHz, what dielectric constant does royal grey packaging paper have?
Correct answer: 3.0. At 1 GHz, royal grey packaging paper has a dielectric constant of 3.0. - At 3 GHz, what is the dielectric constant of royal grey paper?
Correct answer: 2.94. At 3 GHz the paper's dielectric constant drops slightly to 2.94 — dielectric constant typically falls as frequency rises. - What is the dielectric loss factor of royal grey paper at 1 GHz?
Correct answer: 0.216. The dielectric loss factor of royal grey paper at 1 GHz is 0.216. - At 3 GHz, what is the dielectric loss factor of royal grey paper?
Correct answer: 0.235. At 3 GHz, royal grey paper's dielectric loss factor is 0.235 — the paper absorbs noticeably more energy at the higher frequency. - What is the medium frequency range for dielectric heating?
Correct answer: 3–30 MHz. The medium frequency range for dielectric (RF) heating spans 3–30 MHz — the HF radio band where most industrial RF heaters operate. - What is the high frequency range for dielectric heating?
Correct answer: 30–300 MHz. The high frequency range for dielectric heating spans 30–300 MHz, sitting above the 3–30 MHz medium band.