Food Technology Loksewa – Pickles
GIFSQ ID: ART-1167
Test your knowledge with this free 20-question Pickles quiz from Fruit & Vegetable Technology — part of the…
What this quiz covers
This set covers pickles from both directions: the fermented pickle that makes its own acid, and the vinegar pickle that borrows it. You will meet the succession that runs a cucumber fermentation, Leuconostoc mesenteroides first, then the acid-tolerant Lactobacillus species, and the brine strengths that decide which microbes win: 5 to 10 percent salt for active fermentation, and a much stronger 15 to 18 percent brine when vegetables are simply held as salt stock for later finishing.
The middle questions are the defects and the controls: bloaters from gas-forming fermentation at low salt, soft pickles from low salt letting pectinolytic enzymes work, and the kahm yeast scum that grows where air reaches the brine. The safety line is pH 4.6, the threshold below which finished acid pickles must sit, and the tools are the salometer for brine strength and calcium salts for firming texture. The set closes with the flavour side: mustard oil pickles, turmeric and mustard, and the allyl isothiocyanate that gives mustard oil its bite.
Fermented or vinegar: two routes, two different acids
A natural pickle is preserved by lactic acid that lactic acid bacteria make from the vegetable sugars themselves, with no vinegar involved. A vinegar pickle is preserved by acetic acid poured in from outside, and the vinegar has to be strong enough, about 4 to 6 percent acetic acid, to bring the product to a safe acidity. Mixing the two routes up is the most common mistake in this set: if the question names lactic acid bacteria, the answer is fermentation, and if it names vinegar strength, the answer is acetic acid.
How to use this quiz
Take the quiz cold first, then read the explanations below the player. Each answer gives the reason behind the key, with the numbers and definitions a food technologist is expected to know by heart.
Choose how you want to play
Note: the player shuffles the questions and the answer options on every attempt, so the numbers in the player will not match the numbers in the explanations below. Match each answer by its wording.
Answer explanations
Worked through the quiz? Here is why each correct answer is correct: the concept behind it, in plain terms.
- Natural (fermented) pickles are preserved mainly by:
Correct answer: Lactic acid produced by lactic acid bacteria fermenting vegetable sugars. Natural pickles are fermented pickles: lactic acid bacteria convert vegetable sugars to lactic acid, and that acid is what preserves the product (standard food-microbiology texts). No vinegar or added sugar is involved in the traditional fermented route. - In the early stage of cucumber pickle fermentation, the dominant bacteria are typically:
Correct answer: Leuconostoc mesenteroides, later succeeded by Lactobacillus species. In cucumber fermentation the fast-growing Leuconostoc mesenteroides starts the process, and as acidity rises the more acid-tolerant Lactobacillus species, such as L. plantarum, take over (published succession studies in 7% brine). Clostridium, Staphylococcus and E. coli are spoilage or pathogen organisms, not the fermenters. - For active lactic fermentation of vegetables, the brine strength is usually kept at:
Correct answer: 5-10% salt. Active lactic fermentation of vegetables runs in brines around 5 to 10% salt, strong enough to draw out juices and suppress spoilage organisms, yet mild enough for lactic acid bacteria to thrive (fermented-vegetable references). A 20 to 26% brine would stop fermentation entirely. - Vegetables are held in strong brine (15-18% salt) for:
Correct answer: Curing/storage – the salted stock is later desalted and finished into pickles. Vegetables are held in strong 15 to 18% brine as salt stock for curing and storage, then desalted before being finished into pickles (commercial pickle-making practice). That strength is for keeping the stock, not for fermentation or for eating. - Salt in pickle fermentation works by:
Correct answer: Drawing out vegetable juices by osmosis, favouring lactic acid bacteria while inhibiting spoilage organisms. Salt draws juice out of the vegetables by osmosis, creating a brine in which lactic acid bacteria outgrow spoilage organisms (food-microbiology texts). It does not kill all bacteria, add sweetness or raise the pH. - Vinegar pickles rely for preservation on:
Correct answer: Acetic acid from vinegar, which must be of adequate strength. Vinegar pickles are preserved by the acetic acid in the vinegar, which must be strong enough to bring the product to a safe acidity (USDA/NCHFP guidance). Oil or sugar alone cannot do that job. - Pickling vinegar should contain about what level of acetic acid?
Correct answer: 4-6%. Pickling vinegar is standardized at about 4 to 6% acetic acid, with the US home-canning standard built around 5% vinegar (USDA/NCHFP). At 0.5% there would be no safety margin, and 15 to 25% would be inedible. - 'Bloaters' – hollow pickles with gas pockets – are caused by:
Correct answer: Gas-forming fermentation inside the pickle at low salt or high temperature. Bloaters, hollow pickles with gas pockets, form when gas-producing fermentation happens inside the cucumber, typically when salt is too low or the temperature too high (commercial pickle defect literature). Cold storage or extra salt do not create gas pockets. - Soft, mushy pickles usually result from:
Correct answer: Low salt allowing pectinolytic enzymes and spoilage microbes to soften tissue. Low salt lets pectinolytic enzymes and spoilage microbes break down the vegetable tissue, giving soft, mushy pickles (pickle microbiology references). High salt firms texture; spices and glass jars have no such effect. - A surface scum on fermenting pickle brine is typically:
Correct answer: Film yeasts (kahm yeast) growing where air reaches the brine, and should be skimmed. The scum on fermenting brine is usually film (kahm) yeast growing where air reaches the surface, and it is skimmed off to prevent off-flavours (fermentation guides). It is not spice, protein or lactic-acid crystals. - Oil pickles (such as mustard-oil pickles) keep partly because:
Correct answer: The oil layer excludes air while salt, acid and spices inhibit microbes. In mustard-oil pickles the oil layer excludes air while the salt, acidity and spices each inhibit microbes, a combined hurdle effect (traditional pickle science). Oil itself neither ferments the vegetables nor raises the pH. - Blanching vegetables before pickling helps to:
Correct answer: Inactivate enzymes, fix colour and reduce microbial load. Blanching inactivates spoilage and browning enzymes, fixes the colour and reduces the microbial load before pickling (food-processing textbooks). It does not add salt or permanently increase crispness. - For food safety, the pH of finished acid pickles should be:
Correct answer: Below 4.6. Finished acid pickles must be below pH 4.6, the regulatory threshold for acidified foods (21 CFR 114), because Clostridium botulinum cannot grow and make toxin at or below that pH. Neutral or alkaline pH would be unsafe. - Calcium chloride or lime is sometimes used in pickling to:
Correct answer: Firm the texture by crosslinking pectin. Calcium ions crosslink pectin chains in the vegetable cell walls, which firms the pickle's texture (extension guidance on lime and calcium chloride treatments). They do not speed fermentation or add sourness or sweetness. - The best fermentation temperature for vegetable pickles is around:
Correct answer: 21–24 °C. Vegetable fermentation runs best around 21 to 24°C (about 70 to 75°F), where lactic acid bacteria dominate without favouring spoilage yeasts (fermented-pickle references). At 40°C spoilage organisms win, and at 5 to 10°C fermentation stalls. - A salometer is used in pickle making to measure:
Correct answer: Brine strength (salt concentration). A salometer is a hydrometer calibrated in degrees salometer, and it measures brine strength, the salt concentration, not sugar, temperature or acidity (pickle-making equipment references). Correct brine strength is a critical safety control. - Salt-cured pickle stock is desalted before finishing because:
Correct answer: The curing brine is too salty to eat and would prevent proper spicing and flavour balance. Curing brine at 15 to 18% salt is far too salty to eat, and it would overpower spicing and flavour balance, so the stock is desalted before finishing (commercial pickle practice). Desalting does not remove acid or add vitamins. - Turmeric and mustard in traditional pickles contribute:
Correct answer: Flavour, colour and mild antimicrobial/antioxidant effects. Turmeric and mustard contribute flavour and colour, and their bioactive compounds, curcumin and isothiocyanates, add mild antimicrobial and antioxidant effects (spice-chemistry literature). They are not a fermentation starter and they do more than colour alone. - Pasteurizing finished pickles in the jar is done to:
Correct answer: Destroy yeasts, moulds and vegetative bacteria for shelf stability. Pasteurizing finished pickles in the jar destroys yeasts, moulds and vegetative bacteria, giving shelf stability (food-processing texts). It does not start fermentation or carbonate the product. - The pungency of mustard oil used in pickles comes mainly from:
Correct answer: Allyl isothiocyanate released from glucosinolates. Mustard pungency comes from allyl isothiocyanate, released when the enzyme myrosinase hydrolyses glucosinolates in crushed mustard seed (mustard-chemistry literature). Capsaicin is the chilli compound; lactic and acetic acids are not responsible.