GIFSQ ID: FTN-0101
Food Allergen Management
Unit 1: The Major Allergens and Why They Matter
Note
Unit 1: The Major Allergens and Why They Matter
A question to start with
A child eats a biscuit at a school fair, a biscuit that looks exactly like the one she eats at home every week. Ten minutes later her lips swell, her throat feels tight, and a teacher calls for help. The biscuit at home is made with sunflower oil. The biscuit at the fair was made with peanut oil, and the label on the tray said only "biscuits". Nothing about the biscuit looked different, nothing smelled different, and no one in the room meant any harm. Yet a small amount of one food, peanut, was enough to set off a reaction that needed urgent care. This unit is about why that happens, which foods are most often involved, and why food makers, sellers, and servers all need to know the answer before the food reaches the plate.
An allergen is a food part, usually a protein, that the immune system of some people treats as a threat. For most people that protein is harmless food. For an allergic person the same protein sets off a defence response that can range from an itchy mouth to a reaction that closes the airways. The amount needed can be very small. A trace left on a knife, a spoonful of sauce, or a dusting of flour can be enough. That is why allergen management is not a small extra task in food work. It is a core part of making food safe.
Questions to think about
- Why can a food that is safe for almost everyone be dangerous for one person at the same table?
- A biscuit contains wheat, milk, and egg. Which of those are allergens, and how would a buyer know?
- If a food has no allergen in its recipe, can it still cause an allergic reaction?
Think about the biscuit question before you read on
Yes, it can. A food with no allergen in its recipe can still carry an allergen if it touched an allergen earlier: a shared mixer, a reused tray, a scoop that was used for peanut butter first. This is called cross-contact, and it is one of the main reasons allergen management covers the whole journey of a food, not only its recipe. Unit 3 looks at cross-contact in full.
What an allergy is, in plain words
A food allergy is a response of the immune system to a food protein. The immune system is the body system that defends against germs and other threats. In an allergic person, the immune system mistakes a food protein for a threat and reacts to it. The reaction is not caused by the food being dirty, spoiled, or badly cooked. The food can be fresh, clean, and well made, and still cause a reaction, because the protein itself is the trigger.
This is different from food intolerance. Intolerance, such as difficulty digesting lactose in milk, usually causes discomfort in the gut and depends on how much is eaten. An allergy is driven by the immune system, can affect the skin, gut, breathing, and blood pressure, and can be set off by a small amount. The two are often mixed up in everyday talk, and the mix-up matters: a person who says "I cannot eat milk" may mean either one, and the care needed is different. In food service, the safe habit is to treat every stated food problem seriously and to ask what happens when the food is eaten, so the right care is given.
Allergy can start at any age, and it can change over time. Some children outgrow milk or egg allergy as they grow older. Peanut, tree nut, fish, and shellfish allergy more often last into adult life. An adult can also develop a new allergy to a food eaten for years without trouble. Nobody can tell from looking at a person whether they have an allergy, and nobody can tell from looking at a food whether it contains an allergen. That is why clear labels, clear records, and clear questions at the point of serving matter so much.
The foods most often involved
Across the world, a small group of foods accounts for most allergic reactions. The exact list differs a little from place to place, because diets differ and because each set of rules names its own list, but the same foods appear again and again: peanut, tree nuts, milk, egg, wheat, soy, fish, and shellfish such as prawn, crab, and mussel. Sesame is also widely listed now, and in some systems celery, mustard, and lupin appear too. These are often called the major allergens. They are major not because they are the only foods that can cause allergy, because almost any food can cause an allergy in someone, but because they cause most reactions and most severe reactions.
Peanut deserves special attention. Peanut allergy is common, it often starts in childhood, it often lasts for life, and it can cause severe reactions from small amounts. Peanut is also widely used in foods where a buyer may not expect it: sauces, curries, baked goods, sweets, and snack bars. Peanut flour and peanut butter are used as ingredients, and peanut oil may be used for frying. A food maker who uses peanut anywhere in a factory must treat the whole factory as a place where peanut can travel, unless strict separation is in place.
Tree nuts are a group, not one food: almond, cashew, walnut, hazelnut, pistachio, pecan, Brazil nut, and macadamia are all tree nuts. A person allergic to one tree nut may also react to another, but not always, and only a doctor can judge that for one person. In food work, each nut is named on its own in records and labels, because "nuts" on its own does not tell an allergic buyer which nut is present. Coconut is a fruit of a palm tree and is handled in different ways in different systems, so the safe habit is to name coconut clearly whenever it is used and let the buyer decide with their own medical advice.
Milk allergy is different from lactose intolerance, and the difference is a common source of error. Milk allergy is a response to milk proteins, such as casein and whey proteins. A person with milk allergy must avoid milk and foods made from milk, including butter, cheese, cream, and yoghurt, and must also watch for milk proteins used as ingredients, such as casein, whey, and lactose that carries milk protein with it. Lactose intolerance is a problem digesting milk sugar, and many people with it can eat small amounts of hard cheese or yoghurt. A cook who hears "no milk" must not guess which one it is. Asking one extra question, "Is it an allergy, and what happens if you eat it?" prevents a dangerous guess.
Egg allergy is most often an allergy to egg white proteins, though yolk proteins can also be involved. Egg is used in baking, pasta, sauces such as mayonnaise, and many processed foods, and it can be present as egg powder or dried egg. Egg white is also used to clarify some drinks and to glaze baked goods. Wheat allergy is different from coeliac disease, though both mean wheat must be avoided: wheat allergy is an immune response to wheat proteins, while coeliac disease is an immune response to gluten that damages the gut over time. Both need strict avoidance, and both need clear labels. Soy is a legume, like peanut, and soy ingredients appear widely: soy sauce, tofu, soy flour, soy lecithin, and textured soy protein. Fish and shellfish are separate groups, and a person allergic to fish may not be allergic to shellfish, and the reverse, but in a kitchen the two must still be kept apart because their proteins travel in the same ways.
Why small amounts matter
One of the hardest ideas in allergen work is that a tiny amount can matter. In cooking, a pinch of salt or a spoonful of spice changes flavour a little. In allergy, a trace of peanut protein can change a meal from safe to dangerous. The reason is that the immune response is not a dose response like flavour: once the immune system recognises the protein, it can react strongly even to a small amount. Some people react to amounts measured in milligrams, which is less than a crumb. Others need more, but no food worker can tell by looking how sensitive one person is, so the only safe rule is that any amount counts.
This is why "a little bit will be fine" is one of the most dangerous sentences in food service. A cook who picks nuts off a salad, scrapes sauce off a plate, or fries an allergen-free item in oil that fried a nut-coated item has not removed the allergen. The protein stays behind in crumbs, in oil, on the tongs, and in the pan. The only safe answer to "a little bit" is a fresh preparation with clean tools, clean hands, and clean surfaces, using ingredients that are known to be free of that allergen.
Cooking does not reliably destroy allergens either. Heat changes some proteins, and a few people can eat a food only when it is well baked, but that is a medical fact about one person, never a rule a cook can apply. Peanut protein survives roasting. Milk and egg proteins survive much cooking. Frying, boiling, and baking do not make an allergen safe, and a food worker must never tell a customer that cooking has fixed the problem. The allergen is still there, in the same food, after cooking.
Who is affected and how often
Food allergy affects children and adults in every part of the world, and the number of people affected has grown over recent decades in many places. Exact numbers differ between studies, because studies count in different ways, but the pattern is clear: food allergy is common enough that every food business will serve allergic customers, whether it knows it or not. In a school, a restaurant, a bakery, or a factory canteen, allergic eaters are present every day. A business that has never had an incident has usually been lucky, not safe, and luck is not a control measure.
The effects reach beyond the person who reacts. Families plan meals, school trips, and celebrations around allergy. Parents read every label. Teenagers learn to carry emergency medicine and to ask questions in restaurants. Food businesses that handle allergy well earn trust that keeps customers coming back for years, because an allergic customer who feels safe brings family and friends with them. Businesses that handle it badly lose that trust in a single incident, and can face legal action and closure. Allergen management is therefore both a safety duty and a business matter, and the two point the same way.
How reactions show themselves
Allergic reactions usually start within minutes of eating, though they can take up to a couple of hours. Early signs are often mild: itching in the mouth, a few spots on the skin, a runny nose, or stomach discomfort. A reaction can then grow: swelling of the lips, tongue, or face, widespread hives, vomiting, cramps, wheezing, and difficulty breathing. The most severe form is anaphylaxis, a reaction that affects more than one body system at once, with breathing difficulty, a drop in blood pressure, dizziness, or collapse. Anaphylaxis is a medical emergency and needs urgent care and, where the person carries it, an adrenaline auto-injector.
Food workers are not doctors, and they must not try to judge whether a reaction is mild or severe. The rule is simple: if a customer says they are having an allergic reaction, act at once, call for emergency help, and follow the customer's own plan if they have one, including helping them use their auto-injector if they ask. Do not wait to see if it gets better. Do not offer water, food, or medicine of your own. Speed matters, and hesitation is the main error. Every food business should have a written plan for this moment, and every worker should know where it is and what it says before the moment arrives.
The diagram shows the chain that allergen management is built to break. Each link is a place where a control can stop the chain: a correct recipe, a clean line, a clear label, an honest answer, and a practiced emergency plan.
Where allergens hide in foods
Allergens hide in plain sight in many processed foods, and the hiding places are a large part of the work. Wheat hides in soy sauce, in some spice mixes, and in foods thickened with wheat flour. Milk hides in chocolate, in some breads, in processed meats, and in foods that use whey powder or casein as a binder. Egg hides in pasta, in glazes, in some drinks, and in mayonnaise and dressings. Soy hides in vegetable oil blends, in lecithin used as an emulsifier, and in textured protein used to extend meat. Fish hides in fish sauce, in some Worcestershire-style sauces, and in stocks. Sesame hides in tahini, in hummus, in some bread toppings, and in oils.
A food technologist reads an ingredient list differently from an ordinary shopper. The technologist asks, for each ingredient, what it is made from, what it was made with, and what it touched on its way here. A flavouring, a colour, a spice mix, or a processing aid can carry an allergen that does not appear in the name of the ingredient. That is why factories ask suppliers for full allergen statements for every ingredient, and why a recipe change is never made on the basis of a trade name alone. A new spice mix with the same name as the old one can have a different allergen in it, and the first sign of the change may be a reaction.
Allergens also hide in foods that are sold loose, without a pack: bread in a bakery, dishes in a restaurant, sweets in a market stall, salads in a deli counter. In those settings the label is the spoken word of the server, the menu note, or the sign on the counter, and the record behind it is the recipe file. If the recipe file is out of date, the spoken answer is wrong, and the customer has no way to know. Keeping recipe files current, and making sure the person who answers the customer is reading the current file, is as much a part of allergen control as cleaning a line.
The food worker's duty in one line
Every person who handles food, from the buyer who orders ingredients to the server who hands over a plate, is part of allergen management. The buyer must know the allergens in every ingredient and must tell the kitchen when a supplier changes. The cook must follow the recipe as written and must not swap an ingredient without checking its allergens. The cleaner must clean in the order and with the method that removes allergen protein, not only visible dirt. The server must ask, listen, and answer honestly, and must say "I do not know, let me check" rather than guessing. The manager must train, check, and keep records, because a control that is not checked is a hope, not a control.
Practical note: Start any allergen work with a map. List every food you make or sell, list every ingredient in each one, and mark the allergens in each ingredient. Then list every place those ingredients are stored, weighed, mixed, cooked, packed, and served, and mark where an allergen could move from one food to another. That map, kept on one page and updated whenever a recipe or supplier changes, is the base for every control in the units that follow.
Quick self-check
Question: A customer says "no milk" and you are not sure whether it is allergy or intolerance. What should you do?
Ask one polite question: "Is it an allergy, and what happens if you eat milk?" Then treat it as an allergy unless the answer makes it clear it is not, and prepare the food with clean tools and ingredients known to be free of milk. Never guess, and never assume a small amount is safe.
Question: Why is picking nuts off a salad not a safe fix for a nut-allergic customer?
Because the nut protein stays behind in crumbs, in dressing, and on the leaves the nuts touched. Removing the visible nuts does not remove the protein, so the salad is still unsafe for that customer. The safe fix is a fresh salad made with clean tools.
Try it yourself
Go to your kitchen and pick five packaged foods: a biscuit, a sauce, a breakfast cereal, a snack bar, and a frozen meal. Read each ingredient list and write down every allergen you can find, including allergens named in phrases such as "contains milk" and allergens hidden inside ingredients such as whey, soy lecithin, or fish sauce. Then compare your five lists: which allergen appears most often, and which food surprised you most? Write one line for each food saying what you would tell an allergic friend before they ate it.
Key ideas to carry forward
- An allergen is usually a food protein that the immune system of some people treats as a threat, and the reaction can range from mild itching to anaphylaxis.
- Food allergy is different from food intolerance: allergy is an immune response, can affect breathing and blood pressure, and can be set off by a small amount.
- A small group of foods, including peanut, tree nuts, milk, egg, wheat, soy, fish, shellfish, and sesame, accounts for most reactions.
- Small amounts matter, cooking does not reliably destroy allergens, and picking an allergen off a dish does not make the dish safe.
- Allergens hide in processed foods, in spice mixes, sauces, and loose foods sold without a pack, so records and labels must be current.
- Every food worker, from buyer to server, is part of allergen management, and "I do not know, let me check" is always better than a guess.
- An allergic reaction is a medical emergency when breathing or blood pressure is affected: act at once and call for emergency help.
Glossary
Allergen
A food part, usually a protein, that causes an immune response in some people. Food tech example: peanut protein in a biscuit is an allergen for a person with peanut allergy.
Allergy
An immune system response to a substance, such as a food protein, that the body treats as a threat. Food tech example: a child with egg allergy develops hives after eating cake made with egg.
Anaphylaxis
A severe allergic reaction affecting more than one body system at once, with breathing difficulty or a drop in blood pressure. Food tech example: a person who eats shellfish and then cannot breathe needs urgent emergency care for anaphylaxis.
Casein
The main protein in milk, present in cheese, butter, and many processed foods. Food tech example: casein in a chocolate bar makes the bar unsafe for a person with milk allergy.
Coeliac disease
A long-term immune response to gluten that damages the gut lining, so gluten must be strictly avoided. Food tech example: a person with coeliac disease needs bread made without wheat, barley, or rye.
Cross-contact
The transfer of an allergen from one food or surface to another food that should not contain it. Food tech example: peanut butter left on a knife spreads peanut protein to the next sandwich.
Gluten
A group of proteins in wheat, barley, and rye that gives dough its stretch and structure. Food tech example: gluten in wheat flour is what makes bread dough rise and hold its shape.
Immune system
The body system that defends against germs and other threats, and that reacts to allergens in allergic people. Food tech example: the immune system of a person with fish allergy reacts to fish protein as if it were a germ.
Intolerance
Difficulty digesting or handling a food, without an immune response, often depending on how much is eaten. Food tech example: a person with lactose intolerance feels discomfort after drinking a large glass of milk.
Lactose
The sugar naturally present in milk. Food tech example: lactose in milk is broken down by an enzyme in the gut, and people who lack enough of that enzyme may feel discomfort after drinking milk.
Peanut
A legume grown underground, whose protein is a common and often severe allergen. Food tech example: peanut flour in a sauce is an allergen even though the sauce does not taste of peanut.
Sesame
A small seed used whole, as paste, and as oil, now widely listed as a major allergen. Food tech example: sesame seeds on a bread roll must be declared so a sesame-allergic buyer can avoid the roll.
Soy lecithin
A substance from soy used as an emulsifier to mix oil and water in foods. Food tech example: soy lecithin in chocolate helps the chocolate stay smooth, and it must be declared for soy-allergic buyers.
Tree nut
A nut that grows on a tree, such as almond, cashew, walnut, or hazelnut, as distinct from peanut, which is a legume. Food tech example: almond in a cake is a tree nut allergen and must be named on its own.
Whey
The liquid part of milk left after curd forms, containing milk proteins, and used as an ingredient in many foods. Food tech example: whey powder in a snack bar makes the bar unsafe for a person with milk allergy.
References
- Sicherer, S. H. and Sampson, H. A., Food allergy, 2nd edition, 2014.
- Taylor, S. L. and Hefle, S. L., Food Allergies and Intolerances, 2005.
- Food and Agriculture Organization, Food Allergies, 2021.
- Jackson, L. S., Food Allergen Management, 2013.
- National Dairy Development Board, Laboratory Handbook for Dairy Industry, March 2001.
Unit 2: How Allergy Works: The Immune Response
Note
Unit 2: How Allergy Works: The Immune Response
A question to start with
A woman eats a prawn curry she has eaten a dozen times before, and this time her mouth itches, her skin breaks out in raised red patches, and her stomach cramps. The prawns came from the same supplier, the recipe did not change, and the cook did nothing different. What changed was inside her body, not in the kitchen. Her immune system, which had met prawn protein many times without trouble, had learned to treat it as a threat, and this time it reacted. This unit follows that learning: how the immune system meets a food protein, how it remembers it, and how that memory turns a normal meal into a reaction.
The immune system is the body's defence network. Its job is to tell what belongs in the body from what does not, and to remove what does not belong. It does this with cells that patrol the blood and tissues, and with proteins called antibodies that recognise particular shapes. Most of the time it works quietly and well: it clears germs, heals cuts, and leaves food alone. In allergy, the same system makes a mistake about a food protein, and the mistake is remembered. Once the memory is formed, the next meeting with that protein can set off a fast and strong response.
Questions to think about
- Why does the immune system react to a harmless food protein as if it were a germ?
- A person eats peanuts for years without trouble and then reacts. What could have changed inside the body?
- Why does a reaction often start within minutes, and why can a second reaction follow hours later?
Think about the prawn question before you read on
Nothing in the food needs to change. Allergy develops when the immune system first meets a protein and learns to treat it as a threat, a stage called sensitisation, which causes no symptoms on its own. The reaction happens on a later meeting, when the immune system recognises the protein again and releases chemicals that cause the symptoms. The gap between learning and reacting can be months or years, which is why a food eaten safely for years can suddenly cause a reaction.
The immune system in plain words
The immune system has two broad arms. The first arm, innate immunity, is the general defence present from birth: skin, mucus, stomach acid, and cells that swallow germs without needing to recognise them in detail. The second arm, adaptive immunity, learns. It remembers the shapes of things it has met and responds faster and more strongly the next time it meets them. Allergy lives in the adaptive arm, because allergy is a learned response to a particular protein shape.
The learning cells are lymphocytes, white blood cells that live in blood, in lymph nodes, and in tissues such as the gut wall. There are B cells, which make antibodies, and T cells, which help direct the response. Antibodies are Y-shaped proteins that fit one particular shape, like a key fits one lock. When a B cell makes an antibody against a shape, other cells remember that shape, so the body can make the same antibody quickly next time. This memory is the reason vaccines work, and it is also the reason allergy lasts: the body remembers the food protein as a threat for years.
The gut is where most food proteins first meet the immune system. The gut wall is not a solid wall. It is a living surface that takes in nutrients and keeps the rest out, and it is lined with immune cells that sample what passes through. In most people, the gut immune system learns that food proteins are safe, a state called tolerance. In an allergic person, that learning goes the other way for one protein: the gut immune system treats it as a threat and starts the response that leads to allergy. Why tolerance fails for one protein in one person and not in another is one of the main questions allergy science is still working on, and the answer involves genes, the microbes in the gut, the timing of first exposure, and the state of the skin and gut lining at the time.
Sensitisation: learning without symptoms
Sensitisation is the first stage of allergy, and it causes no symptoms. A food protein enters the body, often through the gut, sometimes through broken skin, and the immune system meets it. In a person who will become allergic, the response tilts toward making a particular type of antibody called immunoglobulin E, or IgE. IgE antibodies are made against the food protein, and they attach to the surface of mast cells, which are cells found in skin, gut, lungs, and other tissues. The mast cell now carries IgE antibodies that fit that food protein, like a guard holding a photograph of one intruder. Nothing has happened yet that the person can feel. The person may eat the food again with no trouble while this learning is still going on.
Several things can shape whether sensitisation happens. The protein itself matters: some food proteins are stable, survive digestion, and keep their shape, which makes them more likely to be recognised. The amount and timing matter: very early or very late first exposure, and the amount given, can change the outcome. The state of the body matters: skin that is broken by eczema can let food proteins in through the skin, and the immune system may learn to treat them as threats when it meets them there first. This is one reason skin care in early childhood is part of allergy prevention advice given by doctors. The microbes in the gut matter too, because they help train the immune system, and a gut with a rich mix of microbes tends to favour tolerance. None of these is a single cause, and none of them lets a food worker predict who will become allergic. What matters for food work is that sensitisation is silent, so a person can be sensitised and not know it until the day a reaction happens.
The reaction: IgE, mast cells, and histamine
When a sensitised person eats the food again, the protein reaches the gut and meets the IgE antibodies waiting on mast cells. The protein fits two or more IgE antibodies at once and links them together, a step called cross-linking. That link is the signal for the mast cell to release its contents, including a chemical called histamine and other chemicals that cause inflammation. Histamine widens blood vessels, makes them leak fluid, and irritates nerve endings. Those three effects explain most of the early symptoms: redness and swelling where fluid leaks, itching where nerves are irritated, a runny nose and watering eyes, and cramps where the gut wall swells.
Other cells join in after the first release. White blood cells called eosinophils arrive and release chemicals that keep the inflammation going, which is one reason a reaction can have a second phase hours later, after the first symptoms have settled. The gut, skin, and airways are all rich in mast cells, so a reaction can show in all three places at once. In the gut, the reaction causes nausea, cramps, vomiting, and diarrhoea. In the skin, it causes hives and swelling. In the airways, it causes swelling and narrowing, which makes breathing hard. When the reaction spreads through the whole body and blood pressure falls, it is anaphylaxis, and it needs urgent care.
The speed of the reaction tells a food worker something useful. IgE reactions usually start within minutes, because the mast cells are already armed with IgE and only need the protein to arrive. A reaction that starts several hours after eating, or that mainly affects the gut over a day or more, may be a different kind of response, and a doctor is the person to sort that out. Food workers do not diagnose. They note what was eaten, when symptoms started, and what the symptoms were, and they pass that record to the medical team. A good record can help a doctor a great deal later.
Why reactions differ in strength
The same food can cause a mild reaction in one person and a severe reaction in another, and the same person can have a mild reaction one day and a severe one the next. Several factors shift the strength. The amount eaten matters: a larger amount usually brings a stronger reaction, though the amount that sets off a reaction at all can be very small. The form of the food matters: raw or lightly cooked protein often keeps more of its shape than well-cooked protein, and a food eaten on an empty stomach may be absorbed faster. The state of the body matters: exercise, illness, lack of sleep, and alcohol can lower the threshold, so a food that caused only itching on a quiet day can cause a stronger reaction on a day when the person is unwell or has just exercised. Medicines matter too: some medicines can make a reaction stronger or make emergency treatment less effective, which is another reason the person's own medical plan must be followed rather than improvised.
One more factor is the protein itself. Food proteins are not all the same shape, and cooking, processing, and digestion change their shape. Some proteins break down quickly in stomach acid and by digestive enzymes, so little of the original shape reaches the immune cells. Others survive: they resist acid, resist heat, and resist enzymes, so they arrive in the gut with their shape intact. Peanut proteins are good survivors, which is one reason peanut allergy is often severe and long-lasting. Milk and egg proteins change more with heat, which is why some people with milk or egg allergy can eat those foods when they are well baked into a cake, while others cannot. A food worker must never use that fact to decide for a customer: only the customer's own doctor can say whether baked milk or baked egg is safe for that person.
Allergy, intolerance, and coeliac disease: three different paths
These three are often mixed up, and the mix-up causes real harm, so it is worth setting them out plainly. Food allergy, as this unit describes, is an IgE-driven immune response, fast, often within minutes, able to affect skin, gut, airways, and blood pressure, and able to cause anaphylaxis. Food intolerance is not driven by IgE. Lactose intolerance is caused by a lack of the enzyme lactase, which breaks down milk sugar, so undigested lactose ferments in the gut and causes bloating, wind, and diarrhoea. It depends on amount, it does not affect breathing, and it is not life threatening, though it is uncomfortable and real. Coeliac disease is an immune response to gluten, but it is not an IgE allergy. It is driven by different immune cells, it damages the gut lining over days and weeks, and the damage builds up with repeated exposure, even in small amounts. A person with coeliac disease must avoid gluten strictly, not because one crumb will cause anaphylaxis, but because repeated small amounts keep the gut damaged and lead to poor absorption of nutrients over time.
A food worker who hears "I cannot eat wheat" therefore needs to know which of these it is, or to treat it with the care that covers all of them: strict avoidance, clean tools, and no guessing. The safest question is a simple one: "Is it an allergy, and what happens when you eat it?" The answer tells the worker how urgent the care must be and what to do if a reaction starts. A worker who is told "it is coeliac disease" must also know that the care is strict avoidance and clean preparation, and that the person will not carry an auto-injector, because the risk is gut damage over time rather than a sudden airway reaction. Knowing the difference keeps the care right and keeps the worker from giving wrong reassurance.
Testing and diagnosis: what doctors do
Diagnosis belongs to doctors, and food workers should know what it involves so they do not offer their own. A doctor starts with a careful history: what was eaten, how much, how soon symptoms started, what the symptoms were, and whether the same food has caused trouble before. The doctor may then use a skin prick test, in which a tiny amount of allergen is placed on the skin and the skin response is watched, or a blood test that measures IgE antibodies to a particular food. Neither test on its own proves a food allergy: a person can have IgE to a food and eat it without trouble, and a person can have a real allergy with a small test result. The test must be read together with the history, and sometimes the doctor arranges a supervised food challenge, in which the food is eaten in small, increasing amounts in a clinic where emergency care is ready. A food challenge is the most direct test, and it must never be tried at home or in a restaurant.
Food workers sometimes meet customers who have diagnosed themselves, or who have been told by a non-medical test that they are allergic to many foods. The worker's job is not to judge the diagnosis. It is to serve the food the customer asks for, with the care the customer asks for, and to be honest about what can and cannot be guaranteed. A kitchen can say what is in a dish and how it was prepared. It cannot promise that a food is free of every trace of an allergen unless it has the controls to back that promise, and it must say so plainly. Honesty about limits is part of good allergy care, and customers who live with allergy every day can tell the difference between an honest answer and a careless reassurance.
The diagram shows the two stages: silent learning, then fast reaction. The gap between the two stages is why a food eaten safely for years can suddenly cause a reaction, and why no food worker can tell by looking who is sensitised.
What this means for food work
The science in this unit points to four plain rules for food work. First, the trigger is a protein, and the protein is present whether or not it can be seen, smelled, or tasted, so controls must be built on records and cleaning, not on the senses. Second, sensitisation is silent, so every customer must be treated as if they could be allergic, and every stated allergy must be taken seriously the first time it is mentioned. Third, the reaction is fast and can grow, so the emergency plan must be known before it is needed, not read for the first time during a reaction. Fourth, the strength of a reaction cannot be predicted from the last one, so a mild reaction last time is never a reason to take less care this time.
A food business that understands these four rules will make different choices from one that does not. It will keep recipe records that name every allergen. It will clean in a way that removes protein, and check that the cleaning worked. It will label clearly and answer questions honestly. It will train every worker, including new and part-time workers, before they handle food or serve customers. And it will record every incident, however small, because a small reaction that is recorded and learned from is worth more than a large reaction that is forgotten. The units that follow turn each of these choices into practical controls.
Cross-reactivity: when the immune system mistakes one food for another
Cross-reactivity is the reason an allergic person can react to a food they have never eaten. It happens because two proteins from different foods look alike to the immune system. The immune system learned to react to the first protein, and when it meets the second protein, with a similar shape, it reacts to that one too. The reaction is not a new allergy. It is the same allergy, recognising a look-alike protein. The most common example is the legume family: peanut is a legume, and so are soy, lentils, chickpeas, and peas. A person with peanut allergy may also react to another legume, though many do not, and only a doctor can judge that for one person. The same pattern appears with tree nuts: a person allergic to walnut may react to pecan, because the two nuts are closely related, and a person allergic to cashew may react to pistachio, for the same reason.
Cross-reactivity also links foods to pollens. A person allergic to birch pollen may feel itching in the mouth after eating apple, carrot, or hazelnut, because the proteins in those foods look like the birch pollen protein. This is often called oral allergy syndrome, and its symptoms are usually mild and limited to the mouth, because the proteins that cause it break down quickly in the stomach. It is different from a peanut or tree nut allergy, where the proteins survive digestion and can cause a severe reaction. A food worker must not confuse the two: a customer who says "apple makes my mouth itch" needs care, but the care is different from the care for a customer who says "peanut closes my throat", and the worker must ask what happens, and how severe it is, rather than guessing from the food name alone.
For food work, cross-reactivity means that records must name each food on its own, and must not group foods by family. A label that says "nuts" does not tell a buyer whether the nut is walnut, cashew, or almond, and a buyer who is allergic to one tree nut but not another needs that detail. A recipe that swaps one legume for another, such as swapping soy for chickpea, or one tree nut for another, such as swapping walnut for pecan, must be checked as a new recipe, with a new allergen assessment, because the swap may bring in a protein that cross-reacts with a customer's allergy. A supplier who changes one ingredient for a related one, such as swapping one spice for another from the same plant family, must tell the maker, because the change may matter to a customer whose allergy is to the family, not only to the single food.
Practical note: When a customer reports a reaction in your business, write down four things at once: what was eaten and when, when symptoms started, what the symptoms were, and what was done. Keep that record with the recipe and the supplier records for that day. A doctor, an inspector, or a manager who reads that record later needs those four facts, and memory alone will not hold them.
Quick self-check
Question: What is sensitisation, and why does it cause no symptoms?
Sensitisation is the first stage, when the immune system meets a food protein and makes IgE antibodies against it, which attach to mast cells. No chemicals are released yet, so there are no symptoms. Symptoms appear only on a later meeting, when the protein links the IgE together and the mast cell releases histamine.
Question: Why can the same person have a mild reaction one day and a severe reaction another day?
Because the strength depends on the amount eaten, the form of the food, and the state of the body at the time, including exercise, illness, and lack of sleep. A mild reaction last time does not predict a mild reaction next time, so the same care is needed every time.
Try it yourself
Draw the reaction chain from this unit on a sheet of paper, using six boxes: first meeting, sensitisation, IgE on mast cells, later meeting, histamine release, symptoms. Under each box, write one sentence in your own words. Then add a red line under the two boxes where a food worker can break the chain: the later meeting can be prevented by correct recipes, cleaning, and labelling, and the symptoms can be eased by a practiced emergency plan. Keep the drawing where you study, and test yourself by covering the sentences and saying each one from memory.
Key ideas to carry forward
- Allergy is a learned immune response: the immune system makes IgE antibodies against a food protein and remembers it.
- Sensitisation is silent and causes no symptoms; the reaction happens on a later meeting with the same protein.
- When the protein links IgE on mast cells, histamine and other chemicals are released, causing itching, swelling, cramps, and breathing difficulty.
- Reaction strength varies with amount, food form, and the state of the body, and a mild reaction last time does not predict the next one.
- Allergy, intolerance, and coeliac disease are three different paths and need different care, so ask which one it is.
- Diagnosis belongs to doctors, using history, skin or blood tests, and sometimes a supervised food challenge, never a home test.
- Food work must be built on records, cleaning, honest answers, and a practiced emergency plan, because the trigger cannot be seen or tasted.
Glossary
Antibody
A Y-shaped protein made by the immune system that fits one particular shape, such as one food protein. Food tech example: an antibody that fits peanut protein is what lets the immune system recognise peanut.
Anaphylaxis
A severe allergic reaction affecting more than one body system at once, with breathing difficulty or a drop in blood pressure. Food tech example: a person who eats shellfish and then cannot breathe needs urgent emergency care for anaphylaxis.
B cell
A white blood cell that makes antibodies against shapes it has met. Food tech example: B cells in a person with egg allergy make antibodies that fit egg white protein.
Eosinophil
A white blood cell that arrives after the first stage of a reaction and releases chemicals that keep inflammation going. Food tech example: eosinophils help explain why a reaction can have a second phase hours later.
Histamine
A chemical released by mast cells that widens blood vessels, makes them leak, and irritates nerves. Food tech example: histamine release after eating fish causes itching, redness, and swelling.
IgE
Immunoglobulin E, the type of antibody that drives most food allergy, attaching to mast cells and waiting for its protein. Food tech example: IgE against milk protein sits on mast cells in a person with milk allergy.
Lymphocyte
A white blood cell of the adaptive immune system, including B cells and T cells, that learns and remembers shapes. Food tech example: lymphocytes in the gut wall sample food proteins and help decide whether to tolerate them.
Mast cell
A cell found in skin, gut, and airways that carries IgE on its surface and releases histamine when its IgE is linked by a protein. Food tech example: mast cells in the gut wall release histamine when they meet egg protein in a person with egg allergy.
Sensitisation
The first stage of allergy, when the immune system meets a protein and makes IgE against it, without causing symptoms. Food tech example: a child becomes sensitised to peanut without any sign, and the reaction appears on a later eating.
T cell
A white blood cell that helps direct the immune response, including whether it tilts toward allergy or tolerance. Food tech example: T cells in the gut help the immune system learn to tolerate most food proteins.
Tolerance
The state in which the immune system accepts a food protein as safe and does not react to it. Food tech example: most people have tolerance to wheat protein, so they eat bread without any immune reaction.
Cross-linking
The step in which a protein links two or more IgE antibodies together on a mast cell, signalling the cell to release its chemicals. Food tech example: peanut protein cross-links IgE on a mast cell and sets off histamine release.
Inflammation
The body response to injury or to a perceived threat, with redness, swelling, warmth, and pain. Food tech example: inflammation in the airways during an allergic reaction narrows the air passages and makes breathing hard.
Enzyme
A protein that speeds up a chemical change in the body, such as breaking down a food part. Food tech example: lactase is the enzyme that breaks down lactose, the sugar in milk.
Food challenge
A medical test in which a food is eaten in small, increasing amounts under supervision in a clinic, to confirm or rule out an allergy. Food tech example: a doctor arranges a food challenge to test whether a child has outgrown milk allergy.
Cross-reactivity
A reaction to a second food whose protein looks like the protein that caused the first allergy. Food tech example: a person allergic to walnut may react to pecan, because the two tree nuts are closely related.
Oral allergy syndrome
Itching in the mouth after eating a food whose protein looks like a pollen protein, usually mild and limited to the mouth. Food tech example: a person allergic to birch pollen may feel itching after eating apple, because the apple protein looks like the birch pollen protein.
References
- Sicherer, S. H. and Sampson, H. A., Food allergy, 2nd edition, 2014.
- Taylor, S. L. and Hefle, S. L., Food Allergies and Intolerances, 2005.
- Abbas, A. K., Lichtman, A. H. and Pillai, S., Cellular and Molecular Immunology, 9th edition, 2018.
- Food and Agriculture Organization, Food Allergies, 2021.
- Boyce, J. A., Assa'ad, A. and Burks, A. W., Guidelines for the diagnosis and management of food allergy, 2010.
Unit 3: Cross-Contact: Where It Happens and How to Stop It
Note
Unit 3: Cross-Contact: Where It Happens and How to Stop It
A question to start with
A bakery makes two cakes on the same morning. The first is a walnut cake. The second is a plain sponge cake, made with a recipe that contains no nuts at all. The baker uses the same mixing bowl for both, wiping it out with a cloth between cakes. A customer with walnut allergy buys a slice of the sponge cake, eats it, and reacts. The recipe was safe. The bowl was not. The walnut protein left in the bowl, on the cloth, and on the baker's hands moved into a cake that should have been safe. This unit follows that movement: where allergens travel in a kitchen or factory, and how to stop them.
Cross-contact is the transfer of an allergen from one food, surface, tool, or hand to another food that should not contain it. It is different from cross-contamination with germs in one important way: germs can be killed by cooking, while allergen proteins usually survive cooking, so a cross-contact that happens before cooking is still a problem after cooking. Cross-contact is also different from an ingredient error: the recipe can be correct and the label can be correct, and the food can still be unsafe because of how it was handled. That is why allergen management is about the whole journey of a food, not only its recipe.
Questions to think about
- A bowl is wiped clean and looks clean. Why might it still carry walnut protein?
- Which is more likely to spread an allergen in a kitchen: a shared fryer, a shared chopping board, or a shared oven? Why?
- A factory makes a nut-free product first thing in the morning, before any nut product is made. What could still go wrong?
Think about the wiped bowl before you read on
Wiping removes visible crumbs but leaves protein behind in a thin film on the surface, in scratches, and in the cloth itself, and the cloth then spreads it to the next surface it touches. Protein is not visible, so a surface can look clean and still carry enough protein to cause a reaction. Only washing with detergent and water, in the right order, removes it, and the cleaning must be checked, not assumed.
Where allergens travel: the main routes
Allergens travel on hands, on tools, on surfaces, in air, in liquids, and in shared equipment. Hands are the most common route. A cook who handles peanut butter and then handles bread without washing hands moves peanut protein to the bread. Gloves help only if they are changed: a glove that touched an allergen is no different from a hand that touched it. Hand washing with soap and water, for the full time, is the control, and it must happen every time hands move from an allergen food to another food, not only at the start of a shift.
Tools are the second route. Knives, spoons, scoops, tongs, whisks, piping bags, and measuring jugs all carry protein in their surfaces and joints. A scoop used for peanut flour and then for rice flour moves peanut into the rice flour. A knife used to cut a cheese sandwich and then a plain sandwich moves milk protein. A piping bag used for a nut filling and then for a plain cream moves nut protein into the cream. The fix is simple in words and hard in practice: one set of tools for allergen foods and one set for other foods, or full washing between uses, with the tools stored apart so they cannot be mixed up. Colour coding helps: red handles for nut tools, blue for milk tools, and so on, with the code posted on the wall where everyone can see it.
Surfaces are the third route. Worktops, chopping boards, trays, and conveyor belts all hold protein in scratches and joints. A board used for fish and then for vegetables carries fish protein to the vegetables. A tray that held nut biscuits and then holds plain biscuits carries nut crumbs and protein. A conveyor belt that carries a milk chocolate bar and then a dark chocolate bar carries milk protein onto the dark chocolate. The control is to clean surfaces between products, to use separate boards for allergen foods, and to plan the order of work so that foods without allergens are made before foods with allergens, when that is possible.
Air is a route people often forget. Flour dust rises when flour is tipped into a mixer, and wheat flour dust can settle on foods, surfaces, and clothes across a room. Spray drying, sieving, and pouring powders all throw fine particles into the air. A factory that makes a wheat product and a wheat-free product in the same open room will struggle to keep the wheat-free product free of wheat, however careful the workers are. The controls are to handle powders in closed systems where possible, to keep allergen powders in a separate area, to clean dust from surfaces before making the next product, and to change outer clothing that has picked up dust before moving to another area.
Liquids carry allergens too. Fryer oil that fried a nut-coated food carries nut protein to the next food fried in the same oil. Water used to wash vegetables after it washed fish carries fish protein. A sauce that was stirred with a spoon that stirred a peanut sauce carries peanut protein. Brine, marinade, and batter that are reused carry whatever was dipped in them before. The rule is that a liquid used for an allergen food is an allergen liquid, and it is never reused for a food that must be free of that allergen.
Shared equipment: the hardest places
Shared equipment is where cross-contact is hardest to control, because the equipment has joints, pipes, sieves, and dead spaces where food and protein can hide. A mixer has a bowl, a beater, and a guard, and protein can sit behind the guard and under the beater hub. A mincer has a screw and a plate with small holes that trap food. A filler has pipes and valves that hold product after the run ends. A sieve holds fine particles in its mesh. A chocolate line has tanks, pipes, and moulds that are hard to reach. Each piece of equipment needs a written cleaning method that names every part to be taken apart, every surface to be washed, and the order in which to do it.
The order of production is a powerful control, and it costs nothing. Foods without allergens are made first, when equipment and surfaces are cleanest. Foods with one allergen are made next, and foods with several allergens are made last. After an allergen run, the line is cleaned before the next product. This order is called sequencing, and it is used in factories, bakeries, and large kitchens. A small bakery can use it too: plain loaves first, then milk bread, then nut bread, with cleaning between each. Sequencing does not remove the need for cleaning, but it means that any protein left behind moves from a less risky product to a more risky one, not the other way round.
Rework is a quiet route for cross-contact. Rework is food that is put back into production: trimmings, broken biscuits, dough offcuts, chocolate that did not set, and product returned from a line. Rework carries the allergens of the product it came from into the product it joins. A batch of plain biscuits that takes in rework from a nut biscuit batch is no longer plain. The control is to keep rework labelled with its allergens, to use it only in a product that already contains those allergens, and to record where every lot of rework went. Rework with unknown allergens is not used at all.
Cleaning that removes protein
Cleaning for allergens is not the same as cleaning for appearance. A surface can look clean and still carry protein, because protein is invisible in the thin film left after wiping. Cleaning that removes protein has a set order: remove loose food by scraping or brushing, wash with hot water and detergent, scrub every surface including joints and undersides, rinse with clean water, and let the surface dry or sanitise as the method requires. Detergent matters, because protein sticks to surfaces and needs detergent to lift it off. Water alone, or a dry wipe, does not do the job. Sanitiser alone does not do it either: sanitiser kills germs but does not remove protein, so a surface that is sanitised but not washed can be germ-free and still carry allergen.
The hardest places to clean are the ones that cannot be seen: the inside of a pipe, the joint of a mixer, the mesh of a sieve, the seal of a tank. Those places need the equipment to be taken apart as far as the cleaning method allows, and they need a check after cleaning. The check can be a visual check with a torch, a swab test that detects protein, or a test of the first product made after cleaning. A factory that relies on "it looked clean" is relying on the weakest check there is. A factory that swabs, records the result, and holds the first product until the result is known has a control it can defend.
Cleaning tools can spread allergens too. A cloth used to wipe a nut surface and then a plain surface moves nut protein to the plain surface. A brush used on a milk line and then on a soy line moves milk protein. The fix is to keep cleaning tools separate by area or by allergen, to colour code them, and to wash them after use. Mops, cloths, and brushes are tools like any other, and they need the same discipline as knives and scoops.
Storage and handling: keeping allergens apart
Cross-contact starts in the store, before any cooking begins. Allergens stored above other foods can spill or leak down onto them. A torn bag of peanut flour stored above a bag of rice flour can dust the rice flour below. An open container of sesame seeds can spill into the container below it. The rule is to store allergens below other foods, or in a separate area, in sealed and labelled containers, so that a spill cannot fall onto a food that must stay free of that allergen. Liquids are stored below dry goods, and powders are stored in closed containers, never open sacks.
Handling adds more routes. A scoop kept in a bin of peanut flour and then used in a bin of plain flour moves peanut into the plain flour. A hand that reaches into a nut container and then into a plain container does the same. The control is one scoop per container, kept in the container, and hands that are washed before reaching into any container. Labels matter here too: a container with a faded label, or a container that was refilled with a different ingredient without changing the label, is a cross-contact waiting to happen. Every container carries the name of its contents and its allergens, and the label is changed the moment the contents change.
People themselves carry allergens on clothes and aprons. Flour dust settles on a baker's apron, and the apron then brushes against a tray of plain biscuits. A worker who handled nuts and then moves to a nut-free line carries nut protein on hands and clothing. The controls are to change aprons and wash hands when moving between allergen work and other work, to keep outer clothing out of production areas where possible, and to clean up dust at once rather than letting it settle and spread. These are small habits, and they are the habits that decide whether a factory is safe or only looks safe.
The diagram shows the order of controls. The steps point to the diagram: no single step is enough on its own, and the record at the end is what lets a manager prove the earlier steps happened.
Checking that the controls work
A control that is not checked is a hope, and hope is not a control. Cross-contact controls are checked in three ways. The first is observation: a manager watches the work and notes whether hands are washed, whether tools are kept apart, and whether the order of work is followed. The second is testing: swab tests that detect protein on a surface after cleaning, and tests on the first product after a changeover, give a number that can be compared with a limit. The third is the record: the cleaning log, the production order, and the test results together show whether the controls were done and whether they worked, on each day and each line.
When a check fails, the response matters more than the failure. A failed swab means the line is cleaned again, the cleaning method is looked at, and the product made since the last good check is held until it is judged. A worker who reports a mistake, such as using the wrong scoop, is thanked, not punished, because a mistake that is reported can be fixed, while a mistake that is hidden becomes an incident. A business that punishes honest reports will stop hearing about mistakes, and will learn about them instead from a customer reaction. That is the most expensive way to learn.
What cross-contact means for the label
Cross-contact shapes what a label can honestly say. A product that is made on a line shared with nuts may carry a warning such as "may contain nuts", but that warning is not a substitute for controls. It is a statement that, after all controls, a small risk remains that cannot be removed. A business that puts "may contain" on every product, without controls behind it, is not managing risk: it is passing the risk to the customer and shrinking the range of foods allergic customers can eat. The right use of such a warning is narrow: it follows a proper assessment of the risk, it names the allergen, and it is used only where the risk is real and cannot be removed by cleaning and separation. Unit 4 looks at labelling in full, including when such a warning is honest and when it is not.
ATP tests and protein swabs: two different checks that are often mixed up
After cleaning, a factory checks the surface in one of two ways, and the two ways answer different questions. A protein swab test looks for protein on the surface, and it is the test that speaks to the allergen, because the allergen is a protein. A swab is rubbed over the surface, a chemical is added, and a colour change shows whether protein is present, and roughly how much. An ATP test looks for ATP, a molecule that is present in all living cells and in food residues, and it is the test that speaks to general cleanliness, not to one allergen. A swab is rubbed over the surface, the ATP is read by an instrument, and a number, in light units, shows how much residue is there. A surface can be clean of ATP and still carry allergen protein, if the protein came from a source with little ATP in it, and a surface can carry ATP from a food that has no allergen in it, and give a high ATP reading with no allergen risk at all.
That difference decides which test to use for which job. To check general cleaning, such as whether a surface was scrubbed and rinsed, an ATP test is fast and useful, and it gives a number in seconds that a worker can act on at once. To check allergen cleaning, such as whether peanut protein is gone after cleaning, a protein swab, or a test on the first product, is the right check, because only a test that looks for the allergen protein can say whether the allergen is gone. A factory that uses only ATP tests to prove allergen cleaning has proved that the surface is generally clean, not that it is free of the allergen, and a manager who accepts an ATP result as an allergen result has accepted the wrong evidence. The two tests are used together: ATP for the daily check that cleaning happened, and protein swabs or first-product tests for the check that allergen cleaning worked, with the limits for each one written down, and the action for a failed result written down beside it.
A worked example shows the two tests side by side, with round teaching numbers only. Suppose a mixer is cleaned after a milk run. An ATP test gives a reading of 20 light units, where the factory limit is 50, so the ATP check passes. A protein swab gives a strong colour change, showing protein is still present, so the protein check fails. The mixer is cleaned again, and this time the ATP reading is 15 and the protein swab is negative. The lesson is that the two tests disagreed, and the disagreement was the information: the first clean removed the general residue but left milk protein behind, in a joint or a seal that the first clean did not reach. A factory that had run only the ATP test would have started the next run with milk protein still on the mixer.
Practical note: Walk your own kitchen or line with a notebook and follow one allergen, such as peanut, from the store to the plate. Write down every surface, tool, hand, and liquid it touches, and every place it could move to another food. That walk will show you more about cross-contact in one hour than a week of reading, and the list you write becomes the cleaning and separation plan for that allergen.
Quick self-check
Question: Why does sanitiser alone not remove an allergen from a surface?
Because sanitiser kills germs but does not lift protein off a surface. Allergen protein stays in a thin film after sanitising, so the surface can be germ-free and still carry enough protein to cause a reaction. Protein is removed by washing with detergent and water, with scrubbing, and then rinsing.
Question: A factory makes a plain product first, then a nut product. Why is that order safer than the reverse?
Because any protein left behind after the plain run moves into the nut product, which already contains nuts, while protein left behind after a nut run would move into the plain product, which should be nut-free. Sequencing puts the cleanest work first and the allergen work last, with cleaning between runs.
Try it yourself
Make a sandwich in your kitchen, then make a second sandwich for a friend who is allergic to peanut, using the same knife, board, and plate, wiping each between sandwiches. Now list every point where peanut protein could have moved: the knife, the board, the plate, your hands, the butter, the bread bag. Then repeat the task properly: wash the knife and board with detergent and water, wash your hands, use fresh bread from a new bag, and use a clean plate. Write down what changed, and how long the proper way took compared with the quick wipe. That time is the true cost of safe allergen handling.
Key ideas to carry forward
- Cross-contact is the transfer of allergen protein from one food, surface, tool, hand, or liquid to another food, and it can happen even when the recipe is correct.
- Protein is invisible, survives cooking, and is not removed by wiping, by water alone, or by sanitiser: only washing with detergent and scrubbing removes it.
- Hands, tools, surfaces, air, liquids, and shared equipment are the main routes, and each needs its own control.
- Sequencing, making foods without allergens first and allergen foods last, with cleaning between runs, is a powerful control that costs nothing.
- Rework carries the allergens of the food it came from and must only join a product that already contains those allergens.
- Storage must keep allergens below other foods, in sealed and labelled containers, with one scoop per container.
- Controls must be checked by observation, swab testing, and records, and a failed check must lead to re-cleaning and holding the product.
Glossary
Cross-contact
The transfer of an allergen from one food or surface to another food that should not contain it. Food tech example: peanut butter left on a knife spreads peanut protein to the next sandwich.
Cross-contamination
The transfer of germs or other harmful matter from one food or surface to another. Food tech example: raw chicken juice on a board spreads germs to salad, and cooking kills the germs, unlike allergen protein.
Sequencing
Planning the order of production so foods without allergens are made first and allergen foods last, with cleaning between runs. Food tech example: a bakery makes plain loaves first, then milk bread, then nut bread.
Rework
Food put back into production, such as trimmings, broken biscuits, or dough offcuts. Food tech example: broken nut biscuits used as rework carry nut allergen into the next batch.
Swab test
A test in which a swab is wiped over a surface after cleaning and tested for protein, to check that cleaning removed the allergen. Food tech example: a swab of a mixer bowl after cleaning shows whether peanut protein is still present.
Detergent
A cleaning substance that lifts grease and protein off surfaces so they can be rinsed away. Food tech example: detergent and hot water wash milk protein off a cheese vat.
Sanitiser
A substance that kills germs on a clean surface, used after washing, not instead of it. Food tech example: sanitiser is applied to a washed worktop to kill remaining germs, but it does not remove allergen protein.
Colour coding
Using different colours for tools, boards, and cleaning equipment to keep allergen work apart from other work. Food tech example: red-handled scoops are used only for nut ingredients, so they are never mixed up with plain scoops.
Changeover
The change from making one product to making another on the same line, including cleaning and checking between the two. Food tech example: the changeover from a milk chocolate run to a dark chocolate run includes cleaning and a swab test.
Dead space
A part of equipment, such as a pipe joint or valve, where food can sit and escape cleaning. Food tech example: protein hides in the dead space behind a filler valve and appears in the next product.
Fryer oil
Oil used for frying, which can carry allergen protein from one food to the next food fried in it. Food tech example: oil that fried nut-coated chicken carries nut protein to chips fried in the same oil.
Protein film
A thin, invisible layer of protein left on a surface after wiping, which can still cause a reaction. Food tech example: a wiped board looks clean but carries a protein film from fish.
Allergen map
A plan that shows where each allergen is stored, used, and could travel in a kitchen or factory. Food tech example: the allergen map for a bakery marks the nut store, the nut line, and every shared surface.
First product test
Testing the first product made after cleaning, to check that no allergen carried over from the previous run. Food tech example: the first biscuits after a nut run are tested for peanut protein before the batch is released.
Separate storage
Keeping allergen ingredients apart from other ingredients, below them or in a separate area, in sealed labelled containers. Food tech example: peanut flour is stored below rice flour in a sealed container so a spill cannot fall onto the rice flour.
ATP test
A test that measures ATP, a molecule in all living cells and food residues, to check general cleanliness. Food tech example: an ATP test on a cleaned mixer shows whether general residue is gone, but it cannot say whether allergen protein is gone.
Protein swab
A swab test that looks for protein on a surface, used to check whether allergen cleaning worked. Food tech example: a protein swab on a mixer after cleaning shows whether milk protein is still present.
References
- Taylor, S. L. and Hefle, S. L., Food Allergies and Intolerances, 2005.
- Food and Agriculture Organization, Food Allergies, 2021.
- Mortimore, S. and Wallace, C., HACCP: A Practical Approach, 3rd edition, 2013.
- Jackson, L. S., Food Allergen Management, 2013.
- Food and Drink Federation, Guidance on Allergen Management, 2019.
Unit 4: Allergen Labelling: What Must Be Declared
Note
Unit 4: Allergen Labelling: What Must Be Declared
A question to start with
A shopper with milk allergy picks up a chocolate bar. The front of the pack says "dark chocolate" and shows a picture of cocoa beans. The ingredient list on the back says "cocoa mass, sugar, cocoa butter, emulsifier (soy lecithin)". There is no word "milk" anywhere. She eats the bar, and reacts. Later, the maker explains that the bar was made on a line shared with milk chocolate, and that the words "may contain milk" were printed on the pack, in small letters, below the ingredient list, where she did not see them. The bar was not lying. It was not telling the truth clearly enough. This unit is about how allergen labelling should work: what must be declared, how it must be shown, and why a label that is hard to find is almost as bad as no label at all.
A label is the main way a maker talks to a buyer who cannot ask a question. In a shop, the buyer cannot ask the cook what went into a food. The label must answer for the cook. For an allergic buyer, the label is not marketing. It is safety information, and it must be correct, complete, and easy to find. A mistake on a label can send a safe food back to the shelf, or worse, can send an unsafe food into the hands of a person it can harm. That is why labelling is treated in most systems as a legal duty, not a courtesy.
Questions to think about
- Why is "may contain milk" in small print below the ingredient list a weak warning, even if it is true?
- A recipe changes and milk powder is added. What must happen before the new batch reaches the shops?
- If a food is sold loose, with no pack, how does the buyer learn about its allergens?
Think about the chocolate bar before you read on
Because the warning was hard to find, easy to miss, and placed where a buyer looking at the ingredient list would not expect it. A good warning sits with the allergen information, in the same place every time, in type that can be read, and it names the allergen clearly. A warning that is true but hidden does not protect the buyer who never sees it.
What must be declared: the general picture
Most systems around the world require the major allergens to be declared when they are used as ingredients, and the lists are similar even though they are not identical. The commonly listed ones include peanut, tree nuts, milk, egg, wheat and other gluten cereals, soy, fish, shellfish, sesame, and in some systems celery, mustard, lupin, and sulphur dioxide used as a preservative. The reader should check the current list in their own country, because the list can change: sesame was added to the list in some places in recent years, and other foods may follow as evidence grows. This unit names the commonly listed ones as examples, and the rule underneath them is the same everywhere: if a major allergen is in the food, the buyer must be told, clearly and in words they can understand.
Declaration covers the allergen itself and foods made from it. Milk must be declared when milk, butter, cheese, cream, whey, or casein is used. Egg must be declared when egg, egg white, egg yolk, or dried egg is used. Wheat must be declared when wheat flour, wheat starch, or wheat gluten is used. Soy must be declared when soy flour, soy sauce, tofu, or soy lecithin is used. Fish must be declared when fish, fish sauce, or fish stock is used. The form of the ingredient does not remove the duty: an allergen that has been dried, powdered, or refined is still an allergen, and it must still be declared, unless the system in that country has a specific exemption for a highly refined form, which the maker must check before relying on it.
Declaration also covers allergens that arrive through other ingredients. A spice mix that contains wheat flour carries wheat into the food it seasons. A chocolate that contains soy lecithin carries soy into the chocolate. A sauce that contains fish sauce carries fish into the sauce. The maker must therefore know the allergens in every ingredient, including compound ingredients, and must declare them all. That knowledge comes from supplier statements, which the maker collects and keeps for every ingredient, and from a recipe record that lists every ingredient in full. A maker who does not know what is in a spice mix cannot label the food it seasons.
How allergens must be shown on the pack
Most systems require allergens to be shown in a way that stands out from the rest of the ingredient list. Common ways are bold type, a different colour, a capital letter style, or a separate "Contains" statement next to the ingredient list, such as "Contains: milk, egg, wheat". The purpose is the same: a buyer who is scanning a pack in a shop must be able to find the allergens quickly, without reading every word of a long list. A label that hides the allergen in the middle of a list, in the same type as everything else, fails that purpose, even if the word is technically present.
The name used must be a name the buyer recognises. "Casein" on its own does not tell a buyer that the food contains milk, unless the word milk appears with it, so good labels say "casein (milk)" or list milk in the "Contains" statement. "Whey" on its own does not say milk. "Lecithin" on its own does not say soy. "Tahini" on its own does not say sesame. The rule is to use the plain name of the allergen, the name an ordinary buyer knows, and to put it where the buyer will see it. Trade names, chemical names, and Latin names have their place in a specification, but the pack is not a specification. It is a message to a person in a shop.
The "Contains" statement, where it is used, must match the ingredient list. If the ingredient list shows egg and the "Contains" statement does not mention egg, the label is wrong, and a buyer who reads only the "Contains" statement will be misled. If the "Contains" statement mentions an allergen that is not in the ingredient list, the label is also wrong, and a buyer may avoid a safe food for no reason. Both errors come from the same cause: the label was written from a different version of the recipe from the one that was made. The fix is a single source of truth: one recipe record, one label, and a check that ties them together before every print run.
Precautionary warnings: "may contain"
A precautionary warning, such as "may contain nuts" or "made in a factory that also handles milk", is a statement about cross-contact risk, not about the recipe. It says that, after all controls, a small risk remains that the food may contain an allergen it should not contain. Such a warning is honest only when three things are true: the risk has been properly assessed, the risk is real and cannot be removed by cleaning and separation, and the warning names the allergen. A warning that is put on every product without an assessment, or that says "may contain traces of nuts" on a product made on a line that never handles nuts, is not honest. It shrinks the range of foods an allergic buyer can eat, and it teaches buyers to ignore warnings, which makes the honest warnings less effective too.
The words used for the warning matter. "May contain" is the common form. Phrases such as "made in a factory that also handles" and "made on a line that also handles" give more information, and the more precise form is better, because it tells the buyer where the risk comes from. Vague phrases such as "may contain traces" are less useful, because they do not say how much, or from where, and they can be read as meaning either a tiny risk or a large one. The best warnings are specific, short, and placed with the allergen information, in the same place on every pack, so the buyer knows where to look.
A precautionary warning is never a substitute for controls. A maker who puts "may contain nuts" on a product and then makes no effort to clean the line has not managed the risk. The warning is the last step, after sequencing, cleaning, separation, and checking, and it covers the risk that remains after those steps. A maker who uses the warning as the first and only step is passing the risk to the customer, and an inspector who finds that will ask hard questions about the controls behind the label.
Loose foods, menus, and spoken information
Not all food is sold in a pack. Bread in a bakery, dishes in a restaurant, salads in a deli, sweets in a market, and meals in a school or hospital are sold loose, and the buyer cannot read a pack. In those settings, the allergen information must be given in another way: on the menu, on a sign at the counter, in a folder the customer can ask for, or by a server who knows the answer. Most systems require that the information be available and accurate, and that the customer can get it before they order, not after they have eaten.
The record behind the spoken answer is the recipe file. A server who answers from memory is guessing, however good their memory is, because recipes change and memory does not update itself. A server who answers from a current recipe file, or from an allergen matrix that lists every dish and every allergen in it, is giving information that can be checked. The allergen matrix is a table: dishes down one side, allergens across the top, and a mark where a dish contains an allergen. It is kept where servers can see it, it is updated the day a recipe changes, and it is the single source of truth for spoken answers. A business that keeps its matrix in a drawer and never updates it has a decoration, not a control.
Menus need the same care. A menu that marks dishes with symbols for allergens, or that carries a note saying "please tell us about allergies, and ask for the allergen folder", gives the customer a way in. A menu that says nothing, and a server who says "everything is fine" without checking, leaves the customer to guess. The customer who lives with allergy is used to asking, and a business that welcomes the question and answers it well earns a customer for life. A business that treats the question as a nuisance loses that customer, and may lose them in a more serious way.
When a recipe or supplier changes
A label is only as good as the recipe it was written from, and recipes change. A supplier changes a spice mix. A buyer finds a cheaper flour. A cook adds milk powder to improve a dough. A factory changes its oil blend. Each change can add an allergen, remove one, or change the cross-contact risk, and each change must be followed by a label check before the new batch is sold. The check is simple: read the new recipe, list its allergens, compare the list with the label, and change the label if the lists differ. The discipline is to do it every time, without exception, and to hold the product until the check is done.
Supplier changes are the hardest to catch, because they happen outside the business. A supplier may change a recipe without telling the buyer, or may change a factory and add a new allergen to the line. The defence is to ask suppliers for an allergen statement for every ingredient, to ask again when a supplier changes anything, and to treat any ingredient without a current statement as unknown. An unknown ingredient is not used in a product that claims to be free of an allergen, and it is not used at all until its allergens are known. That rule feels strict, and it is meant to be, because the alternative is a label written on a guess.
The diagram shows the labelling chain. The steps point to the diagram: the second-person check and the change rule are the two steps that catch most labelling errors, and both are cheap compared with a recall.
Labelling errors and what they cause
Labelling errors are one of the most common causes of food recalls around the world, and the pattern is always the same: a recipe changed and the label did not, a supplier changed and nobody noticed, a label was written from the wrong version of the recipe, or a translation dropped an allergen. The food itself is often perfectly made. The label is wrong, and the wrong label makes a safe food dangerous for the person who trusts it. Unit 6 looks at recalls in full, but the labelling lesson is worth stating here: most labelling errors are not caused by a lack of knowledge. They are caused by a lack of a check at the point where the recipe and the label meet.
The cost of a labelling error is high. The product must be withdrawn from shops, customers must be warned, stock must be destroyed or relabelled, and the business must explain what happened to inspectors and to the public. The cost in trust is higher still: an allergic customer who trusted a label and reacted will not trust that brand again, and will tell other allergic families about it. A business that checks its labels twice, with a second person, and that holds a product until the check is done, spends a little time and saves a great deal of both money and trust.
Reading a label as a buyer
A buyer with an allergy reads a label in a set order, and food workers should know that order so they can write labels that serve it. First, the buyer looks for the allergen information: the "Contains" statement, or the bold words in the ingredient list. Second, the buyer reads the full ingredient list, looking for the allergen in compound ingredients and in words such as whey, casein, or lecithin. Third, the buyer looks for a precautionary warning, and judges whether the risk it describes is one they can accept. Fourth, the buyer checks the pack for a different reason: a pack that looks different from last time may carry a new recipe, so a careful buyer reads the label every time, even for a food bought every week. A maker who changes a recipe and keeps the same pack design must make the label change visible, because a buyer who trusts the familiar pack may not read the small print again.
Labelling online and on delivery apps: where the pack is not in the customer's hand
When a customer buys food online or through a delivery app, the pack is not in their hand when they choose, and the label cannot do its usual job. The allergen information must therefore be given at the point of ordering, on the screen, before the customer pays, and it must match the information on the pack that arrives. A menu on a website or an app that lists a dish with no allergen information, or with a note that says "ask the restaurant", has left the customer to guess, and a customer who guesses wrong is a customer who reacts. The information on the screen must name the allergens in each dish, in the same words as the pack, and it must be updated the day a recipe changes, because a screen that is out of date is worse than no screen, as it gives a false sense of safety.
The chain from screen to kitchen to door has three places where the information can be lost. The first is the screen itself: a dish that is listed under one name on the app and another name in the kitchen, or a dish whose allergen note is hidden behind a click the customer never makes, will be ordered without the customer knowing what is in it. The second is the kitchen: an order that arrives as a line of text, with an allergy note in a comment box, can be missed if the note is not printed on the kitchen ticket in a place the cook will see, in words the cook will read. The third is the pack and the delivery: a bag that is not labelled with the allergy, or that is packed with another order, or opened and swapped by a driver, loses the information on the way to the customer. Each of these is fixed by the same rule as in the restaurant: the allergen information travels with the order, in writing, at every step, from the screen to the ticket to the bag, and the bag is marked with the allergy so that no one who handles it can miss it.
A delivery order with an allergy note is treated exactly as a table order with an allergy: clean tools, fresh preparation, and a check before the bag is sealed. The driver is told that a bag marked with an allergy must not be opened, swapped, or mixed with another order, and the customer is told, on the bag, what the allergy was and what was done about it. The business keeps a record of online orders with allergy notes, so that a complaint can be traced to the order, the ticket, and the kitchen, and so that a pattern, such as a dish that is often ordered with an allergy note, can be seen and the dish can be made safer. An online sale is not a sale without a customer in the room. It is a sale where the customer is further away, and the information must travel further, and the care must be greater.
Practical note: Once a month, take five packs from your own shelves and check each label against its recipe file, as a buyer would: find the allergens in under ten seconds, read the full list, and check the precautionary warning. If you cannot find the allergens in ten seconds, the label needs to be clearer. If the label and the recipe do not match, hold the product and fix the label before it is sold.
Quick self-check
Question: Why must a label say "casein (milk)" rather than only "casein"?
Because many buyers do not know that casein is a milk protein. The plain name of the allergen, milk, must appear so an ordinary buyer can recognise it at once. The same applies to whey, which must be shown as milk, and to lecithin, which must be shown with its source, such as soy.
Question: A supplier changes a spice mix without telling you. How could you catch it before the label becomes wrong?
By asking suppliers for a current allergen statement for every ingredient, by asking again whenever anything changes, and by treating any ingredient without a current statement as unknown. A change in taste, colour, or behaviour of the mix is also a signal to ask the supplier what changed.
Try it yourself
Take five packaged foods from your kitchen and time yourself finding the allergens on each pack. Note how many seconds it took, where the allergen information was placed, whether the allergens stood out in bold or in a "Contains" statement, and whether any allergen was hidden inside another ingredient name. Then write a one-line verdict for each pack: clear, hard to find, or misleading. If you find a pack where the allergen is hard to find, write out how you would redesign the label to make it clear.
Key ideas to carry forward
- Most systems require the major allergens to be declared when they are used as ingredients, and the reader must check the current list in their own country.
- Allergens must be declared in every form, including dried, powdered, and compound ingredients such as spice mixes and sauces.
- Allergens must stand out on the pack, in bold or in a "Contains" statement, using plain names a buyer recognises, such as milk with casein.
- A precautionary warning such as "may contain" is honest only after a proper risk assessment, and only where a real risk remains after controls.
- Loose foods need allergen information too, given on menus, signs, or in a folder, and spoken answers must come from a current recipe file or allergen matrix.
- Every recipe or supplier change must be followed by a label check before the new batch is sold, and a second person should check the label.
- Labelling errors are a leading cause of recalls, and most are caught by a simple check where the recipe and the label meet.
Glossary
Compound ingredient
An ingredient made of more than one part, such as a spice mix or a chocolate, whose parts must all be considered for allergens. Food tech example: a spice mix is a compound ingredient that may carry wheat flour into a sausage.
Contains statement
A short statement next to the ingredient list naming the allergens in the food, such as "Contains: milk, egg, wheat". Food tech example: the Contains statement on a biscuit pack lets a buyer find the allergens in seconds.
Precautionary warning
A statement such as "may contain nuts" warning that a food may contain an allergen through cross-contact, even though it is not in the recipe. Food tech example: a dark chocolate bar carries a may contain milk warning because it shares a line with milk chocolate.
Allergen matrix
A table listing every dish or product and every allergen in it, used to answer customer questions accurately. Food tech example: a restaurant allergen matrix shows which dishes contain egg, milk, or peanut.
Supplier statement
A written statement from a supplier listing the allergens in an ingredient and the allergens handled in the supplier's factory. Food tech example: the supplier statement for a spice mix shows it contains wheat flour.
Ingredient list
The list on a food pack naming every ingredient in the food, in order of amount. Food tech example: the ingredient list on a cake shows flour, sugar, egg, and butter in order.
Emulsifier
A substance that helps mix oil and water in a food, such as lecithin in chocolate. Food tech example: soy lecithin is an emulsifier in chocolate and must be declared as soy.
Loose food
Food sold without a pack, such as bread in a bakery or a dish in a restaurant. Food tech example: a cake sold loose in a bakery needs allergen information on a sign or in a folder.
Trace
A very small amount of a substance, which can still be enough to cause an allergic reaction. Food tech example: a trace of peanut protein on a shared spoon can cause a reaction in a sensitive person.
Second-person check
A check of a label or record by a second person, different from the one who wrote it, to catch errors. Food tech example: a second worker checks the new biscuit label against the recipe before it is printed.
Recipe file
The current written record of a recipe, listing every ingredient and its amount, used as the source for labels and spoken answers. Food tech example: the recipe file for a soup lists every ingredient, so the server can answer allergy questions from it.
Single source of truth
One record that all labels, menus, and answers are drawn from, so they cannot disagree with each other. Food tech example: the recipe file is the single source of truth for the pack label and the restaurant menu.
Allergen declaration
The act of stating on a label or menu that a food contains a particular allergen. Food tech example: declaring milk on a chocolate bar tells milk-allergic buyers not to eat it.
Exemption
A specific case in a set of rules where a food or a highly refined form does not need to be declared, which must be checked before it is relied on. Food tech example: some systems exempt a highly refined oil from declaration, but the maker must confirm the exemption applies.
Relabelling
Putting a corrected label on a product after an error is found, or withdrawing the product if relabelling is not possible. Food tech example: biscuits with the wrong label are relabelled with the correct allergens before they return to sale.
References
- Food and Agriculture Organization, Food Allergies, 2021.
- Taylor, S. L. and Hefle, S. L., Food Allergies and Intolerances, 2005.
- Food and Drink Federation, Guidance on Allergen Management, 2019.
- Jackson, L. S., Food Allergen Management, 2013.
- Food Marketing and Labelling, Advances in Food and Beverage Labelling, 2014.
Unit 5: Allergen Control in the Factory: Cleaning, Segregation, Validation
Note
Unit 5: Allergen Control in the Factory: Cleaning, Segregation, Validation
A question to start with
A factory makes two products on one line: a plain oat biscuit in the morning and a peanut biscuit in the afternoon. The line is cleaned between the two runs, the cleaning is written down, and the plain biscuits are tested and found free of peanut. The next week, the factory adds a third product, a hazelnut biscuit, and the manager asks a simple question: does the same cleaning work for hazelnut, and does the order of the three runs still keep the plain biscuit safe? The answer is not a guess. It is a plan, a cleaning method, a check that the cleaning worked, and a record that proves it. This unit is about building that plan inside a factory, step by step.
A factory is a system, and allergen control in a factory is a system too. It starts before any ingredient arrives, with buying and supplier checks. It runs through storage, weighing, mixing, cooking, packing, and dispatch. It ends with a product that matches its label and a record that proves every step happened. The system has a name in food safety work: an allergen management plan, often written as part of the factory's wider food safety plan. The plan names every allergen handled, every place it could move, every control that stops it moving, and every check that proves the control worked. Without the plan, allergen control is a set of good habits that depend on who is on shift. With the plan, it is a system that works whoever is on shift.
Questions to think about
- A factory makes five products with different allergens on one line. What decides the order they are made in?
- Cleaning removed all visible food from a mixer. Why might the next product still be unsafe?
- A swab test after cleaning shows protein is still present. What should happen next?
Think about the visible cleaning question before you read on
Because protein hides in places that cannot be seen: behind guards, inside pipes, in joints, in sieve mesh, and in scratches. Visible cleaning removes what the eye can see, and allergen cleaning must also reach the hidden places, by taking equipment apart as far as the method allows, and then checking with a swab test or a first-product test, not only by looking.
The allergen management plan
The plan starts with a map. List every product the factory makes, every ingredient in each product, and every allergen in each ingredient. Then list every place each allergen is stored, weighed, mixed, cooked, packed, and dispatched, and mark where it could move to another product. That map shows the factory as an allergen would see it: not as departments and lines, but as routes along which protein can travel. The map is drawn on paper, kept where managers can see it, and updated whenever a product, a recipe, a supplier, or a line changes.
From the map, the plan names the controls. A control is a step that stops an allergen moving, or that finds it if it has moved. Controls fall into a few groups: buying controls, such as supplier statements and checks on delivery; storage controls, such as separate areas and sealed labelled containers; production controls, such as sequencing, dedicated equipment, and separate tools; cleaning controls, such as a written cleaning method and a check after cleaning; and people controls, such as training, hand washing, and changing clothing between areas. Each control has a person responsible for it, a way of doing it, and a record that shows it was done. A control with no named person and no record is a wish, not a control.
The plan also names the checks that prove the controls work. A check can be a visual look, a swab test, a test on the first product after a changeover, or a review of records. The plan says how often each check happens, what result is acceptable, and what happens when the result is not acceptable. The last part matters most: a plan that says what to do when a check passes, but not what to do when it fails, is only half a plan. The failure response must be written down before the failure happens, so that the worker on the night shift does not have to invent it at midnight.
Buying and receiving: the first control point
Allergen control starts with buying, because a factory can only control what it knows it has bought. Every ingredient is bought against a specification that names its allergens, and every delivery is checked against that specification. The check is not only about the ingredient itself: the supplier's factory may handle other allergens, and the supplier's statement should say which ones, and what controls the supplier uses. A spice mix that contains no allergen itself may be made on a line that handles peanut, and the buyer needs to know that before deciding whether to use it.
Deliveries are checked on arrival. The label on the delivery must match the order, the allergen statement must be current, and the packaging must be intact. A torn bag of peanut flour is not accepted, because the flour may have spread to other bags on the same pallet. A delivery with a label that does not match the order is held, not used, until the supplier explains it. The receiving record notes the supplier, the lot, the date, and the allergen check, so that any product made from that delivery can be traced back to it. That trace is what lets a factory find every product made from a bad delivery, if a problem is found later.
New suppliers and new ingredients need a fuller check before they are used. The factory asks for the allergen statement, for the supplier's food safety record, and, where the risk is high, for a sample to be tested. A new ingredient is not used in a product that claims to be free of an allergen until its allergens are known and the claim still holds. The buying team, the technical team, and the production team all sign off on a new ingredient, so that no one person can introduce an allergen into the factory on their own.
Storage and segregation
Segregation means keeping allergens apart from other foods, so they cannot move by accident. In the store, allergens are kept in a marked area, or below other foods, in sealed and labelled containers. Spills are cleaned at once, and the cleaning is recorded. Liquids are stored below dry goods. Powders are kept in closed containers, never in open sacks, because powder spreads in air and settles on everything nearby. Each container carries the name of its contents and its allergens, in writing that can be read from a distance, and the label is changed the moment the contents change.
Weighing is a place where segregation often fails. A small amount of an allergen ingredient is weighed out, a little spills on the bench, and the next ingredient is weighed on the same bench. The control is to weigh allergen ingredients in a separate area or at a separate time, to clean the bench and the scales between ingredients, and to use a dedicated scoop for each ingredient, kept in its container. The weighed ingredient is labelled with its name, its allergens, and the product it is for, before it leaves the weighing area, so that a tub of white powder cannot be mistaken for another white powder on the way to the mixer.
People move between areas, and they carry allergens with them. A worker who weighs peanut flour and then walks to a plain line carries peanut dust on hands, apron, and shoes. The control is to wash hands and change outer clothing when moving between allergen work and other work, and to keep traffic in one direction where possible, from clean areas to allergen areas, not the other way round. Doors, colour-coded clothing, and signs at area entrances help, but the habit is what matters: a worker who knows why the rule exists will follow it when no one is watching, and a worker who does not know why will find a shortcut.
Production controls: sequencing and dedicated equipment
The order of production, sequencing, was introduced in Unit 3, and in a factory it is planned in writing, not left to the shift. The production plan lists the products for the day in order, from the product with the fewest allergens to the product with the most, and it names the cleaning step between each run. The plan is posted where the line team can see it, and a change to the plan needs a manager's agreement, because a change to the order can change the risk. A rush order that jumps the queue can undo a day of careful sequencing, so the rule is that no order jumps the queue without a fresh risk check.
Dedicated equipment is the strongest production control, and it is used where the risk is highest. A dedicated line makes only one product, or only products with the same allergens, so cross-contact cannot happen on that line. A dedicated mixer, filler, or packing machine is used only for one allergen, or only for products free of that allergen. Dedicated equipment costs money and floor space, so it is used where it matters most: for peanut, where the risk is high and the allergen is hard to clean, and for products that claim to be free of an allergen, where the claim must be protected. Where equipment is shared, the cleaning method and the check after cleaning carry the weight instead, and they must be strong enough to carry it.
Tools and utensils follow the same logic. Each line has its own set of scoops, scrapers, and brushes, colour coded and stored on a shadow board, a board with the outline of each tool drawn on it, so a missing tool is seen at once. A tool found on the wrong line is cleaned before it is used again, and the finding is recorded. Small tools are easy to lose and easy to mix up, and the shadow board is a cheap answer to both problems.
Cleaning methods and validation
A cleaning method is a written set of steps for one piece of equipment, naming what to take apart, what detergent to use, how hot the water should be, how long to scrub, and how to rinse and dry. It is written for the person who will do the cleaning, in plain words, with pictures where they help. It is not a general note saying "clean the mixer". It says: remove the guard, remove the beater, scrape the bowl, wash with detergent at a stated temperature, scrub the hub and the joint, rinse, dry, and reassemble. Each step is checked off as it is done, and the check list is signed.
Validation is the proof that the cleaning method works. It is done when the method is first written, and again when anything changes: a new product, a new allergen, a new detergent, or a new piece of equipment. Validation means cleaning the equipment by the method, then testing for the allergen with swab tests and first-product tests, and repeating the test until the method gives a clean result every time. A method that works for milk may not work for peanut, because peanut protein sticks differently and hides in different places, so each allergen needs its own validation. A method that has not been validated is a guess, and a factory that uses a guess is gambling with its customers.
Routine checking is different from validation. Validation proves the method can work. Routine checking proves it did work, on that day, on that line. Routine checks are the visual look, the swab test after cleaning, and the first-product test. The results are recorded, and a failed result stops the line: the equipment is cleaned again, the method is looked at, and the product made since the last good check is held. The hold is not a punishment. It is the system working as it should, catching a problem before the product leaves the factory.
The diagram shows the factory system in order. The steps point to the diagram: the record at the end is what lets a manager prove the system worked, and the review is what keeps it working when people, products, and suppliers change.
People, training, and records
A system is only as good as the people who run it, and allergen training is not a single talk on the first day. It covers what an allergen is, which allergens the factory handles, where they can travel, what the controls are, and what to do when something goes wrong. It is given to every worker, including temporary and part-time workers, before they start work, and it is repeated when the plan changes. Training is checked, not assumed: a worker is watched doing the job, and asked to explain the controls, before being left to work alone. A signature on a training record means the worker was trained and understood, and the check behind the signature is what gives it meaning.
Records are the memory of the system. Cleaning logs, production orders, swab results, supplier statements, training records, and incident reports together show what happened, when, and who did it. Records are kept where they can be found, in a form that can be read, for as long as the factory's rules require. A record that is filled in at the end of the week from memory is not a record. It is a story. Records are filled in at the time, by the person who did the work, and a manager reviews them every week, looking for gaps, for failed checks, and for patterns that point to a control that is slipping.
Review is the step that keeps the system alive. Every week, the manager looks at the records and asks: did any check fail, did any product have to be held, did any supplier change anything, did any worker report a near miss? Every month, the plan itself is looked at: has any product changed, has any new allergen arrived, has any line changed? Once a year, or after any incident, the whole plan is reviewed from the start. A plan that is never reviewed becomes out of date, and an out-of-date plan is worse than no plan, because it gives a false sense of safety.
Training and food safety culture: the system behind the controls
Training is often treated as a single event: a new worker watches a video, signs a sheet, and starts work. That is not training. It is a record of attendance, and it does not change what the worker does at midnight on a busy shift. Real training has four parts. The first is knowledge: what allergens are, where they hide, and why small amounts matter, taught in plain words, in the worker's own language, with examples from the foods they actually make. The second is skill: how to clean a line, how to check a label, how to answer a customer, practised by doing, not by watching, with a trained worker beside the new worker until the new worker can do it alone. The third is checking: a supervisor watches the work, asks questions, and corrects mistakes at once, not at the next audit. The fourth is refreshment: training repeated when a recipe changes, when a new allergen arrives, when a new worker joins, and at least once a year, because knowledge fades, and a worker who was trained two years ago and never refreshed is a worker who has forgotten half of what they learned.
Food safety culture is what happens when the training is over and no one is watching. It is the shared belief, in a team, that allergen safety matters, that reporting a mistake is thanked, and that stopping a line because something looks wrong is praised, not punished. A culture is built by what managers do, not by what they say. A manager who checks the matrix in front of a customer teaches the team that checking is normal. A manager who thanks a worker for reporting a wrong scoop teaches the team that reporting is safe. A manager who lets a product go before the label check is done, to meet an order, teaches the team that production matters more than safety, and the team will learn that lesson faster than any training video. Culture is also built by what is measured: a team that counts near misses, that reads them together once a month, and that fixes the pattern it sees most often, is a team that learns. A team that counts only output, and never counts near misses, is a team that will learn about its mistakes from a customer reaction.
Temporary workers and agency staff need the same training as permanent workers, before they start, not after they have made a mistake. A temporary worker who is put on a line with no allergen training, and who uses the wrong scoop because no one told them, is not a careless worker. They are an untrained worker, and the fault sits with the business that put them there. The training record for every worker, permanent and temporary, names what was taught, when, by whom, and how it was checked, and the record is kept where a supervisor can find it. A training record that says only "trained" with no detail is not a record. It is a word, and a word does not prove that a worker can clean a line or answer a customer.
Practical note: Pick one line in your factory or kitchen and write its cleaning method on one page: what to take apart, what detergent to use, how to scrub, how to rinse, and how to check. Then clean the line by that method, swab it, and record the result. If the swab fails, change the method and try again. That one page, tested and proven, is the start of a validated cleaning system.
Quick self-check
Question: What is the difference between validation and routine checking of cleaning?
Validation proves the cleaning method can work, by testing it when it is first written and whenever anything changes. Routine checking proves it did work on that day, by a visual look, a swab test, or a first-product test after each cleaning. Both are needed: a validated method that is not checked can still fail on a bad day.
Question: Why must a new ingredient be signed off by more than one team before it is used?
Because one person may not see all the risks: buying sees the price, production sees the handling, and the technical team sees the allergens and the label. A joint sign-off means the allergens are known, the label is checked, and the claim on the product still holds before the ingredient enters the factory.
Try it yourself
Choose a food you make at home that contains an allergen, such as a cake with egg and milk. Write a one-page allergen plan for it: list the allergens, list every surface and tool they touch, write the order you will work in, write the cleaning steps between the allergen food and the next food you make, and write how you will check the cleaning. Then follow your own plan the next time you bake, and note anything you missed. That note is your first plan review.
Key ideas to carry forward
- Allergen control in a factory is a written plan, not a set of habits, naming every allergen, every route, every control, and every check.
- Buying is the first control point: buy against a specification, check every delivery, and know every supplier's allergens.
- Segregation in storage means marked areas, sealed labelled containers, allergens below other foods, and one scoop per container.
- Sequencing plans production from fewest allergens to most, with cleaning between runs, and dedicated equipment is used where the risk is highest.
- A cleaning method is a written set of steps for one piece of equipment, and validation proves it works for each allergen, by swab and first-product testing.
- Routine checking proves the cleaning worked on that day, and a failed check stops the line and holds the product.
- Training, records, and regular review keep the system alive, and a plan that is never reviewed becomes out of date.
Glossary
Allergen management plan
A written plan naming every allergen handled, every place it could move, every control that stops it, and every check that proves the control worked. Food tech example: the plan for a biscuit factory names peanut, milk, and egg, and the controls for each line.
Validation
Proof that a method, such as a cleaning method, works, gained by testing it when it is first written and whenever anything changes. Food tech example: a cleaning method is validated for peanut by swab tests that come back clean every time.
Segregation
Keeping allergens apart from other foods, in storage, in weighing, and in production, so they cannot move by accident. Food tech example: peanut flour is segregated in a marked area away from plain flour.
Specification
A written description of what an ingredient or product must be, including its allergens, used when buying and checking deliveries. Food tech example: the specification for a spice mix lists its ingredients and its allergens.
Shadow board
A board with the outline of each tool drawn on it, so a missing or misplaced tool is seen at once. Food tech example: scoops hang on a shadow board in the weighing area, one outline per scoop.
Changeover
The change from making one product to making another on the same line, including cleaning and checking between the two. Food tech example: the changeover from a plain biscuit run to a peanut biscuit run includes cleaning and a swab test.
First-product test
Testing the first product made after cleaning, to check that no allergen carried over from the previous run. Food tech example: the first biscuits after a nut run are tested for peanut protein before the batch is released.
Swab test
A test in which a swab is wiped over a surface after cleaning and tested for protein, to check that cleaning removed the allergen. Food tech example: a swab of a mixer bowl after cleaning shows whether peanut protein is still present.
Near miss
An event that could have caused harm but did not, such as using the wrong scoop and catching it before the food was served. Food tech example: a worker reports a near miss when a nut scoop is found in the plain flour bin.
Traceability
The ability to follow a product back to its ingredients, suppliers, and production records. Food tech example: a lot number lets a factory trace a biscuit back to the flour delivery it was made from.
Dedicated equipment
Equipment used only for one product or one set of allergens, so cross-contact cannot happen on it. Food tech example: a dedicated mixer is used only for nut-free products.
Weighing area
The place where ingredients are weighed out, where spills and shared scoops can spread allergens if it is not controlled. Food tech example: allergen ingredients are weighed in a separate area from plain ingredients.
Production order
The planned order in which products are made on a line, from fewest allergens to most, with cleaning between runs. Food tech example: the production order for the day lists plain biscuits first and peanut biscuits last.
Cleaning log
A record of each cleaning, naming the equipment, the method, the person, the time, and the check result. Food tech example: the cleaning log shows the mixer was cleaned and swabbed clean before the plain run.
Hold
Keeping a product from sale until a check result is known, such as after a failed swab test. Food tech example: biscuits made after a failed cleaning check are put on hold until they are tested.
Food safety culture
The shared belief in a team that safety matters, that reporting a mistake is thanked, and that stopping a line is praised. Food tech example: a team with a strong food safety culture reports a wrong scoop at once, instead of hiding it.
References
- Mortimore, S. and Wallace, C., HACCP: A Practical Approach, 3rd edition, 2013.
- Taylor, S. L. and Hefle, S. L., Food Allergies and Intolerances, 2005.
- Food and Drink Federation, Guidance on Allergen Management, 2019.
- Jackson, L. S., Food Allergen Management, 2013.
- Food and Agriculture Organization, Food Allergies, 2021.
Unit 6: Allergen Incidents and Recalls: Learning from Them
Note
Unit 6: Allergen Incidents and Recalls: Learning from Them
A question to start with
A supermarket puts a notice on its door: "Do not eat this biscuit. It contains peanut, which is not on the label. Return it for a refund." The biscuits were made correctly, the recipe was correct, and the factory is a good one. What went wrong was a label: a new supplier changed a spice mix, the mix now contained peanut flour, and nobody updated the label. One change, missed by one check, and thousands of packs had to come back. This unit is about moments like that: how allergen incidents happen, how recalls work, and how a business learns from them so the same mistake does not happen twice.
An incident is any event in which an allergic person eats a food they should not have eaten, or a food is found to carry an allergen it should not carry. A recall is the action that follows when a food that is already on sale is found to be unsafe: it is withdrawn from shops and customers are warned. Recalls are not a sign that a food system is broken. They are a sign that the system found a problem and acted on it. The businesses that suffer most from recalls are not the ones that have them, but the ones that hide them, delay them, or learn nothing from them.
Questions to think about
- A label error is found in a product that is already in shops. Who needs to know, and in what order?
- Why do labelling errors cause more allergen recalls than dirty factories do?
- A customer has a mild reaction and does not go to hospital. Should the business still record it? Why?
Think about the mild reaction before you read on
Yes, it must be recorded. A mild reaction is a signal that a control failed, and the same failure can cause a severe reaction in the next person. A record of mild reactions shows a pattern before a severe one happens, and it gives the business the facts it needs to fix the cause: the food, the batch, the label, and the supplier behind it.
How incidents happen: the common patterns
Allergen incidents follow a small number of patterns, and knowing them is the best defence against them. The most common pattern is the label that did not keep up with the recipe. A recipe changes, a supplier changes, a new ingredient is used, and the label stays as it was. The food is made correctly and labelled wrongly, and the allergic buyer trusts the label. The second pattern is the wrong pack: the right food goes into the wrong pack, or the right label goes onto the wrong food, often at a changeover when the line is switching from one product to another. The third pattern is cross-contact that was not controlled: a shared line, a shared tool, or a shared store that moved an allergen into a food that should not contain it, and the precautionary warning either was missing or was not believed.
A fourth pattern is the spoken answer that was wrong. A server says a dish is nut-free because the recipe has no nuts, not knowing that the sauce contains peanut, or that the fryer oil was used for a nut-coated food. A fifth pattern is the supplier who changes something without telling the buyer: a new factory, a new recipe, a new line, and the allergen statement arrives late or not at all. A sixth pattern is the new product that was never properly checked: a product is launched in a hurry, the allergen assessment is skipped, and the first sign of the problem is a customer reaction. Each pattern has a different fix, and the fix is always cheaper before the incident than after it.
Incidents also happen because of human factors that no machine can fix on its own. A worker is tired at the end of a long shift and skips a cleaning step. A new worker is not trained and uses the wrong scoop. A manager is under pressure to meet an order and lets a product go before the label check is done. A team is afraid to report a mistake and hides it. These are not excuses. They are facts about how people work, and a good allergen system is built to survive them: checks by a second person, holds that cannot be skipped, and a culture in which reporting a mistake is thanked, not punished. A system that only works when everyone is fresh, trained, and calm is not a system. It is a hope.
What to do when an incident happens
The first minutes after an incident matter most, and they must be practiced before they are needed. If a customer is reacting, the first duty is to the person: call for emergency help, follow the customer's own plan, help them use their auto-injector if they ask, and stay with them until help arrives. Do not offer food, water, or medicine of your own. Do not wait to see if it gets better. Do not move the person unless they are in danger where they are. The emergency plan for the business should be written, posted where workers can see it, and practiced, so that no one has to think it through for the first time during a real reaction.
Once the person is cared for, the business must find out what happened, and it must do so quickly. The food that was eaten is kept, not thrown away, together with its pack, its label, and its lot number. The recipe for that batch is pulled, with the supplier records for its ingredients. The production records for that day are pulled: who made it, on which line, in what order, what cleaning was done, and what checks were passed. The people who made and served the food are asked what happened, while their memory is fresh. All of this is written down, with times, because memory fades and a record written a week later is worth much less than a record written on the day.
The business must also decide who else needs to know. The customer needs to know what was in the food and what the business is doing about it. The supplier needs to know if an ingredient was involved. The food safety authority in the country needs to know if a product on sale is unsafe, and the rules for telling the authority differ by place, so the business must know its own country's rules before an incident happens. Other customers need to know if a product must be returned. Telling people early is hard, and it is also the right thing to do: a business that tells the truth quickly keeps more trust than one that waits and is found out later.
How a recall works
A recall starts with a decision: the product is unsafe, or may be unsafe, and it must not be eaten. The decision is made by the business, often with the food safety authority, and it is made on the facts, not on hope. If there is doubt about whether a product is safe, the product is held and the doubt is resolved before it is sold, not after. Once the decision is made, the product is identified precisely: which product, which pack size, which lot numbers, which dates, and which shops received it. A recall that names the wrong lot, or that names every lot when only one is affected, either leaves unsafe food on sale or wastes safe food, and both errors damage trust.
The recall then moves in two directions at once. In one direction, the product is withdrawn from shops, warehouses, and distribution, and the stock is counted, held, and then destroyed or relabelled as the authority directs. In the other direction, customers are warned: notices in shops, notices on the business website, messages through the media, and, where the business knows who bought the product, direct contact. The warning must say what the product is, what the allergen is, what the risk is, and what the customer should do: do not eat it, return it, and ask for a refund. The warning must be in words a customer can understand, and it must be placed where customers will see it, not buried where only an inspector will find it.
After the recall, the business must show that the recall worked. Stock is counted and reconciled: how much was made, how much was sold, how much came back, and how much is still missing. The gap between what was made and what came back is the food that may still be in homes, and the business must keep the warning up until that gap is as small as it can be made. The records of the recall are kept, because the authority will ask for them, and because they are the evidence that the business acted properly. A recall that is not recorded is a recall that cannot be proved.
Learning from an incident: the review
A recall ends, and the learning begins. The business asks what failed, and it asks it in a way that looks for causes, not for someone to blame. The review follows the chain: what was the food, what was the allergen, where did it come from, which control failed, and why did the check not catch it? The answers are often uncomfortable. A control may have existed on paper but never been done. A check may have been done but never recorded. A supplier may have changed something and nobody asked. A worker may have known the risk and been afraid to speak. Each answer points to a fix, and the fix is written down, given a person and a date, and checked until it is done.
The fixes fall into the same groups as the controls. A label fix may mean a new check where the recipe and the label meet, with a second person checking every change. A supplier fix may mean new statements, new checks on delivery, or a change of supplier. A cleaning fix may mean a new method, a new validation, or dedicated equipment. A training fix may mean new training for every worker, including temporary workers, before they start. A culture fix may mean a new rule that reporting a mistake is thanked, and that a worker who stops a line because something looks wrong is praised, not punished for slowing production. The fix that is not checked is not a fix. It is a promise, and promises do not stop the next incident.
Learning must also travel beyond the one business. Food safety authorities publish recall notices, and other businesses read them to check whether the same mistake could happen to them. A factory that reads a recall notice about a spice mix and checks its own spice mixes has learned from someone else's incident without paying the price of its own. Industry groups share lessons, and a business that shares what it learned, honestly and without hiding its own error, helps the whole sector. The alternative is a sector in which every business makes the same mistake in turn, and allergic customers pay for each one.
The diagram shows the recall chain. The steps point to the diagram: the care for the person comes first, the learning comes last, and the review is the step that stops the same incident happening again.
Near misses: the free lessons
A near miss is an event that could have caused harm but did not: the wrong scoop found in the plain flour bin before it was used, the wrong label found on the roll before it was printed, the nut product found on the plain line before the run started. Near misses are free lessons, and a business that collects them is lucky, because it learns without a customer being harmed. A business that ignores them, or punishes the worker who reports them, throws the free lessons away and waits for a real incident to teach the same lesson at a much higher price.
Collecting near misses needs a simple system: a short form, a box or a page where any worker can write what happened, and a weekly look at the forms by a manager who thanks the reporter and acts on the pattern. If three near misses in a month all involve the same scoop, the scoop system is fixed, not the workers. If three near misses all involve a label at changeover, the changeover check is fixed. The pattern is the lesson, and the pattern only appears when the reports are collected and read together. A single near miss is a story. Three near misses with the same cause are a warning.
A worked example: finding the root cause with five whys
When an incident happens, the first cause named is rarely the real cause. A biscuit is labelled with no milk warning, but it contains milk, and the first answer is "the label was wrong". That answer is true, and it is also useless, because it does not say why the label was wrong, or what to change so it does not happen again. The method called five whys asks "why" five times, each time answering from the last answer, until the cause that can be fixed is found. It is a simple method, and it works because it stops the team from fixing the symptom and leaving the cause in place.
Here is a worked example, built from the patterns in this unit. A customer with milk allergy reacts to a biscuit labelled with no milk warning. Why did the biscuit contain milk? Because the recipe used whey powder, which carries milk protein. Why did the recipe use whey powder without the label being updated? Because the buyer changed the supplier, and the new supplier's whey powder had a different name on the delivery note, and the recipe file was not updated. Why was the recipe file not updated? Because the change was agreed by phone, and there is no written rule that a supplier change must be recorded and checked before the first batch. Why is there no written rule? Because the business has no change control procedure for suppliers, and no one person owns supplier changes. Why is there no procedure? Because the business grew quickly, and the buying, the recipe, and the labelling were never joined into one system, with one person responsible for the whole chain.
The root cause, at the fifth why, is not the label, and not the whey powder. It is the missing change control procedure, and the missing owner for supplier changes. The fix that follows is therefore not "check the label more carefully", though the label must be checked. The fix is to write a change control procedure, to name one person who owns supplier changes, and to make a rule that no new supplier material is used until its allergen statement has been checked against the recipe and the label, and the check has been signed. The fix is then tested: the next supplier change is run through the new procedure, and the team checks whether the recipe and the label were updated before the first batch. If they were, the fix worked. If they were not, the procedure needs to be changed, not the worker blamed. That is the difference between a fix and a promise: a fix is a change in the system, with a check that proves it worked.
Practical note: Keep a near miss book in your kitchen or on your line, a plain notebook with four columns: date, what happened, what could have gone wrong, and what was done. Write in it every time something almost goes wrong, however small. Read it once a month with your team, and fix the pattern you see most often first. That book is the cheapest food safety tool you will ever own.
Quick self-check
Question: Why is a label that did not keep up with a recipe the most common cause of allergen recalls?
Because recipes and suppliers change often, and the label is written once and then reprinted many times. If the check that ties the label to the recipe is missed once, every pack printed after that carries the wrong information, and the food itself is made correctly, so nothing in the factory looks wrong until a customer reacts.
Question: A recall notice says a product "may contain peanut". What should a customer who bought it do?
Do not eat it, return it to the shop for a refund, and follow the instructions in the notice. The customer should also tell the shop or the maker if they already ate it and felt unwell, so the incident can be recorded and the cause can be found.
Try it yourself
Find a real recall notice online from a food safety authority in your country, about an allergen. Read it and write down five facts: the product, the allergen, the lot numbers, what went wrong, and what customers were told to do. Then write one line saying what control, from the units in this subject, would have stopped it: a label check, a supplier check, a cleaning check, or a changeover check. Keep the notice with your notes, and add a new one each month. Over a year, you will have a picture of the mistakes that happen most often, and that picture is worth more than any textbook list.
Key ideas to carry forward
- Allergen incidents follow a small number of patterns, and the most common is a label that did not keep up with a recipe or supplier change.
- When a customer reacts, care for the person first, call for emergency help, and keep the food, pack, label, and records.
- A recall identifies the exact lots affected, withdraws stock, warns customers clearly, and counts what came back against what was made.
- After a recall, the business reviews the cause, fixes it, gives the fix a person and a date, and checks that the fix is done.
- Near misses are free lessons: collect them, read them together, and fix the pattern, not the person.
- A culture in which reporting a mistake is thanked is safer than one in which mistakes are hidden, because hidden mistakes become incidents.
- Reading recall notices from other businesses is a cheap way to learn without paying the price of your own incident.
Glossary
Incident
Any event in which an allergic person eats a food they should not have eaten, or a food is found to carry an allergen it should not carry. Food tech example: a customer reacts to a biscuit whose label missed peanut.
Recall
The withdrawal of a food that is already on sale because it is unsafe, with a warning to customers. Food tech example: biscuits with the wrong label are recalled from shops and customers are told to return them.
Withdrawal
Removing a food from shops, warehouses, and distribution before it reaches customers, often as part of a recall. Food tech example: the factory withdraws all packs of one lot from distribution.
Lot
A set of food made under the same conditions, such as one production run, identified by a lot number. Food tech example: all biscuits made on one day carry the same lot number, so they can be recalled together.
Near miss
An event that could have caused harm but did not, such as the wrong scoop found before it was used. Food tech example: a worker reports a near miss when a nut scoop is found in the plain flour bin.
Root cause
The underlying reason a problem happened, rather than the surface event, found by asking why the control failed. Food tech example: the root cause of a wrong label was a supplier change that nobody checked, not the worker who printed the label.
Corrective action
A step taken to fix the cause of a problem so it does not happen again, with a named person and a date. Food tech example: the corrective action after a label error is a second-person check on every label change.
Traceability
The ability to follow a product back to its ingredients, suppliers, and production records, and forward to the shops that received it. Food tech example: a lot number lets a factory trace a biscuit back to its flour delivery and forward to every shop that sold it.
Recall notice
A public warning about a recalled food, saying what the product is, what the risk is, and what customers should do. Food tech example: a recall notice in a supermarket tells customers not to eat a biscuit and to return it for a refund.
Food safety authority
A government body that sets food safety rules, checks businesses, and issues recall notices. Food tech example: the food safety authority in a country publishes recall notices and can order a product off sale.
Changeover
The change from making one product to making another on the same line, including cleaning and checking between the two. Food tech example: the wrong label was put on at a changeover from a plain to a nut product.
Hold
Keeping a product from sale until a check result is known, such as after a failed swab test or a label doubt. Food tech example: biscuits are put on hold while the label is checked against the new recipe.
Auto-injector
A device that gives a measured dose of adrenaline through the skin, carried by people at risk of anaphylaxis. Food tech example: a customer with peanut allergy carries an auto-injector and uses it when a reaction starts.
Adrenaline
A hormone and medicine that reverses the effects of anaphylaxis, by narrowing blood vessels and opening airways. Food tech example: adrenaline from an auto-injector helps restore breathing during anaphylaxis.
Reconciliation
Counting what was made, sold, returned, and is still missing during a recall, to show how much unsafe food may still be in homes. Food tech example: reconciliation shows 8,000 packs were made, 6,000 returned, and 2,000 still unaccounted for.
Five whys
A method that asks "why" five times, each time from the last answer, to find the root cause of an incident. Food tech example: five whys on a wrong label finds that the root cause is a missing change control procedure for suppliers.
Root cause
The underlying cause of an incident, found by asking why until a fix in the system is reached. Food tech example: the root cause of a biscuit containing milk is a supplier change that was never recorded, not the label alone.
Change control
A written procedure that says how a change, such as a new supplier, is recorded, checked, and approved before it is used. Food tech example: change control stops a new flour from being used until its allergen statement has been checked against the recipe and the label.
References
- Mortimore, S. and Wallace, C., HACCP: A Practical Approach, 3rd edition, 2013.
- Taylor, S. L. and Hefle, S. L., Food Allergies and Intolerances, 2005.
- Food and Agriculture Organization, Food Allergies, 2021.
- Jackson, L. S., Food Allergen Management, 2013.
- Food and Drink Federation, Guidance on Allergen Management, 2019.
Unit 7: Serving Allergic Customers: Food Service
Note
Unit 7: Serving Allergic Customers: Food Service
A question to start with
A family walks into a restaurant. One child has a peanut allergy, and the parent asks the server, "Which dishes are safe for her?" The server smiles and says, "Everything is fine, we are very careful." The parent orders a chicken dish, the child eats it, and reacts. Later, the kitchen explains that the chicken was marinated in a sauce containing peanut, and the server had never read the recipe file. The server meant well. The parent trusted the smile. The system failed both of them. This unit is about food service, where the label is a spoken word, the kitchen is a few steps away, and the care given in the first minute of a conversation decides whether a meal is safe.
Food service covers restaurants, cafes, school canteens, hospital kitchens, care homes, takeaway shops, market stalls, and any place where food is made and served to a person who is present. In all of them, the allergic customer cannot read a pack, because there is no pack. The information must travel from the recipe file to the server to the customer, and then from the customer back to the kitchen, in a conversation that lasts a minute or two. That conversation is the most important allergen control in food service, and it is also the most fragile, because it depends on people, on memory, and on honesty.
Questions to think about
- A server says "everything is fine" without checking. Why is that answer dangerous, even if it turns out to be true?
- A customer says "no nuts" but does not say whether it is an allergy. What should the server ask next?
- A kitchen is busy on a Friday night. How can it still serve an allergic customer safely?
Think about the "everything is fine" answer before you read on
Because it closes the conversation and stops the customer from asking more, while giving no information at all. A safe answer names the dish, names its allergens, and says how it was prepared, or it says "I do not know, let me check with the kitchen." The first answer informs, the second is honest, and "everything is fine" does neither.
The conversation: asking, listening, answering
The conversation starts when the customer mentions an allergy, and it can also start when the server asks. In many good restaurants, the server asks every table, "Does anyone have an allergy or a food they cannot eat?" That one question, asked routinely, catches the allergies that a customer might not mention, because they are shy, because they are tired of asking, or because they assume the restaurant already knows. Asking routinely also protects the business: a customer who is asked and answers honestly gives the kitchen the information it needs, and a customer who is never asked has no chance to give it.
Listening matters as much as asking. The server must listen to which food is involved, how serious the reaction is, and what the customer needs: a dish without that food, a dish made separately, or a dish from a menu that is already free of it. The server must not guess, must not fill in gaps from memory, and must not assume that "no milk" means the same thing for every customer. One extra question, "Is it an allergy, and what happens if you eat it?" takes ten seconds and can change the care completely. The answer is written down, on the order, in words the kitchen can read, with the table number and the dish, so that the information travels with the order and cannot be lost between the table and the kitchen.
Answering must be honest. A server who knows the answer gives it, naming the dish and its allergens. A server who does not know says so, and checks with the kitchen or with the allergen matrix, and then comes back with the answer. A server who cannot get a clear answer says that too, and offers a dish that is known to be safe, or offers to make a dish specially. The worst answer is a guess dressed as knowledge. Allergic customers can tell the difference between a server who checked and a server who guessed, and they will trust the first and leave the second.
The kitchen: making the dish safely
Once the order reaches the kitchen, the work is the same as in a factory, on a smaller scale: clean hands, clean tools, clean surfaces, fresh ingredients, and no shortcuts. The allergic dish is made with clean hands, washed with soap and water, and with clean gloves if gloves are used. It is made with clean tools: a fresh knife, a fresh board, a fresh pan, and fresh tongs, taken from a clean store, not from the pile of tools used for the last order. It is made on a clean surface, wiped and washed, not on the board that just held the allergen food. It is made with ingredients taken from fresh containers, not from open containers that may have been used for other dishes.
The order of work matters in a busy kitchen. Where possible, the allergic dish is made first, before the allergen foods for that service, or in a separate area. Where that is not possible, the cook cleans the area and the tools before starting, and works without interruption until the dish is finished, so that no one else uses the same tools halfway through. The dish is kept apart once it is made: it is plated on a clean plate, covered if it must wait, and handed to a server who knows it is the allergic dish, with the table number and the allergy written on the ticket. The handover is the last place where a mix-up can happen, and it is where a tired team most often makes one, so the ticket and the spoken handover both name the allergy.
Fryers, grills, and ovens need special care. A fryer that fried a nut-coated food carries nut protein in its oil to the next food fried in it, so an allergic dish is never fried in shared oil unless the oil is known to be free of that allergen. A grill that cooked fish carries fish protein on its bars, so the bars are cleaned or a clean tray is used. An oven that baked a nut dish carries crumbs on its shelves, so the shelves are cleaned or the dish is covered. A cook who says "the oven is hot, it will kill it" is making the most common error in food service allergy work: heat does not reliably destroy allergen protein, and the dish is not safe because it was cooked.
Menus, matrices, and records in food service
The allergen matrix, introduced in Unit 4, is the base for food service. It lists every dish and every allergen in it, and it is kept where servers can see it and where the kitchen can update it. The matrix is updated the day a recipe changes, and the old version is removed, so that no one answers from an out-of-date copy. A matrix that is kept in a drawer, or that no one has updated for a year, is worse than no matrix, because it gives a false sense of safety. The manager checks the matrix every week against the recipe files, and signs the check.
Menus carry the same information in a form the customer can see. A menu may mark dishes with symbols for allergens, or carry a note saying "please tell us about allergies, and ask for the allergen folder". A menu that says nothing leaves the customer to guess, and a customer who guesses wrong is a customer who reacts. Special menus, such as a menu free of nuts, or a menu for a school with a nut-free policy, must be kept true: every dish on that menu must be checked against the matrix, and the kitchen must know that the menu is a promise, not a suggestion.
Records in food service are short and simple, and that is why they are often skipped. The order ticket with the allergy written on it is a record. The note in the kitchen log that an allergic dish was made, with the time and the cook, is a record. The incident report written after a reaction is a record. Each one takes seconds to write, and each one is the evidence that the business did its job, or the evidence that it did not. A business that keeps no records has no defence when a customer reacts, and no way to learn from what happened.
Special settings: schools, hospitals, care homes, and takeaways
Schools carry a special duty, because children cannot always speak for themselves, and because a reaction in a child can grow fast. A school kitchen needs a list of every child with an allergy, with the food, the symptoms, and the emergency plan, kept where the cooks can see it and updated whenever a parent reports a change. The kitchen needs a plan for packed lunches, for food brought in for birthdays, and for cooking lessons, because each of those is a route by which an allergen can reach a child. The school needs a nut-free or allergen-aware policy that is written, shared with parents, and followed, not a policy that exists on paper and is ignored in practice. And the school needs staff who know what anaphylaxis looks like and what to do, because the first minutes belong to the staff on the spot, not to a doctor who is minutes away.
Hospitals and care homes carry a similar duty, with an added difficulty: the people being served may not be able to speak, may not remember their allergy, or may be too ill to ask. The care plan for each person must carry the allergy, the kitchen must work from that plan, and the tray that reaches the bed must be checked against the plan by the person who serves it. A tray delivered to the wrong bed, or a meal made for the wrong allergy, is an error that the system must catch before the food is eaten, by checking the name, the bed, and the allergy together.
Takeaway and delivery add distance between the kitchen and the customer. The customer orders by phone or online, the food is made, packed, and carried, and the customer eats it at home, where no server can help. The allergen information must therefore be given at the point of ordering, on the menu, on the website, and on the pack, and the kitchen must treat a delivery order with an allergy note exactly as it would treat a table order: clean tools, fresh preparation, and a label on the bag naming the allergy. Delivery drivers must know that a bag marked with an allergy must not be opened, swapped, or mixed with another order. A takeaway that takes an allergy order and then packs it with the other orders, without a mark, has lost the information on the way to the customer.
Training the whole team
Training in food service is not a talk for the manager alone. It is for every person who touches food or talks to customers: the cook, the server, the person who takes phone orders, the person who packs takeaways, and the person who washes up. Each one needs to know what an allergen is, which allergens the business handles, what the controls are, and what to do when a customer reacts. Training is given before a new worker starts, and it is repeated when the menu changes or when an incident shows a gap. A new worker is watched and checked before being left alone with customers, and a worker who has not been trained does not serve allergic customers on their own.
The hardest part of training is not the knowledge. It is the habit of saying "I do not know, let me check". New workers want to be helpful, and helpful can look like giving an answer at once, even when they are not sure. Training must make it clear that the helpful answer is the honest one, and that a worker who checks is praised, while a worker who guesses is corrected. Managers show this by example: a manager who checks the matrix in front of a customer, rather than answering from memory, teaches the whole team that checking is the normal way to work.
The diagram shows the service chain. The steps point to the diagram: the chain is only as strong as its weakest step, and the weakest step is usually the spoken answer or the handover, so those two deserve the most practice.
When something goes wrong in service
If a customer reacts in a restaurant, the response is the same as anywhere else: care for the person first, call for emergency help, follow the customer's plan, and stay with them. Once the person is cared for, the business must find out what happened, and it must do so honestly. The order ticket, the recipe file, the matrix, and the people who cooked and served the dish are all looked at, and the record is written on the day. The customer is told what was found, and what will change. An apology that is honest, and a change that is real, keep more trust than a denial that is later proved false.
The most common service errors are also the most preventable: a server who answered from memory, a ticket that did not carry the allergy, a cook who used a shared fryer, a dish that was handed to the wrong table, a menu that had not been updated. Each one has a fix that is cheap and simple: a matrix that is checked weekly, a ticket that must carry the allergy, a rule that allergic dishes are never fried in shared oil, a handover that names the allergy, a menu that is updated the day a recipe changes. The business that fixes the system, rather than blaming the person, will not see the same error again. The business that blames the person and changes nothing will see it again, with a different person, on a different night.
A worked example: building one row of the allergen matrix
An allergen matrix is a table, and a table is only as good as its rows. Building one row, for one dish, shows how the whole matrix is made, and where it goes wrong. Take a dish a restaurant serves every day: a chicken sandwich, with bread, grilled chicken, mayonnaise, lettuce, and tomato. The row is built by listing every ingredient, and then, for each ingredient, asking what it is made from, what it was made with, and what it touched. The bread is made from wheat flour, water, yeast, and salt, and it contains wheat, and it was made in a bakery that also makes sesame bread, so sesame must be checked. The chicken is plain, but it was marinated in a sauce that contains soy, so soy must be marked. The mayonnaise is made from egg and oil, so egg must be marked. The lettuce and tomato carry no allergen on their own, but they were washed in a sink that was also used to wash a peanut sauce bowl, so the washing step must be checked, and if the sink is shared, the risk must be recorded.
The row, when it is finished, marks wheat, egg, and soy, and it notes the sesame check and the sink check, with the date and the person who checked. The row is then read by a server, who can answer a customer who asks "does this sandwich contain egg?" with a clear yes, and can answer a customer who asks "does it contain sesame?" with a clear answer too, because the sesame check is written down, not guessed. The row is updated the day any ingredient changes: a new bread supplier, a new marinade, a new mayonnaise, or a new sink routine, and the old row is removed, so no one answers from it. A matrix built row by row, with each row checked in this way, is a matrix that can be trusted. A matrix copied from another restaurant, or built from memory, is a matrix that will be wrong in the rows no one checked, and the row no one checked is the one that will cause the reaction.
Practical note: Before your next service, run a five-minute drill: one person plays a customer with a peanut allergy, one plays the server, and one plays the cook. Walk the whole chain, from the question to the handover, and time it. Then ask the team what was hard, what was missed, and what would happen on a busy night. That drill, repeated once a month, is worth more than a poster on the wall.
Quick self-check
Question: Why should a server ask every table about allergies, not only wait for customers to mention them?
Because many customers do not mention an allergy unless asked: they may be shy, tired of asking, or may assume the restaurant already knows. Asking routinely catches those allergies, gives the kitchen the information it needs, and shows the customer that the business takes allergy seriously.
Question: Why must an allergic dish never be fried in shared fryer oil?
Because the oil carries allergen protein from the last food fried in it to the next food. A nut-coated food leaves nut protein in the oil, and the next food fried in that oil picks it up. Cooking does not destroy the protein, so the dish is unsafe even though it was cooked.
Try it yourself
Visit a restaurant, cafe, or takeaway as a customer and notice how allergy is handled: is there a note on the menu, does the server ask about allergies, is there an allergen folder you can ask for, and how does the server answer when you ask about one dish? Write down what you saw, what was good, and what was missing. Then write one line saying what you would change if you ran that business. That line is the start of a service plan.
Key ideas to carry forward
- In food service the label is a spoken word, so the conversation between server and customer is the most important allergen control.
- Ask every table about allergies, listen carefully, and write the allergy on the order ticket with the table and the dish.
- Answer honestly: name the dish and its allergens from the matrix or recipe file, or say "I do not know, let me check".
- Cook the allergic dish with clean hands, clean tools, a clean surface, and fresh ingredients, and never fry it in shared oil.
- Keep the dish apart once it is made, and hand it over by name and allergy, so it cannot be swapped with another dish.
- Schools, hospitals, care homes, and takeaways each add their own risks, and each needs its own plan and records.
- Train every worker, including new and part-time workers, before they start, and praise the worker who checks rather than guesses.
Glossary
Allergen matrix
A table listing every dish or product and every allergen in it, used to answer customer questions accurately. Food tech example: a restaurant allergen matrix shows which dishes contain egg, milk, or peanut.
Order ticket
The written or printed order that travels from the server to the kitchen, carrying the dish, the table, and any allergy note. Food tech example: the order ticket for table 4 says "chicken curry, no peanut, peanut allergy".
Handover
The moment a finished dish is passed from the kitchen to the server, or from the server to the customer, when a mix-up can happen. Food tech example: the cook hands over the allergic dish by naming the table and the allergy.
Shared oil
Fryer oil used for more than one food, which can carry allergen protein from one food to the next. Food tech example: oil that fried nut-coated chicken carries nut protein to chips fried in the same oil.
Allergen folder
A folder kept in a restaurant with the allergen information for every dish, which a customer can ask to see. Food tech example: the allergen folder at the counter lists every dish and its allergens.
Care plan
A written plan for one person in a school, hospital, or care home, naming their allergy, symptoms, and emergency care. Food tech example: a child's care plan says she has a peanut allergy and where her auto-injector is kept.
Auto-injector
A device that gives a measured dose of adrenaline through the skin, carried by people at risk of anaphylaxis. Food tech example: a customer with peanut allergy carries an auto-injector and uses it when a reaction starts.
Anaphylaxis
A severe allergic reaction affecting more than one body system at once, with breathing difficulty or a drop in blood pressure. Food tech example: a person who eats shellfish and then cannot breathe needs urgent emergency care for anaphylaxis.
Takeaway
Food made to be taken away and eaten elsewhere, where the customer cannot ask the cook in person. Food tech example: a takeaway order with an allergy note must be labelled on the bag.
Menu note
A note on a menu telling customers to ask about allergies and where the allergen information can be found. Food tech example: the menu says "please tell us about allergies, and ask for the allergen folder".
Recipe file
The current written record of a recipe, listing every ingredient and its amount, used as the source for labels and spoken answers. Food tech example: the recipe file for a soup lists every ingredient, so the server can answer allergy questions from it.
Cross-contact
The transfer of an allergen from one food or surface to another food that should not contain it. Food tech example: peanut butter left on a knife spreads peanut protein to the next sandwich.
Emergency plan
A written plan saying what to do when a customer has an allergic reaction, including who calls for help and where the auto-injector is. Food tech example: the emergency plan in a school kitchen is posted on the wall where every cook can see it.
Special menu
A menu made for a particular need, such as a nut-free menu, which must be kept true by checking every dish against the allergen matrix. Food tech example: the nut-free menu in a school lists only dishes checked against the matrix.
Server
A person who takes orders and serves food to customers, and who carries the allergen conversation between the customer and the kitchen. Food tech example: the server asks every table about allergies before taking the order.
References
- Taylor, S. L. and Hefle, S. L., Food Allergies and Intolerances, 2005.
- Food and Agriculture Organization, Food Allergies, 2021.
- Food and Drink Federation, Guidance on Allergen Management, 2019.
- Jackson, L. S., Food Allergen Management, 2013.
- Mortimore, S. and Wallace, C., HACCP: A Practical Approach, 3rd edition, 2013.
Unit 8: Allergen Risk Assessment and Threshold Doses
Note
Unit 8: Allergen Risk Assessment and Threshold Doses
A question to start with
A factory makes two biscuits on one line. The first contains peanut, the second does not, and the line is cleaned between them. The cleaning is checked, the swabs come back clean, and the second biscuit is labelled with no peanut warning. Then a laboratory test finds a tiny trace of peanut protein in the second biscuit. The maker asks the question every allergen manager must answer: is this trace enough to matter, and if so, what should change? The answer is not a feeling. It comes from risk assessment, a step-by-step way of asking how much allergen could be present, how much of the food a person might eat, and how little of the allergen can cause a reaction. This unit is about that method, and about threshold doses, the idea that a reaction needs a certain amount of allergen, and that the amount differs from person to person.
Risk assessment sounds like a task for specialists, and the maths in it is specialist work. But the logic belongs to every food worker. It is the same logic a cook uses when deciding whether a shared spoon is a real risk or a small one, and the same logic a buyer uses when asking a supplier how a raw material is made. The unit explains the logic in plain words, shows the steps in order, and works through examples with round teaching numbers, so the reader can follow the arithmetic and see where each number comes from. Real reference doses and real test results must always come from published scientific work and from the testing laboratory, never from this unit, and never from a guess.
Questions to think about
- If a cleaning swab finds no peanut, does that prove the next food is free of peanut?
- Two people eat the same biscuit with the same trace of peanut. One reacts, one does not. How can both results be true?
- A factory can clean better, run allergen foods last, or label the food "may contain". Which choice protects the allergic buyer best, and which one only protects the maker?
Think about the two people question before you read on
Both results can be true because people differ in sensitivity. A dose that causes a reaction in one allergic person may cause nothing in another allergic person, and the same person may react differently on different days. Risk assessment works with that spread of sensitivity, not with one single number for everyone, and that is why it talks about the share of allergic people who would react at a given dose, rather than a single safe amount.
What risk assessment is, and what it is not
Risk assessment asks four questions in order. First, what is the hazard? In allergen work the hazard is the allergen protein itself, such as peanut protein or milk protein, and the harm is an allergic reaction. Second, how much of the hazard could be present? This is the exposure question, and it covers the amount of allergen in the food and the amount of the food a person eats. Third, how much does it take to cause harm? This is the dose response question, and it is answered by studies of allergic people, which show the doses at which reactions start. Fourth, what is the risk, and what should be done about it? This is the risk characterisation step, where the answers to the first three questions are put together and a decision is made: change the process, change the cleaning, change the label, or change the recipe.
Risk assessment is not a promise of zero risk. No food system can promise that, because allergens travel in dust, on hands, in shared air, and in raw materials that change from batch to batch. What risk assessment gives is a reasoned judgement about whether the risk is low enough to accept, and what must change if it is not. A maker who skips it is left with two bad choices: label everything "may contain", which tells the buyer nothing, or label nothing, which tells the buyer nothing either, and puts allergic people at risk. A maker who does it can say, in plain words, what was checked, what was found, and why the label says what it says.
The work is done by a small team, not by one person alone. The quality manager brings the test results and the cleaning records. The production manager brings the knowledge of how the line really runs, including the shortcuts people take when they are in a hurry. The buyer brings the supplier information. The technical manager brings the recipe and the process. The team writes the assessment down, with its numbers, its assumptions, and its gaps, so that a new manager, an auditor, or a customer can follow it a year later. An assessment that lives only in one person's head is not an assessment. It is a memory, and memories leave with people.
Hazard: the protein and the person
The hazard in allergen work is the protein, not the food as a whole. Peanut oil that has been highly refined may carry very little protein, while peanut flour carries a lot. Milk fat carries little protein, while skimmed milk powder carries a lot. This matters because two ingredients from the same food can carry very different amounts of hazard, and because a process that removes fat does not remove protein. The hazard question therefore asks, for each ingredient, how much allergen protein it carries, and in what form. A supplier statement that says only "contains peanut" does not answer it. A statement that says how the ingredient is made, what it is made from, and what else is made on the same line, comes much closer.
The person matters as much as the protein. Allergic people differ in sensitivity, and the same person's sensitivity can change with illness, with exercise, with alcohol, and with medicines. Children and adults differ, and a person who has had a severe reaction before may react again at a low dose, though not always. Risk assessment does not try to predict one person's reaction. It works with groups, using studies in which allergic volunteers ate measured doses under medical care, so that the doses that cause reactions in a small share of people can be mapped. Those studies are the scientific base of threshold work, and they are the reason the field can talk about doses at all, instead of only about presence and absence.
Two words are used constantly in this work, and they are often mixed up. Hazard is the thing that can cause harm, the allergen protein. Risk is the chance that harm will happen, which depends on how much protein is present, how much food is eaten, and how sensitive the eater is. A hazard can be present with almost no risk, if the amount is tiny and the food is eaten in small amounts, and a small hazard can carry real risk if the food is eaten in large amounts by a sensitive person. Keeping hazard and risk apart is the first step in thinking clearly about allergens.
Exposure: how much allergen, and how much food
Exposure is the amount of allergen protein a person actually takes in, and it has two parts. The first part is the concentration of allergen protein in the food, usually talked about in milligrams of protein per kilogram of food, written as mg/kg. The second part is the amount of food eaten at one sitting, in grams or kilograms. Multiply the two, with the units matched, and the result is the dose of allergen protein in milligrams. That multiplication is the core arithmetic of allergen risk assessment, and it is worth seeing worked through once, slowly, because every later step depends on it.
A worked example, with round teaching numbers only, makes the arithmetic visible. Suppose a biscuit contains peanut protein at a concentration of 10 mg/kg, and a person eats 50 g of biscuits at one sitting. First, turn the serving into kilograms: 50 g is 0.05 kg. Then multiply concentration by serving size: 10 mg/kg times 0.05 kg gives 0.5 mg of peanut protein. The kilograms cancel, leaving milligrams, which is the dose. If the same person ate 200 g, the dose would be 10 times 0.2, which is 2 mg. The same food, the same concentration, and a different dose, because the serving is different. That is why exposure assessment asks about serving size, not only about concentration, and why a food eaten in large amounts, such as a main meal, needs more care than a food eaten in a spoonful.
Where does the concentration number come from? From testing, from cleaning validation, and from knowledge of the process. A factory that runs peanut biscuits before plain biscuits, and cleans between them, tests the first plain biscuits for peanut protein, and the test result is the concentration. A factory that buys a spice mix tests the mix, or asks the supplier for the test result. A factory that reworks off-spec product into a new batch must count the allergen in the rework as part of the concentration. Each of these is a source of allergen, and the assessment lists every source, because a source that is left out is a risk that is left out. The list includes the obvious sources, such as recipe ingredients, and the quiet ones, such as rework, dust from a silo, oil shared between fryers, and a cleaning cloth used on two lines.
Serving size is not the pack size, and the two are often different. A pack may hold 200 g, while a serving is 30 g, or a pack may hold one serving of 400 g that is eaten whole. The assessment uses the serving a real eater would take, and for foods eaten by children, the serving a child would take. It also asks about the eater who eats more than the serving, because some people do, and about the food that is eaten every day, because a small daily dose adds up across a week in a way that a single dose does not, in the sense that the chance of meeting a reactive dose grows with each eating occasion.
Threshold doses: how little can cause a reaction
A threshold dose is the smallest dose of an allergen protein that causes a reaction in a person. Because people differ, the field does not use one threshold for everyone. It uses the idea of an eliciting dose, written ED, with a number that says what share of allergic people would react at that dose. ED01 is the dose predicted to cause a reaction in 1 in 100 allergic people. ED05 is the dose predicted to cause a reaction in 5 in 100. ED10 is the dose for 10 in 100. The lower the number after ED, the smaller the share of people who react, and the lower the dose. These values come from pooling the results of many clinical studies, in which allergic volunteers ate measured doses under medical care, and from statistical models fitted to those results.
The ED idea changes how a maker thinks. Instead of asking "is any peanut present?", the maker asks "how much peanut protein is present, how much food will be eaten, and what share of allergic people would react at that dose?" If the dose in a serving is below the ED01, then fewer than 1 in 100 allergic people would be expected to react, which is a low risk, though not zero. If the dose is above the ED05, then more than 5 in 100 would be expected to react, which is a risk most makers would not accept, and the process or the label must change. The choice of which ED to use as the line is a judgement for the maker, the regulator in their country, and the scientific advice they follow, and it must be written down with its reason, so it can be defended and revisited when new studies appear.
Thresholds differ between allergens. Some allergens cause reactions at lower doses than others, and the ED values for peanut, milk, egg, and other allergens are different from each other. That is why a single limit for all allergens, such as "10 mg/kg for everything", does not match the science: it is too strict for one allergen and too loose for another. A risk assessment uses the ED for the allergen in question, not a general number borrowed from another food. It also remembers that ED values are predictions from models, not measurements of one person, and that they carry uncertainty, especially at the low end, where few study volunteers reacted and the model is stretching beyond the data.
Thresholds also have limits that must be stated plainly. They are built from studies of people who agreed to take part, and those people may not include the most sensitive allergic people, because the most sensitive people are often not put through dose studies for safety reasons. The studies use one form of the allergen, such as peanut flour, while a factory may have roasted peanut, peanut butter, or peanut oil, and the form can change how much protein is available. The studies give doses on one day, while a real eater may be ill, may have exercised, or may have taken a medicine that lowers their threshold that day. For all these reasons, an ED is a guide for decisions, not a guarantee for one person, and the label and the controls must still be honest about that.
The diagram shows the risk assessment steps in order. The step most often skipped is the last one, the review, and it is the step that catches the supplier change or the new rework stream that quietly adds allergen to a food that was safe before.
From assessment to action: reference doses and labelling
A reference dose is an amount of allergen protein, in milligrams per serving, that a maker or a regulatory system uses as the line for a decision. It is usually set from an ED value, such as ED01 or ED05, for that allergen. If the dose in a serving is below the reference dose, the risk is judged low, and a precautionary warning may not be needed. If the dose is above it, the risk is judged high enough that action is needed, and the action may be a change in process or a precautionary warning on the label. Different systems use different reference doses, and the maker must follow the system that applies in the country where the food is sold, and must check the current rule there, because reference doses are updated as new studies appear.
This is where a voluntary reference-dose system fits. Such a system is a voluntary, science-based method used by some food makers to decide when a precautionary statement such as "may contain" is needed. It takes the reference dose for the allergen, the serving size, and the measured or estimated concentration, and gives a clear yes or no answer. Its value is that it replaces a guess with a reasoned decision, and that the same method is used across foods, so a buyer can trust that "may contain" means the same thing from one product to the next. Its limit is that it is voluntary, and not every maker uses it, so two similar foods on one shelf may carry different warnings for the same risk. The reader should check which system, if any, applies in their own country, and should not treat one country's approach as the rule everywhere.
The decision the assessment supports is often about cleaning and sequencing rather than about the label. If the dose is too high, the maker can run allergen foods after non-allergen foods, so the allergen food is last and the line is cleaned before the next day's non-allergen run. The maker can use dedicated equipment, or dedicated lines, for the allergen food. The maker can change the order of products on a shared line, so the food with the lowest risk runs first. The maker can improve cleaning, and validate the new cleaning with tests, so the concentration falls. The maker can change the recipe, removing the allergen ingredient or replacing it. The label is the last control, not the first, and a maker who reaches for the label before trying the process changes has the order backwards.
A worked example ties the steps together, again with round teaching numbers only. Suppose a factory makes a plain biscuit after a peanut biscuit on the same line. Tests on the first plain biscuits find peanut protein at 20 mg/kg. A serving is 30 g, which is 0.03 kg, so the dose is 20 times 0.03, which is 0.6 mg of peanut protein. Suppose the reference dose the maker uses for peanut is 0.2 mg per serving, taken from published ED work. The dose of 0.6 mg is three times the reference dose, so the risk is judged too high. The maker improves cleaning, retests, and finds 5 mg/kg. The new dose is 5 times 0.03, which is 0.15 mg, below the reference dose of 0.2 mg. The risk is now judged low, the label decision is recorded with its numbers, and the cleaning is written into the procedure so it happens every time, not only on the day of the test. That is risk assessment doing its job: a number, a decision, and a control that can be repeated.
What a good assessment looks like on paper
A good assessment is short, specific, and checkable. It names the food, the allergen, and the line. It lists every source of the allergen, including rework, dust, shared oil, and supplier materials. It gives the concentration, with the test method and the date of the test, and the serving size used. It names the ED or reference dose used, and where it came from. It states the decision, with its reason, and the controls that follow from it. It names the person who will review it, and the date of the next review, and the events that will trigger an early review: a new supplier, a new recipe, a new line, a failed test, or a complaint. It is signed and dated, and it is kept with the other food safety records, where an auditor can find it.
A weak assessment is easy to recognise. It says "risk is low" with no numbers. It lists only recipe ingredients and forgets rework and dust. It uses a serving size that no one eats, such as 10 g for a food sold in a 200 g pack. It borrows a reference dose from another allergen, or from a website with no source. It has no review date, and no name against it. It was written once, years ago, and never looked at again, even though the supplier changed twice since then. The cure for each of these is the same: write the number, name the source, and set the review date.
Practical note: Pick one food you know well, such as a biscuit or a sauce, and sketch its assessment on one page. List the allergens in its recipe, then list three sources of cross-contact that are not in the recipe, then write the serving size a real eater would take, and then write what test you would run to find the concentration. You will find that the hard part is not the arithmetic. It is listing the sources, because the sources are where the surprises live.
Quick self-check
Question: A biscuit contains peanut protein at 10 mg/kg and a serving is 50 g. What is the dose of peanut protein in one serving?
50 g is 0.05 kg. 10 mg/kg times 0.05 kg gives 0.5 mg of peanut protein. The kilograms cancel, leaving milligrams, which is the dose in one serving.
Question: Why is ED01 a lower dose than ED05 for the same allergen?
Because ED01 is the dose predicted to cause a reaction in 1 in 100 allergic people, while ED05 is the dose for 5 in 100. Fewer people react at the lower dose, so ED01 sits below ED05 on the dose scale.
Try it yourself
Take the worked example in this unit and change one number at a time. First, keep the concentration at 20 mg/kg and change the serving from 30 g to 100 g: what is the new dose? Then keep the serving at 30 g and change the concentration to 2 mg/kg: what is the dose now? Then ask which change, a smaller serving or a lower concentration, a maker can actually control, and which one the maker cannot control at all. Write your three answers down, with the arithmetic shown, and then write one line saying what you would change first in the factory: the cleaning, the sequencing, or the label. Compare your line with a friend's line, and ask each other what number would change your mind.
Key ideas to carry forward
- Risk assessment asks four questions in order: what is the hazard, how much could be present, how much does it take to cause harm, and what should be done about it.
- Hazard is the allergen protein, and risk is the chance of harm, which depends on concentration, serving size, and the sensitivity of the eater.
- Exposure is concentration times serving size, with the units matched, and the result is the dose in milligrams of allergen protein.
- Threshold doses are described with eliciting doses: ED01 for 1 in 100 allergic people, ED05 for 5 in 100, and ED01 is the lower dose.
- Thresholds differ between allergens, carry uncertainty, and are guides for decisions, not guarantees for one person.
- A reference dose is the line used for a decision, and a voluntary reference-dose system gives a reasoned yes or no for a precautionary warning.
- The label is the last control, not the first: cleaning, sequencing, dedicated equipment, and recipe change come before it.
- A good assessment is written down, with numbers, sources, a decision, a review date, and a named reviewer.
Glossary
Risk assessment
A step-by-step method that asks what the hazard is, how much could be present, how much causes harm, and what should be done. Food tech example: a risk assessment for a biscuit line lists peanut sources, measures the concentration, and decides whether the label needs a warning.
Hazard
A thing that can cause harm, such as an allergen protein in food. Food tech example: peanut protein in a biscuit is the hazard for a peanut-allergic eater.
Risk
The chance that harm will happen, which depends on the hazard, the amount present, and the eater. Food tech example: a trace of peanut in a biscuit eaten in a small serving carries a lower risk than the same trace in a food eaten in a large serving.
Exposure
The amount of a substance a person actually takes in, here the allergen protein in a serving. Food tech example: exposure to peanut protein is the concentration in the biscuit times the serving eaten.
Concentration
The amount of a substance in a given amount of food, often in milligrams per kilogram. Food tech example: peanut protein at 10 mg/kg in a biscuit is the concentration used in the dose calculation.
Serving size
The amount of a food that a person eats at one sitting. Food tech example: a serving of biscuits of 30 g is used to work out the dose of peanut protein in one eating occasion.
Dose
The amount of a substance taken in at one time, here in milligrams of allergen protein. Food tech example: a dose of 0.5 mg of peanut protein is the result of multiplying concentration by serving size.
Threshold dose
The smallest dose of an allergen that causes a reaction in a person. Food tech example: the threshold dose for peanut differs from person to person, so the field works with the share of people who react at a given dose.
Eliciting dose (ED)
A dose predicted to cause a reaction in a stated share of allergic people, such as ED01 for 1 in 100. Food tech example: ED05 for peanut is the dose at which 5 in 100 peanut-allergic people would be expected to react.
ED01
The dose predicted to cause a reaction in 1 in 100 allergic people. Food tech example: a maker who wants a low risk compares the dose in a serving with the ED01 for that allergen.
ED05
The dose predicted to cause a reaction in 5 in 100 allergic people. Food tech example: a dose above the ED05 for milk is judged a risk that most makers would not accept.
Reference dose
An amount of allergen protein per serving, set from ED values, used as the line for a labelling or process decision. Food tech example: a reference dose for peanut of 0.2 mg per serving is the line a maker compares each serving dose against.
Voluntary reference-dose system
A voluntary, science-based method that uses reference doses to decide when a precautionary allergen statement is needed. Food tech example: a maker uses a voluntary reference-dose system to decide whether a biscuit needs a "may contain peanut" statement.
Precautionary statement
A warning on a pack, such as "may contain", that an allergen may be present through cross-contact. Food tech example: a "may contain milk" statement warns a milk-allergic buyer that milk protein may be present even though milk is not in the recipe.
Rework
Food from a production run that is put back into a later batch, carrying its allergens with it. Food tech example: biscuit trimmings containing egg that are reworked into a plain batch add egg protein to that batch.
Risk characterisation
The step where hazard, exposure, and dose response are put together to judge the risk and decide what to do. Food tech example: risk characterisation turns a test result and a serving size into a decision to change the cleaning.
References
- Taylor, S. L. and Hefle, S. L., Food Allergies and Intolerances, 2005.
- Sicherer, S. H. and Sampson, H. A., Food allergy, 2nd edition, 2014.
- Jackson, L. S., Food Allergen Management, 2013.
- Food and Agriculture Organization, Food Allergies, 2021.
- Crevel, R. W. R., Risk assessment for food allergy, 2015.
Unit 9: Allergen Testing and Detection: ELISA, PCR and LC-MS
Note
Unit 9: Allergen Testing and Detection: ELISA, PCR and LC-MS
A question to start with
A factory has cleaned a line, run a plain biscuit after a peanut biscuit, and sent a sample to the laboratory. The laboratory report comes back with a number: peanut protein, 4 mg/kg. The quality manager looks at the number and asks three questions. Is the number right? What did the test actually measure? And would a different test have given a different number? Those three questions are the heart of allergen testing. A test result is only as good as the test behind it, and different tests measure different things: one measures protein, one measures DNA, and one measures the pieces of a protein after it has been broken apart. This unit explains the three main methods, what each one can and cannot do, and how to read a laboratory report without being misled by it.
Testing is where allergen management meets the laboratory, and the meeting is not always comfortable. The factory wants a simple answer, yes or no, present or absent. The laboratory gives a number with a limit, a range, and a note about what the test could not see. Learning to live with that number, and to use it well, is a skill. A manager who treats a "not detected" result as proof of absence will be caught out. A manager who understands detection limits, cross-reactivity, and sampling will use the same result to make a sound decision. This unit builds that understanding, with worked examples that use round teaching numbers, clearly marked as examples, so the arithmetic can be followed without mistaking the numbers for real limits.
Questions to think about
- A test finds no peanut in a biscuit. Does that prove the biscuit contains no peanut?
- A test that looks for peanut DNA finds peanut DNA, but the food was made with highly refined peanut oil. Has the test found a real risk?
- Two laboratories test the same biscuit and give different numbers. How can both be right?
Think about the two laboratories question before you read on
Both can be right because they used different tests, or the same test in a different way. One may measure total peanut protein and the other may measure one peanut protein only. One may extract the protein with one liquid and the other with a different liquid. One may test a sample from the start of the run and the other from the end. The number belongs to the method and the sample, not only to the food, and that is why a report must name the method.
Why testing matters, and what it cannot do
Testing has four jobs in allergen management. The first is checking raw materials: does this spice mix, this flour, or this chocolate contain the allergen the supplier says it does not? The second is validating cleaning: after cleaning, is the allergen gone from the surface, and is it gone from the first food made after cleaning? The third is checking finished foods: does this batch contain the allergen it should not contain, and at what level? The fourth is investigating a problem: after a complaint or an incident, where did the allergen come from, and how much was there? Each job needs a different sample, a different test, and a different reading of the result, and a test chosen for one job may be wrong for another.
Testing also has limits that must be stated plainly. A test measures the sample that was sent, not the whole batch, and a biscuit from the start of a run may differ from a biscuit from the end. A test has a limit below which it cannot see, so "not detected" means "below the limit of this test", never "zero". A test can be fooled by the food itself: chocolate, spices, and foods rich in fat or polyphenols can hide protein from a test, or can make a test read high. A test measures what it was built to measure, and a protein test cannot tell you about DNA, while a DNA test cannot tell you how much protein is present. A manager who knows these limits will ask for the right test, take the right sample, and read the report with care. A manager who does not will be surprised, and the surprise will come at the worst time.
Sampling is half the testing, and it is the half most often done badly. A sample must represent the food it stands for. For a surface, that means swabbing the places where allergen hides: corners, joints, dead legs in pipes, the underside of a mixer blade, and the first product through the line. For a batch of biscuits, that means taking biscuits from the start, the middle, and the end of the run, and from more than one tray, because allergen is rarely spread evenly. For a delivery of flour, that means taking scoops from more than one sack. The laboratory can only test what it is given, and a neat sample taken from the cleanest place gives a neat result that says nothing about the rest of the batch. The sampling plan is written down before the sample is taken, with where, when, how much, and by whom, and the plan is kept with the result.
ELISA: the workhorse that measures protein
ELISA is the most widely used allergen test in food factories, and its full name, enzyme-linked immunosorbent assay, describes what it does. An antibody, a protein made by the immune system that binds to one target, is fixed to a surface. The food sample is prepared, usually by mixing it with a liquid that pulls the allergen protein out of the food, and the liquid is added to the surface. If the allergen protein is present, it binds to the antibody. A second antibody, linked to an enzyme, is added, and it binds too, forming a sandwich with the allergen protein in the middle. A chemical is added that the enzyme turns into a coloured product, and the depth of colour is measured with an instrument. The deeper the colour, the more allergen protein was present. That is the whole method in one paragraph, and every ELISA kit on the market is a version of it.
ELISA is popular because it is fast, it can be run in a factory laboratory or sent to an outside laboratory, it measures protein, which is the hazard, and it can measure low levels, often down to a few milligrams of protein per kilogram of food. It is also popular because it is specific: an antibody made for peanut protein should bind to peanut protein and not to other proteins. That specificity is also its weakness. If the food has been heated, roasted, or fermented, the protein may have changed shape, and the antibody may bind less well, or not at all, so the test reads low even though the protein is still there. If the food contains a protein that looks like the target, such as a legume protein that looks like peanut protein to the antibody, the test can read high. This is called cross-reactivity, and the kit maker should state which foods cross-react and how much.
Reading an ELISA result means reading the calibration with it. The laboratory runs a set of standards, samples with known amounts of allergen protein, and measures the colour for each one. The results form a standard curve, a line or curve that links colour to amount. The colour of the unknown sample is read off that curve to give its amount. Two numbers on the report matter most. The limit of detection, LOD, is the lowest amount the test can reliably tell apart from zero. The limit of quantification, LOQ, is the lowest amount the test can measure with acceptable accuracy, and it sits above the LOD. A result below the LOD is reported as "not detected". A result between the LOD and the LOQ is reported as detected but not reliably measured. A result above the LOQ is given as a number. A manager who asks only "was it detected?" misses the difference between these three, and the difference matters for the decision that follows.
A worked example shows the arithmetic, with round teaching numbers only. Suppose a laboratory runs peanut standards at 0, 1, 2, 5, and 10 mg/kg, and the colour readings rise in step with the standards. A sample gives a colour that falls between the 2 and 5 mg/kg standards, and the curve reads it as 3 mg/kg. Suppose the kit states an LOD of 0.5 mg/kg and an LOQ of 1 mg/kg. The result of 3 mg/kg is above the LOQ, so it is reported as a number, 3 mg/kg. If the same sample had read 0.7 mg/kg, it would be above the LOD but below the LOQ, so it would be reported as detected but not quantified. If it had read 0.3 mg/kg, it would be below the LOD, and reported as not detected. The same sample, the same kit, and three different ways of reporting, depending on where the number falls. That is why the report must be read whole, not as a single word.
ELISA also comes in two forms that are easy to mix up. A quantitative ELISA gives a number, as above, and needs a standard curve, a calibrated reader, and a trained operator. A qualitative lateral flow test, the strip test that looks like a pregnancy test, gives a yes or no answer in minutes, and is used on the factory floor to check a surface or a rinse water. The strip is fast and simple, and it is also less sensitive and less exact than a laboratory ELISA, and it must never be used as a substitute for a laboratory result when a number is needed for a risk assessment. The strip answers "is there enough to see?" and the laboratory answers "how much is there?" Those are different questions, and the factory needs both, in their proper places.
PCR: finding DNA when protein is hard to see
PCR, the polymerase chain reaction, does not measure protein at all. It measures DNA. It copies a short piece of DNA that is characteristic of the allergen source, such as peanut DNA or soy DNA, doubling it again and again until there is enough to see. If the DNA is present, it is copied, and the test is positive. If it is absent, nothing is copied, and the test is negative. Because PCR copies DNA, it can detect very small amounts, and it works even when the protein has been changed by heat or processing, as long as the DNA is still there to copy. That makes it useful for foods where ELISA struggles, such as foods that have been heavily heated, fermented, or refined.
The strength of PCR is also its limit. DNA is not the hazard: protein is. Finding peanut DNA in a food shows that peanut was there, or that something from a peanut plant was there, but it does not say how much peanut protein is present, and it does not say whether that protein can cause a reaction. Highly refined peanut oil may carry peanut DNA in trace amounts while carrying almost no protein, so a PCR positive and an ELISA negative can both be true at once, and the risk assessment must decide which one matters. In that case the protein result, the ELISA, is the one that speaks to the hazard, and the DNA result speaks to the history of the food, to where its ingredients came from. A manager who treats a PCR positive as proof of a dangerous food will throw away safe food. A manager who ignores a PCR positive will miss the clue that a supplier's material has changed.
PCR also needs care in the laboratory, because the very thing that makes it powerful, its ability to copy tiny amounts of DNA, makes it easy to contaminate. A speck of dust carrying peanut DNA, a pipette used twice, or a sample handled after a peanut sample, can give a false positive. Good laboratories run blank samples, samples with no food in them, alongside the real samples, to catch contamination, and they run positive and negative controls with every batch. The report should state the controls and the result for each one. A report with no controls is a report that cannot be trusted, however neat its numbers look.
LC-MS: the confirmatory method that reads protein pieces
LC-MS, liquid chromatography coupled to mass spectrometry, is the most exact of the three methods, and the one most often used to confirm a result that matters. Its logic is different from ELISA and PCR. First, the proteins in the food are broken into short pieces, called peptides, with an enzyme that cuts protein at known places. Then the peptides are separated by liquid chromatography, which sorts them by their chemistry, so they come out one after another. Then the mass spectrometer weighs each peptide, with great exactness, and reads its pattern, which is like a fingerprint for the protein it came from. If the fingerprint matches a known peanut peptide, the test says peanut protein is present, and the size of the signal says how much.
LC-MS has three strengths that make it the confirmatory method. It is specific: it reads the fingerprint of the peptide, not a colour that any protein could produce, so cross-reactivity is rare. It can measure more than one allergen at a time: a single run can look for peanut, milk, egg, soy, and wheat peptides together. And it works on processed foods where ELISA struggles, because it looks for short peptides that survive heating and processing better than whole proteins do. Its weaknesses are cost, time, and skill. The instrument is expensive, the run takes longer than an ELISA, the sample preparation is more involved, and the result needs a trained analyst to read it. For that reason LC-MS is used to confirm, to settle a dispute, or to measure a low level with confidence, rather than for routine daily checks.
The three methods are often used together, and the combination is stronger than any one alone. A factory might use a strip test on the floor to check cleaning, a laboratory ELISA to measure the level in the first product, a PCR test to check whether a raw material carries the allergen source at all, and an LC-MS run to confirm a result that would change a label or trigger a recall. Each method answers a different question, and the manager who knows which question each one answers will not ask ELISA to do PCR's job, or PCR to do ELISA's job. The testing plan, written down with the method for each job, the sampling plan, and the laboratory, is part of the allergen management plan, and it is reviewed when a new food, a new supplier, or a new process arrives.
The diagram shows how to choose a test by the question being asked. The most common error is choosing the test first and the question second, which gives an answer to a question nobody asked.
Reading a laboratory report without being misled
A laboratory report has five parts that must all be read. The first is the sample: what was sent, when it was taken, from where, and how much. If the sample is not described, the result cannot be tied to a batch. The second is the method: which test, which kit, and which version, because an ELISA kit for peanut from one maker is not the same as one from another. The third is the result, with its unit, such as mg/kg, and its basis, such as milligrams of protein per kilogram of food, or milligrams of peanut per kilogram, which are not the same thing, because peanut is not all protein. The fourth is the LOD and LOQ, which say what the test could and could not see. The fifth is the controls and the notes: whether the blanks were clean, whether the standards behaved, and whether the food interfered with the test.
Two traps catch even careful readers. The first is the unit trap. One laboratory may report milligrams of peanut per kilogram, while another reports milligrams of peanut protein per kilogram. Peanut is roughly one quarter protein, so 4 mg/kg of peanut protein is not the same as 4 mg/kg of peanut. The report must state which one it is, and the risk assessment must use the protein number, because protein is the hazard. The second is the "not detected" trap. "Not detected" means below the LOD of that test, on that sample, on that day. It does not mean zero, and it does not mean the next sample will also be below the LOD. A manager who writes "peanut free" on the basis of one "not detected" result has written a promise the test never made.
Results also vary between laboratories, and the variation has reasons. Different kits use different antibodies, which bind to different proteins. Different extraction liquids pull different amounts of protein out of the food. Different analysts prepare the sample in different ways. The same sample tested in two laboratories can give results that differ by a factor of two or more, and both can be right within their own method. The cure is to use one laboratory and one method for trend work, so that changes over time mean something, and to send the same sample to a second laboratory, with LC-MS, only when a result must be confirmed. The report is kept, with the sampling plan, so that a later reader can see what was done and why.
Practical note: The next time you see a laboratory report, read it in this order: sample, method, unit, LOD and LOQ, then the number. Then ask one question: does the number answer the question I asked when I sent the sample? If it does not, the next step is not to argue with the number. It is to send a new sample, with a clear question, to the right test.
Quick self-check
Question: A laboratory reports peanut protein as "not detected". What does that mean?
It means the amount was below the limit of detection of that test, on that sample, on that day. It does not mean zero, and it does not prove the whole batch contains no peanut protein.
Question: A food made with highly refined peanut oil gives a PCR positive for peanut DNA but an ELISA negative for peanut protein. Which result speaks to the hazard, and why?
The ELISA result speaks to the hazard, because the hazard is the protein, and ELISA measures protein. The PCR result shows that peanut DNA was present, which speaks to the history of the ingredient, but DNA on its own is not the hazard.
Try it yourself
Find a laboratory report, a worked example in a textbook, or a kit instruction sheet, and read it with the five-part check from this unit: sample, method, unit, LOD and LOQ, then the number. Write down each part in your own words, and then write one line saying what decision the number supports, and one line saying what decision it does not support. If you cannot find a real report, take the worked example in this unit, the sample that read 3 mg/kg, and write the same five parts for it, with the LOD of 0.5 mg/kg and the LOQ of 1 mg/kg. That exercise, done once with care, is the habit that stops a "not detected" result from becoming a false promise.
Key ideas to carry forward
- Testing has four jobs: checking raw materials, validating cleaning, checking finished foods, and investigating a problem, and each job needs its own sample and test.
- Sampling is half the testing: a sample must represent the batch, the surface, or the delivery it stands for, and the plan is written down before the sample is taken.
- ELISA measures protein with antibodies, a standard curve, a limit of detection, and a limit of quantification, and it can be fooled by heat-changed protein and by cross-reactivity.
- PCR measures DNA, not protein, and it can find an allergen source after heavy processing, but a DNA positive does not by itself prove a protein hazard.
- LC-MS reads the fingerprints of protein pieces, is specific and can measure several allergens at once, and is used to confirm a result that matters.
- A report must be read whole: sample, method, unit, LOD and LOQ, controls, and notes, and "not detected" means below the limit of this test, never zero.
- Results vary between laboratories and methods, so trend work uses one laboratory and one method, and a result that changes a label is confirmed.
Glossary
ELISA
A laboratory test that uses antibodies to measure the amount of a protein, such as an allergen protein, in a food. Food tech example: an ELISA on a biscuit measures peanut protein in milligrams per kilogram.
Antibody
A protein that binds to one target, used in tests to pick out one allergen protein from a food. Food tech example: an antibody made for milk protein binds to milk protein in a sauce and not to other proteins.
Standard curve
A set of samples with known amounts, used to link a test reading, such as colour, to an amount. Food tech example: the colour of a biscuit sample is read off the standard curve to give its peanut protein in mg/kg.
Limit of detection (LOD)
The lowest amount a test can reliably tell apart from zero. Food tech example: an ELISA with an LOD of 0.5 mg/kg reports a sample below that as not detected.
Limit of quantification (LOQ)
The lowest amount a test can measure with acceptable accuracy, sitting above the LOD. Food tech example: a sample that reads between the LOD and the LOQ is reported as detected but not reliably measured.
Cross-reactivity
A test reacting to a protein that looks like its target, giving a reading that is too high. Food tech example: an antibody for peanut may cross-react with another legume protein in a food.
Lateral flow test
A strip test that gives a yes or no answer in minutes, used on the factory floor to check a surface or a rinse. Food tech example: a lateral flow strip checks whether a cleaned mixer still carries milk protein.
PCR
A test that copies a short piece of DNA again and again until it can be seen, used to find the DNA of an allergen source. Food tech example: PCR finds soy DNA in a food even after the soy protein has been changed by heating.
DNA
The material in cells that carries the instructions for a living thing, and that PCR copies to find an allergen source. Food tech example: peanut DNA in a sample shows that material from a peanut plant was present.
LC-MS
A method that separates protein pieces and weighs them with great exactness, used to confirm allergen results. Food tech example: LC-MS confirms a peanut result by reading the fingerprint of a peanut peptide.
Peptide
A short piece of a protein, made when a protein is broken apart, and read by LC-MS. Food tech example: a peanut peptide with a known fingerprint tells the analyst that peanut protein was present.
Blank sample
A sample with no food in it, run alongside real samples to catch contamination in the laboratory. Food tech example: a blank that gives a positive PCR result warns the laboratory that contamination has occurred.
Control
A sample with a known result, run with a batch of tests to show the test worked as it should. Food tech example: a positive control in an ELISA run shows that the test can still find the allergen.
Sampling plan
A written plan that says where, when, how much, and by whom a sample is taken, so the sample represents the food. Food tech example: a sampling plan for biscuits takes biscuits from the start, middle, and end of a run.
Not detected
A test result meaning the amount was below the limit of detection of that test, on that sample. Food tech example: "not detected" for egg protein in a sauce means the level was below the LOD, not that the sauce contains no egg at all.
Matrix
The food itself, with its fat, sugar, and other parts, which can hide a protein from a test or make a test read high. Food tech example: the chocolate matrix can make an ELISA read low for milk protein.
References
- Nielsen, S. S., Introduction to the Chemical Analysis of Foods, 1997.
- Taylor, S. L. and Hefle, S. L., Food Allergies and Intolerances, 2005.
- Jackson, L. S., Food Allergen Management, 2013.
- Food and Agriculture Organization, Food Allergies, 2021.
- Poms, R. E. and Anklam, E., Food allergen detection methods, 2004.
Unit 10: Allergen Management in the Supply Chain and Allergen-Free Product Development
Note
Unit 10: Allergen Management in the Supply Chain and Allergen-Free Product Development
A question to start with
A bakery decides to make a biscuit that is free of all major allergens, a biscuit that allergic children can eat without fear. The recipe is simple: rice flour, sugar, oil, and water. The bakery buys rice flour from a new supplier because it is cheaper, makes the first batch, and sends it for testing. The test finds wheat protein. The supplier's flour was milled in a mill that also mills wheat, and the flour carried wheat dust with it. The bakery had checked its own kitchen, its own line, and its own recipe, and it had missed the one place where the allergen came in: the supply chain. This unit is about that chain, the long journey from farm to factory, and about how to build a food that is truly free of an allergen, from the supplier to the shelf.
An allergen-free food is not made by leaving an allergen out of the recipe. It is made by keeping the allergen out of every step that leads to the recipe: the farm, the mill, the transport, the warehouse, the factory, and the pack. Each step can add the allergen back, and each step needs a control. The same is true of any food, not only an allergen-free one: a maker who does not know what is in the raw materials cannot know what is in the finished food. The supply chain is therefore not a buying problem. It is a food safety problem, and this unit treats it as one.
Questions to think about
- A supplier says its flour is "allergen free". What would you ask before you believed it?
- A factory makes an allergen-free biscuit on a line that also makes peanut biscuits. What would have to change before the biscuit could honestly be called allergen free?
- A new allergen-free food costs more than the ordinary version. Who should pay the extra cost, and what would make a buyer willing to pay it?
Think about the supplier question before you read on
You would ask for the allergen statement in writing, for the test results behind it, for the name of the mill and the other foods milled there, for how the flour is transported and stored, and for what happens when the supplier changes a source. A spoken promise, or a line on an invoice, is not enough. The answer must be written, dated, and checkable, and it must be checked again when anything changes.
The supply chain: where allergens travel before the factory
A supply chain is the chain of people and places a raw material passes through before it reaches the factory: the farm, the collector, the mill or processor, the packer, the transporter, the warehouse, and the distributor. At each link, the material can pick up an allergen. Wheat can pick up soy in a shared silo. A spice can pick up peanut in a shared grinder. An oil can pick up fish protein in a shared tanker. A flour can pick up sesame in a shared warehouse. The allergen is rarely added on purpose. It travels in dust, in a reused sack, in a tanker that was not cleaned, or in a warehouse where sacks are stacked side by side and one leaks onto another.
The first control is knowing the chain. For each raw material, the maker lists the supplier, the place it is made, the other foods made in the same place, the transport used, and the storage used. That list is called a supply chain map, and it is drawn for every material that carries an allergen risk, not only for the allergens in the recipe. A maker who buys flour from a broker, who buys it from a mill, who buys wheat from many farms, must still know the mill, because the mill is where the flour meets other grains. A maker who does not know the mill does not know the flour, however good the broker's paperwork looks.
The second control is the supplier agreement. The maker asks the supplier, in writing, for an allergen statement for each material: which allergens are in it, which allergens are handled in the same place, which allergens travel in the same transport, and what cleaning and separation are used. The maker asks for test results, for the method used, and for the date of the test. The maker asks to be told, before the change happens, when a supplier changes a source, a mill, a process, or a transport route. That promise, called change notification, is the control that catches the quiet change: the mill that starts milling a new grain, the transporter who starts carrying a new cargo, the warehouse that starts storing a new product next door. Without it, the maker learns about the change from a test result, or from a complaint, which is too late.
The third control is checking. The maker does not trust a statement without checking it, and the checking is done in proportion to the risk. A low-risk material, such as salt from a dedicated plant, may need only a statement and an occasional test. A high-risk material, such as a spice mix, a flour, or a chocolate, may need a test on every delivery, or a visit to the supplier's site, to see the cleaning, the separation, and the records with the maker's own eyes. The visit is not a social call. It is a check of the same questions the maker asks in the factory: where does the allergen sit, where can it travel, what stops it, and what proves the control worked? The results of the check are written down, with the date, the person who checked, and the action that followed, and a supplier who fails the check is not used until the failure is fixed.
Buying, receiving, and storing: the factory gate
The supply chain ends at the factory gate, and the gate is a control point. When a delivery arrives, the receiver checks three things before the material is accepted: the paperwork, the pack, and the label. The paperwork must match the order: the right material, the right supplier, the right allergen statement, and the right batch number. The pack must be sound: no torn sacks, no leaking drums, no damp boxes, because a torn sack lets the material out and lets dust in. The label must name the material and its allergens, and the batch number must match the paperwork, so that a problem in one batch can be traced and the batch can be held if a test fails. A delivery that fails any of these checks is held, not used, and the hold is recorded, with the reason and the decision.
Storage is the next control, and it is where many factories lose the gains made at the gate. Allergens are stored apart: allergen materials on their own shelves, in sealed containers, labelled with the allergen name, and never above non-allergen materials, so that a leak falls onto the floor and not onto another food. Spillage is cleaned at once, with the cleaning method that removes protein, not only with a dry brush that moves dust into the air. Scoops, jugs, and weighing equipment are dedicated to one allergen, or are cleaned between uses, and the colour of the scoop, a simple and cheap control, tells the worker which allergen it belongs to. The store is checked, and the check is recorded, because a store that is tidy on the day of the visit and untidy every other day is not a controlled store.
Traceability ties the chain together. Every batch of finished food must be traceable back to the batches of raw materials that went into it, and forward to the customers who bought it. That is done with batch numbers, kept in records that link the delivery note, the store issue, the production run, and the dispatch note. When a supplier reports a problem in one batch of flour, the maker must be able to say, in hours, which finished foods used that batch, and where those foods went. A maker who cannot do that must recall everything, or must guess, and guessing is not a control. The traceability test, done once a year with a real batch, is the proof that the records work, and the test is timed, because a trace that takes a week is a trace that arrives after the food has been eaten.
The diagram shows the supply chain controls in order. The link most often missing is change notification, and it is the link that lets a new allergen into a food that was safe for years.
Allergen-free product development: designing safety in from the start
Allergen-free product development starts with a clear definition. "Free of" must mean something exact: free of which allergen, tested how, and to what level? A biscuit free of peanut is not free of milk, and a biscuit free of gluten is not free of wheat protein in the sense that matters for wheat allergy. The development team writes the definition down at the start, with the allergens it covers and the test that will prove it, and the definition is agreed with the quality team, the marketing team, and the buyer, so that the claim on the pack, the test in the laboratory, and the control in the factory all mean the same thing. A claim written by marketing alone, without the test and the control behind it, is a promise the factory cannot keep.
The recipe is designed with the allergen in mind from the first trial. The team chooses ingredients that do not carry the allergen, and that are not made where the allergen is handled. A rice flour from a dedicated mill is chosen over a cheaper flour from a shared mill. A chocolate made on a dedicated line is chosen over a chocolate made on a shared line. An emulsifier from soy is replaced with one from another source when the food must be soy free. Each ingredient is checked against the definition, and the check is recorded, with the supplier statement and the test result. An ingredient that cannot be checked is not used, however good it tastes, because an unchecked ingredient is an unknown, and an unknown cannot be called free.
The process is designed in the same way. The team asks, for each step, where the allergen could enter, and what stops it. The answer may be a dedicated line, used only for the allergen-free food. It may be a line that is cleaned and validated before the allergen-free run, with the first product tested and held until the result comes back. It may be a change in order, so the allergen-free food is made first, before any allergen food is made that day, when the line is at its cleanest. It may be a change in pack, so the allergen-free food is packed in a room of its own, or on a packer that is cleaned and checked before the run. The process that is designed for allergen-free from the start is cheaper and safer than a process that is changed later, after the food is already on sale, because the later change must work around equipment, people, and habits that were never built for it.
Testing in development is done in three stages. First, the ingredients are tested, to prove the recipe can be free. Second, the first trial batches are tested, to prove the process can be free. Third, the food is tested over time, in normal production, to prove the freedom lasts, because a process that is free on the first day can drift: a new supplier, a new worker, a busy day, or a shortcut can bring the allergen back. The testing plan names the method, the sampling points, and the frequency, and the results are trended, so that a slow rise in levels is seen before it becomes a failure. A single test, however good, proves only that one sample was free on one day. A trend of tests proves the system is free.
The cost, the claim, and the trust
Allergen-free foods cost more, and the reasons are honest ones. Dedicated ingredients cost more. Dedicated lines, or extra cleaning and testing, cost more. Smaller runs cost more per pack. The maker must count the cost, and must decide how it is paid: by the buyer, through a higher price, by the maker, through a lower margin, or by selling the food in a different way, such as a smaller pack, or a direct sale that cuts out a middleman. The price must be explained, in a word or two on the pack or in the shop, so the buyer can judge whether the extra cost is worth it. A maker who hides the cost by cutting the quality of the main ingredient will end up with a food that is free of allergens and free of buyers, because no one will buy it twice.
The claim on the pack must match the control behind it. "Free from peanut" must mean the food was made with peanut-free ingredients, on a line that was proved free, and tested to a stated level, with the test method available to anyone who asks. "Made in a factory that handles peanut" must be said where it is true, even on an allergen-free food, because the allergic buyer needs the whole picture to decide. A claim that is stronger than the control is a danger, not a selling point, and the maker who writes it has put the buyer at risk and the business at risk of a recall, a legal action, and a loss of trust that takes years to rebuild.
Trust is the real product in allergen-free foods. An allergic buyer who trusts a brand will buy it every week, will tell other allergic families about it, and will forgive a price that is higher than the ordinary version. A buyer who loses trust, because a food that was called free caused a reaction, will not come back, and will tell other families too. That is why the development team, the quality team, and the marketing team must agree on one claim, one test, and one control, and why the claim is reviewed every time a supplier, a recipe, or a process changes. The food is only as free as its weakest link, and the weakest link is usually the one nobody checked.
Practical note: Choose one raw material you buy often, such as flour, oil, or a spice, and draw its supply chain map on one page: the supplier, the place it is made, the other foods made there, the transport, and the storage. Then mark the link where an allergen is most likely to enter, and write what you would ask the supplier to prove about that link. That map, kept and updated, is the start of supply chain control.
Quick self-check
Question: A supplier changes the mill where your flour is made, but does not tell you. Why is that a problem for allergen management?
Because the new mill may also mill wheat, soy, or another allergen, and the flour may carry that allergen with it. Without change notification, the maker learns about the change from a test result or a complaint, which is too late, and the finished food may already be on sale.
Question: Why is a dedicated line safer than a shared line for an allergen-free food, even when the shared line is cleaned?
Because a dedicated line removes the allergen source altogether, while a shared line depends on cleaning working perfectly every time. Cleaning can fail, a shortcut can be taken, or a test can miss a hidden place, so the dedicated line carries less risk.
Try it yourself
Pick a food you buy that claims to be free of an allergen, such as a biscuit free of milk or a sauce free of gluten. Read the pack and write down three things: the exact claim, the warning about the factory if one is given, and the ingredient list. Then write two questions you would ask the maker before you trusted the claim for a severely allergic person. If the pack gives no factory warning, ask yourself whether that means the factory is free of the allergen, or whether it means the maker has said nothing about the factory. That difference is the difference between a claim and a proof.
Key ideas to carry forward
- Allergens travel through the supply chain in dust, shared silos, shared grinders, shared tankers, and shared warehouses, long before the factory gate.
- A supply chain map names the supplier, the place of making, the other foods made there, the transport, and the storage for each material.
- A supplier agreement gives the allergen statement in writing, the test results behind it, and a promise of change notification before any change happens.
- At the factory gate, the paperwork, the pack, and the label are checked, and a delivery that fails is held, not used.
- Allergen materials are stored apart, in sealed and labelled containers, with dedicated scoops, and spillage is cleaned at once.
- Traceability links every finished batch back to its raw materials and forward to its customers, and the trace is tested once a year.
- Allergen-free development starts with an exact definition, designs the recipe and the process around it, and tests ingredients, trial batches, and normal production over time.
- The claim on the pack must match the control behind it, and trust, once lost by a reaction, takes years to rebuild.
Glossary
Supply chain
The chain of people and places a raw material passes through before it reaches the factory, such as the farm, the mill, and the warehouse. Food tech example: wheat passes through a farm, a mill, and a warehouse before it reaches a bakery.
Supply chain map
A list, for each raw material, of the supplier, the place it is made, the other foods made there, the transport, and the storage. Food tech example: a supply chain map for flour names the mill and the other grains milled there.
Allergen statement
A written statement from a supplier saying which allergens are in a material and which are handled where it is made. Food tech example: an allergen statement for a spice mix lists the allergens in the mix and the allergens handled in the same grinder.
Change notification
A promise from a supplier to tell the maker before changing a source, a place, a process, or a transport route. Food tech example: change notification warns a bakery before its flour mill starts milling a new grain.
Traceability
The ability to follow a food forward to its customers and back to its raw materials, using batch numbers. Food tech example: traceability lets a maker find which biscuits used one batch of flour.
Batch number
A code that names one batch of a material or a food, so it can be traced and held if a problem is found. Food tech example: the batch number on a sack of flour links it to the delivery note and the biscuits made from it.
Dedicated line
A production line used only for one food or one group of foods, so an allergen from another food cannot reach it. Food tech example: a dedicated line for allergen-free biscuits never runs a peanut biscuit.
Allergen-free
A claim that a food is free of a named allergen, which must be defined by the allergen, the test, and the level. Food tech example: a biscuit called free of peanut must be made with peanut-free ingredients on a line proved free of peanut.
Rework
Food from a production run that is put back into a later batch, carrying its allergens with it. Food tech example: biscuit trimmings containing egg that are reworked into a plain batch add egg protein to that batch.
Supplier audit
A visit to a supplier's site to check, with the maker's own eyes, how allergens are controlled there. Food tech example: a supplier audit checks the cleaning, the separation, and the records at a flour mill.
Hold
Keeping a delivery or a batch apart, and not using it, until a check or a test gives a decision. Food tech example: a delivery of flour with a torn sack is put on hold until the receiver decides whether it can be used.
Broker
A trader who buys a material from a maker and sells it on, without making it. Food tech example: a broker who sells flour must still be able to name the mill where the flour was made.
Silo
A large store for grain or flour, where one grain can leave dust that another grain picks up. Food tech example: wheat stored in a silo that held soy can carry soy dust into the next batch.
Cross-contact
The transfer of an allergen from one food or surface to another food that should not contain it. Food tech example: sesame dust in a shared warehouse spreads sesame protein to sacks stored beside it.
Trend
A series of test results over time, watched for a slow rise that warns of a problem before it becomes a failure. Food tech example: a trend of peanut results rising over weeks warns that cleaning is slipping.
References
- Jackson, L. S., Food Allergen Management, 2013.
- Taylor, S. L. and Hefle, S. L., Food Allergies and Intolerances, 2005.
- Food and Agriculture Organization, Food Allergies, 2021.
- Fuller, G. W., New Food Product Development, 2nd edition, 2004.
- Food Product Development, Graf, E. and Saguy, I. S., 1991.