Login Register

Access the GIFSQ Portal

Select your user type to log in or register a new account.

Student Portal

Access your food safety courses and exams.

Instructor Portal

Manage courses, view student submissions, and grade quizzes.

Company Portal

Manage corporate setup, view employee logs, and access QA services.

Food Technology Loksewa – Proximate Analysis

GIFSQ ID: ART-1196

Test your knowledge with this free 20-question Proximate Analysis quiz from Food Analysis & Laboratory — part of…

What this quiz covers

This Loksewa set opens the whole proximate analysis series, and it is the one to master first, because every later set assumes it. Proximate analysis splits a food into six bulk fractions: moisture, ash, crude protein, crude fat, crude fibre, and carbohydrate by difference. You will meet the Weende scheme that started it all in the 1860s, the meaning of the word crude, and the two bases every report uses, as-is and dry-weight. The arithmetic is simple but unforgiving: carbohydrate is never measured, it is what is left after the other five are subtracted from 100.

The second half of the set turns the definitions into numbers you can work with. There is an Atwater energy calculation, a carbohydrate-by-difference sum, a total-solids conversion, and a wheat-flour report to judge for plausibility. Around those sit the laboratory habits that keep the numbers honest: representative sampling before anything else, duplicate moisture readings that must agree before they are reported, and the reminder that carbohydrate by difference collects the errors of all five measured fractions.

Carbohydrate by difference: the figure that is never measured

Carbohydrate by difference is the one fraction in the set that no instrument ever touches. The laboratory measures moisture, ash, protein, fat and fibre, adds them, and subtracts the total from 100. That makes it a mirror of the other five determinations: if any one of them is off, the carbohydrate figure absorbs the error. It is also why a complete report must always add up: a wheat-flour report reading 12 percent moisture, 11 percent protein, 1.5 percent fat, 0.6 percent ash, 0.8 percent fibre and about 74 percent carbohydrate sums to very nearly 100, and that mass balance is the first check on any proximate report.

How to use this quiz

Take the quiz cold first, then read the explanations below the player. Each answer gives the reason behind the key, with the numbers and definitions a food technologist is expected to know by heart.

Food Technology Loksewa – Proximate Analysis
Uncategorized

Choose how you want to play

Sound effects
🔈 Volume
Show explanations
🔊 Auto-read every question
Reading speed

Note: the player shuffles the questions and the answer options on every attempt, so the numbers in the player will not match the numbers in the explanations below. Match each answer by its wording.

Answer explanations

Worked through the quiz? Here is why each correct answer is correct: the concept behind it, in plain terms.

  1. In proximate analysis of foods, which set of components is determined?
    1. pH, titratable acidity, water activity, refractive index, and colour
    2. Moisture, ash, crude protein, crude fat, crude fibre, and carbohydrate by difference (correct answer)
    3. Moisture, vitamins, minerals, amino acids, fatty acids, and pigments
    4. Total plate count, coliform count, yeast and mould count, and salt content

    Correct answer: Moisture, ash, crude protein, crude fat, crude fibre, and carbohydrate by difference. Proximate analysis determines the six bulk fractions: moisture, ash, crude protein, crude fat, crude fibre, and carbohydrate by difference (AOAC Official Methods of Analysis; Pearson's Composition and Analysis of Foods). Vitamins, amino acids, pigments and microbial counts are measured by separate, specific methods , they are not part of the proximate scheme.
  2. Carbohydrate in a proximate analysis report is obtained by:
    1. Direct extraction with 80% ethanol
    2. Calculation by difference: 100 minus the sum of moisture, ash, protein, fat, and fibre (correct answer)
    3. Enzymatic hydrolysis followed by HPLC
    4. The Lane–Eynon titration

    Correct answer: Calculation by difference: 100 minus the sum of moisture, ash, protein, fat, and fibre. Carbohydrate in a proximate report is calculated by difference: 100 minus the sum of moisture, ash, protein, fat and fibre percentages. Ethanol extraction, enzymatic hydrolysis with HPLC and the Lane–Eynon titration are direct methods for specific sugars, not the proximate convention.
  3. A sample shows 12% moisture, 3% ash, 10% crude protein, 6% crude fat, and 4% crude fibre. Its carbohydrate by difference is:
    1. 55%
    2. 65% (correct answer)
    3. 35%
    4. 75%

    Correct answer: 65%. The five measured fractions total 12 + 3 + 10 + 6 + 4 = 35%, so carbohydrate by difference is 100 − 35 = 65%.
  4. The internationally recognised body whose official methods govern proximate analysis is:
    1. AOAC International (correct answer)
    2. The Codex Committee on Spices
    3. The International Dairy Federation only
    4. The World Health Organization

    Correct answer: AOAC International. AOAC International publishes the official methods that govern proximate analysis (AOAC Official Methods of Analysis, 21st ed., 2019). The Codex Committee on Spices and the International Dairy Federation cover narrower scopes, and WHO is a health agency, not a methods body.
  5. Using the Atwater factors, the energy value of a food containing 10 g protein, 5 g fat, and 20 g carbohydrate per 100 g is:
    1. 210 kcal
    2. 165 kcal (correct answer)
    3. 95 kcal
    4. 125 kcal

    Correct answer: 165 kcal. Using the Atwater factors (4 kcal/g protein, 9 kcal/g fat, 4 kcal/g carbohydrate; FAO Food and Nutrition Paper 77), the energy is 10×4 + 5×9 + 20×4 = 40 + 45 + 80 = 165 kcal per 100 g.
  6. Crude protein in proximate analysis is calculated from estimated nitrogen by multiplying with:
    1. 6.25 (correct answer)
    2. 9.0
    3. 1.25
    4. 4.0

    Correct answer: 6.25. Crude protein is estimated nitrogen multiplied by 6.25, the factor assuming protein contains about 16% nitrogen (AOAC 981.10). The other figures are not nitrogen-to-protein factors.
  7. The word 'crude' in crude protein and crude fat indicates that:
    1. No chemicals are used
    2. The analysis is done on raw foods only
    3. The fractions include non-protein nitrogen and co-extracted non-fat material respectively, so they are approximate (correct answer)
    4. The results are always wrong

    Correct answer: The fractions include non-protein nitrogen and co-extracted non-fat material respectively, so they are approximate. 'Crude' signals that the fractions are approximate: Kjeldahl nitrogen includes non-protein nitrogen, and ether extract co-extracts non-fat material such as pigments and waxes. It does not mean no chemicals were used, that the food must be raw, or that the results are worthless.
  8. In the classical Weende scheme, nitrogen-free extract (NFE) represents:
    1. The ash alkalinity
    2. Free fatty acids
    3. Total dietary fibre
    4. 100 minus the sum of moisture, ash, crude protein, ether extract, and crude fibre (correct answer)

    Correct answer: 100 minus the sum of moisture, ash, crude protein, ether extract, and crude fibre. In the classical Weende scheme, nitrogen-free extract (NFE) is 100 minus the sum of moisture, ash, crude protein, ether extract and crude fibre , essentially the soluble-carbohydrate remainder (Henneberg & Stohmann, 1860s; Pearson's).
  9. Total solids (dry matter) of a food are obtained from moisture content by:
    1. Dividing protein by fat
    2. Adding fibre to carbohydrate
    3. Subtracting the moisture percentage from 100 (correct answer)
    4. Multiplying moisture by the ash content

    Correct answer: Subtracting the moisture percentage from 100. Total solids (dry matter) = 100 − moisture percentage. The other operations , dividing protein by fat, adding fibre to carbohydrate, multiplying by ash , have no analytical meaning.
  10. Ether extract in a proximate analysis report is another name for:
    1. Crude fibre
    2. Crude fat (correct answer)
    3. Nitrogen-free extract
    4. Total ash

    Correct answer: Crude fat. Ether extract is another name for crude fat: the material removed by extraction with diethyl or petroleum ether (AOAC 920.39). It is not fibre, not NFE and not ash.
  11. Which of the following is NOT determined by proximate analysis?
    1. Ash
    2. Moisture
    3. Crude protein
    4. The individual amino acid profile (correct answer)

    Correct answer: The individual amino acid profile. Proximate analysis gives only the six bulk fractions, so an individual amino acid profile is beyond its scope , that needs amino-acid chromatography. Ash, moisture and crude protein are all genuine proximate fractions.
  12. The Weende system of proximate analysis was originally developed for:
    1. Animal feeding stuffs (correct answer)
    2. Cosmetic creams
    3. Drinking water
    4. Pharmaceutical tablets

    Correct answer: Animal feeding stuffs. The Weende system was developed at the Weende agricultural experiment station in Germany in the 1860s by Henneberg and Stohmann for the analysis of animal feeding stuffs. It was never designed for cosmetics, drinking water or pharmaceuticals.
  13. Results of proximate analysis are commonly reported on which two bases?
    1. Acid basis and alkaline basis
    2. Molar basis and normal basis
    3. As-is (wet) basis and dry-weight basis (correct answer)
    4. Fresh basis and frozen basis

    Correct answer: As-is (wet) basis and dry-weight basis. Proximate results are reported on an as-is (wet, as-received) basis and on a dry-weight basis so products of different moisture content can be compared. Acid/alkaline and molar/normal bases are concepts from other kinds of analysis.
  14. Before proximate analysis, the laboratory sample must be:
    1. Dissolved completely in water
    2. Stored at room temperature for a week
    3. Heated to 200 °C
    4. Made representative by proper sampling, then ground and mixed to uniformity (correct answer)

    Correct answer: Made representative by proper sampling, then ground and mixed to uniformity. The laboratory sample must first be made representative by proper sampling, then ground and mixed to uniformity , an analysis is only as good as the sample analysed (AOAC sampling guidelines). Dissolving in water, storing at room temperature or heating to 200 °C would each destroy or alter the sample.
  15. Carbohydrate by difference accumulates the analytical errors of the other determinations because:
    1. It is not measured directly but derived by subtracting all other measured fractions from 100 (correct answer)
    2. Carbohydrates evaporate during drying
    3. Fibre determination destroys carbohydrates
    4. Ash contains carbohydrate

    Correct answer: It is not measured directly but derived by subtracting all other measured fractions from 100. Because carbohydrate is derived by subtracting all five measured fractions from 100, every analytical error in those five determinations accumulates in the carbohydrate figure. Carbohydrates do not evaporate during drying and ash does not contain carbohydrate.
  16. If duplicate moisture determinations on a sample give 11.8% and 12.4%, the correct laboratory practice is to:
    1. Repeat the determination, since the spread exceeds normal repeatability for oven moisture (correct answer)
    2. Report the average without question
    3. Discard the sample
    4. Report the higher value

    Correct answer: Repeat the determination, since the spread exceeds normal repeatability for oven moisture. The two duplicates differ by 0.6 percentage points, which exceeds the normal repeatability of oven moisture determinations (AOAC methods typically require agreement within about 0.2%), so the correct practice is to repeat the determination. Averaging, discarding the sample or reporting the higher value would all hide an unresolved error.
  17. Which fraction of proximate analysis is determined by ignition in a muffle furnace?
    1. Crude protein
    2. Ash (correct answer)
    3. Crude fibre
    4. Moisture

    Correct answer: Ash. Ash is the fraction determined by ignition in a muffle furnace; crude protein, crude fibre and moisture are each determined by different procedures.
  18. In proximate analysis, crude fibre determination removes digestible material by:
    1. Ignition at 550 °C
    2. Successive boiling with dilute acid and dilute alkali (correct answer)
    3. Distillation with toluene
    4. Extraction with petroleum ether

    Correct answer: Successive boiling with dilute acid and dilute alkali. Crude fibre is the organic residue left after successive boiling with dilute sulphuric acid and then dilute sodium hydroxide, corrected by ashing (AOAC 962.09). Ignition alone measures ash, toluene distillation measures moisture, and petroleum ether extracts fat.
  19. A complete proximate report of wheat flour would most plausibly read:
    1. Protein 60%, fat 30%, moisture 5%
    2. Carbohydrate 5%, protein 5%, fat 80%
    3. Moisture 12%, protein 11%, fat 1.5%, ash 0.6%, fibre 0.8%, carbohydrate by difference ~74% (correct answer)
    4. Ash 25%, fibre 20%, moisture 40%

    Correct answer: Moisture 12%, protein 11%, fat 1.5%, ash 0.6%, fibre 0.8%, carbohydrate by difference ~74%. The fractions sum to 12 + 11 + 1.5 + 0.6 + 0.8 + 74 = 99.9%, a proper mass balance, and the values match typical wheat-flour composition (USDA National Nutrient Database; Pearson's). The other options show impossible compositions, such as 80% fat or 40% moisture in flour.
  20. Proximate analysis of a food is best described as:
    1. A complete vitamin and mineral profile
    2. A microbiological safety assessment
    3. A sensory evaluation panel score
    4. A scheme giving the approximate bulk composition: moisture, ash, protein, fat, fibre, and carbohydrate (correct answer)

    Correct answer: A scheme giving the approximate bulk composition: moisture, ash, protein, fat, fibre, and carbohydrate. Proximate analysis is a scheme giving the approximate bulk composition of a food: moisture, ash, protein, fat, fibre and carbohydrate. It is not a vitamin/mineral profile, not a microbiological safety test and not a sensory score.