GIFSQ ID: FTN-0106
Circular Food Systems and Waste-to-Value
Unit 1: The Scale of Food Waste
Note
Unit 1: The Scale of Food Waste
A question to start with
A farmer grows a field of carrots. Some are left in the ground because they are the wrong shape. Some are thrown away at the packing shed because they are too small. Some are thrown away at the shop because they are past their best. Some are bought, forgotten in a fridge, and thrown away at home. By the time the field's carrots reach a plate, a large share of them has been wasted, and with them the water, the land, the labour, and the fuel that grew them. How much food is wasted in the world, where does it go, and why does it matter so much? This unit explains the scale of food waste and what it costs.
Food waste is food that is grown, caught, or made, but never eaten, and is thrown away. Food loss is the part of that waste that happens before food reaches the shop, on the farm, in storage, and in the factory. Food waste, in the narrower sense, is the part that happens at the shop and at home. Together, loss and waste describe the whole journey from field to bin, and together they are one of the largest problems in the food system.
The scale is large. A widely reported estimate says that about a third of the food made for people in the world is lost or wasted, and never eaten. The exact share differs from place to place and from food to food, and it is hard to measure with precision, because much waste is never weighed, but the order of size is clear: the waste is not a small leak, it is a large share of all the food made. Fruits and vegetables are wasted most, because they spoil quickly and are easily bruised, while grains are wasted least, because they keep well. Meat and dairy are wasted less in weight, but each kilogram wasted carries a large footprint, because raising animals uses much land, water, and feed.
What food waste costs
Food waste costs in three ways: money, resources, and climate, and each cost is large.
The money cost is the most direct. A farmer who grows food that is never eaten loses the money spent on seed, fertiliser, labour, and fuel. A factory that makes food that is thrown away loses the money spent on making it. A shop that throws food away loses the money it paid for it. A household that throws food away loses the money it spent at the shop. Across the whole system, the money lost to food waste is large, and it is paid by farmers, businesses, and households alike.
The resource cost is the land, water, and energy that went into food that was never eaten. A wasted tomato carries the water that grew it, the land it grew on, and the fuel that carried it. A wasted piece of meat carries the feed that fed the animal, the land that grew the feed, and the water the animal drank. When food is wasted, all of those resources are wasted too, and they cannot be used again. Land used to grow wasted food is land that could have grown food that was eaten, or could have been left as forest or wildlife.
The climate cost is the gases released by growing food that is never eaten, and by rotting food that is thrown away. Growing food releases gases from fertiliser, from animals, and from fuel, and those gases warm the climate whether the food is eaten or not. Food thrown into landfill rots without air and releases methane, a gas that warms the climate far more strongly than carbon dioxide, known as CO₂, over a short time. Food waste is therefore a climate problem as well as a food problem, and cutting waste is one of the cheapest ways to cut climate harm, because the food, the resources, and the gases are all saved at once.
Why food is wasted
Food is wasted for reasons that differ at each step, and the reasons matter, because the fix for one step does not fix another.
On the farm, food is wasted because it is the wrong shape or size for the buyer, because it is damaged by weather or pests, because there is no buyer for it, or because there is no labour to harvest it. A carrot that is bent, a tomato that is too small, and an apple with a mark are all edible, but a buyer who demands a perfect shape will not take them, and the farmer may leave them in the field.
In storage and transport, food is wasted because it spoils, because it is damaged, or because the cold chain breaks. A truck that is late, a store that is too warm, or a box that is crushed can spoil food that was good when it left the farm. Foods that spoil quickly, such as milk, fish, and soft fruit, are the most at risk, and a break in the cold chain can waste a whole load.
In the factory, food is wasted because of trimming, because of mistakes, because of cleaning, and because of overproduction. A factory that trims vegetables loses the trimmings, a factory that makes a wrong batch loses the batch, and a factory that makes more than it can sell loses the extra. Some of this waste is unavoidable, but much of it can be cut by better planning and by finding a use for the trimmings.
In the shop, food is wasted because it passes its date, because it is damaged, because it is overstocked, or because buyers do not want it. A shop that stocks too much of a food that sells slowly will throw the extra away, and a shop that puts fresh food at the front and old food at the back will waste the old food first. Date labels, covered in Unit 2, are a large cause of shop waste, because food is thrown away when its date passes, even when it is still safe to eat.
At home, food is wasted because too much is bought, because it is forgotten, because it is cooked in too large amounts, or because it is not stored well. A household that buys food without a plan, that stores it in the wrong place, or that cooks more than it eats will waste food every week. Home waste is the largest share in many places, because there are many homes, and each one wastes a little, and the little amounts add up to a large total.
Questions to think about
- A farmer leaves bent carrots in the field because the buyer will not take them. Who wastes the carrots, the farmer or the buyer?
- Why does a wasted piece of meat carry a larger footprint than a wasted piece of bread of the same weight?
- A shop throws away food on its date, even though it is still safe. What is the date telling the shop, and what is it not telling it?
Think about the carrot question before you read on
Both share the waste, but the buyer's demand is the cause. The carrots are edible, and the farmer grew them, but the buyer will not take a bent carrot, so the farmer leaves it. The waste is made by a standard that values shape over food, and the fix is to change the standard: sell the bent carrots, use them in cooking, or find a buyer who will take them. The farmer cannot fix it alone, because the buyer sets the rule.
Who wastes most, and why it differs by place
The share of waste at each step differs from place to place, and the difference matters for where the fix should start. In places with less cold storage, less transport, and less processing, more food is lost on the farm, in storage, and in transport, because the food spoils before it reaches a shop. In places with good cold chains, good shops, and plenty of food, more food is wasted at the shop and at home, because the food reaches the buyer safely and is then bought in too large amounts, forgotten, or thrown away when its date passes. Neither pattern is better or worse: each one points to a different fix. A place that loses food on the farm needs better storage, better transport, and better markets. A place that wastes food at home needs better planning, better storage at home, and a better understanding of date labels. A food student should ask where the waste is in the place they are working in, rather than assuming the pattern of one place fits another. The fix follows the waste, and the waste follows the place.
Measuring food waste
Food waste is measured in weight, in money, and in climate impact, and each measure tells a different story. Weight shows how much food is wasted. Money shows what it cost. Climate impact shows the gases released. A business that measures only weight may miss the foods that matter most: a small weight of meat wasted can carry a larger climate impact than a large weight of vegetables wasted, because meat uses more resources per kilogram.
Measuring waste is the first step to cutting it, because a business that does not measure its waste cannot know where it is, or whether it is getting better. The measurement should cover the whole business: what comes in, what is sold, and what is thrown away, and it should be done by type of food and by step, so that the largest waste can be found first. A simple record, kept every day, is better than a complex system that is never used: the weight of food thrown away, the reason it was thrown away, and the step where it was thrown away are enough to start.
Households can measure too: a simple diary of what is thrown away, for one week, shows where the waste is, and the diary often surprises people, because the foods they think they waste are not the foods they actually waste. A household that measures its waste for a week will waste less the next week, because the waste is now visible.
The diagram shows where food is lost and wasted along its journey. The steps point to the diagram: each step wastes food for different reasons, and each step needs a different fix.
Why cutting waste feeds more people
Cutting food waste is one of the simplest ways to feed more people without growing more food. The food that is wasted today, if it were eaten instead, would feed many people, and the land, water, and energy used to grow it would feed them without any new farming. That is why food waste is not only a problem of money or of climate: it is a problem of fairness. In a world where some people do not have enough to eat, throwing away a third of the food made is a waste that cannot be justified, and cutting it is a duty as well as a saving. A food student who learns to cut waste is learning to feed people, not only to save money, and that purpose should stay at the front of every waste plan.
The circular answer, in brief
The rest of this subject is about the circular answer to waste: a food system where nothing is wasted, because what cannot be eaten by people is used for something else, and what cannot be used is returned to the soil. The circular system has a ladder: prevent waste first, then feed people with food that would have been wasted, then feed animals, then make ingredients from side streams, then compost, and then make energy. The lower rungs are better than landfill, but the top rungs are better than the lower ones, and the best food is the food that is never wasted at all. The units that follow climb that ladder, step by step.
Practical note: Keep a food waste diary for one week in your kitchen. Each time food is thrown away, write down what it was, how much, why it was thrown away, and where it came from. At the end of the week, add up the weight and the cost, and find the three foods you wasted most. Write down one change for each one that would stop the waste next week. Bring your diary to class: which foods did the class waste most, and did the reasons match?
Quick self-check
Question: Why is food waste a climate problem as well as a food problem?
Because growing food releases gases whether the food is eaten or not, and food thrown into landfill rots without air and releases methane, which warms the climate strongly. Cutting waste saves the food, the resources, and the gases at once.
Question: Why does measuring waste by weight alone miss part of the story?
Because different foods carry different footprints per kilogram. A small weight of meat wasted can carry a larger climate impact than a large weight of vegetables wasted, so weight alone does not show which waste matters most.
A worked example: what household waste costs in a year
The scale of food waste is easier to feel when it is counted in a household's own money. Work through a simple example with practice numbers. A household buys food worth 100 money units each week, and throws away one tenth of it, which is 10 money units a week.
Step one: count the week. Ten money units a week wasted is the direct cost of the food thrown away.
Step two: count the year. Ten money units a week times 52 weeks is 520 money units a year, thrown away by one household, on food that was bought, carried home, stored, and then binned.
Step three: count what else was wasted. The thrown food also carries the water, energy, and land used to grow it, and the energy used to carry it to the shop and to keep it cold at home. The money counts only the shop price, so the true cost is larger than 520 money units.
Step four: count the saving from a small change. If the household plans its meals and shops with a list, and the waste falls from one tenth to one twentieth, the saving is 5 money units a week, or 260 money units a year, for a change that costs nothing but a few minutes of planning. That is the scale of prevention at home: a small habit, a large saving, repeated in every household in a country.
Try it yourself
Visit a market or a shop and look at the foods that are sold at a lower price because they are near their date, or because they are the wrong shape. Buy one of them if you can, and cook with it the same day. Write down what you bought, what you paid, what you made, and whether the food was as good as the perfect version. Then write a short note: what would happen if every shopper bought one such food each week, and what stops shoppers from doing it now?
Key ideas to carry forward
- About a third of the food made for people is lost or wasted, as a widely reported estimate, and never eaten.
- Food loss happens before the shop, on the farm, in storage, and in the factory; food waste happens at the shop and at home.
- Waste costs money, resources such as land and water, and climate, through the gases of growing and of rotting in landfill.
- Each step wastes food for different reasons, and each step needs a different fix.
- Fruits and vegetables are wasted most by weight, while meat and dairy carry a large footprint per kilogram wasted.
- Measuring waste, by weight, by money, and by climate impact, is the first step to cutting it.
- The circular answer is a ladder: prevent waste first, then feed people, animals, and soil, in that order.
Glossary
Food waste
Food that is grown, caught, or made, but never eaten, and is thrown away. Food tech example: bread bought and forgotten in a fridge, then thrown away, is food waste.
Food loss
The part of food waste that happens before food reaches the shop, on the farm, in storage, and in the factory. Food tech example: carrots left in the field because they are the wrong shape are food loss.
Cold chain
The series of chilled or frozen steps that keep a food cold from the farm to the shop. Food tech example: a break in the cold chain can spoil a whole load of milk.
Methane
A gas made when organic material breaks down without air, which warms the climate. Food tech example: food rotting in landfill makes methane.
Carbon dioxide
A gas released by growing, making, and moving food, with the formula CO₂. Food tech example: fuel burned to carry food releases CO₂.
Footprint
The total impact of a product on the environment, across its whole life. Food tech example: a wasted piece of meat carries a larger footprint than a wasted piece of bread.
Side stream
A material left over from making a food, such as peels, husks, or whey. Food tech example: peels from a juice factory are a side stream.
Circular food system
A food system where nothing is wasted, because what cannot be eaten is used for something else. Food tech example: peels become ingredients, feed, or compost in a circular system.
Overproduction
Making more food than can be sold, so that the extra is thrown away. Food tech example: a factory that makes more bread than shops order wastes the extra.
Date label
The date on a pack that tells the buyer when the food should be eaten by. Food tech example: a shop throws food away when its date label passes, even when it is still safe.
Trimming
Cutting off the outer parts of a food during making, which leaves waste. Food tech example: trimming vegetables in a factory leaves peelings and ends.
Climate impact
The effect of a product on the climate, through the gases it releases. Food tech example: the climate impact of wasted food includes the gases of growing it and of rotting it.
References
- Food and Agriculture Organization, Food Loss and Food Waste, 2019.
- Food and Agriculture Organization, The State of Food and Agriculture, 2019.
- Verghese, K., et al., Packaging for Sustainability, 2015.
- Gustavsson, J., et al., Global Food Losses and Food Waste, 2011.
- Ellen MacArthur Foundation, Cities and Circular Economy for Food, 2019.
Unit 2: Where Waste Happens, Farm, Factory, Shop, Home
Note
Unit 2: Where Waste Happens, Farm, Factory, Shop, Home
A question to start with
A loaf of bread is baked in a factory, sent to a shop, bought by a family, and half of it is thrown away at home because it went stale. The factory also threw away dough, the shop threw away loaves that passed their date, and the farm threw away wheat that was never harvested. The waste happened at four places, for four different reasons, and the fix at one place does not fix the others. Where exactly does food waste happen, and what is the fix at each place? This unit walks the food journey step by step, from farm to home, and shows the waste and the fix at each step.
The food journey has five steps: farm, storage and transport, factory, shop, and home. Each step wastes food in its own way, and each step needs its own fix. A student who knows the steps can find the waste in any food, and can choose the fix that fits the step, rather than blaming one step for the waste of another.
Farm: the first waste
On the farm, waste happens before food is even picked. Crops are left in the field because they are the wrong shape or size for the buyer, because they are damaged by weather, pests, or disease, because there is no buyer for them, or because there is no labour to harvest them. Animals are wasted less often on the farm, but milk can be wasted when there is no buyer or no transport, and eggs can be wasted when they are cracked or dirty.
The shape and size standard is the largest cause of farm waste that can be fixed. Buyers, often shops, demand fruit and vegetables of a set shape and size, because they stack well, look good, and sell well. A carrot that is bent, a tomato that is small, and a potato that is oddly shaped are all edible, but they are left in the field because the buyer will not take them. The fix is to change the standard: sell the odd shapes at a lower price, use them in cooking where shape does not matter, or find a buyer who will take them, such as a factory that makes soup or juice.
Weather and pests are harder to fix, but they can be cut by better farming: planting the right crop for the place, watering well, controlling pests without harming the crop, and harvesting at the right time. A crop harvested too late is overripe and spoils quickly, and a crop harvested too early is unripe and may never ripen. The right harvest time is a skill, and it saves food.
Labour is a growing cause of farm waste in many places. A crop that is ready must be picked quickly, and if there are not enough workers, the crop stays in the field and spoils. The fix is planning: planting so that crops ripen at different times, using machines where they can help, and paying workers fairly so that they come back. A farm that cannot harvest its crop cannot sell it, whatever its quality.
Storage and transport: the cold chain
After harvest, food must be stored and carried, and much waste happens here. Food spoils when it is stored too warm, too damp, or for too long. Grain stored damp grows mould, and the mould makes mycotoxins, covered in the Food Fraud subject, which can make the whole store unsafe. Fruit stored too warm ripens too fast and spoils. Milk stored too warm grows bacteria and turns sour.
The cold chain is the series of chilled or frozen steps that keep food cold from the farm to the shop, and it is the main defence against spoiling for foods that need chilling: milk, meat, fish, and soft fruit. A break in the cold chain, a truck that is late, a store that is too warm, or a fridge that fails, can spoil a whole load, and the load must be thrown away. The fix is to keep the chain unbroken: chill food quickly after harvest, keep it cold in storage and in transport, and check the temperature at each step. A simple temperature logger in a truck can prove that the chain held, and can find the step where it broke.
Damage in transport is another cause. Food that is packed badly, stacked badly, or carried on a rough road is bruised and broken, and bruised food spoils faster. The fix is better packaging, covered in the Sustainable Food Packaging subject, and better handling: pack food so that it does not move, stack it so that it does not crush, and carry it so that it does not shake.
Factory: trimming, mistakes, and overproduction
In the factory, food is wasted by trimming, by mistakes, by cleaning, and by overproduction. Trimming is the cutting off of outer parts: peels, husks, ends, and bones. Some trimming is unavoidable, because the outer part cannot be eaten, but much trimming can be cut by better cutting, by using the trimmings for another product, and by choosing varieties that trim less. The trimmings themselves are not waste if they are used, and Units 3 and 4 of this subject show how side streams become ingredients.
Mistakes waste whole batches: a wrong ingredient, a wrong temperature, a wrong time, or a failed test can spoil a batch that must be thrown away. The fix is good manufacturing practice: written recipes, trained staff, checked measurements, and tests that catch a mistake early, before the whole batch is made. A mistake caught after one hour wastes one hour of work; a mistake caught after a day wastes a day.
Cleaning wastes food too, because the food left in pipes, tanks, and machines at the end of a run must be thrown away or washed out. The fix is to plan runs so that the same food is made in long runs, to recover the food left in the system where it is safe, and to clean with as little food loss as possible. A factory that changes products often wastes more in cleaning than a factory that makes one product for a long run.
Overproduction is the factory waste that is easiest to fix and hardest to admit. A factory that makes more than it can sell, because it hoped for more orders, or because it did not want to run out, will throw the extra away. The fix is better planning: make what is ordered, make it close to the time it is needed, and keep a small stock rather than a large one. A factory that makes to order wastes less than a factory that makes to hope.
Questions to think about
- A shop demands carrots of one shape and size. What happens to the carrots that do not match, and who could use them?
- A truck carrying milk is late and the milk warms up. What should the driver do, and what should the shop do when the milk arrives?
- A factory makes a wrong batch and throws it away. What would have caught the mistake earlier, and how much would it have saved?
Think about the carrot question before you read on
The carrots that do not match are left in the field, or thrown away at the packing shed, even though they are edible. They could be used by a factory that makes soup or juice, where shape does not matter, or sold at a lower price as odd shapes, or cooked at home. The fix is to find a buyer for the odd shapes, so that the farmer is paid for them and the food is eaten.
Shop: dates, display, and overstocking
In the shop, food is wasted because it passes its date, because it is damaged, because it is overstocked, or because buyers do not want it. The date label is the largest cause of shop waste, and it needs care to understand.
Two dates are used on food, and they mean different things. A use by date is about safety: the food should not be eaten after that date, because it may not be safe. A best before date is about quality: the food may still be safe after that date, but it may not taste as good. Many buyers, and many shops, treat the two dates the same, and throw food away when its best before date passes, even though it is still safe. The fix is to teach the difference, and to use the food after its best before date where it is still good, by tasting and smelling it, and by cooking it well.
Display wastes food too. A shop that puts fresh food at the front and old food at the back will sell the fresh food first and waste the old food. A shop that fills a display to look full will throw away the food that does not sell before it spoils. The fix is to put old food at the front, to fill displays with what will sell, and to reduce the price of food near its date so that buyers take it home and eat it.
Overstocking is the shop version of overproduction: a shop that stocks too much of a slow selling food will throw the extra away. The fix is to order what sells, to order often in small amounts rather than rarely in large amounts, and to watch what sells and what does not, week by week. A shop that knows its buyers wastes less than a shop that guesses.
Home: buying, storing, and cooking
At home, food is wasted because too much is bought, because it is forgotten, because it is cooked in too large amounts, or because it is stored badly. Home waste is the largest share in many places, because there are many homes, and each one wastes a little, and the little amounts add up.
Buying too much is the first cause. A shopper who buys without a list, who buys because food is on offer, or who buys for a meal that is never cooked will waste food. The fix is to plan: write a list, buy what the list says, and buy often in small amounts rather than rarely in large amounts. A shopper who buys for the week ahead wastes less than a shopper who buys for the month ahead.
Forgetting is the second cause. Food bought and put in a fridge, then forgotten behind other food, will spoil and be thrown away. The fix is to store food where it can be seen, to put new food behind old food, and to check the fridge once a week and cook what is oldest first. A fridge that is organised wastes less than a fridge that is full and forgotten.
Cooking too much is the third cause. A cook who makes more than the family eats will throw the extra away, unless it is saved for another meal. The fix is to cook the right amount, to save leftovers safely, and to use leftovers in another meal the next day. A leftover that is eaten is not waste; a leftover that is thrown away is.
Storing badly is the fourth cause. Food stored in the wrong place, at the wrong temperature, or in an open pack will spoil faster. The fix is to learn how each food should be stored: which foods go in the fridge, which go in a cool dark place, and which need a sealed container. A food stored well lasts longer, and a food that lasts longer is less likely to be wasted.
The diagram shows the fix at each step of the food journey. The steps point to the diagram: each step wastes food for different reasons, so each step needs its own fix, and a fix at one step does not fix the others.
The waste hierarchy at each step
At every step, the same order applies: prevent waste first, then find a use for food that would have been wasted, then use it for animals or for ingredients, then compost, and then make energy. Landfill is the last choice, not the first. A farm that prevents waste by selling odd shapes does better than a farm that composts them. A shop that prevents waste by reducing prices near the date does better than a shop that gives the food away. A home that prevents waste by planning does better than a home that composts it. Prevention is the top of the ladder at every step, and the lower rungs are for the waste that cannot be prevented.
Practical note: Choose a food you eat often, such as bread, milk, or a vegetable, and trace its journey from farm to home. At each step, write down one way it can be wasted and one fix for that waste. Then mark the step where you think the most waste happens for that food, and explain why. Bring your trace to class and compare: which foods waste most at the farm, and which waste most at home?
Quick self-check
Question: What is the difference between a use by date and a best before date?
A use by date is about safety: the food should not be eaten after that date. A best before date is about quality: the food may still be safe after that date, but it may not taste as good. Treating the two as the same wastes food that is still safe to eat.
Question: Why is overproduction in a factory hard to admit but easy to fix?
Because it means the factory made more than it could sell, which is a planning failure, and factories do not like to admit planning failures. It is easy to fix by making to order and keeping a small stock, but the fix needs honest planning and a willingness to make less.
Try it yourself
Keep a diary for three days of every food you throw away at home: what it was, how much, why it was thrown away, and where it was stored. At the end of the three days, sort the waste into four groups: bought too much, forgotten, cooked too much, and stored badly. Which group is largest for you, and what one change would cut it most? Bring your diary to class and compare: which group is largest for the class, and what does that tell you about where home waste comes from?
Key ideas to carry forward
- The food journey has five steps: farm, storage and transport, factory, shop, and home, and each wastes food for different reasons.
- On the farm, shape standards, weather, pests, and labour cause waste; selling odd shapes and harvesting at the right time cut it.
- In storage and transport, a broken cold chain and bad packing spoil food; keeping the chain unbroken and packing well cut it.
- In the factory, trimming, mistakes, cleaning, and overproduction waste food; better cutting, early checks, and making to order cut it.
- In the shop, dates, display, and overstocking waste food; teaching the two dates and putting old food first cut it.
- At home, buying too much, forgetting, cooking too much, and storing badly waste food; planning, storing well, and eating leftovers cut it.
- At every step, prevent waste first, then find a use for what would have been wasted.
Glossary
Use by date
A date on a pack after which the food should not be eaten, because it may not be safe. Food tech example: milk past its use by date should not be drunk.
Best before date
A date on a pack after which the food may still be safe but may not taste as good. Food tech example: biscuits past their best before date may be soft but still safe to eat.
Cold chain
The series of chilled or frozen steps that keep a food cold from the farm to the shop. Food tech example: a break in the cold chain can spoil a whole load of milk.
Overstocking
Stocking more food than will sell, so that the extra is thrown away. Food tech example: a shop that over-stocks a slow selling food wastes the extra.
Overproduction
Making more food than can be sold, so that the extra is thrown away. Food tech example: a factory that makes more bread than shops order wastes the extra.
Trimming
Cutting off the outer parts of a food during making, which leaves waste. Food tech example: trimming vegetables in a factory leaves peelings and ends.
Side stream
A material left over from making a food, such as peels, husks, or whey. Food tech example: peels from a juice factory are a side stream.
Good manufacturing practice
The discipline of making food the same way every time, with records and checks. Food tech example: good manufacturing practice catches a mistake early, before a whole batch is wasted.
Mycotoxin
A poison made by a mould growing on food. Food tech example: grain stored damp grows mould that makes mycotoxins.
Leftover
Food cooked but not eaten at a meal, which can be saved for another meal. Food tech example: a leftover that is eaten is not waste.
Display
How food is shown in a shop, which decides what sells first. Food tech example: putting old food at the front of a display sells it first.
Harvest time
The time when a crop is picked, which decides its quality and how long it keeps. Food tech example: a crop harvested too late is overripe and spoils quickly.
References
- Food and Agriculture Organization, Food Loss and Food Waste, 2019.
- Gustavsson, J., et al., Global Food Losses and Food Waste, 2011.
- Food and Agriculture Organization, The State of Food and Agriculture, 2019.
- Ellen MacArthur Foundation, Cities and Circular Economy for Food, 2019.
- Parfitt, J., Barthel, M. and Macnaughton, S., Food Waste Within Food Supply Chains, 2010.
Unit 3: Upcycling Side Streams, Fibres, Emulsifiers, Texturants
Note
Unit 3: Upcycling Side Streams, Fibres, Emulsifiers, Texturants
A question to start with
A juice factory presses oranges and is left with tonnes of peel, pulp, and seeds. A brewery makes beer and is left with tonnes of spent grain. A mill grinds wheat and is left with tonnes of bran. For years, these leftovers were thrown away or sold cheaply as animal feed. Now they are being turned into fibres, emulsifiers, and texturants that go back into food, adding nutrition and texture while cutting waste. How does a leftover become an ingredient, and what decides whether it is worth doing? This unit explains upcycling: turning side streams into food ingredients.
Upcycling is using a side stream, a material left over from making a food, to make a new food or a new ingredient, at a value higher than the side stream had before. It is different from recycling, which turns a material into the same kind of material again, and different from composting, which turns it into soil. Upcycling keeps the material as food, or turns it into a food ingredient, so that the value stays in the food system and the waste is cut at the same time.
The side streams of food making are large. Fruit and vegetable processing leaves peels, pulp, seeds, and trimmings. Grain milling leaves bran, husks, and germ. Brewing leaves spent grain and yeast. Dairy leaves whey. Oil pressing leaves seed cake. Meat processing leaves bones and trimmings. Each side stream carries nutrients: fibre, protein, oil, minerals, and flavour, and each one can become an ingredient if it is handled well, tested for safety, and made into a form that food makers can use.
Fibres from side streams
Fibre is the part of plant food that the body cannot digest, but that feeds the gut and helps the body work well. Side streams are rich in fibre, and fibre is one of the easiest upcycled ingredients to make, because it needs only drying, milling, and sieving to become a powder that can be added to bread, biscuits, pasta, and drinks.
Citrus peel is a good example. Orange and lemon peel, left after juicing, carry fibre and pectin, and when dried and milled they become a fibre powder that adds bulk and softness to baked goods. The peel must be washed well, because it can carry sprays from the orchard, and it must be dried quickly, because it spoils fast. The fibre is tested for safety, and the powder is sold to bakers who use it to raise the fibre in their bread without changing the taste much.
Wheat bran is another example. Bran is the outer layer of wheat, left after milling white flour, and it carries fibre, minerals, and vitamins. Bran has long been sold as a food in its own right, and it is now also milled finely and added to bread, cereals, and biscuits to raise their fibre. The bran must be kept dry and cool, because its oil can go rancid, and it must be tested for mycotoxins, because bran carries more of them than white flour.
Spent grain from brewing is a third example. After beer is made, the grain left behind carries fibre and protein, and when dried and milled it becomes a flour that adds fibre and a nutty flavour to bread and biscuits. The grain must be dried quickly after brewing, because it is wet and spoils fast, and it must be handled as food, not as waste, so that it stays clean and safe.
Emulsifiers and texturants from side streams
An emulsifier is a substance that lets oil and water mix and stay mixed, such as in mayonnaise, dressings, and sauces. A texturant is a substance that gives food its texture: thickness, smoothness, or firmness, such as in yoghurt, ice cream, and soups. Both are usually made from purpose grown crops, but both can be made from side streams, and that is where upcycling adds value.
Pectin is the best known texturant from a side stream. Pectin is the substance that makes jam set, and it is made from citrus peel and apple pomace, the pulp left after pressing apples for juice. The peel and pomace are treated with hot water and acid, the pectin is extracted, and it is dried into a powder that jam makers and yoghurt makers buy. Pectin from side streams is the same as pectin from any other source, and it is a classic upcycling success: a waste that became an ingredient used around the world.
Lecithin is an emulsifier made from oilseed side streams, most often from the cake left after pressing oil from seeds. Lecithin lets oil and water mix, and it is used in chocolate, margarine, and baked goods. It is extracted from the seed cake, purified, and sold as a liquid or a powder. The lecithin must be tested for safety, and it must be labelled as an allergen where it comes from a seed that is an allergen, such as soy.
Proteins from side streams can also act as emulsifiers and texturants. Whey protein, from the liquid left after making cheese, can thicken and stabilise foods, and pea protein from the side streams of pea processing can do the same. These proteins are extracted, dried, and sold as powders, and they are used in drinks, bars, and baked goods. The protein must be tested for its amino acids, for its allergens, and for its digestibility, because a protein that is not digested well does not feed people as claimed.
How upcycling is done: the steps
Upcycling a side stream follows the same steps whatever the stream is, and the steps decide whether it is worth doing.
The first step is to know the stream: what is it, how much is there, how often does it arise, and what does it contain? A side stream that arises in small amounts, rarely, and with a changing composition is hard to upcycle, because the ingredient made from it will vary. A side stream that arises in large amounts, every day, with a steady composition is easy to upcycle, because the ingredient will be the same every time.
The second step is to keep it as food. A side stream that is handled as waste, thrown in a dirty bin, left warm and wet, or mixed with non food waste, cannot become a food ingredient, because it is no longer safe. A side stream that is handled as food, kept clean, chilled or dried quickly, and kept apart from waste, can become an ingredient. The change is in handling, not in the stream itself, and it costs little to make, but it decides everything.
The third step is to process it. The stream is washed, dried, milled, extracted, or fermented, depending on the ingredient wanted. The process must be safe, must be the same every time, and must be tested: does the ingredient have the fibre, the protein, or the texture claimed, and does it carry anything harmful? The process must also be affordable: an ingredient that costs more to make than a purpose grown ingredient will not sell, unless buyers will pay more for the story of upcycling.
The fourth step is to sell it. The ingredient must be sold to a food maker who can use it, in a form the maker can handle, with a specification that names its composition, its safety, and its shelf life. The maker must be able to trust that the ingredient will be the same every time, and the buyer of the finished food must be able to read the label and know that the ingredient came from a side stream, if the maker chooses to say so.
Questions to think about
- A juice factory throws its peel in a dirty bin and leaves it warm overnight. Can the peel still be upcycled into fibre, and why?
- Why is pectin from citrus peel a classic upcycling success, while other side streams are harder to use?
- A spent grain flour costs more than ordinary flour. When would a baker still buy it, and when would they not?
Think about the peel question before you read on
No, not into a food ingredient. The peel was handled as waste, left warm and wet in a dirty bin, so microbes have grown on it and it may carry dirt and other waste. It can still be composted or used for energy, but it cannot become a food ingredient, because food safety needs the stream to be kept clean and handled as food from the start. The change that would have saved it is simple: keep the peel clean, chill or dry it quickly, and keep it apart from waste.
Fibre in the diet: why upcycled fibre matters
Fibre from side streams matters not only because it cuts waste, but because many people eat too little fibre. Fibre feeds the gut, helps the body work well, and slows how fast food is digested, which helps with fullness and with blood sugar. A bread, biscuit, or pasta that carries more fibre from citrus peel, bran, or spent grain gives the eater more of a nutrient they may lack, without changing the food much. The fibre must be added in the right amount: too little, and it makes no difference; too much, and the bread becomes heavy, dry, or gritty, and buyers will not eat it. The maker should test the food with the fibre added, and should name the fibre on the label, so that buyers who want more fibre can find it and buyers who do not want it can choose another food. Upcycled fibre is therefore a nutrition gain as well as a waste cut, and that double gain is what makes it worth doing.
Safety and labelling of upcycled ingredients
Upcycled ingredients must meet the same safety rules as any food ingredient. They must be tested for microbes, for mycotoxins where the stream can carry them, for heavy metals where the stream can carry them, and for allergens where the stream comes from an allergenic food. A citrus peel fibre must be tested for sprays, a wheat bran must be tested for mycotoxins, and a soy lecithin must be labelled as an allergen. The tests are the same as for any ingredient, and the limits are the same.
Labelling of upcycled ingredients is a newer question. A food that contains an upcycled ingredient must name the ingredient on its label, as it would name any ingredient, and it may say that the ingredient is upcycled, if that claim is true and can be proved. The claim should not mislead: a bread that contains a small amount of upcycled fibre should not claim to be a waste free bread, and a food that contains an upcycled ingredient should not hide that the ingredient came from a side stream where the buyer would want to know. The honest label names the ingredient and lets the buyer decide.
When upcycling is worth it, and when it is not
Upcycling is worth it when the side stream is large, steady, and clean, when the ingredient it makes is wanted, and when the process is affordable. It is not worth it when the stream is small, variable, or dirty, when the ingredient has no buyer, or when the process costs more than the ingredient is worth. A food business should work out the numbers before it starts: how much stream is there, what will the ingredient sell for, what will the process cost, and what will happen to the stream if it is not upcycled?
Upcycling is also worth it when it cuts waste that would otherwise be thrown away. A side stream that goes to landfill carries a cost in disposal and in methane, and upcycling avoids that cost. A side stream that is already used as animal feed is not waste, and upcycling it into a food ingredient may take feed from animals, which is a different trade off that must be weighed. The best upcycling takes a stream that is truly wasted and turns it into a food, not a stream that already has a good use.
The diagram shows the upcycling chain. The steps point to the diagram: the chain breaks if the stream is handled as waste, because a dirty stream cannot become a food ingredient, whatever the process.
Practical note: Pick a food factory you know or can read about: a juice factory, a brewery, a mill, or a dairy. Write down its side streams, what each one contains, and what ingredient it could become. Then pick one stream and write a short upcycling plan: how would you keep it as food, how would you process it, what would you test, and who would buy the ingredient? Keep the plan with your waste diary from Unit 1.
Quick self-check
Question: What is the difference between upcycling and composting a side stream?
Upcycling keeps the material as food or turns it into a food ingredient, so its value stays in the food system. Composting turns it into soil, which is useful but lower in value than food. Upcycling sits higher on the waste ladder than composting.
Question: Why must a side stream be handled as food from the start if it is to be upcycled?
Because a stream handled as waste, left warm, wet, or dirty, grows microbes and picks up dirt, and it can no longer be proved safe as food. Handling it as food, clean and chilled or dried quickly, keeps it safe and makes upcycling possible.
Try it yourself
Take a food from your kitchen that leaves a side stream when you cook it: an orange, a potato, a cauliflower, or a chicken. Cook it as usual, and keep the peel, the leaves, or the bones that you would normally throw away. Find one use for the side stream as food: a stock from bones, a crisps from peels, or a soup from leaves. Cook it, taste it, and write down whether it worked and whether you would do it again. Bring your notes to class: which side streams were easiest to use at home, and which ones need a factory to be worth it?
Key ideas to carry forward
- Upcycling turns a side stream into a food or a food ingredient at a higher value than the stream had before.
- Side streams carry fibre, protein, oil, minerals, and flavour, and each can become an ingredient if handled well.
- Fibres from citrus peel, wheat bran, and spent grain add nutrition to bread, biscuits, and cereals.
- Pectin from citrus peel and apple pomace, and lecithin from oilseed cake, are emulsifiers and texturants from side streams.
- The upcycling chain is to know the stream, keep it as food, process it, test it, and sell it with a specification.
- Upcycled ingredients must meet the same safety rules as any ingredient, and their labels must be honest.
- Upcycling is worth it when the stream is large, steady, clean, and truly wasted, and the ingredient has a buyer.
Glossary
Upcycling
Using a side stream to make a new food or ingredient at a higher value than the stream had before. Food tech example: citrus peel turned into fibre powder for bread is upcycling.
Side stream
A material left over from making a food, such as peels, husks, or whey. Food tech example: peels from a juice factory are a side stream.
Fibre
The part of plant food that the body cannot digest, but that feeds the gut and helps the body work well. Food tech example: wheat bran is rich in fibre.
Emulsifier
A substance that lets oil and water mix and stay mixed. Food tech example: lecithin lets oil and water mix in chocolate.
Texturant
A substance that gives food its texture: thickness, smoothness, or firmness. Food tech example: pectin gives jam its set.
Pectin
A texturant from citrus peel and apple pomace that makes jam set. Food tech example: pectin extracted from orange peel is used in jam.
Lecithin
An emulsifier from oilseed side streams that lets oil and water mix. Food tech example: lecithin from seed cake is used in chocolate.
Spent grain
The grain left after brewing beer, rich in fibre and protein. Food tech example: spent grain dried and milled becomes a flour for bread.
Apple pomace
The pulp left after pressing apples for juice. Food tech example: apple pomace is a source of pectin.
Whey
The liquid left after making cheese, rich in protein. Food tech example: whey protein is extracted from the liquid left after cheese making.
Specification
A written statement of what an ingredient must be: its composition, safety, and shelf life. Food tech example: a fibre powder is sold with a specification naming its fibre and its moisture.
Allergen
A substance in food that can cause an allergic reaction in some people. Food tech example: soy lecithin must be labelled as an allergen.
References
- Food and Agriculture Organization, Food Loss and Food Waste, 2019.
- Ellen MacArthur Foundation, Cities and Circular Economy for Food, 2019.
- Galanakis, C. M., Food Waste Recovery, 2015.
- Mirabella, N., Castellani, V. and Sala, S., Current Options for the Valorization of Food Manufacturing Waste, 2014.
- Sagar, N. A., et al., Fruit and Vegetable Waste, 2018.
Unit 4: By-products into Ingredients, Examples
Note
Unit 4: By-products into Ingredients, Examples
A question to start with
A dairy makes cheese and is left with a pale liquid called whey. A tomato factory makes sauce and is left with skins and seeds. A fish factory fillets fish and is left with heads, bones, and skins. Each leftover was once thrown away. Now each one is an ingredient: whey protein in a drink, tomato fibre in a sauce, fish oil in a capsule, and collagen from fish skins in a food. How does a by-product become an ingredient, and which by-products are the best examples to learn from? This unit gives examples, one by one, of by-products turned into ingredients.
A by-product is a material made alongside the main product, in the same process. It is different from waste, because it has a use, and different from a side stream only in name: the two words are used for the same idea in different industries. The examples in this unit are chosen because they show the range of what is possible, from dairy to fish, from fruit to grain, and because each one teaches a lesson about safety, processing, and selling.
Whey: from cheese liquid to protein
Whey is the liquid left after milk is curdled to make cheese. For every kilogram of cheese, many kilograms of whey are made, and for years the whey was thrown away, or fed to animals, or spread on fields. Whey carries protein, lactose, minerals, and vitamins, and it is now one of the most valuable by-products in food.
Whey is processed by filtering, to separate the protein from the lactose and water, and by drying, to make whey protein powders. The powders are sold by their protein level: whey protein concentrate, with a moderate protein level, and whey protein isolate, with a high protein level and little lactose. The powders are used in drinks, bars, yoghurts, and baked goods, where they add protein, thicken, and stabilise.
The lesson of whey is scale and steady supply. Cheese is made every day, in large amounts, in many places, so whey arises in large amounts, every day, with a steady composition. That steadiness made it worth building filters and dryers for, and the ingredient became cheap enough to sell widely. Whey also teaches that a by-product can become more valuable than the main product in some cases, and that a dairy that throws whey away is throwing money away.
Whey must be handled as food from the start: it is collected clean, chilled quickly, and processed soon, because it spoils fast. It must be tested for microbes, and the powders must be tested for protein, lactose, and moisture. Whey protein is an allergen for people with a milk allergy, because it is a milk protein, and it must be labelled as such.
Tomato skins and seeds: fibre, colour, and oil
A tomato factory that makes sauce, paste, or juice is left with skins and seeds. The skins carry fibre and lycopene, the red colour that gives tomatoes their colour and that is studied for its health properties. The seeds carry oil and protein.
The skins are dried and milled into a fibre powder, which adds fibre and colour to sauces, soups, and baked goods. The lycopene is extracted from the skins and sold as a colour and as an ingredient, where it gives a red colour without a synthetic dye. The seeds are pressed for oil, and the oil is used in dressings and in cooking, while the seed meal left after pressing carries protein and is used in feed and in foods.
The lesson of tomato by-products is that one by-product can give several ingredients. The skins give fibre and colour, the seeds give oil and protein, and the factory that separates them well earns more than the factory that throws them away together. The lesson is also about timing: tomato skins spoil fast, so they must be dried quickly, and the factory must be built to handle them as food, not as waste.
Fish heads, bones, and skins: oil, collagen, and minerals
A fish factory that fillets fish is left with heads, bones, skins, and trimmings, which can be more than half the weight of the fish. These by-products carry oil, protein, collagen, and minerals, and they are now used in food, in feed, and in other products.
Fish oil is extracted from the heads and trimmings, and it is rich in omega 3 fatty acids, which are used in capsules, in drinks, and in foods. The oil must be extracted cleanly, kept cold, and protected from air, because it goes rancid quickly, and it must be tested for heavy metals and for other contaminants that fish can carry. Fish oil from a clean source, tested well, is a valuable ingredient; fish oil from a dirty source is a risk.
Collagen is extracted from fish skins and bones, and it is used in foods, drinks, and gels, where it thickens and stabilises. Collagen from fish is an alternative to collagen from land animals, and it is used where a fish source is wanted. The skins must be cleaned well, and the collagen must be tested for safety, because fish skins can carry microbes and contaminants from the sea.
Fish bones are dried and milled into a mineral powder rich in calcium, which is used in foods and in supplements. The bones must be cleaned and heated to make them safe, and the powder must be tested for heavy metals, because bones can carry lead and cadmium from the water the fish lived in. The lesson of fish by-products is that the most valuable ingredients need the most careful testing, because the sea that gave the fish its nutrients also gave it its contaminants.
Questions to think about
- Whey arises every day in large amounts with a steady composition. Why does that steadiness make it worth building a factory for?
- A tomato factory throws its skins and seeds away together. What value is it losing, and what would it need to change to earn it?
- Fish oil is valuable but goes rancid quickly. What must the factory do to keep it good, and what must it test for?
Think about the whey question before you read on
Because a factory costs money to build, and it only pays if it runs every day on a steady supply. Whey arises every day, in large amounts, with the same composition, so the filters and dryers can run all the time and make the same ingredient every time. A by-product that arises rarely, in small amounts, with a changing composition cannot pay for a factory, because the factory would stand idle and the ingredient would vary.
Grain and oilseed by-products
Grain milling leaves bran, husks, and germ. Bran, covered in Unit 3, is fibre for bread and cereals. Germ, the small part of the grain that would grow into a new plant, carries oil, protein, and vitamins, and wheat germ oil is pressed from it and sold as an oil and as an ingredient. The germ must be handled quickly, because its oil goes rancid fast, and it must be kept cool and dry.
Oilseed pressing leaves seed cake, the solid left after oil is pressed from seeds such as sunflower, rapeseed, and soy. The cake carries protein and fibre, and it is milled into flours and protein powders for food and for feed. The cake must be tested for safety, because some seeds carry natural toxins that must be removed or kept below a limit, and it must be labelled for allergens where the seed is an allergen.
Brewing leaves spent grain and spent yeast. Spent grain, covered in Unit 3, becomes flour for bread. Spent yeast, the yeast left after beer is made, carries protein and B vitamins, and it is dried into a powder used in spreads, soups, and seasonings. The yeast must be dried quickly, and it must be tested for safety, because it is a microbe, and the powder must be labelled clearly so that buyers know what it is.
Fruit and vegetable by-products
Fruit and vegetable processing leaves peels, pulp, seeds, and trimmings, and each one can become an ingredient. Citrus peel becomes fibre and pectin, covered in Unit 3. Apple pomace becomes pectin and fibre. Grape pomace, left after pressing grapes for juice or wine, carries fibre, colour, and antioxidants, and it is dried and milled into a powder for baked goods and drinks. Banana peel, often thrown away, carries fibre and minerals, and it is dried and milled into a flour in some places. Onion skins carry colour and flavour, and they are used in stocks and seasonings.
The lesson of fruit and vegetable by-products is that the peel and the pulp often carry more of a nutrient than the flesh. The skin of a fruit carries fibre and colour, the seeds carry oil and protein, and the pulp carries flavour. Throwing away the peel is throwing away the most nutritious part, and using it is both a waste cut and a nutrition gain. The by-product must be washed well, because the skin is where sprays and dirt sit, and it must be dried quickly, because it spoils fast.
Coffee grounds and other everyday by-products
Coffee grounds are a by-product many people meet every day. A cafe makes coffee and is left with wet grounds, which carry fibre, oil, and flavour. The grounds can be dried and milled into a flour for baked goods, where they add a coffee flavour and fibre, or they can be composted, or used as a soil improver, or turned into energy. The grounds must be dried quickly, because they are wet and grow mould fast, and they must be handled as food if they are to become a food ingredient. The lesson of coffee grounds is that by-products are not only found in large factories: they arise in cafes, in restaurants, and in homes, and the same rules apply at every size. A small cafe that dries its grounds and sells them to a baker is doing the same work as a large factory that dries its spent grain, only smaller, and the gain is the same in kind: waste cut, value gained, and a new ingredient made.
Bones, trimmings, and stocks
Meat processing leaves bones, trimmings, and fat, and these too can become ingredients. Bones are boiled into stocks and broths, which carry flavour and minerals, and the stock is sold as a food in its own right or used in soups and sauces. Trimmings are minced into sausages, pies, and ready meals, where they are used whole rather than thrown away. Fat is rendered into cooking fat and into ingredients for pastry and for frying. The lesson of meat by-products is that the whole animal should be used, and that the parts once thrown away can become foods that buyers want, when they are handled well and cooked well. The by-products must be kept cold, processed quickly, and tested for safety, because meat spoils fast, and the foods made from them must be labelled clearly so that buyers know what they are eating. A butcher who uses the whole animal wastes less, earns more from each animal, and honours the animal by wasting none of it.
What makes a by-product succeed
The examples together give a short list of what makes a by-product succeed as an ingredient. The by-product must arise in large amounts, often, with a steady composition. It must be handled as food from the start, kept clean and processed quickly. It must be processed by a method that is safe, affordable, and the same every time. It must be tested for safety, for composition, and for allergens. It must be sold to a maker who can use it, in a form the maker can handle, with a specification the maker can trust. And it must be labelled honestly, so that the buyer knows what it is.
A by-product that fails any one of these will fail as an ingredient, however good the idea is. A by-product that passes all of them can become a regular ingredient, sold every day, and can turn a waste cost into an income.
The diagram shows four by-products and the ingredients they become. The steps point to the diagram: each one arises in large amounts, is handled as food, and is processed and tested before it is sold.
Practical note: Pick a by-product from this unit and write a one page ingredient file: what is the by-product, what is it made from, how is it processed, what does it contain, what is it used in, what must it be tested for, and what must its label say? Keep the file with your upcycling plan from Unit 3: together they are a small library of by-products turned into ingredients.
Quick self-check
Question: Why can whey protein be more valuable than the cheese it came from?
Because whey arises in very large amounts, it carries protein that is wanted in drinks and bars, and the powders made from it sell at a high price per kilogram. A dairy that throws whey away throws away money, and a dairy that processes it earns from a material that was once a cost.
Question: Why must fish oil be kept cold and protected from air?
Because fish oil is rich in omega 3 fatty acids, which go rancid quickly when they meet air and heat. Rancid oil tastes bad and loses its value, so the oil must be extracted cleanly, kept cold, and protected from air from the moment it is made.
Try it yourself
Choose a food factory near you, or one you can read about, and list its by-products. For each one, write what ingredient it could become, using the examples in this unit as a guide. Then pick the by-product you think is most promising and write a short pitch for it: what is the ingredient, who would buy it, what would it be used in, and what would you need to test before you could sell it? Bring your pitch to class and compare: which by-products did the class pick, and why?
Key ideas to carry forward
- A by-product is a material made alongside the main product, and it can become an ingredient when handled as food and processed well.
- Whey from cheese becomes protein powders for drinks, bars, and yoghurts.
- Tomato skins and seeds become fibre, colour, and oil.
- Fish heads, bones, and skins become oil, collagen, and mineral powders, with careful testing for contaminants.
- Grain and oilseed by-products become bran, germ oil, and protein flours.
- Fruit and vegetable peels and pulps often carry more nutrients than the flesh, and become fibre, pectin, and colour.
- A by-product succeeds when it is large, steady, clean, processed safely, tested, and sold with a specification and an honest label.
Glossary
By-product
A material made alongside the main product, in the same process. Food tech example: whey is a by-product of cheese making.
Whey protein concentrate
A powder made from whey with a moderate protein level. Food tech example: whey protein concentrate is used in drinks and bars.
Whey protein isolate
A powder made from whey with a high protein level and little lactose. Food tech example: whey protein isolate is used where a high protein and low lactose are wanted.
Lycopene
The red colour in tomatoes, studied for its health properties. Food tech example: lycopene extracted from tomato skins gives a red colour to foods.
Omega 3 fatty acid
A type of fat found in fish oil, wanted for health. Food tech example: fish oil is rich in omega 3 fatty acids.
Collagen
A protein from skins and bones that thickens and stabilises foods. Food tech example: collagen from fish skins is used in drinks and gels.
Seed cake
The solid left after oil is pressed from seeds. Food tech example: sunflower seed cake is milled into a protein flour.
Spent yeast
The yeast left after beer is made, dried into a powder rich in protein and B vitamins. Food tech example: spent yeast powder is used in spreads and soups.
Grape pomace
The pulp left after pressing grapes for juice or wine. Food tech example: grape pomace dried and milled becomes a powder for baked goods.
Wheat germ
The small part of a wheat grain that would grow into a new plant, rich in oil and vitamins. Food tech example: wheat germ oil is pressed from the germ.
Rancid
Spoiled by fats breaking down, with a bad smell and taste. Food tech example: fish oil goes rancid quickly if it is not kept cold and protected from air.
Specification
A written statement of what an ingredient must be: its composition, safety, and shelf life. Food tech example: a whey protein powder is sold with a specification naming its protein and its moisture.
References
- Food and Agriculture Organization, Food Loss and Food Waste, 2019.
- Galanakis, C. M., Food Waste Recovery, 2015.
- Ellen MacArthur Foundation, Cities and Circular Economy for Food, 2019.
- Mirabella, N., Castellani, V. and Sala, S., Current Options for the Valorization of Food Manufacturing Waste, 2014.
- Sagar, N. A., et al., Fruit and Vegetable Waste, 2018.
Unit 5: Compost, Animal Feed, and Energy, the Lower Rungs
Note
Unit 5: Compost, Animal Feed, and Energy, the Lower Rungs
A question to start with
A market has tonnes of vegetable trimmings, stale bread, and fruit that did not sell. The food cannot be eaten by people, because it is spoiled or past its date, and it cannot become an ingredient, because it is mixed and dirty. What should happen to it: feed it to animals, compost it into soil, or turn it into energy? Each choice has a place, and each choice has a limit. How do you choose the right rung of the ladder for food that cannot be eaten? This unit explains the lower rungs of the circular ladder: animal feed, compost, and energy.
The waste ladder, met in Unit 1, ranks the uses of food that cannot be eaten by people. At the top is prevention: do not waste the food at all. Next is feeding people, by giving surplus food to those who need it. Next is feeding animals. Next is making ingredients, covered in Units 3 and 4. Next is composting, then making energy, and last is landfill. This unit covers the three rungs below ingredients: animal feed, compost, and energy. They are called the lower rungs because they are better than landfill, but they give less value than feeding people or making ingredients.
The order matters. A food that can be eaten by people should not be fed to animals, and a food that can become an ingredient should not be composted, because each step down the ladder loses value. But a food that cannot be eaten, and cannot become an ingredient, should go to the highest lower rung it can reach, not to landfill. The skill is to judge where a food sits on the ladder, and to send it to the right rung.
Animal feed: turning waste into meat, milk, and eggs
Feeding food waste to animals is one of the oldest uses of leftovers. Pigs were once fed on kitchen scraps, chickens were fed on grain waste, and cattle were fed on brewers grain and on oilseed cake. The animal turns the waste into meat, milk, or eggs, and the waste becomes food again, in a new form.
Animal feed from food waste must be safe. The waste must not carry anything that harms the animal or that passes into the meat, milk, or eggs. Cooked food waste must be heated to kill microbes, and it must be kept apart from waste that carries chemicals, medicines, or non food materials. Some foods must not be fed to animals at all: meat and fish waste fed to the same kind of animal can spread disease, and in many places the rules forbid feeding animal products to animals of the same kind. A food business that wants to feed its waste to animals must check the current rule in its own country, because the rules are strict and they differ from place to place.
The feed must also be nourishing. A waste that is mostly water, such as wet vegetable trimmings, gives little energy to an animal, and it must be dried or mixed with a drier feed to be worth carrying. A waste that is rich in protein, such as brewers grain or oilseed cake, gives much more, and it is a valuable feed. The feed must be balanced: an animal fed only on one waste will lack nutrients, so the waste is mixed with other feeds to make a complete diet.
Animal feed is a good rung for wastes that are clean, safe, and nourishing, but that cannot be eaten by people or made into ingredients. It is a poor rung for wastes that are mixed, dirty, or carry risks, because the cost of making them safe can be more than the feed is worth. A market that sorts its waste well can feed animals; a market that mixes all its waste together cannot.
Compost: turning waste into soil
Composting is the breaking down of organic material by microbes, with air, into soil. Food waste, garden waste, and paper can all be composted, and the compost that results is rich in nutrients and in organic matter, which improves soil, holds water, and feeds plants. Composting is the rung for food waste that cannot be eaten, fed to animals, or made into ingredients, but that can still return its nutrients to the soil.
Composting needs the right mix: green material, such as food waste and fresh leaves, which is rich in nitrogen, and brown material, such as dry leaves, straw, and paper, which is rich in carbon. The mix must be moist, but not wet, and it must be turned so that air reaches the microbes. The heap heats up as the microbes work, and the heat kills weed seeds and many microbes that cause disease. A well made compost heap reaches a high temperature, smells earthy, and turns into dark, crumbly soil in weeks or months.
Food waste composting can be done at home, in a garden heap or a worm bin, or at scale, in a composting plant that takes food waste from homes, shops, and factories. Home composting suits vegetable peelings, fruit, bread, and garden waste, but it does not suit meat, fish, dairy, or cooked food in large amounts, because those attract pests and smell, and a home heap does not get hot enough to kill the microbes they carry. Industrial composting can take meat and cooked food, because the plant reaches a high temperature and is managed to keep pests out.
Compost must be tested before it is used on soil, because food waste can carry salt, heavy metals, and plastic pieces that do not break down. A compost that carries plastic is not soil, it is litter, and a compost that carries too much salt can harm plants. The plant must sort the waste before composting, removing plastic, metal, and glass, and must test the finished compost for safety.
Questions to think about
- A market has clean vegetable trimmings and mixed waste with plastic in it. Which one can be composted, and which one cannot, and why?
- Why should food that can be eaten by people not be fed to animals, even though animals can eat it?
- A home compost heap does not get hot enough for meat. What should the household do with meat waste instead?
Think about the market question before you read on
The clean vegetable trimmings can be composted, because they are organic, they break down, and they carry no plastic. The mixed waste with plastic cannot be composted as it is, because the plastic does not break down and would end up in the compost as litter. The mixed waste must be sorted first, the plastic removed, and only the clean organic part composted. Sorting is the step that decides whether composting works.
Energy: biogas and the last rung before landfill
Food waste that cannot be eaten, fed to animals, made into ingredients, or composted can still be turned into energy, by anaerobic digestion. Anaerobic digestion is the breaking down of organic material by microbes without air, in a sealed tank, which makes biogas, a gas rich in methane, and a liquid called digestate, which can be used as fertiliser. The biogas is burned to make heat or electricity, and the digestate returns nutrients to the soil.
Anaerobic digestion suits wet food waste, such as kitchen waste, food factory waste, and manure, because the tank needs a wet feed. It does not suit dry waste, such as paper and wood, which break down slowly without air, and it does not suit waste with much plastic, metal, or glass, which must be removed first. The tank must be kept warm and fed steadily, and the gas must be collected safely, because methane can catch fire.
The energy from biogas is useful, but it is the lowest rung that still gives value, because the food's nutrients are largely lost as gas, and only the digestate returns to the soil. A food that is digested for energy gives less value than the same food composted, fed to animals, or eaten by people, so energy is the choice for waste that cannot reach a higher rung, not the first choice for any waste.
Incineration, burning waste to make energy, is a step below anaerobic digestion for food waste, because food waste is wet and burns badly, and burning it loses all its nutrients. Incineration suits dry waste that cannot be recycled or composted, but it is a poor choice for wet food waste, which should go to digestion or composting instead. Landfill is the last choice, below all the others, because it wastes the food, releases methane, and gives nothing back.
Feeding people first: surplus food
Before food reaches animals, compost, or energy, it should be checked for whether people can eat it. Surplus food is food that is good to eat but cannot be sold: bread near its date, fruit that is ripe, meals made in too large amounts, and packs with a dented box but good food inside. This food can be given to people who need it, through food banks, charities, and community kitchens, and giving it is the highest use after prevention. The food must be safe, it must be handled well, and it must be given before its date, not after. The giver must keep records of what was given, when, and to whom, so that the food can be traced if a problem appears. Giving surplus food is not only kind: it is also cheaper than throwing it away, because the giver saves the cost of disposal, and it feeds people with food that would otherwise be wasted. A business that gives its surplus food, and composts only what cannot be eaten, is using the ladder in the right order.
Choosing the right rung
Choosing the right rung for a waste means asking four questions. First, can people eat it? If yes, feed people. Second, can animals eat it safely? If yes, feed animals. Third, can it become an ingredient? If yes, make the ingredient. Fourth, can it be composted? If yes, compost it. If the answer to all four is no, digest it for energy. If even that is not possible, it goes to landfill, but that should be rare, and the business should ask why so much waste reaches the last rung.
The choice also depends on the place. A town with a composting plant can compost its food waste; a town without one cannot, and its waste may go to digestion or to landfill until a plant is built. A farm with animals can feed its waste to them; a factory without animals cannot. The ladder is the same everywhere, but the rungs that can be reached depend on what systems exist where the waste arises. Building those systems, a composting plant, a digestion plant, a feed collection, is part of building a circular food system.
The diagram shows the waste ladder in order. The steps point to the diagram: each rung is better than the one below it, and the skill is to send each waste to the highest rung it can reach.
The value of the lower rungs
The lower rungs are sometimes dismissed as unimportant, because they give less value than feeding people or making ingredients. That dismissal is a mistake. A food system that composts and digests its waste returns nutrients to the soil and makes energy from what would otherwise be landfill, and it does so for the waste that cannot reach a higher rung. The lower rungs are the safety net of the circular system: they catch what the higher rungs cannot use, and they make sure that nothing, or almost nothing, reaches landfill. A circular system needs all its rungs, not only the top ones. The compost that returns to a field feeds the next crop, and the biogas that lights a factory replaces fuel that would have been bought, so the lower rungs give real value, even when they give less than the top rungs.
Practical note: Look at the food waste in your kitchen for one day. Sort it into groups: food that could have been eaten, food that could be fed to animals, food that could be composted at home, and food that could go to no higher rung than energy or landfill. How much falls into each group, and what would you change to move waste up the ladder? Write down the change that would move the most waste up, and try it for a week.
Quick self-check
Question: Why is animal feed above compost on the waste ladder?
Because feed turns waste into meat, milk, or eggs, which are food, while compost turns waste into soil, which is useful but not food. The ladder ranks uses by the value they keep in the food system, and food is worth more than soil.
Question: Why does a home compost heap not suit meat and cooked food?
Because a home heap does not get hot enough to kill the microbes that meat and cooked food carry, and because those foods attract pests and smell. An industrial plant reaches a high temperature and is managed to keep pests out, so it can take meat and cooked food safely.
How biogas is made, step by step
Biogas is made by microbes breaking down food waste without oxygen, in a tank called a digester. The steps are a real process flow, so they are shown as a flow chart.
The diagram shows the biogas flow. The microbes need warmth, time, and no oxygen, and the gas and the fertiliser are both products, not waste.
Try it yourself
Visit a market, a canteen, or a food factory if you can, or read about one, and list the wastes it makes. For each waste, decide which rung of the ladder it should go to, and explain why. Then find one waste that is going to a lower rung than it could reach, and write a short plan to move it up: what would need to change, who would need to act, and what would it cost? Bring your plan to class and compare: which wastes were hardest to move up, and why?
Key ideas to carry forward
- The waste ladder ranks uses from best to last: prevent, feed people, feed animals, make ingredients, compost, energy, landfill.
- Animal feed turns safe, nourishing waste into meat, milk, and eggs, but it must follow strict rules and be balanced.
- Composting turns organic waste into soil, with the right mix of green and brown material, moisture, and air.
- Home composting suits vegetable waste; industrial composting can take meat and cooked food, because it gets hotter.
- Anaerobic digestion turns wet waste into biogas and digestate, and is the last rung that still gives value.
- Landfill is the last choice, because it wastes food and releases methane.
- The right rung is the highest one the waste can reach, and the rungs that can be reached depend on the systems where the waste arises.
Glossary
Waste ladder
A ranking of uses for food waste, from best to last: prevent, feed people, feed animals, make ingredients, compost, energy, landfill. Food tech example: a market sends its surplus to people first, and its spoiled food to compost.
Anaerobic digestion
Breaking down organic material by microbes without air, in a sealed tank, to make biogas and digestate. Food tech example: kitchen waste digested in a tank makes biogas for heat.
Biogas
A gas rich in methane, made by anaerobic digestion, burned for heat or electricity. Food tech example: biogas from food waste powers a factory boiler.
Digestate
The liquid left after anaerobic digestion, used as fertiliser. Food tech example: digestate from a digestion plant is spread on fields.
Compost
Soil made by breaking down organic material with air, rich in nutrients and organic matter. Food tech example: compost from food waste improves garden soil.
Green material
Compost material rich in nitrogen, such as food waste and fresh leaves. Food tech example: vegetable peelings are green material in a compost heap.
Brown material
Compost material rich in carbon, such as dry leaves, straw, and paper. Food tech example: dry leaves are brown material in a compost heap.
Methane
A gas made when organic material breaks down without air, which warms the climate. Food tech example: food rotting in landfill makes methane.
Incineration
Burning waste to make energy, a poor choice for wet food waste. Food tech example: wet food waste burns badly, so it should go to digestion or composting instead.
Landfill
A place where waste is buried in the ground. Food tech example: food thrown into landfill wastes the food and makes methane.
Surplus food
Food that is good to eat but cannot be sold, which can be given to people who need it. Food tech example: bread near its date is surplus food.
Organic matter
Material from living things, such as food and leaves, which breaks down in soil. Food tech example: compost adds organic matter to soil, which holds water.
References
- Food and Agriculture Organization, Food Loss and Food Waste, 2019.
- Ellen MacArthur Foundation, Cities and Circular Economy for Food, 2019.
- Papargyropoulou, E., et al., The Food Waste Hierarchy, 2014.
- Mirabella, N., Castellani, V. and Sala, S., Current Options for the Valorization of Food Manufacturing Waste, 2014.
- Gustavsson, J., et al., Global Food Losses and Food Waste, 2011.
Unit 6: Designing a Circular Food Business
Note
Unit 6: Designing a Circular Food Business
A question to start with
A small bakery throws away dough, unsold bread, and packaging every day. A cafe next door throws away coffee grounds, milk, and food waste. A farm nearby throws away odd shaped vegetables. Each business wastes a little, and each one pays to throw it away. What if the bakery's stale bread became the cafe's bread pudding, the cafe's coffee grounds became the farm's compost, and the farm's odd vegetables became the bakery's soup? What would it take to join the three businesses into a circle, and what would each one gain? This unit explains how to design a circular food business, one that wastes little and uses what it once threw away.
A circular food business is a business that designs waste out of its work, keeps materials in use, and returns what cannot be used to the soil. It is different from a linear business, which takes materials, makes food, and throws the waste away. The circular business still makes and sells food, but it treats its waste as a material with a value, and it designs its products, its buying, and its selling so that waste is small and the waste that remains is used.
The design starts with a simple idea: waste is a cost, and using waste is an income. A business that throws food away pays to buy it, pays to make it, and pays to throw it away, three times over. A business that uses its waste earns from it, or saves the cost of buying the material it replaces. The circular business is not only greener: it is often cheaper, once the waste is measured and the uses are found.
Step one: measure the waste
The first step in designing a circular business is to measure what is wasted, where, and why. The measurement is simple: for one week, or one month, record every waste, by type, by weight, and by reason. Dough thrown away because it was overmixed, bread thrown away because it did not sell, packaging thrown away because it was damaged, and food thrown away because it passed its date are all recorded, with the weight and the cost.
The record shows where the waste is largest, and that is where the work starts. A bakery that wastes most of its dough in mixing should fix its mixing, not its selling. A shop that wastes most of its food at its date should fix its ordering, not its cooking. A factory that wastes most of its trimmings should find a use for the trimmings, not a better bin. Measuring first stops the business from fixing the wrong waste.
The measurement should also count the money: what did the wasted food cost to buy, to make, and to throw away? A waste that costs little is a low priority, however large it is in weight. A waste that costs much is a high priority, however small it is in weight. The business should rank its wastes by cost, and work on the costly ones first.
Step two: prevent the waste
Prevention is the top of the ladder, and it is the cheapest step, because a waste prevented needs no use. Prevention is designed into the business: buy what will sell, make what is ordered, store food well, and sell food before its date.
Buying is the first prevention. A business that buys to a plan, that orders often in small amounts, and that checks what sells before it orders again will waste less than a business that buys in bulk and hopes. A business that buys odd shaped vegetables at a lower price, and uses them in cooking where shape does not matter, prevents the farm waste as well as its own.
Making is the second prevention. A business that makes to order, that plans its runs so that the same food is made in long runs, and that trains its staff to measure and to check, will waste less in making. A business that makes a large batch and hopes it sells will waste the extra.
Selling is the third prevention. A business that puts old food at the front, that reduces the price of food near its date, that sells small portions as well as large ones, and that tells buyers how to store and use the food will waste less at the shop. A business that sells food in a pack that keeps it fresh will waste less than a business that sells it in a pack that lets it spoil.
Step three: find a use for what remains
After prevention, some waste remains, and the business must find a use for it, at the highest rung it can reach. The uses follow the ladder from Unit 5: feed people, feed animals, make ingredients, compost, and make energy, in that order.
Feeding people is the highest use for surplus food that is still good to eat. A bakery can give unsold bread to a food bank, a shop can give surplus food to a charity, and a restaurant can give its extra meals to people who need them. The food must be safe, it must be handled well, and it must be given before its date, not after. Giving food is not only kind: it is also cheaper than throwing it away, because the business saves the cost of disposal.
Making ingredients is the next use for side streams that cannot be eaten as they are. A bakery can turn stale bread into breadcrumbs, a juice bar can turn peel into fibre, and a brewery can turn spent grain into flour. The ingredient must be safe, it must be tested, and it must be sold to a maker who can use it, as in Units 3 and 4.
Composting and energy are the uses for waste that cannot be eaten or made into ingredients. A business that sorts its waste well can compost its vegetable waste and digest its wet waste, and can return the compost to the farm that grew its food. The circle closes when the compost from the business feeds the farm that feeds the business.
Step four: design the product and the pack for the circle
A circular business designs its products and its packs so that waste is small and the waste that remains is easy to use. The product is designed to use the whole food: a soup that uses odd shaped vegetables, a bread that uses spent grain flour, and a sauce that uses tomato skins all use parts that would have been wasted. The product is designed to keep well, so that it is not thrown away, and to be sold in a portion that buyers can finish, so that it is not wasted at home.
The pack is designed to be reusable, recyclable, or compostable, as covered in the Sustainable Food Packaging subject, and to be easy to empty, rinse, and sort. A pack that is hard to empty wastes the food inside it, and a pack that is hard to sort wastes the pack itself. The business should choose a pack that fits the circle it is in: a reusable pack where a return system exists, a recyclable pack where recycling exists, and a compostable pack where composting exists.
The business should also design its buying to fit the circle: buy from suppliers who take back their packs, who sell odd shapes, and who share their waste with the business. A supplier who takes back a pack closes a loop, and a supplier who sells a side stream opens a new one. The circle is built by relationships, not only by products.
Questions to think about
- A bakery wastes most of its dough in mixing. Should it fix its selling first, or its mixing, and why?
- A shop gives its surplus food to a charity. Why is that better than composting it, even though composting is also good?
- A business designs a product that uses odd shaped vegetables. What two kinds of waste does it prevent at once?
Think about the bakery question before you read on
It should fix its mixing first, because that is where the waste is largest. Measuring first shows where the waste is, and the work should start there. Fixing the selling would help the bread that is made, but it would not help the dough that is wasted before it becomes bread. The largest waste, measured by weight and by cost, is the first priority.
Working with others: the circle is bigger than one business
No single business can be fully circular on its own, because its waste is another business's material, and its material is another business's waste. The circle is built by working with others: with suppliers, with neighbours, with charities, and with the town.
A bakery, a cafe, and a farm can share waste: the bakery's stale bread becomes the cafe's pudding, the cafe's coffee grounds become the farm's compost, and the farm's odd vegetables become the bakery's soup. Each business gains, and the town gains, because less waste is thrown away and less money is spent on disposal. The sharing needs trust, clear agreements, and a way to move the materials safely and cheaply. A shared collection, a shared compost heap, or a shared delivery can make the sharing work where a single business acting alone would fail.
A town can help by building the systems the circle needs: a composting plant, a digestion plant, a food bank, and a recycling system. A business can help by sorting its waste well, so that the systems can use it. The circle grows when the systems grow, and the systems grow when businesses use them. The work is shared, and the gain is shared too.
The diagram shows the design of a circular food business. The steps point to the diagram: the circle is a loop, not a line, because measuring again after the changes shows what worked and what still needs fixing.
The money test: does the circle pay?
A circular change should be judged on money as well as on waste. The change costs money to make: a dryer, a new pack, a new collection, or staff time to sort waste. The change saves money too: less food bought, less waste thrown away, and income from a by-product. The business should work out the cost and the saving over a year, not only in the first month, because a change that costs much to start may save much once it is running. A change that pays for itself in a year is a good change, and a change that never pays must be judged on other grounds, such as the law, the buyer's wish, or the planet, and the business must decide whether those grounds are enough. The money test does not decide everything, but a circular business that loses money on every change will not survive, and a business that shows its circular changes pay will be able to make more of them.
Keeping the circle going
A circular business must keep measuring, because waste moves. A new product, a new supplier, or a new buyer can create a new waste, and a waste that was fixed can return. The business should measure its waste every month, or every season, and should set a target: to cut waste by a share, to send nothing to landfill, or to earn a sum from its waste. The target should be written down, and the progress should be shared with staff, so that everyone in the business knows the goal and can help to reach it.
Staff are the key to the circle, because they handle the food, they see the waste, and they know where it comes from. A business that trains its staff, that asks them where the waste is, and that rewards them for cutting it will waste less than a business that tells them only to work faster. The circle is made by people, not only by plans, and the people who make the food are the people who can stop wasting it.
Practical note: Pick a food business you know, a bakery, a cafe, a restaurant, or a shop, and write a one page circular design for it. Measure its waste in general terms, name the largest waste, name one prevention, name one use for what remains, and name one partner it could work with. End with a target: what would you aim to cut in six months, and how would you know if you reached it? Keep the design with your notes for this subject.
Quick self-check
Question: Why should a business measure its waste by cost as well as by weight?
Because a waste that costs little is a low priority, however large it is in weight, and a waste that costs much is a high priority, however small it is in weight. Ranking by cost shows where the money is lost, and that is where the work should start.
Question: Why can no single business be fully circular on its own?
Because its waste is another business's material, and its material is another business's waste. The circle needs suppliers, neighbours, charities, and the town's systems, so the work is shared and the gain is shared too.
Try it yourself
Choose a food business near you and visit it, or read about it online. List its wastes, its products, and its packs. Then design one circular change for it: a product that uses a waste, a pack that can be reused, or a partnership that shares a waste. Write a short pitch for the change: what would it save, what would it cost, who would need to act, and how would you know if it worked? Bring your pitch to class and compare: which changes were cheapest, and which ones saved the most?
Key ideas to carry forward
- A circular food business designs waste out, keeps materials in use, and returns what cannot be used to the soil.
- Waste is a cost, and using waste is an income: a business that throws food away pays three times over.
- Design starts by measuring waste by type, weight, reason, and cost, and working on the largest cost first.
- Prevention is cheapest: buy to plan, make to order, sell before the date.
- What remains goes to the highest rung it can reach: feed people, make ingredients, compost, or make energy.
- Products and packs should be designed for the circle: use the whole food, keep well, and be reusable, recyclable, or compostable.
- No business is circular alone: the circle is built with suppliers, neighbours, charities, and the town.
Glossary
Circular food business
A business that designs waste out of its work, keeps materials in use, and returns what cannot be used to the soil. Food tech example: a bakery that turns stale bread into breadcrumbs is a circular business.
Linear business
A business that takes materials, makes food, and throws the waste away. Food tech example: a factory that buys, makes, and landfills its trimmings is a linear business.
Surplus food
Food that is good to eat but cannot be sold, which can be given to people who need it. Food tech example: bread near its date is surplus food.
Food bank
A place that collects surplus food and gives it to people who need it. Food tech example: a bakery gives unsold bread to a food bank.
Make to order
Making food only when it is ordered, so that no extra is made. Food tech example: a bakery that makes to order wastes less than one that makes to hope.
Side stream
A material left over from making a food, such as peels, husks, or whey. Food tech example: peels from a juice factory are a side stream.
Waste ladder
A ranking of uses for food waste, from best to last: prevent, feed people, feed animals, make ingredients, compost, energy, landfill. Food tech example: a market sends its surplus to people first, and its spoiled food to compost.
Target
A written goal for cutting waste, such as a share to cut or nothing to landfill. Food tech example: a business sets a target to cut waste by a fifth in a year.
Partnership
Two or more businesses working together, such as sharing waste or systems. Food tech example: a bakery and a farm share waste in a partnership.
Good manufacturing practice
The discipline of making food the same way every time, with records and checks. Food tech example: good manufacturing practice cuts waste from mistakes.
Portion
The amount of food served or sold at one time. Food tech example: a small portion lets a buyer finish the food and waste less.
Disposal cost
The money paid to throw waste away. Food tech example: a business that gives food away saves the disposal cost of throwing it away.
References
- Food and Agriculture Organization, Food Loss and Food Waste, 2019.
- Ellen MacArthur Foundation, Cities and Circular Economy for Food, 2019.
- Papargyropoulou, E., et al., The Food Waste Hierarchy, 2014.
- Galanakis, C. M., Food Waste Recovery, 2015.
- Mirabella, N., Castellani, V. and Sala, S., Current Options for the Valorization of Food Manufacturing Waste, 2014.
Unit 7: Measuring Waste and Value
Note
Unit 7: Measuring Waste and Value
A question to start with
A town says it cut its food waste by a fifth in a year. A factory says it now earns money from its waste. A shop says it sends nothing to landfill. Are these claims true, and how would you check them? A claim without a measure is a story, not a fact, and a circular food system without measuring is a hope, not a system. How do we measure food waste, how do we measure the value gained from it, and how do we know if a circular system is working? This unit explains measuring waste and value, the final step of the circular system.
Measuring is the work that makes the circle real. Without measuring, a business cannot know where its waste is, whether it is getting better, or whether its changes worked. With measuring, a business can find its largest waste, set a target, track its progress, and prove its claims to buyers, to partners, and to itself. Measuring is not paperwork for its own sake: it is the tool that turns good intentions into results.
What to measure: waste, value, and impact
Three things are measured in a circular food system: the waste, the value gained from the waste, and the impact of the waste on the environment. Each one needs its own measure, and each one tells a different story.
Waste is measured in weight, in money, and by type. Weight shows how much food is wasted. Money shows what it cost. Type shows what was wasted and where: bread at the shop, dough in the factory, peelings in the kitchen. A business that measures all three can find its largest waste by weight, by money, and by type, and the three may point to different wastes. The largest by weight may be watery peelings that cost little, while the largest by money may be a small amount of meat that cost much. Both matter, and both should be measured.
Value is measured as the money earned from waste, the money saved by not buying a material, and the money saved by not paying for disposal. A bakery that sells breadcrumbs made from stale bread earns money from waste. A farm that uses compost from food waste saves money on fertiliser. A factory that sends less to landfill saves money on disposal. The value is the gain from the circle, and it should be counted in money, so that the business can see whether the circle pays.
Impact is measured as the climate and resource effect of the waste and of its use. The climate impact is counted in gases released, often as carbon dioxide equivalent, known as CO₂e, which adds together the warming effect of different gases into one number. The resource impact is counted in land, water, and energy saved or used. A food that is eaten instead of wasted saves the gases of growing it again, and a food that is composted saves the gases of rotting in landfill. Impact is harder to measure than weight or money, because it needs factors that turn a kilogram of waste into a number of gases, and those factors differ by food and by place, but the direction is clear: less waste means less impact.
How to measure waste: methods that work
Waste can be measured in several ways, and the best way depends on the business and on the waste.
Weighing is the simplest and most direct method. The waste is put on a scale, and the weight is recorded, by type and by step. A kitchen that weighs its waste every day will know its waste in a week, and a factory that weighs its waste at each step will know where the waste is largest. Weighing is cheap, it is accurate, and it is the method most businesses should start with.
Counting is a simpler method for foods that are counted, not weighed: loaves, bottles, or packs. A shop that counts the loaves it throws away each day knows its waste without a scale, and a factory that counts the packs it rejects knows its waste too. Counting is less precise than weighing, but it is easier, and it is enough to start.
Diaries are a method for homes and small businesses: a short record, kept for a week, of what was thrown away, how much, and why. A diary shows the reasons for waste, not only the amount, and the reasons are what the fix needs. A diary that says bread was thrown away because it went stale points to storage; a diary that says bread was thrown away because too much was bought points to buying.
Audits are a method for larger businesses: a careful check, done once or twice a year, where all the waste is sorted, weighed, and recorded, by type and by step. An audit gives a full picture, and it can be compared with the last audit to see whether waste is falling. An audit costs time and money, so it is done rarely, but it is the method that proves a claim to an outsider.
Estimates are used where weighing is not possible, such as on a farm where waste is left in the field. The waste is estimated from the area, the yield, and the share left behind, and the estimate is checked by sampling a small area and weighing what is left there. An estimate is less precise than a weighing, but it is better than no measure, and it should be stated as an estimate, with the method named, so that others can judge it.
Setting targets and tracking progress
A target is a written goal for cutting waste, and it should be specific, measurable, and dated. A target that says waste will be cut is not a target: a target that says waste will be cut by a fifth in a year, from a named starting weight, is a target. The starting weight, called the baseline, is measured first, and the progress is measured against it. Without a baseline, a target cannot be checked, and a claim of progress cannot be proved.
Targets can be set for weight, for money, for landfill, or for value. A business may target to send nothing to landfill in a year, to earn a sum from its waste, or to cut its most costly waste by half. The target should be ambitious enough to matter, and realistic enough to reach, and it should be shared with staff, so that everyone knows the goal and can help to reach it.
Progress is tracked by measuring again, in the same way, at regular times: every week, every month, or every season, depending on the business. The new measure is compared with the baseline, and the difference is the progress. If progress is slower than planned, the business asks why, and changes its plan. If progress is faster, the business asks what worked, and does more of it. Tracking is a loop, not a line: measure, act, measure again, and keep improving.
Reporting waste and value honestly
A business that claims to cut waste, to earn from waste, or to send nothing to landfill should report its numbers honestly, so that buyers, partners, and the public can check them. An honest report names the baseline, the method, the period, and the result, and it names what was left out. A report that says waste was cut by a fifth, without saying from what, by which method, and over what time, cannot be checked, and should not be trusted.
The report should also name the limits of the measure. A business that weighs its factory waste but not its shop waste should say so. A business that estimates its farm waste should say it is an estimate. A business that counts only the waste it throws away, and not the waste its suppliers throw away, should say so. Honesty about limits is not weakness: it is what makes a report trustworthy, and a trustworthy report is worth more than a perfect sounding claim that cannot be checked.
Third party checks, where an outsider checks the numbers, add trust. An auditor who visits the business, checks the scales, reads the records, and confirms the numbers gives the report a weight that a self report cannot carry. A business that wants its claims to be believed should invite a check, and should publish the checker's finding alongside its own numbers.
Questions to think about
- A factory says it cut its waste by a fifth, but it does not say from what weight or over what time. Why can that claim not be checked?
- A bakery weighs its waste every day, while a farm estimates its waste from sampling. Which measure is more precise, and why is the estimate still useful?
- Why should a business report what it left out of its waste measure, as well as what it included?
Think about the factory question before you read on
Because a cut by a fifth means nothing without a starting point and a time. A fifth of a large waste is large, a fifth of a small waste is small, and a fifth cut in a week is different from a fifth cut in a year. Without the baseline, the method, and the period, the claim is a story, not a fact, and no one can check whether it is true.
Measuring value: from waste to income
Value from waste is measured in money, and it has three parts. The first is income: money earned by selling a by-product or an ingredient made from waste. The second is saving: money not spent on buying a material that the waste replaces, such as fertiliser replaced by compost, or feed replaced by a by-product. The third is avoided cost: money not spent on throwing waste away, such as disposal fees saved by sending less to landfill.
The three parts should be counted together, but they should also be named separately, so that the business can see where the value comes from. A business that earns much from selling an ingredient but spends much on making it may gain little in total, and a business that saves much on disposal but earns nothing may gain more. The net value, income plus saving plus avoided cost, minus the cost of making the change, is the true gain, and it is the number that decides whether a circular change pays.
Value should be counted over time, not only in one month. A change that costs much to start, such as building a dryer for spent grain, may lose money in its first year and earn money in its second, once the dryer is paid for. A business that judges a change only on its first month will refuse changes that would pay over a year. The right habit is to count the cost and the gain over the life of the change, and to judge it on that total.
The diagram shows the measuring loop. The steps point to the diagram: the loop repeats, because measuring again after the changes shows what worked and what still needs fixing, and the report proves the claim.
The circular system, measured and proved
This subject began with the scale of waste, walked the food journey, climbed the ladder from ingredients to compost and energy, designed a circular business, and now ends with measuring. The circle is complete when it is measured: when the waste is known, the value is counted, and the impact is tracked, the circular food system is not a hope but a system that can be proved, improved, and trusted.
A food student who can measure waste, set a target, track progress, and report honestly will be useful in any food business, because the student can show what the business wastes, what it gains by wasting less, and whether its claims are true. That skill, more than any single fact about compost or biogas, is the lasting lesson of this subject.
Practical note: Take the waste diary you kept in Unit 1, or start a new one for a week. Weigh or count your waste each day, by type and by reason, and add up the weight and the cost at the end of the week. Then set a target for next week: to cut your waste by a share, and write down one change that will cut it. Measure again next week and compare: did you reach your target, and what did you learn? Keep the two weeks side by side: they are a small example of the measuring loop in this unit.
Quick self-check
Question: What is a baseline, and why is it needed before a target can be checked?
A baseline is the starting measure of waste, taken before changes are made. It is needed because a target is a cut from a starting point, and without the starting point, no one can tell whether the cut happened or how large it was.
Question: What are the three parts of value from waste?
Income from selling a by-product or ingredient, saving from not buying a material the waste replaces, and avoided cost from not paying to throw waste away. The net value is those three together, minus the cost of making the change.
A worked example: the mass balance of a factory
Measuring waste starts with a mass balance: what went in must come out as product, as by-product, or as waste. Work through a simple example for a vegetable packing line, with practice numbers.
Step one: count what went in. The line takes in 1,000 kilograms of carrots in a day.
Step two: count what came out as product. The line packs 700 kilograms of carrots for sale.
Step three: count what came out as by-product. The line sends 200 kilograms of trimmings to a soup maker, which is a by-product, not waste, because it is used as food.
Step four: count the waste. The mass balance says input minus product minus by-product equals waste: 1,000 minus 700 minus 200 gives 100 kilograms of waste a day. The waste rate is 100 divided by 1,000, which is 10 percent of the input.
Step five: count the value. The 100 kilograms of waste cost the factory the price of the carrots, the water to wash them, and the energy to move them, while the 200 kilograms of by-product earns money from the soup maker. A factory that only counts the waste rate misses the value: the goal is not only to cut the 10 percent, but to move more of it from the waste column to the by-product column, and to cut the input that was never needed. The mass balance is the tool that shows all three at once.
Try it yourself
Choose a food business you know and write a short measuring plan for it: what would you measure, how would you measure it, what baseline would you take, what target would you set, and how would you report the result? Then write the three things most likely to go wrong with the measuring, such as staff forgetting to weigh, or waste being mixed, and what you would do about each one. Bring your plan to class and compare: which plans were simplest, and which ones would prove their claims best?
Key ideas to carry forward
- Measuring makes the circle real: without it, a claim about waste is a story, not a fact.
- Waste is measured in weight, in money, and by type, and value is measured as income, saving, and avoided cost.
- Impact is measured in climate gases, often as CO₂e, and in land, water, and energy.
- Waste can be measured by weighing, counting, diaries, audits, and estimates, and each method fits a different place.
- A target must be specific, measurable, and dated, with a baseline measured first.
- Progress is tracked by measuring again in the same way and comparing with the baseline.
- Honest reporting names the baseline, the method, the period, the result, and the limits, and a third party check adds trust.
Glossary
Baseline
The starting measure of waste, taken before changes are made, used to check progress. Food tech example: a bakery weighs its waste for a month to set its baseline.
Target
A written goal for cutting waste, specific, measurable, and dated. Food tech example: a business sets a target to cut waste by a fifth in a year.
CO₂e
Carbon dioxide equivalent, a way of adding together the warming effect of different gases into one number. Food tech example: the climate impact of wasted food is counted as CO₂e.
Audit
A careful check where all waste is sorted, weighed, and recorded, by type and by step. Food tech example: a factory audits its waste twice a year to track progress.
Diary
A short record kept for a week of what was thrown away, how much, and why. Food tech example: a household diary shows that bread is wasted because it went stale.
Net value
The true gain from a circular change: income plus saving plus avoided cost, minus the cost of the change. Food tech example: a dryer for spent grain gains its net value over a year.
Avoided cost
Money not spent, such as disposal fees saved by sending less waste to landfill. Food tech example: a business that composts its waste saves the avoided cost of landfill fees.
Third party check
A check of numbers by an outsider, which adds trust to a report. Food tech example: an auditor checks a factory's waste records and confirms the numbers.
Estimate
A measure worked out from sampling or from known shares, used where weighing is not possible. Food tech example: farm waste left in the field is estimated by sampling a small area.
Tracking
Measuring again at regular times and comparing with the baseline to see progress. Food tech example: a shop tracks its waste every month against its baseline.
Climate impact
The effect of a product on the climate, through the gases it releases. Food tech example: the climate impact of wasted food includes the gases of growing it and of rotting it.
Disposal fee
Money paid to throw waste away, such as a landfill fee. Food tech example: a business that sends less to landfill saves disposal fees.
References
- Food and Agriculture Organization, Food Loss and Food Waste, 2019.
- Ellen MacArthur Foundation, Cities and Circular Economy for Food, 2019.
- Papargyropoulou, E., et al., The Food Waste Hierarchy, 2014.
- Gustavsson, J., et al., Global Food Losses and Food Waste, 2011.
- Parfitt, J., Barthel, M. and Macnaughton, S., Food Waste Within Food Supply Chains, 2010.
Unit 8: Food Waste Prevention, the Top of the Hierarchy
Note
Unit 8: Food Waste Prevention, the Top of the Hierarchy
A question to start with
A bakery throws away a hundred loaves a day. A clever engineer builds a machine that turns the stale loaves into animal feed, and another that turns them into compost, and a third that turns them into biogas. Which machine is the best answer? The surprising answer is none of them: the best answer is to bake a hundred fewer loaves, or to sell the loaves before they go stale. Prevention beats every other answer, because a loaf that is never baked needs no flour, no energy, no water, and no machine to dispose of it. This unit is about that top rung: stopping food waste before it happens.
The waste hierarchy ranks the uses of food from best to last: prevent waste first, then feed people with surplus food, then feed animals, then make ingredients, then compost, then recover energy, and landfill last. Prevention sits at the top because it saves everything that went into the food: the land, the water, the energy, the labour, and the money. Every rung below it saves only part of that, and each step down loses more. A tonne of bread turned into compost saves the soil, but it loses the wheat, the baking, and the bread itself. A tonne of bread never baked saves all of it.
Prevention is also the hardest rung, because it asks people and businesses to change how they plan, buy, cook, and sell. A compost heap is a machine that can be bought. Prevention is a habit that must be learned, and a system that must be designed. This unit explains how prevention works at each step of the chain: on the farm, in the factory, in the shop, and at home.
Prevention on the farm: grow what will be eaten
Farm waste starts before the harvest, when a farmer plants more than the market will buy, or plants a crop that the buyer later rejects for size, shape, or colour. Prevention on the farm starts with the plan: plant what is ordered, in the amount ordered, and agree with the buyer in advance what counts as acceptable. A farmer who knows the buyer will take the crooked carrots as well as the straight ones can sell the whole crop, while a farmer who must meet a strict size rule will leave part of it in the field.
Harvest timing is the second lever. A crop picked at the right time keeps longer and sells better, while a crop picked too early or too late spoils fast or fails the buyer's test. The third lever is the market for the imperfect: a second market for misshapen vegetables, for juicing, for soups, or for processing turns a rejected crop into a sold crop, and the food is no longer waste, even though it never reached the fresh shelf. The farm that sells its whole crop, in two markets instead of one, prevents waste by finding a buyer for every part of it.
Storage on the farm is the fourth lever. A crop that is cooled quickly, kept dry, and protected from pests keeps for weeks, while a crop left warm and damp spoils in days. Cold storage, drying, and good crates are prevention machines: they cost money, but they save more food than they cost, and they are the first investment a farm should make when waste is high.
Questions to think about
- A farmer grows carrots for a buyer who takes only straight, medium sized carrots. What happens to the rest of the crop, and what could prevent that waste?
- Why is agreeing the quality rules before planting better than arguing about them after harvest?
- A farm has no cold store and loses a third of its crop in warm weather. Is a cold store prevention, or is it a lower rung of the hierarchy?
Think about the carrot question before you read on
The crooked, small, and large carrots are left in the field or sold for a low price, even though they are good to eat. Prevention could be a second market for them, such as juicing, soups, or a shop that sells imperfect vegetables, or an agreement with the buyer to take the whole crop at a fair price. The waste is created by the rule, not by the carrot.
Prevention in the factory and the shop: plan, measure, and sell it in time
Factory waste comes from overproduction, from mistakes, and from trimming. Prevention in a factory starts with planning: make what is ordered, in the amount ordered, and make it when it is needed, not weeks ahead. A factory that makes to order wastes less than a factory that makes to fill a warehouse, because the warehouse stock may never be sold. The second lever is the line itself: a line that is set up right, with trained staff and checked settings, makes fewer mistakes, and fewer mistakes mean less food thrown away.
Trimming waste can be prevented by design: a product designed to use the whole ingredient, or to use the trimmings in another product, wastes less than a product that throws the trimmings away. A bakery that turns its trimmings into breadcrumbs, or a vegetable processor that turns its peelings into soup stock, is preventing waste by design, not by disposal.
Shop waste comes from overstocking, from display, and from dates. Prevention in a shop starts with ordering: order what will sell, in the amount that will sell, and order little and often rather than much and rarely. The second lever is the display: a display that is piled high looks generous, but the food at the bottom is crushed and the food at the back goes stale, so a smaller, fresher display sells more and wastes less. The third lever is the price: a food near its date can be sold at a lower price, or cooked into a ready meal, rather than thrown away. The shop that marks down, cooks, or donates in time prevents waste; the shop that waits until the date has passed can only dispose of it.
Prevention at home: the biggest kitchen in the chain
Home is where the most food is wasted in many places, and home prevention is the most personal work in this subject. It starts with planning: a shopping list written from the meals of the week, a check of what is already in the fridge, and a shop that buys what is on the list, not what looks tempting. A household that shops with a list wastes less than one that shops by habit, because the list stops the extra food that will never be eaten.
Storage is the second lever at home. Food kept in the right place, at the right temperature, in a sealed container, keeps for days longer than food left open on a shelf. A fridge that is cold enough, a freezer that is used for food that will not be eaten in time, and a habit of putting the oldest food at the front all prevent waste. The third lever is cooking: cook the amount that will be eaten, use the leftovers the next day, and turn the vegetables that are going soft into a soup or a sauce rather than throwing them away.
The fourth lever is the date. Many people throw food away on its date, even when the food is still good, because they confuse a quality date with a safety date. A date that marks quality, such as best before, means the food may lose flavour after that day, but it is still safe to eat if it looks and smells right. A date that marks safety, such as use by, means the food should not be eaten after that day. Knowing the difference, and trusting the senses for the first kind of date, prevents a large share of home waste.
The diagram shows prevention at each step. Every step that prevents waste leaves less for the next step to deal with.
A worked example: counting the saving from prevention
Prevention must be counted, or it will not be believed. Work through a simple example for a small bakery, with practice numbers. The bakery bakes 200 loaves a day and throws away 40 loaves a day, one in five, because it bakes for a demand that never comes.
Step one: count the waste. Forty loaves a day, at a cost of 1 money unit each to make, is 40 money units a day wasted, or 280 money units a week.
Step two: count the prevention. The bakery changes its plan: it bakes 170 loaves in the morning and 30 more at midday only if the morning loaves sell out. The waste falls from 40 loaves a day to 10 loaves a day, saving 30 loaves a day, or 30 money units a day, which is 210 money units a week.
Step three: count the cost of the change. The midday bake needs a worker to stay an extra hour, costing 20 money units a week, and a smaller display costs nothing. The net saving is 210 minus 20, which is 190 money units a week, and the bakery also saves the flour, energy, and water that went into the 30 loaves a day it no longer bakes.
Step four: count what the lower rungs would have saved. If the 30 loaves a day had gone to compost instead, the bakery would have saved nothing in money, and only the soil would have gained. Prevention saved the money, the ingredients, and the energy, while compost would have saved only the soil. That is why prevention sits at the top: it is the only rung that saves everything.
Practical note: Keep a waste diary for one week in your kitchen. Write down every food thrown away, how much it was, and why it was thrown away: bought too much, cooked too much, stored badly, or past its date. At the end of the week, add up the cost and name the one change that would have saved the most. Then try that change for a week and compare the two diaries.
Quick self-check
Question: Why is prevention better than composting the same food?
Because prevention saves everything that went into the food: the land, water, energy, labour, and money. Composting saves only the soil, and loses the food itself and everything spent making it.
Question: A shop marks down food near its date instead of throwing it away. Is that prevention?
Yes, because the food is still eaten instead of wasted. Marking down in time, cooking in time, and donating in time are all prevention, because they keep the food as food.
Prevention by design: products and packs that waste less
Some waste is designed in, long before the food is bought, and prevention by design removes it at the drawing board. A pack that is too large for the food inside invites the buyer to cook too much. A pack that cannot be closed again lets the food go stale after one opening. A product sold only in a large size forces a small household to buy more than it can eat. Each of these is a design choice, and each can be changed.
The fixes are small and practical. A resealable pack keeps food fresh after opening. A pack with a clear window shows how much is left. Smaller pack sizes let a small household buy what it can eat, and a pack that holds single portions stops the cook from guessing. A label that says how to store the food, and how long it keeps once opened, is prevention printed on the pack. A recipe on the pack that uses the whole food, such as a soup that uses the stems as well as the heads, is prevention in the kitchen.
Design also covers the date. A date printed large and clear, with the words that explain it, helps the buyer trust the food and use it in time. A pack that hides its date in small print, or that uses a code the buyer cannot read, invites waste, because the buyer throws the food away rather than risking it. Prevention by design is cheap, because it is decided once, at the design stage, and it saves food every day the product is sold.
The habit that keeps prevention alive
Prevention fails when it is a project with an end date, because waste returns as soon as the project ends. The habit that keeps it alive is a short, regular check: once a week, the farm, factory, shop, or household looks at what was wasted, names the largest cause, and fixes one thing. The check takes minutes, and it keeps prevention in front of people who would otherwise forget it. A bakery that weighs its waste each evening knows the next morning whether the plan worked. A household that looks in its bin each Sunday knows what to stop buying. Prevention is not a poster on a wall: it is a weekly habit of counting, naming, and fixing, and the habit is what makes the saving last.
Try it yourself
Choose one step of the chain: farm, factory, shop, or home. Write a one page prevention plan for it: the three largest causes of waste at that step, one change for each cause, and the saving each change would make in food and in money. Use the worked example as a model for your numbers, and state clearly which numbers are practice numbers and which are real. Compare your plan with a classmate who chose a different step: which step has the largest saving, and which change is the easiest to start tomorrow?
Key ideas to carry forward
- Prevention sits at the top of the waste hierarchy because it saves everything that went into the food.
- Farm prevention starts with planting what is ordered, agreeing quality rules, and finding a second market.
- Factory prevention starts with making to order, setting the line right, and designing products to use the whole ingredient.
- Shop prevention starts with ordering little and often, displaying less and fresher, and marking down in time.
- Home prevention starts with planning meals, shopping with a list, storing food right, and cooking what will be eaten.
- Knowing the difference between a quality date and a safety date prevents much home waste.
- Prevention must be counted in food and in money, or it will not be believed.
- Every step that prevents waste leaves less for the lower rungs to handle.
Glossary
Prevention
Stopping food waste before it happens, by planning, buying, making, and storing food so that less is wasted. Food tech example: baking to order instead of baking extra is prevention.
Waste hierarchy
A ranking of the uses of food from best to last: prevent, feed people, feed animals, make ingredients, compost, energy, landfill. Food tech example: the waste hierarchy puts prevention above composting.
Surplus food
Food that is still good to eat but is more than the seller can sell before its date. Food tech example: surplus bread near its date can be sold at a lower price or donated.
Make to order
Making food only in the amount ordered, and when it is needed, rather than making stock in advance. Food tech example: a bakery that bakes to order wastes fewer loaves than one that bakes to fill a shelf.
Second market
A different buyer for food that the first buyer will not take, such as juicing or soup making for misshapen vegetables. Food tech example: crooked carrots find a second market in soup making.
Best before
A date that marks quality: the food may lose flavour after that day but is still safe if it looks and smells right. Food tech example: a biscuit past its best before date may be stale but is still safe to eat.
Use by
A date that marks safety: the food should not be eaten after that day. Food tech example: fresh milk past its use by date should not be drunk.
Overproduction
Making more food than will be sold or eaten. Food tech example: a factory that makes to fill a warehouse risks overproduction.
Overstocking
Ordering or displaying more food than will sell before its date. Food tech example: a shop that over-stocks berries will throw many away.
Waste diary
A record kept for a week of every food thrown away, how much, and why. Food tech example: a waste diary shows that most home waste comes from buying too much.
Mark down
Lowering the price of a food near its date so that it sells instead of being thrown away. Food tech example: a shop marks down bread in the evening so it sells before closing.
Quality rules
The agreed standards for size, shape, colour, and condition that a buyer accepts. Food tech example: quality rules agreed before planting decide which carrots the buyer will take.
Cold store
A cooled room or building for keeping harvested crops fresh. Food tech example: a cold store on a farm keeps vegetables fresh for weeks instead of days.
Trimming
The parts of a food cut away during processing, such as peelings or ends. Food tech example: vegetable trimmings can be used for soup stock instead of being thrown away.
References
- Food and Agriculture Organization of the United Nations, Food Wastage Footprint, 2013.
- Potter, N. N. and Hotchkiss, J. H., Food Science, 5th edition, 1995.
- Belitz, H. D., Grosch, W. and Schieberle, P., Food Chemistry, 4th edition, 2009.
- Robertson, G. L., Food Packaging: Principles and Practice, 3rd edition, 2013.
- Nielsen, S. S., Food Analysis, 5th edition, 2017.
Unit 9: Circular Water and Energy Use in Food Production
Note
Unit 9: Circular Water and Energy Use in Food Production
A question to start with
A food factory uses water to wash vegetables, to cool machines, to make steam, and to clean the lines at the end of the day. It uses energy to heat, to cool, to dry, and to move food along the line. At the end of the day, the water runs to the drain and the heat runs out of the roof. What if the water could be used twice, and the heat could be used twice? That is circular water and energy use: the same thinking as circular food, applied to the water and energy that food production drinks and burns. This unit explains how it works, where it pays, and where it must be careful.
Water and energy are the hidden ingredients of every food. A kilogram of food may have taken many litres of water to grow and make, and much energy to heat, cool, and carry. When that water and energy are used once and thrown away, the food carries their full cost. When they are used twice, the food carries half the cost, and the factory saves money as well as resources. The circle for water and energy is the same as the circle for food: use less first, reuse what is clean, recover what is left, and waste as little as possible.
The care is needed because water and energy touch the food. Water reused in a factory must be safe, and heat recovered from one step must not carry contamination into another. The rules for reuse are strict, and the monitoring must be constant. A factory that reuses water badly can harm more people than a factory that wastes water, so the circle must be built on safety first.
Using less water: the first and cheapest step
The cheapest circular water is the water never used. In a food factory, water is used for washing, for cooling, for steam, and for cleaning, and each use can be cut. Washing vegetables with a spray uses less water than washing them in a bath, and washing in a bath that is reused for several batches uses less than a bath that is emptied each time. Cooling with air uses no water at all where it can replace cooling with water, and a closed cooling loop, in which the same water circles again and again, uses a fraction of the water of a once through system.
Cleaning is the largest water use in many factories, and it is the easiest to cut. A cleaning step that starts with a dry clean, scraping and brushing the line before any water is used, can halve the water needed. A cleaning system that measures the water it uses, and that stops when the line is clean rather than running for a fixed time, saves water every day. Low flow nozzles, triggered hoses, and automatic shut offs are small changes that add up to large savings across a year.
The second step is to know where the water goes. A factory that meters its water use at each step can see which step drinks the most, and can fix that step first. A factory that does not meter its water cannot know whether a saving worked, and cannot find a leak until the bill arrives. Metering is the prevention of water waste, just as planning is the prevention of food waste.
Questions to think about
- A factory washes vegetables in a bath that is emptied after each batch. What two changes would cut its water use, and which one would you try first?
- Why is dry cleaning before wet cleaning a water saving, when it uses no water at all?
- A factory finds a leak only when its water bill arrives. What would metering at each step have changed?
Think about the washing question before you read on
First, reuse the bath water for several batches, changing it only when it is dirty enough to matter, and second, switch from a bath to a spray, which uses less water per kilogram. The reuse is the first change to try, because it costs nothing and saves water at once, while the spray needs new equipment.
Reusing water: clean water, used twice
Water reuse means using water again for a new job, and the rule is that the new job must match the quality of the water. The cleanest water, drinking quality water, is used where it touches food. Water that has been used once, such as cooling water that never touched food, can be used again for washing floors, for flushing, or for cooling again. Water that has touched food, such as wash water, can be treated and used again for a job that does not touch food, such as cleaning the yard or watering.
Treatment is the key to reuse. Wash water can be filtered to remove solids, settled to remove soil, and disinfected to kill microbes, and then it can be used again for washing, if the treatment is checked and the water is tested. The treatment must be matched to the risk: water that will touch food again needs the highest treatment and the most testing, while water used for flushing needs far less. A factory that treats all its water to drinking quality wastes money, and a factory that treats none of it risks health.
Rainwater is a form of reuse that many food businesses can use. Rain caught from a clean roof, stored in a tank, and used for washing floors, for cooling, or for watering crops is water that would otherwise run away. It is not drinking water, and it must not touch food unless it is treated, but for the jobs it suits, it is free water, and it takes pressure off the mains supply.
Circular energy: heat that works twice, and power from waste
Energy in a food factory is mostly heat and cold: heat to cook, pasteurise, dry, and sterilise, and cold to chill, freeze, and store. Circular energy means using the heat from one step to do the work of another, and using the cold from one step to cool another. The classic example is heat recovery: the hot water leaving a pasteuriser warms the cold milk entering it, so the heater needs less energy, and the cooler needs less energy too. The heat works twice, once to warm the incoming food and once because it does not need to be removed by cooling.
Drying is another large energy user, and the hot, damp air leaving a dryer carries heat that can warm the incoming air, or warm water for cleaning. Freezing and chilling make heat as a by-product: a cold store that removes heat from food must put that heat somewhere, and that heat can warm water or warm a room. A factory that looks at its heat and cold together, rather than one machine at a time, can find these matches and save a large share of its energy.
The last step of circular energy is making energy from what would be waste. Biogas from food waste, as the earlier unit on the lower rungs explains, can heat a boiler or run a generator. Solar panels on a factory roof can power the lights and the pumps. The energy made on site is the most circular of all, because it never leaves the factory, and it turns a waste into a resource. But it is also the smallest share for most factories: the largest saving comes first from using less, and second from reusing heat, and only then from making new energy.
A worked example: counting the water saved by reuse
Work through a simple example for a vegetable washing line, with practice numbers. The line washes 10,000 kilograms of vegetables a day, using 5 litres of water per kilogram, which is 50,000 litres a day.
Step one: count the saving from reuse. The factory treats the wash water and reuses it for three batches before changing it, cutting the fresh water per kilogram from 5 litres to 2 litres. The fresh water falls from 50,000 litres a day to 20,000 litres a day, saving 30,000 litres a day.
Step two: count the cost of the treatment. The filters, the settling tank, and the testing cost 5 money units a day in materials and labour, while the mains water saved costs 10 money units a day. The net saving is 5 money units a day, before counting the smaller drain bill, because less water goes to the drain.
Step three: count the risk control. The reused water is tested each day for microbes, and the line is flushed with fresh water at the end of the day. If a test fails, the line goes back to fresh water at once, and the batch is held until it is checked. The saving is real, but it depends on the test, and the test is part of the cost.
Step four: count the energy link. The wash water is warm, and the reused water stays warm, so the heater uses less energy to bring it to temperature. The water saving and the energy saving come from the same change, which is how circular systems pay twice: once in water, once in energy.
The diagram shows water circling through a factory. Each reuse is matched to the risk of its new job, and the heat circles with the water.
Safety first: the rules that reuse must follow
Water reuse in food must follow strict rules, and a student must know the shape of them. Water that touches food, or touches a surface that touches food, must be safe, and its safety must be proved by testing, not assumed. The test must be regular, the results must be recorded, and a failed test must stop the reuse at once. The treatment system must have a backup: if a filter fails or a disinfectant runs out, the line must go back to fresh water, not keep running on untreated water.
Heat recovery must also be safe. A heat exchanger that lets a dirty stream touch a clean stream can carry contamination from one to the other, so the design must keep the streams apart, with a barrier that can be checked. A heat recovery system that saves energy but risks the food is a bad system, and no saving is worth it.
The last rule is about honesty in claims. A factory that reuses water should say so, and should be able to show its tests, because a buyer who learns of reuse from a rumour will trust the factory less than a buyer who is told openly. The same is true of energy: a factory that makes power from its own waste should say so, and should show the numbers, because a claim that cannot be shown is not a claim to trust.
Practical note: Walk through your kitchen and list every use of water: washing, cooking, cleaning, and drinking. For each use, write down whether the water could be used twice, and for what job. A pot of water used to boil vegetables can water plants once it cools. Rinse water can wash the floor. Write down one reuse you will try this week, and what you will check to make sure it is safe.
Quick self-check
Question: Why must reused water be matched to its new job?
Because different jobs carry different risks. Water that touches food needs the highest quality and the most testing, while water used for flushing or cooling needs far less. Treating all water to drinking quality wastes money, and treating none of it risks health.
Question: A pasteuriser warms incoming milk with the heat of outgoing milk. What two savings does that give?
It saves the energy to heat the incoming milk, and it saves the energy to cool the outgoing milk, because the outgoing milk leaves cooler. The heat works twice, once as heat and once as avoided cooling.
Energy from the sun and the wind: what a food factory can use
A food factory can make some of its own energy from the sun and, where the site allows, from the wind. Solar panels on a large factory roof can power the lights, the pumps, and the cold store fans during the day, when the sun is strongest and the factory is busiest. Solar heat, from panels that warm water directly, can supply hot water for cleaning, which is a large and steady use in most food factories. Wind power suits a factory with open land and a steady wind, but it needs space, a permit, and a grid connection, so it is less common than solar for a single factory. The honest way to judge on-site energy is the same as for any circular step: count what it makes, count what it costs, and count what it saves, and remember that using less energy first is still the largest saving of all.
Try it yourself
Choose a food factory you know: a dairy, a bakery, a vegetable packer, or a brewery. Write a one page circular water and energy plan for it: the three largest uses of water, the three largest uses of energy, one saving for each, and one reuse for water and one for heat. End with a safety note: what you would test, how often, and what would make you stop the reuse. Compare your plan with a classmate who chose a different factory: which factory has the largest saving, and which reuse carries the highest risk?
Key ideas to carry forward
- Circular water and energy use means using less first, reusing what is clean, recovering what is left, and wasting as little as possible.
- Sprays, dry cleaning, closed cooling loops, and metering are the cheapest water savings.
- Reused water must be matched to its new job, and water that touches food needs the highest treatment and testing.
- Heat recovery lets the heat from one step warm another, saving heating and cooling at once.
- Biogas from food waste and solar power on site turn waste into energy, but the largest saving comes from using less first.
- A failed test must stop reuse at once, and a heat exchanger must keep clean and dirty streams apart.
- Water and energy savings often come from the same change, so the circle pays twice.
Glossary
Closed cooling loop
A cooling system in which the same water circles again and again, instead of being used once and thrown away. Food tech example: a closed cooling loop in a dairy uses a fraction of the water of a once through system.
Dry cleaning
Cleaning a line by scraping and brushing before any water is used. Food tech example: dry cleaning a bakery line before washing halves the water needed.
Heat recovery
Using the heat from one step to do the work of another step. Food tech example: heat recovery warms incoming milk with the heat of outgoing milk in a pasteuriser.
Heat exchanger
A device that lets heat pass from one stream to another without the streams mixing. Food tech example: a heat exchanger warms cold milk with hot milk while keeping the two streams apart.
Rainwater harvesting
Collecting rain from a roof into a tank for use in jobs that do not need drinking water. Food tech example: rainwater harvesting supplies water for washing floors in a food factory.
Biogas
A gas made by microbes breaking down food waste without oxygen, used for heat or power. Food tech example: biogas from food waste heats the boiler in a food factory.
Greywater
Water that has been used once for washing, but not for flushing, which can be treated and used again for a lower risk job. Food tech example: greywater from vegetable washing is treated and used for cleaning floors.
Metering
Measuring water or energy use at each step, so that the largest use can be found and fixed first. Food tech example: metering shows that cleaning is the largest water use in a factory.
Once through system
A cooling system in which water is used once and then thrown away. Food tech example: a once through cooling system uses far more water than a closed loop.
Treatment
Cleaning used water by filtering, settling, and disinfecting it so that it can be used again. Food tech example: wash water is treated by filtering and disinfecting before it is reused.
Disinfection
Killing microbes in water, by heat, by chlorine, or by light, so that the water is safe to use. Food tech example: disinfection of reused wash water kills the microbes picked up from vegetables.
Solar power
Electricity made from sunlight by panels, used on site in a factory. Food tech example: solar panels on a factory roof power the lights and the pumps.
Steam
Water heated to a gas, used in food factories for heating, cooking, and sterilising. Food tech example: steam from a boiler heats the cooking vessels in a cannery.
Potable water
Water safe to drink, used where water touches food. Food tech example: potable water is used to wash vegetables that will be eaten raw.
References
- Potter, N. N. and Hotchkiss, J. H., Food Science, 5th edition, 1995.
- Belitz, H. D., Grosch, W. and Schieberle, P., Food Chemistry, 4th edition, 2009.
- Food and Agriculture Organization of the United Nations, Food Wastage Footprint, 2013.
- Nielsen, S. S., Food Analysis, 5th edition, 2017.
- Robertson, G. L., Food Packaging: Principles and Practice, 3rd edition, 2013.
Unit 10: Policy and Regulation for Circular Food Systems and Industrial Symbiosis
Note
Unit 10: Policy and Regulation for Circular Food Systems and Industrial Symbiosis
A question to start with
Two factories stand side by side. One makes beer and throws away its spent grain. The other makes bread and buys flour, and could bake with that grain. Between them stands a fence, a contract, a food safety rule, and a waste law that calls the grain waste the moment it leaves the first factory. Who moves the grain across the fence, and who writes the rule that lets it move? This unit is about the rules that help or hinder circular food, and about the partnerships that make one factory's waste another factory's input: industrial symbiosis.
Policy is the set of rules a country or a region makes about food, waste, and resources. Regulation is how those rules are enforced: the permits, the inspections, and the penalties. Both shape circular food more than any machine does, because a good machine cannot run where the law forbids it, and a bad law can make the linear path cheaper than the circular one. A food student who understands the rules can design a circular business that the law allows, and can argue for the rules that would allow more.
Industrial symbiosis is the practice of businesses working together so that the waste, water, heat, or by-product of one becomes the input of another. It is the circle drawn larger than one factory, and it is where the largest gains sit, because one factory alone can only reuse so much of its own waste.
The rules that shape circular food
The first set of rules is about waste itself: what counts as waste, and what counts as a by-product. In many places, a material is called waste the moment its maker decides to throw it away, and waste is then governed by waste law, with permits for transport, storage, and use. A by-product, by contrast, is a material made in a process that is not the main product, but that is certain to be used, without further processing, in another process. The line between waste and by-product decides whether a spent grain can move to a bakery with a simple sale, or whether it needs a waste permit, a waste carrier, and a waste record.
The second set of rules is about food safety and feed safety. A by-product that will be eaten by people or animals must be safe, and the rules set the limits for contaminants, the hygiene of handling, and the records that must be kept. A fruit peel that will become an ingredient must be handled as food from the start, not as waste that is cleaned up later. The rule is strict, and it should be: a circular food that harms people is not circular, it is dangerous.
The third set of rules is about the environment: limits on water use, on discharges to rivers, and on emissions to air. These rules can push a factory toward circularity, by making waste costly, or they can block it, by setting a permit that is hard to get. The fourth set is about money: taxes, grants, and charges. A tax on landfill makes composting and reuse cheaper by comparison. A grant for a biogas plant makes energy recovery possible. A charge on plastic makes a reusable pack cheaper by comparison. Policy works through money as much as through law.
Questions to think about
- A brewery's spent grain is called waste the moment it leaves the brewery. Why does that name matter, and what changes if it is called a by-product instead?
- Why must a fruit peel that will become an ingredient be handled as food from the start, not as waste that is cleaned later?
- A landfill tax rises. Which rung of the waste hierarchy becomes cheaper by comparison, and why?
Think about the spent grain question before you read on
Because waste is governed by waste law, with permits for transport, storage, and use, while a by-product can move with a simple sale. The name decides the paperwork, the cost, and the delay, and the same grain can be a cheap ingredient under one name and a costly waste under the other.
How policy helps, and how it hinders
Policy helps circular food in four ways. It sets targets, such as a goal to halve food waste by a stated year, which gives every business a direction and a deadline. It bans the worst option, such as sending food waste to landfill, which forces businesses to find a better rung. It makes the better option cheaper, through a landfill tax, a grant, or a lower charge for a circular pack. And it sets standards, such as a standard for compost or for recycled material, which lets buyers trust what they are buying.
Policy hinders circular food in four ways too. It can define waste so widely that a useful by-product is trapped in waste law. It can set a food safety rule for a linear system that does not fit a circular one, such as a rule that assumes every ingredient comes from a farm, not from another factory. It can set different rules in different places, so that a by-product can move in one region but not in the next, which breaks a chain that crosses a border. And it can change slowly, so that a business built on today's rule finds tomorrow's rule has moved, or a business waiting for a rule waits for years.
The answer for a food business is to know the rules where it works, to design inside them, and to join the groups that argue for better rules. A single business rarely changes a law, but a group of businesses, with evidence of what works and what the barrier costs, can. The evidence matters: a claim that a rule costs money is weak, while a record that shows how many tonnes of food were lost to one rule is strong.
Industrial symbiosis: one factory's waste as another's input
Industrial symbiosis starts with a map: what does each business in an area throw away, and what does each business buy? The map is made by asking, not by guessing, and it often surprises: a brewery throws away grain that a bakery could use, a dairy throws away whey that a food maker could use, a vegetable packer throws away heat that a greenhouse could use, and a fish processor throws away heads and bones that a feed maker could use. The waste of one is the input of another, but only if the two meet, and the meeting is the work of symbiosis.
The match must pass three tests. The first is technical: does the waste fit the new use, in amount, in quality, and in timing? A bakery that needs grain every day cannot use a brewery that makes grain once a week, unless the grain can be stored. The second is safety: is the waste safe for its new use, and can that safety be proved with tests and records? The third is money: does the match save money for both sides, after the cost of transport, storage, and treatment? A match that saves the giver money but costs the receiver money will not last, and a match that needs a grant to survive will fail when the grant ends.
Symbiosis also needs trust and a contract. The giver must supply the waste on time, at the agreed quality, and the receiver must take it on time, or the giver's store will fill up. The contract sets the quality, the amount, the timing, and what happens when the waste fails a test. The best symbiosis networks have a coordinator, a person or a group that keeps the map, finds the matches, and keeps the trust between businesses that might otherwise see each other as rivals.
Building a symbiosis network: a worked example
Work through a small network with three businesses, using practice numbers. A brewery makes 100 tonnes of spent grain a month. A bakery nearby uses 60 tonnes of flour a month and could replace a tenth of its flour with dried spent grain, which is 6 tonnes a month. A farm nearby keeps animals and could take the remaining grain as feed, 94 tonnes a month, if the grain is fresh and safe.
Step one: match the amounts. The bakery takes 6 tonnes, the farm takes 94 tonnes, and nothing is left, so the match is complete on paper. Step two: match the timing. The brewery makes grain in batches through the month, the bakery needs its 6 tonnes once a week, and the farm needs its grain every day, so the grain must be stored and delivered on a plan, not in one load.
Step three: match the quality. The bakery needs the grain dried and milled, which costs money and energy, while the farm needs it fresh and safe, which needs a test for contaminants and a record of the batch. The drying cost falls on the bakery's share, and the testing cost falls on both shares, so the contract must say who pays for what.
Step four: count the money. The brewery saves the cost of disposal, the bakery saves a tenth of its flour cost, and the farm saves part of its feed cost. If each side saves more than it spends on transport, drying, and testing, the network pays, and it will last. If one side loses money, the network must be redrawn: a closer farm, a cheaper dryer, or a larger bakery share. The map is only the start: the money and the timing decide whether the circle closes.
The diagram shows the steps of industrial symbiosis. The map is the start, but the money, the timing, and the contract decide whether the circle closes.
The future: rules that help the circle grow
The rules for circular food are still being written in many places, and the direction is clear: less waste to landfill, more food kept as food, clearer lines between waste and by-product, and more support for reuse and symbiosis. A food student who learns the rules now will be ready to work inside them, and to argue for the next ones.
The most useful argument for better rules is evidence from real networks: tonnes saved, money saved, and jobs kept. A network that can show its numbers can ask for a clearer rule, a faster permit, or a fairer tax, and it will be heard. A network that cannot show its numbers will not be. The work of this subject ends where it began: with measuring, with proving, and with keeping the food, the water, and the energy in the circle for as long as they can usefully stay there.
Practical note: Look up the waste rules in your own area and write down three things: what counts as waste, whether food waste to landfill is banned or taxed, and where a food business reports its waste. Then find one business near you whose waste could be another business's input, and write down the match, the test it would need, and the money it would save. Keep that note with your circular business plan: it is the start of a symbiosis map.
Quick self-check
Question: Why does the line between waste and by-product matter so much?
Because waste is governed by waste law, with permits for transport, storage, and use, while a by-product can move with a simple sale. The same material can be a cheap ingredient under one name and a costly waste under the other.
Question: A symbiosis match saves the giver money but costs the receiver money. Will it last?
No. A match must save money for both sides, after transport, storage, and treatment, or the losing side will stop. The network must be redrawn so that every side gains.
What a student can do: reading the rules where you live
A food student does not need to memorise the waste law of every country, but every student should know how to read the rules where they live. Start with three questions, and find the answers from the public body that governs food and waste in your area. First, what counts as waste, and what counts as a by-product, in your rules? Second, what must a food business do with its food waste: is landfill banned, taxed, or simply allowed? Third, who must be told, and what records must be kept, when a by-product moves from one business to another? Write the answers on one page and keep them with your symbiosis map. Rules change, so date the page, and check it again each year. A student who can read the rules, and who can show the numbers for a real match, is ready to build a circular business inside the law, and to argue for a better law with evidence in hand.
Try it yourself
Choose three businesses in your area: a food maker, a farm, and a shop or restaurant. Draw a symbiosis map for them: what does each one throw away, and what does each one buy? Find one match between them, and write down the amount, the timing, the safety test, and the money for each side. Then write down the rule that would help the match and the rule that would hinder it, and check both rules where you live. Compare your map with a classmate who chose different businesses: which map has the strongest match, and why?
Key ideas to carry forward
- Policy and regulation shape circular food more than any machine, because a good machine cannot run where the law forbids it.
- The line between waste and by-product decides whether a material moves with a simple sale or needs a waste permit.
- A by-product that will be eaten must be handled as food from the start, with safety tests and records.
- Policy helps through targets, bans on the worst option, taxes and grants, and standards buyers can trust.
- Policy hinders when it traps by-products in waste law, when rules differ by place, or when it changes slowly.
- Industrial symbiosis maps what each business throws away and what each buys, and matches the two.
- A match must pass three tests: technical fit, safety, and money for both sides.
- A contract and a coordinator keep a symbiosis network alive, and evidence is the best argument for better rules.
Glossary
Policy
The set of rules a country or region makes about food, waste, and resources. Food tech example: a policy to halve food waste by a stated year gives every food business a direction.
Regulation
How rules are enforced: the permits, inspections, and penalties that make a rule real. Food tech example: a regulation sets the permit a factory needs to send its by-product to another business.
By-product
A material made in a process that is not the main product, but that is certain to be used in another process without further processing. Food tech example: spent grain from brewing is a by-product when it is sold to a bakery.
Waste law
The law that governs materials called waste, including permits for transport, storage, and use. Food tech example: a material called waste must move under waste law, with a waste carrier and a waste record.
Industrial symbiosis
Businesses working together so that the waste, water, heat, or by-product of one becomes the input of another. Food tech example: a brewery's spent grain becomes a bakery's flour in industrial symbiosis.
Landfill tax
A tax charged on waste sent to landfill, which makes reuse, recycling, and composting cheaper by comparison. Food tech example: a landfill tax makes composting food waste cheaper than burying it.
Spent grain
The grain left after brewing beer, rich in fibre and protein, used as animal feed or as an ingredient. Food tech example: spent grain from a brewery is dried and milled for use in bread.
Coordinator
A person or group that keeps a symbiosis map, finds matches between businesses, and keeps trust between them. Food tech example: a symbiosis coordinator matches a dairy's whey with a food maker that can use it.
Permit
An official permission to do something, such as transporting waste or running a plant. Food tech example: a factory needs a permit to send its waste to a biogas plant.
Standard
An agreed level of quality for a product, such as compost or recycled material, that lets buyers trust it. Food tech example: a standard for compost states what it must contain and what it must not contain.
Target
A goal set by policy, such as halving food waste by a stated year. Food tech example: a target to halve food waste gives every business a deadline to work toward.
Disposal
Getting rid of waste, usually by landfill, the lowest rung of the waste hierarchy. Food tech example: disposal of food waste in landfill loses the food and everything spent making it.
Feed safety
The rules that keep animal feed safe, including limits for contaminants and records of origin. Food tech example: spent grain sold as animal feed must meet feed safety rules.
Grant
Money given by a public body to help a business do something, such as building a biogas plant. Food tech example: a grant helps a factory build the plant that turns its waste into energy.
References
- Food and Agriculture Organization of the United Nations, Food Wastage Footprint, 2013.
- Potter, N. N. and Hotchkiss, J. H., Food Science, 5th edition, 1995.
- Belitz, H. D., Grosch, W. and Schieberle, P., Food Chemistry, 4th edition, 2009.
- Robertson, G. L., Food Packaging: Principles and Practice, 3rd edition, 2013.
- Nielsen, S. S., Food Analysis, 5th edition, 2017.