Login Register

Access the GIFSQ Portal

Select your user type to log in or register a new account.

Student Portal

Access your food safety courses and exams.

Instructor Portal

Manage courses, view student submissions, and grade quizzes.

Company Portal

Manage corporate setup, view employee logs, and access QA services.

Irradiation – Part 2

GIFSQ ID: ART-0812

What this quiz covers

Irradiation treats food with energy instead of heat, and this quiz tests the second half of the irradiation set: the sources, the dose words, and the doses that kill microbes. You will meet cobalt-60 and cesium-137, the rad, radappertization, radurization, and radicidation, plus the doses for spices, moulds, yeasts, and viruses.

Twenty questions cover gamma-ray sources; the rad as the classic dose unit; radappertization as sterilization and radurization and radicidation as pasteurization; the 10 to 30 kGy dose for spices; moulds needing the highest UV dose; beta rays as streams of electrons and cathode rays as their twin; penetration of X, beta, and gamma rays, cathode rays as the least penetrating, and gamma rays effective to about 20 cm; X-rays and gamma rays for commercial sterilization; cathode rays as directional and effective to about 5 cm; what a dose’s killing power depends on; and the killing doses for viruses, yeasts, and moulds.

Concepts you will need

Three dose words carry this set, and they differ by intent, not by magic: radurization pasteurizes at a low dose, radicidation targets pathogens, and radappertization sterilizes at a high dose. Learn the three in that order, low to high, and the dose questions line up behind them.

How to use this quiz

You get 20 seconds per question and one attempt at each answer, so ask what the treatment is trying to do before you pick a dose word. Pasteurize, target a pathogen, or sterilize: the intent names the term. If you miss a dose number, note which microbe it is for: viruses need the most, moulds the least of the three. Then retake the quiz. When a dose question appears, name the microbe first: viruses need the highest dose, moulds sit in the middle, and bacteria need the least.

Irradiation – Part 2
Uncategorized

Choose how you want to play

Sound effects
🔈 Volume
Show explanations
🔊 Auto-read every question
Reading speed

Answer explanations

Worked through the quiz? Here is why each correct answer is correct: the concept behind it, in plain terms.

  1. A food irradiator needs a reliable gamma emitter. Which are the sources of gamma rays?
    1. Cobalt-60
    2. Phosphorus-32
    3. Cesium-137
    4. Cobalt-60 and cesium-137 (correct answer)

    Correct answer: Cobalt-60 and cesium-137. Practical gamma irradiators run on cobalt-60 or cesium-137 — the two long-lived isotopes that emit penetrating gamma rays. Phosphorus-32 is a beta emitter, so it doesn't belong among gamma sources.
  2. An irradiator operator logs the absorbed dose in the classic unit. What is the unit of radiation dose?
    1. Rad (correct answer)
    2. Roentgen
    3. Rep
    4. Megarep

    Correct answer: Rad. The classic unit of absorbed radiation dose is the rad — the energy absorbed per gram of irradiated material (100 rad = 1 gray, the modern SI unit). An operator logging in the old system records rad.
  3. A very high radiation dose sterilizes food completely, like canning without heat. What does radappertization mean?
    1. Radiation sterilization (correct answer)
    2. Radiation pasteurization
    3. Radiation ionization
    4. Radiation drying

    Correct answer: Radiation sterilization. Radappertization is the very-high-dose treatment that destroys essentially all microorganisms — sterilization by radiation, the cold equivalent of canning.
  4. A moderate radiation dose extends shelf life without sterilizing the food. What does radurization mean?
    1. Radiation sterilization
    2. Radiation pasteurization (correct answer)
    3. Radiation ionization
    4. Radiation drying

    Correct answer: Radiation pasteurization. Radurization uses a moderate dose that knocks down spoilage and pathogenic microbes enough to extend shelf life without sterilizing — pasteurization by radiation.
  5. A radiation treatment targets pathogens in poultry without fully sterilizing it. What is radicidation?
    1. Radiation sterilization
    2. Radiation pasteurization (correct answer)
    3. Radiation ionization
    4. Radiation drying

    Correct answer: Radiation pasteurization. Radicidation is the dose tuned to destroy non-spore-forming pathogens such as Salmonella in poultry — a targeted pasteurization by radiation, not full sterilization.
  6. Spices carry heavy microbial loads and need a strong dose to decontaminate. What is the radiation dose for spices?
    1. 1 kGy
    2. 10–30 kGy (correct answer)
    3. 50–70 kGy
    4. Above 90 kGy

    Correct answer: 10–30 kGy. Spices carry enormous microbial loads but are used in tiny amounts, so they're treated with high doses of 10–30 kGy (up to 30 kGy permitted) to decontaminate them without wrecking their volatile flavours.
  7. UV lamps sanitize a packing line, but some microbes shrug off the light. The UV radiation dose is highest for which group?
    1. Gram-negative bacteria
    2. Gram-positive bacteria
    3. Moulds (correct answer)
    4. Yeasts

    Correct answer: Moulds. Moulds — with tough spores and protective pigments — resist UV the most, so they need the highest UV dose. Gram-negative bacteria need the least.
  8. Beta rays behave like particles, not like light. What are beta rays?
    1. Electromagnetic waves
    2. Rays produced from cobalt and cesium
    3. Streams of electrons (correct answer)
    4. Streams of protons

    Correct answer: Streams of electrons. Beta rays are high-speed electrons ejected from atomic nuclei — streams of electrons, not electromagnetic waves like gamma rays.
  9. Cathode rays stream from an old vacuum tube as charged particles. What are they similar to?
    1. X-rays
    2. Gamma rays
    3. Beta rays (correct answer)
    4. Ultraviolet rays

    Correct answer: Beta rays. Cathode rays are streams of electrons streaming from a heated cathode in a vacuum tube, so they behave like beta rays.
  10. A label notes the food received a low, gentle dose of ionizing radiation. Which term describes this treatment?
    1. Radappertization
    2. Radurization (correct answer)
    3. Radicidation
    4. Picowaving

    Correct answer: Radurization. A low, gentle dose that improves keeping quality without sterilizing is radurization — radiation pasteurization.
  11. Irradiation works because the rays reach deep into the food. X-, beta-, and gamma rays have what penetration?
    1. Poor
    2. Good (correct answer)
    3. None
    4. Slight

    Correct answer: Good. X-, beta- and gamma rays carry enough energy to pass deep through packaged food — that's exactly why irradiation can treat food in its sealed final pack.
  12. Four rays enter a thick food package, but one barely gets past the surface. Which has the least penetration?
    1. X-rays
    2. Beta rays
    3. Gamma rays
    4. Cathode rays (correct answer)

    Correct answer: Cathode rays. Cathode rays are streams of electrons that matter stops quickly, penetrating only a few centimetres, so among X-rays, beta rays, gamma rays and cathode rays they have the least penetration.
  13. A contract sterilizer irradiates medical and food products. Which rays are used for commercial sterilization?
    1. X-rays
    2. Gamma rays
    3. X-rays and gamma rays (correct answer)
    4. Ultraviolet rays

    Correct answer: X-rays and gamma rays. Commercial sterilization plants use cobalt-60 gamma rays or machine-generated X-rays, since both punch through thick product loads. Ultraviolet light can't reach inside food at all.
  14. Gamma rays are prized for reaching the centre of thick packages. How deep into foods are they effective?
    1. 2 cm
    2. 10 cm
    3. 20 cm (correct answer)
    4. 15 cm

    Correct answer: 20 cm. Gamma rays stay effective to about 20 cm deep in foods, so they reach the centre of thick packages and sterilize throughout.
  15. Electron-beam treatment works only on thin layers of food. How deep into foods are cathode rays effective?
    1. 0.5 cm
    2. 0.05 cm
    3. 5.0 cm (correct answer)
    4. 50.0 cm

    Correct answer: 5.0 cm. Cathode rays only penetrate a short distance — about 5.0 cm in food — so electron-beam treatment is limited to thin layers of product.
  16. An operator aims an electron beam precisely at the product stream. Which statement about cathode rays is true?
    1. They penetrate deeply
    2. They are directional (correct answer)
    3. They penetrate up to 50 cm
    4. They are electromagnetic waves

    Correct answer: They are directional. Cathode rays are electrons fired out of a vacuum tube, so they travel as a beam in one direction. Gamma rays, by contrast, radiate outward in all directions from the isotope source.
  17. The same radiation dose kills microbes in one food but fails in another. What does a dose's bacterial efficacy depend on?
    1. The kind and number of microbes and the food composition (correct answer)
    2. The kind of microbes only
    3. The number of microbes only
    4. The food colour only

    Correct answer: The kind and number of microbes and the food composition. The same dose can succeed or fail because microbial kill depends on which organisms are present, how many there are, and how the food's composition (water, fat, oxygen level) shields or sensitizes them.
  18. Viruses are among the toughest targets for irradiation. What is the optimum dose for killing them?
    1. 1–10 kGy
    2. 10–40 kGy (correct answer)
    3. 0.1–0.4 kGy
    4. Above 40 kGy

    Correct answer: 10–40 kGy. Viruses are tiny targets with little water content, so they need hefty doses — about 10–40 kGy, per the published lethal-dose table (Introduction to Food Irradiation and Medical Sterilization, PMC).
  19. Yeasts sit between bacteria and viruses in radiation resistance. What is the optimum dose for killing yeast?
    1. 4–9 kGy (correct answer)
    2. 10–40 kGy
    3. 0.1–0.4 kGy
    4. Above 40 kGy

    Correct answer: 4–9 kGy. Fermentative yeasts sit between bacteria and viruses in radiation resistance, with optimum killing doses of about 4–9 kGy.
  20. Mould spores make irradiation harder than for bacteria. What is the optimum dose for killing mould?
    1. 1.3–11 kGy (correct answer)
    2. 12–42 kGy
    3. 0.1–0.4 kGy
    4. Above 40 kGy

    Correct answer: 1.3–11 kGy. Mould spores are tougher than bacterial cells but far easier to kill than viruses — roughly 1.3–11 kGy finishes them.