Login Register

Access the GIFSQ Portal

Select your user type to log in or register a new account.

Student Portal

Access your food safety courses and exams.

Instructor Portal

Manage courses, view student submissions, and grade quizzes.

Company Portal

Manage corporate setup, view employee logs, and access QA services.

ISO 22000:2018 Implementation and Certification Quiz

GIFSQ ID: ART-2242

Test your knowledge with this free 20-question ISO 22000:2018 quiz on implementation, certification and internal audit.

What this quiz covers

ISO 22000:2018 is the international standard for food safety management systems, and this quiz tests it the way it is actually built, run and certified. The questions follow the standard clause by clause: context and scope in Clause 4, leadership and the food safety policy in Clause 5, planning, objectives and change in Clause 6, support, competence and awareness in Clause 7, operation and hazard control in Clause 8, performance evaluation and management review in Clause 9, and improvement and updating in Clause 10.

A second group covers the certification route itself: the gap analysis that starts implementation, the internal audit and management review that must be finished before a certification body arrives, the Stage 1 and Stage 2 audits, the three-year certificate cycle with annual surveillance, and recertification. A third group covers internal audit practice and the difference between ISO 22000 and the FSSC 22000 scheme, including Version 7, published in May 2026, with its ISO 22002-x:2025 prerequisite programme series and its transition from Version 6.

Use this quiz to check readiness before an internal audit, a Stage 1 audit or an FSSC 22000 upgrade audit, or to test a team that is building a food safety management system for the first time. Every question has four options, one correct answer and a short explanation that names the clause or scheme rule behind the answer, so a wrong answer still teaches the requirement. The questions and answers are free to read, with no sign-up.

Three angles in one quiz: the system, the audit and the certificate

The system questions follow Clauses 4 to 10 in order, the audit questions test the internal audit and management review that must be finished before certification, and the scheme questions test how ISO 22000 and FSSC 22000 fit together.

How to use this quiz

Take the quiz cold first, then read the explanations below the player. Each answer gives the reason behind the key, with the clauses, the scheme rules and the audit steps a food safety management student is expected to know.

ISO 22000:2018 Implementation and Certification Quiz
Uncategorized

Choose how you want to play

Sound effects
🔈 Volume
Show explanations
🔊 Auto-read every question
Reading speed

Note: the player shuffles the questions and the answer options on every attempt, so the numbers in the player will not match the numbers in the explanations below. Match each answer by its wording.

Answer explanations

Worked through the quiz? Here is why each correct answer is correct: the concept behind it, in plain terms.

  1. A food business decides to build an ISO 22000:2018 system. What is the first practical step?
    1. Book the Stage 2 certification audit
    2. Compare current food safety practices against the requirements of ISO 22000:2018 to find the gaps (correct answer)
    3. Buy new monitoring equipment
    4. Write the food safety policy and stop there

    Correct answer: Compare current food safety practices against the requirements of ISO 22000:2018 to find the gaps. A gap analysis compares what the business already does with what ISO 22000:2018 requires, so the team knows exactly what is missing before building anything. It prevents wasted work on documents and controls that already exist and shows where the real effort must go.
  2. Under ISO 22000:2018 Clause 5.2, which commitments must the food safety policy contain?
    1. A commitment to meet applicable food safety requirements, address communication, continually improve the FSMS and ensure competencies (correct answer)
    2. A commitment to the lowest production cost and the fastest output
    3. A commitment to audit every supplier every month
    4. A commitment to zero customer complaints

    Correct answer: A commitment to meet applicable food safety requirements, address communication, continually improve the FSMS and ensure competencies. Clause 5.2 requires the policy to fit the purpose and context of the organization and to commit to meeting applicable food safety requirements, including legal and customer requirements, to internal and external communication, to continual improvement of the FSMS, and to ensuring the competencies the system needs.
  3. What must food safety objectives be under ISO 22000:2018 Clause 6.2?
    1. Written as general good intentions with no measure
    2. Set once and never changed
    3. Consistent with the food safety policy, measurable where practicable, monitored, communicated and updated as appropriate (correct answer)
    4. Known only to top management

    Correct answer: Consistent with the food safety policy, measurable where practicable, monitored, communicated and updated as appropriate. Objectives turn the policy into measurable targets at relevant functions and levels. They must be consistent with the policy, take account of legal, regulatory and customer requirements, be measurable where practicable, monitored, verified, communicated and updated as appropriate.
  4. A plant plans to add a new product line. Under Clause 6.3, what must it consider before the change goes live?
    1. Only the marketing launch date
    2. Only the new product label
    3. Only the cost of the new line
    4. The purpose of the change and its possible consequences, the continued integrity of the FSMS, the resources available, and the allocation of responsibilities (correct answer)

    Correct answer: The purpose of the change and its possible consequences, the continued integrity of the FSMS, the resources available, and the allocation of responsibilities. Clause 6.3 requires changes to the FSMS to be planned and communicated. The organization must consider why the change is made, what it could affect, whether the system stays intact, what resources it needs, and who is responsible, so a commercial decision cannot bypass food safety.
  5. Under ISO 22000:2018 Clause 7.3, what must every relevant worker be aware of?
    1. Only the production schedule
    2. The food safety policy, the objectives that relate to their work, how their work contributes to an effective FSMS, and the implications of not following the requirements (correct answer)
    3. Only the location of the fire exits
    4. Only the price of the products they make

    Correct answer: The food safety policy, the objectives that relate to their work, how their work contributes to an effective FSMS, and the implications of not following the requirements. Awareness is not a training certificate. Every person whose work affects food safety must know the policy, the objectives behind their tasks, how their own work keeps the system effective, and what happens if the requirements are not followed.
  6. In ISO 22000:2018, which comes first: establishing the prerequisite programmes (PRPs) or carrying out the hazard analysis?
    1. PRPs are established first, and the hazard analysis builds on them (correct answer)
    2. Both are done at the same time with no order
    3. Neither is needed before the certification audit
    4. The hazard analysis comes first; PRPs are added later

    Correct answer: PRPs are established first, and the hazard analysis builds on them. PRPs are the basic conditions and activities, such as hygiene, maintenance and pest control, that keep the plant in a hygienic state. ISO 22000 places them in Clause 8.2, before hazard control in Clause 8.5, because the hazard analysis assumes those foundations are already in place.
  7. When the food safety team describes the intended use of a product, what must it consider?
    1. Only the product name
    2. Only the price the customer will pay
    3. How the product is reasonably expected to be handled, the foreseeable ways it might be mishandled, and any consumer groups especially vulnerable to particular hazards (correct answer)
    4. Only the colour of the packaging

    Correct answer: How the product is reasonably expected to be handled, the foreseeable ways it might be mishandled, and any consumer groups especially vulnerable to particular hazards. Intended use shapes the hazard analysis. The team must describe how the product will reasonably be handled and misused, and identify vulnerable consumers such as infants, the elderly, hospital patients or people with allergies, because the controls must protect them too.
  8. How is the acceptable level of a food safety hazard in the end product determined?
    1. By copying the level used for a different product
    2. By choosing zero for every hazard
    3. By guessing the lowest level the laboratory can detect
    4. Wherever possible, taking into account legal and customer requirements, the intended use and other relevant information (correct answer)

    Correct answer: Wherever possible, taking into account legal and customer requirements, the intended use and other relevant information. The acceptable level is the target the control measures must reach. Clause 8.5.2.2.3 requires it to be determined wherever possible, using legal and regulatory limits, customer requirements, the intended use and other relevant information, with the source and reasoning retained.
  9. When the food safety team categorises a control measure as a CCP or an OPRP, what must its systematic assessment cover?
    1. Only the cost of the control measure
    2. The likelihood of the measure failing, the severity of the consequences if it fails, and the feasibility of setting limits, monitoring for failure and applying timely corrections (correct answer)
    3. Only the name of the supplier
    4. Only the age of the equipment

    Correct answer: The likelihood of the measure failing, the severity of the consequences if it fails, and the feasibility of setting limits, monitoring for failure and applying timely corrections. Clause 8.5.2.4 requires a systematic approach. For each control measure the team assesses how likely it is to fail, how severe the consequences would be, and whether measurable limits, monitoring and timely correction are feasible. That assessment decides whether the measure is managed at a CCP or as an OPRP.
  10. Monitoring equipment is found to be out of calibration. What must the organization do under Clause 8.7?
    1. Throw away all records from the last year
    2. Stop all production permanently
    3. Keep using it and note the fault at the next audit
    4. Assess the validity of earlier measurement results and the affected product, take action, and record what was done (correct answer)

    Correct answer: Assess the validity of earlier measurement results and the affected product, take action, and record what was done. Monitoring is only as good as the instrument behind it. Clause 8.7 requires equipment to be calibrated or verified and protected from damage and unauthorised adjustment. If an instrument is found out of specification, earlier results and the affected product must be assessed and the action recorded.
  11. Under Clause 9.1, what must the organization determine about monitoring, measurement, analysis and evaluation?
    1. What needs to be monitored and measured, the methods that give valid results, when monitoring takes place, and when and by whom results are analysed and evaluated (correct answer)
    2. Only the number of staff on each shift
    3. Only the cost of laboratory testing
    4. Only the brand of the measuring instrument

    Correct answer: What needs to be monitored and measured, the methods that give valid results, when monitoring takes place, and when and by whom results are analysed and evaluated. Clause 9.1 turns checking into a plan. The organization must decide what to monitor and measure, which methods give valid results, when monitoring happens, and when and by whom results are analysed and evaluated, so it can judge how well the FSMS performs.
  12. What must come out of a management review under Clause 9.3?
    1. Only a copy of the certificate
    2. Only a list of who attended the meeting
    3. Decisions and actions on opportunities for continual improvement, any need to update or change the FSMS, resource needs, and revisions to the food safety policy and objectives (correct answer)
    4. Only the date of the next review

    Correct answer: Decisions and actions on opportunities for continual improvement, any need to update or change the FSMS, resource needs, and revisions to the food safety policy and objectives. Management review is a decision meeting, not a reading session. Its outputs must include decisions and actions on continual improvement, changes the FSMS needs, the resources required, and revisions to the policy and objectives, with the results retained as documented information.
  13. Under Clause 10.3, how is the food safety management system kept up to date?
    1. It is never updated after certification
    2. The food safety team evaluates it on a planned schedule and decides whether the hazard analysis, the hazard control plan and the PRPs need review, using inputs such as communication, verification results and management review outputs (correct answer)
    3. Only the certification body updates it
    4. Only the policy is updated, nothing else

    Correct answer: The food safety team evaluates it on a planned schedule and decides whether the hazard analysis, the hazard control plan and the PRPs need review, using inputs such as communication, verification results and management review outputs. Top management must ensure the FSMS is continually updated. The food safety team reviews the system on a planned schedule, weighing internal and external communication, verification analysis and management review outputs, and decides whether the hazard analysis, the hazard control plan or the PRPs need review.
  14. Before a certification body will carry out the Stage 1 audit, what must the organization already have done?
    1. Only printed the food safety policy
    2. Only hired a consultant
    3. Nothing; the certification body builds the system
    4. Implemented and operated the FSMS long enough to produce real records, and completed an internal audit and a management review (correct answer)

    Correct answer: Implemented and operated the FSMS long enough to produce real records, and completed an internal audit and a management review. A system cannot be audited on paper alone. Before Stage 1, the organization must have operated the FSMS under its procedures, producing monitoring sheets, calibration evidence and traceability records, and must have completed a full internal audit cycle and a management review to prove the system works.
  15. Can an organization claim GFSI recognition by holding ISO 22000 certification alone?
    1. No, ISO 22000 is a standard, not a scheme; GFSI recognition comes through a benchmarked scheme such as FSSC 22000, which is built on ISO 22000 (correct answer)
    2. Yes, if the certificate is less than a year old
    3. No, because GFSI does not recognise any food safety certification
    4. Yes, ISO 22000 is itself a GFSI-benchmarked scheme

    Correct answer: No, ISO 22000 is a standard, not a scheme; GFSI recognition comes through a benchmarked scheme such as FSSC 22000, which is built on ISO 22000. ISO 22000 is an international standard that any organization in the food chain can be certified against. GFSI benchmarks certification schemes, not standards. FSSC 22000 is the GFSI-recognized scheme built on ISO 22000 plus sector PRPs and additional requirements, so a site needing GFSI recognition certifies to FSSC 22000.
  16. What is the biggest technical change in FSSC 22000 Version 7, published in May 2026?
    1. The scheme now covers only food manufacturing
    2. The scheme no longer requires ISO 22000
    3. Adoption of the revised ISO 22002-x:2025 prerequisite programme series, with the common requirements in ISO 22002-100 (correct answer)
    4. The scheme no longer requires audits

    Correct answer: Adoption of the revised ISO 22002-x:2025 prerequisite programme series, with the common requirements in ISO 22002-100. Version 7 moves the scheme to the ISO 22002-x:2025 PRP series, published in July 2025, with common requirements in the new ISO 22002-100. It also aligns with the GFSI Benchmarking Requirements 2024 and strengthens requirements on food fraud, food defence, allergens, environmental monitoring and food safety culture.
  17. Under FSSC 22000, which PRP standard applies to a company that manufactures food packaging?
    1. ISO 22002-2, catering
    2. ISO 22002-4, food packaging manufacturing (correct answer)
    3. ISO 22002-6, feed and animal food production
    4. ISO 22002-1, food manufacturing

    Correct answer: ISO 22002-4, food packaging manufacturing. FSSC 22000 pairs ISO 22000 with the sector PRP standard that fits the operation. Food manufacturing uses ISO 22002-1, catering uses ISO 22002-2, farming uses ISO 22002-3, and food packaging manufacturing uses ISO 22002-4. The 2025 series also added retail and wholesale as Part 7.
  18. Which standard sets the requirements for bodies that audit and certify food safety management systems?
    1. ISO 22003-1:2022, which supplements ISO/IEC 17021-1 with food-specific requirements (correct answer)
    2. ISO 9001:2015
    3. ISO 14001:2015
    4. ISO 22002-1:2025

    Correct answer: ISO 22003-1:2022, which supplements ISO/IEC 17021-1 with food-specific requirements. ISO/IEC 17021-1 sets the general rules for bodies certifying management systems. ISO 22003-1:2022 adds the food-specific layer: food chain categories, auditor competence for each category, minimum audit duration, multi-site sampling and unannounced audits. Accreditation bodies assess certification bodies against both.
  19. What did ISO 22000:2018/Amd 1:2024, the climate action amendment, change?
    1. It requires the organization to determine whether climate change is a relevant issue (Clause 4.1) and notes that interested parties can have climate-related requirements (Clause 4.2) (correct answer)
    2. It changed the number of clauses from 10 to 12
    3. It made certification valid for five years
    4. It removed the requirement for a food safety policy

    Correct answer: It requires the organization to determine whether climate change is a relevant issue (Clause 4.1) and notes that interested parties can have climate-related requirements (Clause 4.2). Published in February 2024, Amendment 1 adds one sentence to Clause 4.1: the organization shall determine whether climate change is a relevant issue. A note in Clause 4.2 adds that relevant interested parties can have requirements related to climate change. Auditors now check for that decision.
  20. ISO 22000:2018 uses the same high-level structure as ISO 9001 and ISO 14001. What does that shared structure make easier?
    1. Certifying without a certification body
    2. Skipping the hazard analysis
    3. Running one integrated management system, with common clauses for context, leadership, planning, support, performance evaluation and improvement (correct answer)
    4. Avoiding internal audits

    Correct answer: Running one integrated management system, with common clauses for context, leadership, planning, support, performance evaluation and improvement. The Annex SL high-level structure gives all ISO management system standards the same 10-clause skeleton and core text. A business can therefore run quality, environment and food safety as one integrated system, sharing its context analysis, leadership, planning, support and review routines instead of running three separate systems.

Frequently asked questions

What is ISO 22000:2018?

ISO 22000:2018 is the international standard for food safety management systems (FSMS): requirements for any organization in the food chain. It combines interactive communication, system management, prerequisite programmes and the HACCP principles, and it follows the Annex SL high-level structure shared with ISO 9001 and ISO 14001. Any organization in the food chain can be certified against it.

What is the difference between ISO 22000 and FSSC 22000?

ISO 22000 is a standard; FSSC 22000 is a certification scheme built on it. FSSC 22000 adds sector-specific PRPs from the ISO 22002-x series and FSSC additional requirements covering food fraud, food defence, allergens, environmental monitoring, food safety culture and more. FSSC 22000 is recognized by the Global Food Safety Initiative (GFSI); ISO 22000 alone is not a GFSI-benchmarked scheme.

How long is an ISO 22000 certificate valid?

Three years, maintained by annual surveillance audits, with a recertification audit before the certificate expires. The first surveillance audit takes place within twelve months of the certification decision.

How long does it take to implement ISO 22000?

The standard sets no fixed time. It depends on the size and complexity of the operation and how much already exists. The system must be operated long enough to produce real records, and an internal audit and a management review must be completed before the certification audit.

What is FSSC 22000 Version 7?

The current edition of the FSSC 22000 scheme, published on 1 May 2026. It adopts the ISO 22002-x:2025 PRP series and aligns with the GFSI Benchmarking Requirements 2024. Audits against Version 6 are permitted until 30 April 2027, and upgrade audits to Version 7 run from 1 May 2027 to 30 April 2028.

Is ISO 22000 certification mandatory?

No. ISO 22000 is voluntary. A business chooses certification because customers, retailers or regulators ask for it, or because it wants independent proof that its food safety management system works.