Login Register

Access the GIFSQ Portal

Select your user type to log in or register a new account.

Student Portal

Access your food safety courses and exams.

Instructor Portal

Manage courses, view student submissions, and grade quizzes.

Company Portal

Manage corporate setup, view employee logs, and access QA services.

Heat Transfer – Part 3

GIFSQ ID: ART-0796

What this quiz covers

Heat transfer decides how fast food heats, cools, dries, and stays safe, and this quiz works through the numbers and equipment behind it. The first questions use the Prandtl number, a ratio that compares how thick a fluid acts against how fast heat spreads through it. Water at room temperature sits near 7, and the number falls as water warms, dropping to about 1.75 near boiling, while dry air sits near 0.71. Those values matter because they feed straight into heat transfer calculations for heaters, coolers, and dryers.

The middle questions cover the equipment: counter-flow, parallel-flow, and cross-flow exchangers, the surface properties that govern radiation, and the overall heat transfer coefficients of six dryer types, from the slow conduction-only vacuum shelf dryer at 5 to 6 W/(m2·K) to the steam-heated vacuum dryer at 1135 to 1700 W/(m2·K). Knowing which dryer transfers heat fastest, and why, is what lets a plant pick the right dryer for a heat-sensitive product instead of the cheapest one. The last questions turn to milk: the clot-on-boiling test, the alcohol test, the phosphatase test, and the alcohol index, four quick checks that tell a dairy whether milk will survive heating without curdling.

How the numbers fit together

Keep two ideas separate as you work: the Prandtl number describes the fluid, while the overall coefficient describes the equipment. A fluid with a low Prandtl number carries heat easily, and a dryer with a high coefficient moves heat fast, but neither number alone picks the process. Match the fluid, the equipment, and the product’s heat tolerance, and the plant runs steady.

How to use this quiz

You get 20 seconds per question and one attempt at each answer, so read the units before the numbers: a Prandtl value and a dryer coefficient look alike on screen but mean different things. A wrong answer usually means two close numbers swapped, so re-pair the value with its temperature or its dryer before retaking, then read the explanations below to fix the pairing in your head.

Heat Transfer – Part 3
Uncategorized

Choose how you want to play

Sound effects
🔈 Volume
Show explanations
🔊 Auto-read every question
Reading speed

Answer explanations

Worked through the quiz? Here is why each correct answer is correct: the concept behind it, in plain terms.

  1. At 20 °C, what value does water’s Prandtl number take?
    Correct answer: 7.0. Water at 20 °C has a Prandtl number of about 7.0, because its viscosity is still high relative to its thermal conductivity at room temperature.
  2. At 25 °C, what value does water’s Prandtl number take?
    Correct answer: 6.1. Warming water to 25 °C thins it, so its Prandtl number drops to about 6.1.
  3. At 30 °C, what value does water’s Prandtl number take?
    Correct answer: 5.4. At 30 °C water is thinner still, and its Prandtl number falls to about 5.4.
  4. Near boiling, water’s viscosity collapses. What does its Prandtl number sink to?
    Correct answer: 1.75. Near boiling, water flows almost freely, so its Prandtl number sinks to about 1.75.
  5. Gases have Prandtl numbers well under 1. What is dry air’s?
    Correct answer: 0.71. Dry air has a Prandtl number of about 0.71, which is typical for gases.
  6. In a steam boiler, the breeching refers to which of these?
    Correct answer: Metal. The breeching is the metal duct that carries flue gas from the boiler to the chimney.
  7. How do the two fluid streams move relative to each other in a counter-flow heat exchanger?
    Correct answer: Opposite. In counter-flow, the hot and cold streams travel in opposite directions, which keeps a steady temperature gap along the whole exchanger.
  8. In a co-current (parallel-flow) exchanger, in which direction do the two streams move?
    Correct answer: Same. In parallel flow, both streams enter at the same end and travel in the same direction.
  9. In a cross-flow exchanger — like a car radiator — the two fluid streams meet at what angle?
    Correct answer: Perpendicular. In cross-flow, the two streams meet at right angles to each other, as air does against coolant tubes in a radiator.
  10. Which of these is NOT a surface radiation property?
    Correct answer: Thermal conductivity. Emissivity, reflectivity, and absorptivity describe how a surface handles radiation, while thermal conductivity describes conduction through a material.
  11. A vacuum shelf dryer heats food by conduction from shelves, with no air to help. Roughly what is its overall heat transfer coefficient in W/(m²·K)?
    Correct answer: 5–6. With conduction only and no air movement, a vacuum shelf dryer transfers heat slowly, at about 5 to 6 W/(m2·K).
  12. An indirect rotary dryer tumbles product over heated surfaces. About what is its overall coefficient in W/(m²·K)?
    Correct answer: 11–57. Tumbling keeps fresh product against the heated wall, lifting the coefficient to about 11 to 57 W/(m2·K).
  13. A jacketed trough dryer heats through its walls. About what is its overall coefficient in W/(m²·K)?
    Correct answer: 11–85. Heating through the jacketed walls gives about 11 to 85 W/(m2·K).
  14. A rotary vacuum dryer combines tumbling with vacuum. What does its overall coefficient in W/(m²·K) reach?
    Correct answer: 28–284. Tumbling plus vacuum pulls the coefficient up to about 28 to 284 W/(m2·K).
  15. An agitated tray dryer stirs the product as it dries. Around what is its overall coefficient in W/(m²·K)?
    Correct answer: 28–340. Stirring keeps product moving against heated surfaces, giving about 28 to 340 W/(m2·K).
  16. A steam-heated vacuum dryer boils off moisture under reduced pressure. Roughly what is its overall heat transfer coefficient in W/(m²·K)?
    Correct answer: 1135–1700. Condensing steam gives up a lot of heat very fast, so this dryer reaches about 1135 to 1700 W/(m2·K), far above the others.
  17. A quick boiling test reveals whether milk will survive processing heat. The heat stability of milk is judged with which test?
    Correct answer: Clot-on-boiling test. If milk clots when boiled, it will not stand up to processing heat, so the clot-on-boiling test is the direct check.
  18. A few drops of alcohol curdle a milk sample in a test tube. The alcohol test on raw milk checks its stability during which treatment?
    Correct answer: Heating. The alcohol test predicts whether milk will stay stable when heated, which is why it is run on milk headed for heat processing.
  19. What phosphatase test result indicates milk of good keeping quality?
    Correct answer: Negative. A negative phosphatase test means the enzyme was destroyed by proper pasteurisation, which points to milk of good keeping quality.
  20. A heat-stable milk shows what alcohol index?
    Correct answer: 7. In the quiz’s table, a heat-stable milk shows an alcohol index of 7.