GIFSQ ID: FTN-0031
Alcoholic and Non-Alcoholic Beverages
Unit 1: Types of Alcoholic Beverage
Note
Unit 1: Types of Alcoholic Beverage
A glass of beer, a glass of wine, and a glass of clear spirit look nothing alike, yet all three began the same way: yeast turning sugar into alcohol and carbon dioxide. What decides whether that shared start ends as a cloudy village brew or a clear bottled spirit? The answer runs through this whole unit, and it starts with sorting drinks by how they are made, not by how they look.
1.1 One reaction, many drinks
Every alcoholic drink starts with alcoholic fermentation. Yeast, most often Saccharomyces cerevisiae, turns sugar into ethanol and carbon dioxide, and the reaction can be written in one line:
C₆H₁₂O₆ → 2 C₂H₅OH + 2 CO₂
One molecule of glucose gives two molecules of ethanol and two of carbon dioxide, and the yeast gains 2 molecules of ATP, the cell energy currency, from the deal. The theoretical yield from glucose is 51.1% by mass: 180 g of glucose gives 92 g of ethanol. In practice the yield is lower, about 44.5%, because the yeast uses some sugar to grow and build new cells. That gap between theory and practice is the first lesson of this subject: the biology always takes its share.
🤔 Pause and think: if yeast eats some of the sugar to grow, what happens to the alcohol yield when the yeast is stressed by heat or by too much sugar at the start? Keep that question in mind for Unit 4.
From that single reaction, makers get a whole family of drinks by changing three things: what the sugar comes from, whether the liquid is heated to concentrate the alcohol, and how long the drink is left to rest. Those three choices are the sorting keys for this unit.
Quick check
What does yeast make from glucose in alcoholic fermentation, and what is the theoretical yield?
Check your answer
Ethanol and carbon dioxide: C₆H₁₂O₆ → 2 C₂H₅OH + 2 CO₂. The theoretical yield is 51.1% by mass, and the practical yield is about 44.5% because yeast uses some sugar for growth.
1.2 Sorting by how the drink is made
The most useful way to sort alcoholic drinks is by process, because the process decides the strength, the flavour, and the keeping quality. There are three big groups, plus a fourth that mixes the rules.
- Fermented drinks, not distilled. The liquid is fermented and then served, or lightly clarified, without being heated to separate the alcohol. Beer and wine sit here, and so do cereal brews such as jaanr, a mildly alcoholic, sweet-sour drink made from fermented rice, finger millet, maize, wheat, or barley. The alcohol stays at the level the yeast reached before it stopped, so these drinks are the mildest group.
- Distilled drinks, or spirits. The fermented liquid is heated in a still, the alcohol-rich vapour is condensed, and the result is a much stronger drink. Brandy, rum, vodka, gin, whiskey, and raksi sit here. Raksi, for example, is distilled from a fermented cereal mash and carries about 22-27% alcohol by volume.
- Brewed drinks from starch that needs a helper. Grains and rice hold their sugar locked up as starch, and yeast cannot eat starch. A mould or a mixed starter must first cut the starch into sugars. Sake is the classic example: spores of Aspergillus oryzae grown on rice break the starch down, and Saccharomyces cerevisiae then turns the sugars into alcohol in the same vessel. The two steps run side by side, which is why sake is called a parallel fermentation.
- Fortified and mixed drinks. These start as a fermented drink and gain extra alcohol, or are blended with flavourings. They borrow from both groups, and they are best understood after the two main groups are clear.
How the same fermentation gives wine, beer, sake, and spirits
Yeast ferments it. The result is wine, not distilled.
Malt or a starter ferments it. The result is beer, not distilled.
Mould cuts the starch. The result is sake, brewed, not distilled.
Vapour rises, alcohol condenses first. Wine and beer can both be distilled this way. The result is a spirit, distilled.
Figure 1.1: How the same fermentation gives wine, beer, sake, and spirits. The split is the still: heat it and you get a spirit, skip it and you get a brewed drink. Drawn from the fermentation descriptions in Hui and others, Handbook of Food and Beverage Fermentation Technology (2004), and Tamang, Fermented Foods and Beverages of the World (2010).
Quick check
What is the one process step that separates a spirit from a beer or a wine?
Check your answer
Distillation: heating the fermented liquid so alcohol-rich vapour rises and is condensed. Beer and wine are served without that step.
1.3 Fermented drinks: beer, wine, and cereal brews
Fermented drinks keep everything the yeast made, including the flavours from the raw material. That is why they taste so strongly of their source: wine tastes of grape, beer tastes of malt and hops, and a millet brew tastes of millet.
- Beer is brewed from malted grain, most often barley. The malt gives the sugar, hops give bitterness and aroma, and yeast does the fermenting. Beer is usually the mildest of the three, with alcohol commonly around 4-6% by volume, and it is served with its carbon dioxide still in it, which is the foam and the fizz.
- Wine is fermented fruit juice, most often grape juice. The sugar is already in the juice, so no malting or mould step is needed. Wine is stronger than beer, commonly around 11-14% by volume for a table wine, because grape juice is richer in sugar than beer wort and the yeast can work longer before the alcohol stops it.
- Cereal brews such as jaanr are made by fermenting cooked grain with a mixed starter called marcha, a dry cake of rice, wild herbs, and microbes that carries moulds, yeasts, and lactic acid bacteria together. The moulds cut the starch, the yeasts make the alcohol, and the lactic acid bacteria add the sour note. The drink is mildly alcoholic, slightly acidic, and milky white, and it is often drunk fresh, within days of making.
The shared limit in this group is the yeast itself. As alcohol builds up, it slows the yeast down, and most brewing yeasts stop working well above about 15% alcohol. No fermented drink can climb far past that ceiling without help, which is exactly why distillation was invented.
Quick check
Why can a fermented drink not reach 40% alcohol on its own?
Check your answer
The alcohol itself slows and then stops the yeast, so fermentation stalls well below spirit strength. Distillation is needed to go higher.
1.4 Distilled drinks: spirits
A spirit is a fermented liquid that has been distilled. Heat the liquid gently, and alcohol, which boils at a lower temperature than water, leaves as vapour first. Cool that vapour and it condenses back into a liquid that is much richer in alcohol than the starting brew. Repeat the step, or run it through a tall column, and the strength climbs further.
The raw material still leaves its mark, even after distillation:
- Brandy is distilled from wine, so it keeps a fruity, grape character.
- Rum is distilled from sugar cane products such as molasses, so it carries a sweet, cane note.
- Whiskey is distilled from malted or unmalted grain and is usually aged in wood, which adds colour and flavour.
- Vodka is distilled and then cleaned up so thoroughly that it keeps almost no flavour of its source.
- Gin is a neutral spirit flavoured with juniper and other plant materials.
- Raksi is distilled from a fermented cereal mash such as jaanr, in a simple pot still with a cold-water condenser on top, and it carries about 22-27% alcohol by volume.
A simple pot still in outline
Beer, wine, or jaanr, holding about 5-12% alcohol.
↓
Alcohol vapour rises first, because alcohol boils at a lower temperature than water.
↓
Vapour travels up, meets the cold surface, and turns back to liquid.
↓
Stronger than the mash. Water and heavy parts stay behind in the still.
Figure 1.2: A simple pot still in outline. Heat lifts the alcohol-rich vapour, cold condenses it, and the spirit comes out stronger than the mash. Drawn from the description of traditional distillation in Tamang, Fermented Foods and Beverages of the World (2010).
Quick check
A mash holds 8% alcohol. After one simple distillation, is the collected liquid stronger or weaker than 8%?
Check your answer
Stronger: alcohol leaves as vapour first, so the condensed liquid is richer in alcohol than the mash it came from.
1.5 Sake: the parallel fermentation
Sake is often called rice wine, and the name is a useful starting point as long as it is not taken too literally. It is a brewed drink, not a distilled one, and it is made from rice, not grapes. Its special feature is that two jobs happen at the same time in the same tank.
First, steamed rice is mixed with koji, rice carrying the mould Aspergillus oryzae. The mould makes enzymes that cut rice starch into sugars. Second, yeast (Saccharomyces cerevisiae) ferments those sugars into alcohol as soon as they appear. Because the sugar is eaten as fast as it is made, the yeast never sits in a very sweet liquid, and the fermentation can run long and steady, reaching a strength above most beers, in the range of table wines.
Honesty note: the books used for this unit describe the sake process in general terms: koji saccharification plus yeast fermentation running in parallel. They do not give a standard recipe, a fixed polishing ratio, or a fixed alcohol figure, and those details vary widely between makers. This unit therefore states only what the sources support: the parallel process, the two microbes, and the brewed, non-distilled character of the drink.
🤔 Pause and think: sake, beer, and jaanr all need starch turned into sugar before yeast can work. Beer uses malt enzymes, sake uses mould enzymes, jaanr uses a mixed starter. What does that tell you about how many ways there are to solve the same problem?
Quick check
In sake making, what does Aspergillus oryzae do, and what does the yeast do?
Check your answer
The mould cuts rice starch into fermentable sugars, and the yeast turns those sugars into alcohol and carbon dioxide, both at the same time in the same tank.
1.6 Jaanr and raksi: what the sources do and do not say
Jaanr and raksi are traditional drinks of the Himalayan regions, and they appear in the books as examples of cereal drinks made with amylolytic starters, starters that can digest starch. The books give a clear outline of how they are made and almost no standardised specification, and this unit reports that gap honestly.
What the sources support:
- Jaanr (also spelled jand) is a mildly alcoholic, slightly acidic, milky drink made by fermenting cooked cereal, rice, finger millet, maize, wheat, or barley, with marcha, a dry mixed starter carrying moulds, yeasts, and lactic acid bacteria. The moulds cut the starch, the yeasts make alcohol, and the lactic acid bacteria add acidity and flavour. The pH falls during fermentation as acids build up.
- Raksi is the distilled partner: a fermented cereal mash is heated in a traditional still, and the condensed vapour is collected as a clear spirit of about 22-27% alcohol by volume. A traditional run distils 2-4 kg of jaanr to give 1-2 litres of raksi, and the run takes about 2-3 hours.
What the sources do not give:
- No fixed recipe, no fixed fermentation time or temperature, and no fixed alcohol figure for jaanr: these vary by grain, by starter, and by household or maker.
- No industrial specification for raksi strength or purity: the 22-27% figure is a reported range from traditional practice, not a standard.
- No complete microbial list for every marcha: the starters are mixed, undefined cultures, and their exact make-up changes from place to place.
That thinness is itself a lesson: a drink can be widely made and well loved without ever being written down as a standard, and a food technologist must say so rather than inventing numbers to fill the gap.
Quick check
Name one fact the books support about raksi, and one fact they do not give.
Check your answer
Supported: raksi is distilled from a fermented cereal mash and carries about 22-27% alcohol by volume. Not given: a fixed industrial specification for its strength or purity.
1.7 How strength is measured and talked about
Alcohol strength is usually given as percent alcohol by volume (% v/v): the millilitres of pure alcohol in 100 ml of drink. A beer near 5% holds 5 ml of alcohol in each 100 ml. A second scale, proof, is still used in the trade. In the older proof system, 100 proof is the strength of a spirit holding about 57% alcohol by volume. Drinks weaker than that mark are described as under proof (UP) and drinks stronger than it as over proof (OP). The practical use is simple: a buyer who knows the proof knows the strength without tasting, and a maker who measures proof can check every batch against the same mark.
The other number that matters is the one on the hydrometer. A hydrometer floats in the liquid, and how high it floats depends on the density. As sugar turns into alcohol, the liquid gets lighter, so the hydrometer sinks further. Watching that fall is how a maker follows a fermentation without a laboratory.
Quick check
What does "under proof" (UP) mean?
Check your answer
Weaker than the proof mark: in the older proof system, 100 proof is about 57% alcohol by volume, so an under-proof spirit holds less than that.
1.8 Worked example: from 100 kg of glucose to litres of ethanol
Turn the yield numbers from section 1.1 into a batch a student can check. Start with 100 kg of pure glucose and ferment it fully.
- Theoretical ethanol. At 51.1% by mass, 100 kg of glucose gives 51.1 kg of ethanol.
- Practical ethanol. At about 44.5% by mass, the same 100 kg gives about 44.5 kg of ethanol. The missing 6.6 kg went to yeast growth and other cell work.
- Litres. Ethanol has a density near 0.789 kg per litre, so 44.5 kg is 44.5 ÷ 0.789 = about 56 litres of pure ethanol.
- Finished drink. Diluted to 40% alcohol by volume, those 56 litres make 56 ÷ 0.40 = 140 litres of spirit at drinking strength. Diluted to 12% for a wine, they make about 467 litres.
The same arithmetic runs backwards: if a batch gives far less than 56 litres from 100 kg of glucose, the sugar went somewhere else, and the maker checks temperature, yeast health, and sugar measurement first. If it gives more than the theoretical 51.1 kg, the measurement is wrong, because no fermentation beats its own chemistry.
Quick check
From 100 kg of glucose, how many litres of pure ethanol does the practical yield give, and why is it less than the theoretical yield?
Check your answer
About 56 litres: 44.5 kg at a density near 0.789 kg per litre. It is less than the theoretical 51.1 kg because the yeast uses some sugar to grow and build new cells.
1.9 Practical note: sorting drinks at the bench
The laboratory practical for this subject asks for a process for alcohol and for alcohol-content checks on under-proof and over-proof samples. The bench version of this unit is simple: take three unknown samples, a beer, a wine, and a spirit, and sort them without tasting. Measure the alcohol by volume with a hydrometer or an alcohol meter, note whether the liquid is still or sparkling, and note the smell of the raw material. The fermented drinks will sit in the low range and keep the smell of grain or fruit; the spirit will sit far higher and smell clean or of its flavouring. Record the numbers, not the impressions: the numbers are what a specification is written from.
Quick check
You measure three samples at 5%, 12%, and 40% alcohol by volume. Which is most likely the spirit?
Check your answer
The 40% sample: fermented drinks stall when the yeast stops, well below spirit strength, so only a distilled drink reaches that level.
1.10 Check yourself
Think about it first: a maker ferments grape juice and gets 12% alcohol, then distils half of it and gets a spirit. Which of the two keeps more of the grape flavour, and why?
- Write the equation for alcoholic fermentation and name the yeast most often used.
Check your answer
C₆H₁₂O₆ → 2 C₂H₅OH + 2 CO₂, most often Saccharomyces cerevisiae.
- Why does beer need malt while wine does not?
Check your answer
Beer starts from grain starch, which yeast cannot eat, so malt enzymes must first cut the starch into sugars. Wine starts from grape juice, where the sugar is already free.
- What makes sake different from both beer and wine in its fermentation?
Check your answer
Sake runs saccharification and fermentation in parallel: the mould Aspergillus oryzae cuts rice starch into sugars while the yeast ferments them in the same tank.
- A raksi sample measures 25% alcohol by volume. Is that inside the range the books report for traditional raksi?
Check your answer
Yes: the reported range is about 22-27% alcohol by volume.
- A student ferments 50 kg of glucose and collects 25 litres of pure ethanol. Is that result above or below the practical yield, and by roughly how much?
Check your answer
Below: the practical yield from 50 kg is about 22.25 kg, which is about 28 litres, so 25 litres is about 3 litres short, and the maker checks temperature and yeast health.
Try it yourself: Visit a shop and read the labels of one beer, one wine, and one spirit (no purchase needed). Copy the alcohol by volume from each label, and sort them into fermented or distilled. Then find one drink on the shelf that does not fit neatly into either group, such as a flavoured or fortified drink, and write one sentence explaining why it is a mixed case.
Key ideas to carry forward
- All alcoholic drinks start from one reaction: yeast turns sugar into ethanol and carbon dioxide, gaining 2 ATP, with a theoretical yield of 51.1% and a practical yield near 44.5%.
- Sorting by process is the clearest map: fermented drinks are served as fermented, spirits are distilled, and starch drinks need a helper to free the sugar first.
- Beer is brewed from malted grain, wine from fruit juice, and cereal brews such as jaanr from cooked grain with a mixed starter.
- Distillation lifts alcohol as vapour and condenses it, so a spirit is much stronger than the mash it came from.
- Sake is a parallel fermentation: mould cuts rice starch while yeast ferments the sugars in the same tank.
- Jaanr and raksi are real, documented drinks, but the books give no fixed recipe or industrial specification for them: report the range, and say what is not known.
- Strength is measured as percent alcohol by volume, and proof is a trade scale with under-proof and over-proof marks.
- A worked yield turns the theory into litres: 100 kg of glucose gives about 56 litres of pure ethanol at the practical yield, and a result far below that points to temperature, yeast health, or measurement.
Glossary
Alcoholic fermentation
Yeast turning sugar into ethanol and carbon dioxide without oxygen. Food tech example: the step that makes beer, wine, and jaanr alcoholic.
Distillation
Heating a fermented liquid so alcohol-rich vapour rises, then cooling the vapour back into a stronger liquid. Food tech example: turning a fermented cereal mash into raksi.
Koji
Rice or grain carrying the mould Aspergillus oryzae, used to cut starch into sugars. Food tech example: the starter that makes sake fermentation possible.
Marcha
A dry, ball-shaped mixed starter of rice, herbs, moulds, yeasts, and lactic acid bacteria. Food tech example: the starter mixed into cooked grain to make jaanr.
Jaanr
A mildly alcoholic, slightly acidic, milky drink made by fermenting cooked cereal with marcha. Food tech example: finger millet jaanr, drunk fresh a few days after making.
Raksi
A clear distilled spirit made from a fermented cereal mash, reported at about 22-27% alcohol by volume. Food tech example: raksi distilled from bhaati jaanr in a traditional pot still.
Sake
A brewed rice drink made by parallel fermentation: mould cuts starch while yeast makes alcohol in the same tank. Food tech example: sake served as a brewed drink, never distilled.
Proof
A trade scale for spirit strength. In the older proof system 100 proof is about 57% alcohol by volume. Food tech example: a spirit below that mark is called under proof (UP).
Amylolytic starter
A starter whose microbes make enzymes that cut starch into fermentable sugars. Food tech example: marcha, which lets yeast ferment cooked rice or millet.
Theoretical yield
The most ethanol a fermentation can give from a sugar, 51.1% by mass from glucose. Food tech example: 100 kg of glucose can give at most 51.1 kg of ethanol.
Practical yield
The ethanol a real fermentation gives, about 44.5% by mass from glucose, lower than theory because yeast uses sugar to grow. Food tech example: 100 kg of glucose giving about 44.5 kg, or about 56 litres, of ethanol.
Hydrometer
A floating instrument that reads liquid density, used to follow sugar turning into alcohol. Food tech example: watching the hydrometer sink as a fermentation runs.
References
- Hui, Y. H., Meunier-Goddik, L., Hansen, A. S., Josephsen, J., Nip, W. K., Stanfield, P. S., and Toldra, F. (editors). Handbook of Food and Beverage Fermentation Technology. Marcel Dekker, 2004.
- Tamang, J. P. Fermented Foods and Beverages of the World. CRC Press, 2010.
- Tamang, J. P. Himalayan Fermented Foods: Microbiology, Nutrition, and Ethnic Values. CRC Press, 2010.
- Fermentation Technology and Biochemistry of Ethanol Fermentation. Course lecture decks, used for the fermentation equation, the ATP yield, and the theoretical and practical yields.
Unit 2: Formulation of Different Brands of Liquor
Note
Unit 2: Formulation of Different Brands of Liquor
Two bottles on a shelf can hold the same strength of spirit and taste nothing alike. One is smooth and woody, the other sharp and clean, the third sweet with spice. If the alcohol is the same, where does the difference live? It lives in the formulation: the base spirit, the water, the flavour, the colour, and the rest. This unit opens that recipe box.
2.1 What "formulation" means for a liquor
A liquor brand is not a single liquid. It is a formula: a base spirit plus water, plus flavour, plus colour, plus small additions that set the taste and the shelf life. The formulator's job is to write that formula so that every batch tastes like the last one, and so that the drink is safe, stable, and legal to sell.
Think of it like a cook's recipe with four jobs to do at once. The base spirit sets the strength and the backbone. The water sets the final strength and can add or remove flavour. The flavouring sets the character that the buyer recognises. The small additions, acids, sweeteners, and colours, tune the taste and the look. Change any one of them and the brand changes, which is why a brand guards its formula closely.
🤔 Pause and think: if a brand is a formula, why do two makers starting from the same grain still end up with different drinks? What besides the recipe could differ?
Quick check
Name the four jobs a liquor formula has to do.
Check your answer
Set the strength and backbone (base spirit), set the final strength (water), set the recognisable character (flavouring), and tune taste and look (acids, sweeteners, colours).
2.2 The base spirit: where every brand starts
Every liquor brand starts from a base spirit, and the choice of base decides most of the final character. The main bases are:
- Neutral spirit. A highly purified spirit, distilled to a high strength and cleaned of flavour. It is the blank page: it carries alcohol and almost nothing else, so the flavour added later stands out clearly. Vodka and gin start here, and so do many flavoured liquors.
- Grain spirit. Distilled from grain and kept at a strength where some grain character survives. Whiskey starts here, and the grain flavour is part of the brand.
- Cane spirit. Distilled from sugar cane products such as molasses. Rum starts here, and the cane note survives into the bottle.
- Fruit spirit. Distilled from wine or fermented fruit. Brandy starts here, and the fruit character is the point of the drink.
- Cereal-mash spirit. Distilled from a fermented cereal mash. Raksi is an example: the mash gives the spirit its character, and the simple pot still keeps much of it.
The rule is simple and worth remembering: the cleaner the base, the more the added flavour shows; the more character the base keeps, the less room there is to add flavour without a clash.
From raw material to bottled brand
Grain, cane, fruit, or cereal.
↓
Yeast makes alcohol.
↓
High clean-up gives a neutral spirit. Light clean-up gives a character spirit.
↓
Water, flavour, colour, sweetener.
↓
Figure 2.1: From raw material to bottled brand. The distillation step decides how much character the base keeps, and the formulation step builds the brand on top of it. Drawn from the fermentation and distillation descriptions in Hui and others, Handbook of Food and Beverage Fermentation Technology (2004).
Quick check
Why does vodka start from a neutral spirit while whiskey starts from a grain spirit?
Check your answer
Vodka aims for a clean drink, so its base is purified of flavour. Whiskey aims for grain character, so its base keeps some of it.
2.3 Water: the biggest ingredient by volume
Water is the largest ingredient in a finished liquor by volume, and it is the one most often taken for granted. A spirit that leaves the still near 95% alcohol must be brought down to drinking strength, commonly near 40% alcohol by volume, and that means adding a large volume of water. Bad water can ruin a good spirit: dissolved salts can cloud the drink, iron can darken it, and microbes or off-flavours can spoil it.
The water used for dilution is therefore treated, not taken straight from the tap. The treatment follows the same multiple-barrier idea used for soft drinks: filter out particles, soften or demineralise to remove hardness salts, and disinfect. The standard checks are simple and regular: clarity, taste, odour, hardness, and microbial count. A formulator who skips the water check is formulating blind, because the water is half the bottle.
Worked example: bringing a spirit down to strength. A maker has 100 litres of spirit at 80% alcohol by volume and wants 40%. The alcohol present is 80 litres, and at 40% that alcohol needs a total volume of 80 ÷ 0.40 = 200 litres. So about 100 litres of treated water must be added. In practice the volumes shrink slightly when alcohol and water mix, so the maker adds most of the water, measures, and tops up to the mark.
🤔 Pause and think: the worked example says the volumes shrink a little when alcohol meets water. If you added exactly 100 litres and bottled at once, would the strength read high or low?
Quick check
Why must the water used to dilute a spirit be treated first?
Check your answer
It is the largest ingredient by volume, and dissolved salts can cloud the drink, iron can darken it, and microbes or off-flavours can spoil it.
2.4 Flavouring: how a brand gets its character
Flavouring is where brands separate from each other. The methods fall into a few clear groups:
- Flavouring by the raw material. The grain, fruit, or cane is the flavour. Whiskey and brandy work this way, and the flavour deepens during ageing.
- Flavouring by infusion. Plant materials, juniper berries for gin, herbs, spices, citrus peel, are soaked in spirit so their flavours dissolve into it. The spirit is then filtered and diluted.
- Flavouring by added essence. A prepared flavour, natural or nature-identical, is blended into the neutral spirit in a measured dose. Fruit-flavoured liquors and many cream liquors work this way, and the dose is small: a few millilitres per litre can be enough.
- Flavouring by ageing. The spirit rests in wood, and flavour moves from the wood into the liquid while some harsh notes fade. The wood also adds colour. Ageing is slow, and it is the most expensive way to add flavour, which is why aged brands cost more.
A good formulation writes the flavour dose down as a number, not as a feeling: so many grams of spice per litre, so many millilitres of essence per batch, so many months in wood. That is what lets batch 100 taste like batch 1.
Quick check
Name two ways a liquor can be flavoured, and give a drink for each.
Check your answer
By the raw material, as in whiskey from grain or brandy from fruit; by infusion, as in gin from juniper berries; by added essence, as in a fruit-flavoured liquor; or by ageing in wood.
2.5 Sweetening, colour, and the small additions
After the base, the water, and the flavour, a formula often carries small additions that tune the drink. Each one has a job, and each one can go wrong.
- Sweeteners. Sugar, or a sugar syrup, rounds off harshness and adds body. A sweetened liquor is a different product from a dry one, and the sweetener dose is part of the brand identity. Too much sugar makes the drink syrupy and can cloud it when chilled.
- Acids. A small dose of food acid, most often citric acid, sharpens the taste and balances sweetness. It also helps keep the flavour stable. The dose is small, and it is measured, because too much acid turns the drink sour.
- Colour. Caramel colour is the usual choice for brown spirits, and it is added in a measured dose for a consistent look. A brand that varies in colour from batch to batch looks unreliable, even if it tastes the same.
- Stabilisers and fining agents. These clear haze and keep the drink bright. A common haze in spirits appears when a drink is chilled: flavour oils that dissolve at room temperature come out of solution in the cold. The fix is chill filtration, filtering the spirit cold so the oils are removed before bottling.
The formulation flow for a liquor brand, from spirit to bottle
↓
To reach the target strength.
↓
Infusion, essence, or ageing in wood.
↓
Sweetener, acid, colour, then chill filter.
↓
Figure 2.2: The formulation flow for a liquor brand, from spirit to bottle. Each box is a measured step, not a guess. Drawn from the general formulation practice described in Shachman, The Soft Drinks Companion (2005), applied to spirits.
Quick check
Why is a spirit chill-filtered before bottling?
Check your answer
Flavour oils that dissolve at room temperature can come out of solution when the drink is chilled and turn it hazy. Filtering cold removes them first.
2.6 Blending: the skill that holds a brand together
No two distillation runs are identical. The grain varies, the fermentation varies, and the still varies. A brand therefore depends on blending: mixing spirits from different runs, and sometimes different ages, so the blend matches the brand target. The blender tastes and measures each lot, then works out the mix that lands on the target strength, colour, and flavour.
Blending is also how a maker uses every lot well. A lot that is too strong in one note can be balanced by a lot that is weak in it. A lot that is too pale can be lifted by a darker one. The rule is that the blend is tested before bottling, never after: once the bottle is sealed, the formula is fixed.
Quick check
Why does a brand need blending even when the recipe never changes?
Check your answer
No two distillation runs are identical, so blending mixes different lots to land on the same target strength, colour, and flavour every time.
2.7 Worked formulation: a flavoured liquor, step by step
Put the unit together with a worked example. A maker wants a citrus-flavoured liquor at 30% alcohol by volume.
- Pick the base. Neutral spirit at 95% alcohol, because the citrus must stand out cleanly.
- Set the strength. For each 100 litres of finished drink, 30 litres must be pure alcohol, so 30 ÷ 0.95 = 31.6 litres of the neutral spirit are needed, and the rest is water, flavour, and sweetener.
- Add the water. Treated water is added in stages, with the strength measured after each addition, until the mix reads 30%.
- Add the flavour. A measured citrus essence is blended in, and the batch is tasted against the reference sample kept from the last good batch.
- Tune. A small dose of sugar syrup rounds the taste, a touch of citric acid sharpens it, and the colour is checked.
- Rest and filter. The blend rests so the flavours marry, is chill-filtered, and is tested for strength, clarity, and taste before bottling.
The lesson of the example is the order: strength first, flavour second, tuning last. Flavour added before the strength is set will be diluted unevenly, and tuning added before the flavour is set will be guessed twice.
Quick check
In the worked example, why is the water added in stages with measuring, instead of all at once?
Check your answer
Alcohol and water shrink slightly when mixed, so adding in stages and measuring lets the maker land exactly on the target strength.
2.8 Five brands, five formulas: a side-by-side read
Read the five drinks below as five answers to the same formulation question: base, water, flavour, tuning. The pattern is the lesson: the base decides the backbone, and everything after it is chosen to suit that base, not the other way round.
Whiskey: grain spirit, wood flavour
Base: grain spirit that keeps its character. Water: treated water to drinking strength. Flavour: the grain plus months or years in wood. Tuning: colour from the wood, little or no sweetener. The cost sits in the waiting.
Brandy: fruit spirit, wood flavour
Base: spirit distilled from wine. Water: treated water to drinking strength. Flavour: the grape character plus wood ageing. Tuning: colour from the wood, sweetness low. The fruit is the identity, and the wood rounds it.
Rum: cane spirit, cane flavour
Base: spirit distilled from cane products such as molasses. Water: treated water to drinking strength. Flavour: the cane note, with wood ageing for the aged styles and none for the young ones. Tuning: colour and a touch of sweetness in some styles.
Vodka: neutral spirit, no added flavour
Base: neutral spirit, purified hard. Water: treated water to drinking strength. Flavour: none added, and the test is cleanness. Tuning: chill filtration for brightness, nothing to hide behind.
Gin: neutral spirit, plant flavour
Base: neutral spirit. Water: treated water to drinking strength. Flavour: juniper and other plant materials by infusion or redistillation. Tuning: no wood, no sweetness to speak of, and the botanical dose is the brand.
Now use the comparison as a fault-finding tool. A whiskey that tastes thin has probably lost its wood time or its grain character, not its water. A vodka with a flavour note has a purification fault, not a flavouring fault, because no flavour was meant to be there. A gin with no juniper character has a flavour-dose fault, and the fix is in the botanical charge, not in the base spirit. The formula tells you where to look.
Quick check
A gin tastes flat and has almost no juniper note, while its strength and clarity are correct. Which formulation step is most likely at fault?
Check your answer
The flavour step: the botanical dose or the infusion, because the base spirit and the water are already proven correct by the strength and clarity.
2.9 Practical note: quality tests across liquor brands
The laboratory practical for this subject asks for general quality tests on different liquor brands. At the bench, that means the same small set of checks on every brand, so the brands can be compared fairly: alcohol by volume by hydrometer or alcohol meter, clarity and colour by eye against a white background, smell for off-notes, taste for balance, and a chill test, an hour in a refrigerator, to see whether haze appears. Record each result in the same table for every brand, and the differences between brands become visible as numbers, not opinions.
Quick check
Why run the same tests on every brand instead of testing each one differently?
Check your answer
The same tests give numbers that can be compared fairly, so differences between brands show up as measurements, not opinions.
2.10 Check yourself
Think about it first: a new brand tastes right in the pilot batch but harsh in the first full batch. The recipe is identical. What would you check first: the base spirit, the water, or the flavour dose?
- What is the difference between a neutral spirit and a character spirit as a formulation base?
Check your answer
A neutral spirit is highly purified and carries almost no flavour, so added flavour stands out. A character spirit keeps flavour from its raw material, such as grain or fruit.
- A maker has 50 litres of spirit at 80% alcohol and wants 40%. How much treated water is needed, roughly?
Check your answer
Alcohol present is 40 litres, which at 40% needs 100 litres total, so about 50 litres of water, added in stages with measuring.
- Name three small additions that tune a liquor, and the job of each.
Check your answer
Sweetener rounds harshness and adds body; acid sharpens taste and balances sweetness; colour gives a consistent look.
- Why is blending needed even when the recipe never changes?
Check your answer
No two distillation runs are identical, so blending different lots brings every batch back to the same target.
- A vodka sample carries a clear grain flavour. Which step failed: purification, dilution, or flavouring?
Check your answer
Purification: vodka is built on a neutral spirit with no flavour added, so a grain note means the base was not cleaned enough.
Try it yourself: Pick any two flavoured drinks you can read about or see on a shelf, and write a one-page formulation guess for each: base spirit, water, flavour method, and tuning additions. Then write one sentence for each saying which part of your guess you are least sure about, and what test would settle it.
Key ideas to carry forward
- A liquor brand is a formula: base spirit, treated water, flavour, and small tuning additions, each measured, not guessed.
- The base spirit decides the backbone: neutral for a clean drink, character spirit where the raw material flavour is the point.
- Water is the largest ingredient by volume and must be treated and checked, because it can cloud, darken, or spoil the drink.
- Flavour comes from the raw material, from infusion, from added essence, or from ageing in wood, and the dose is written down.
- Sweetener, acid, and colour tune the drink, and chill filtration keeps it bright when cold.
- Blending mixes different lots so every batch lands on the same target, and the blend is tested before bottling.
- The working order is strength first, flavour second, tuning last.
- The five-brand comparison shows the same logic five ways: the base decides the backbone, and a fault is traced to the step that owns it.
Glossary
Formulation
The written recipe for a brand: base spirit, water, flavour, and tuning additions, each in measured amounts. Food tech example: a citrus liquor formula that states the spirit strength, the essence dose, and the sugar dose.
Neutral spirit
A highly purified spirit with almost no flavour of its own. Food tech example: the base for vodka and for flavoured liquors.
Character spirit
A spirit that keeps flavour from its raw material, such as grain or fruit. Food tech example: a grain spirit that will become whiskey.
Blending
Mixing spirits from different runs or ages to reach one target flavour, colour, and strength. Food tech example: blending lots so batch 100 matches batch 1.
Chill filtration
Filtering a spirit while it is cold to remove flavour oils that would turn hazy when chilled. Food tech example: filtering a spirit at near 0 °C before bottling.
Infusion
Soaking plant material in spirit so its flavour dissolves into the liquid. Food tech example: juniper berries soaked in neutral spirit for gin.
Essence
A prepared flavouring added in a small measured dose. Food tech example: citrus essence blended into a flavoured liquor.
Ageing
Resting a spirit in wood so flavour moves from the wood into the drink and harsh notes fade. Food tech example: whiskey resting in wooden casks.
Under proof (UP)
Weaker than the proof mark, about 57% alcohol by volume in the older proof system. Food tech example: a spirit labelled UP in a laboratory alcohol test.
Over proof (OP)
Stronger than the proof mark. Food tech example: a spirit labelled OP in a laboratory alcohol test.
References
- Hui, Y. H., Meunier-Goddik, L., Hansen, A. S., Josephsen, J., Nip, W. K., Stanfield, P. S., and Toldra, F. (editors). Handbook of Food and Beverage Fermentation Technology. Marcel Dekker, 2004.
- Tamang, J. P. Fermented Foods and Beverages of the World. CRC Press, 2010.
- Shachman, M. The Soft Drinks Companion: A Technical Handbook for the Beverage Industry. CRC Press, 2005.
- Ethanol Production. Course lecture deck, used for distillation column systems and yeast handling.
Unit 3: Types of Spirits
Note
Unit 3: Types of Spirits
Rectified spirit, neutral alcohol, malt spirit, denatured spirit, synthetic alcohol, absolute alcohol. Six names, one family, and a beginner could be forgiven for thinking they are six different chemicals. They are not. They are six different jobs done with the same molecule, ethanol, and the name tells you the job. This unit sorts them out, one by one.
3.1 The one molecule behind six names
Every spirit in this unit is built on ethanol, C₂H₅OH, the alcohol that yeast makes from sugar:
C₆H₁₂O₆ → 2 C₂H₅OH + 2 CO₂
What changes between the six types is not the molecule but the strength, the purity, the source, and the use. A spirit meant for drinking is cleaned and diluted with care. A spirit meant for a laboratory or a factory is cleaned differently, or deliberately made undrinkable. A spirit made without yeast at all is a different production route to the same molecule. Keep that frame in mind and the six names fall into place.
🤔 Pause and think: if all six are ethanol, why does the law treat them so differently? What is being controlled: the molecule, or what people might do with it?
Quick check
What single molecule is at the centre of all six spirit types in this unit?
Check your answer
Ethanol, C₂H₅OH, made by yeast from sugar: C₆H₁₂O₆ → 2 C₂H₅OH + 2 CO₂.
3.2 Rectified spirit: the strong, purified base
Rectified spirit is ethanol that has been distilled and redistilled until it is strong and clean: about 95% alcohol by volume, with the rest mostly water. The name comes from rectification, the repeated distillation and purification that removes flavour compounds and impurities.
Why 95% and not 100%? Because ethanol and water form an azeotrope, a mixture that boils as one at a fixed composition of about 95% ethanol and 5% water. Ordinary distillation cannot push past that point: the vapour and the liquid hold the same composition, so no further separation happens. Rectified spirit is therefore the practical ceiling of ordinary distillation, and it is the standard strong base from which drinking spirits are made by dilution, and from which many industrial uses start.
Rectified spirit is not a finished drink. It is too strong to drink as it is, and it is a starting material: dilute it with treated water, add flavour, and it becomes a liquor; use it as it is, and it serves industry and the laboratory.
Quick check
Why does ordinary distillation stop at about 95% alcohol?
Check your answer
Ethanol and water form an azeotrope at about 95% ethanol and 5% water, a mixture that boils as one, so ordinary distillation cannot separate them further.
3.3 Neutral alcohol: the blank page
Neutral alcohol is a spirit distilled to a high strength and purified so thoroughly that it keeps almost no flavour or smell of its source. It is the blank page of the spirits world: alcohol and water, and as little else as the maker can manage.
Neutral alcohol is the base for vodka, for gin (before the juniper goes in), and for flavoured liquors. It is also called neutral spirit, and the two names describe the same idea: a spirit valued for what it does not carry. The purification is done by careful distillation, often in tall columns with many plates, and sometimes by extra cleaning steps such as filtration through activated carbon, which traps flavour compounds.
How is it different from rectified spirit? The two overlap, and the difference is one of purpose. Rectified spirit is named for its strength and its purification process. Neutral alcohol is named for its flavour, or rather its lack of it. A neutral alcohol is usually a rectified spirit that has been cleaned to the point of flavourlessness. A maker can have a rectified spirit that still carries a faint character, but a neutral alcohol, by definition, does not.
The two-column system: analyser and rectifier
Goes to the analyser column.
↓
Strips alcohol out of the wash.
↓
Purifies the vapour, lifts strength to about 95%.
↓
About 95% alcohol.
Dilute + flavour.
Extra cleaning (carbon filtration). Flavourless base.
See 3.6.
Figure 3.1: The two-column system: analyser and rectifier. The analyser strips alcohol from the wash, the rectifier purifies it to about 95%, and the spirit then goes to drinking use, to extra cleaning, or to absolute alcohol. Drawn from the distillation systems described in the Ethanol Production lecture deck.
Quick check
What is the difference between rectified spirit and neutral alcohol?
Check your answer
Rectified spirit is named for its strength and purification, about 95% alcohol. Neutral alcohol is named for its lack of flavour: a purified spirit cleaned until it carries almost no character of its source.
3.4 Malt spirit: the flavour is the point
Malt spirit is a spirit distilled from a fermented mash of malted grain, most often malted barley. The malt gives the mash its sugar, and it also gives the spirit its flavour: malty, grainy, and full. Unlike neutral alcohol, malt spirit is valued for what it keeps, not for what has been removed.
Malt spirit is the young form of whiskey. Fresh from the still it is a clear, fiery liquid, and it only becomes whiskey after resting in wood, where it gains colour, smoothness, and depth. The distiller's skill sits in the cut: during distillation, the first part of the run (the heads) is sharp and the last part (the tails) is heavy and oily, and the middle part (the heart) is kept as the spirit. A good cut keeps the flavour and leaves the harshness behind.
The contrast with neutral alcohol is the whole lesson of this unit in miniature. One spirit is cleaned until it has no character, the other is kept because of its character. Both are ethanol, and the difference is a choice made at the still.
Quick check
Why is malt spirit kept for its flavour while neutral alcohol is cleaned of flavour?
Check your answer
Malt spirit is the base of whiskey, where the malt and grain flavour is the point of the drink. Neutral alcohol is a blank base for drinks where added flavour must stand out.
3.5 Denatured spirit: made undrinkable on purpose
Denatured spirit is ethanol that has been deliberately made unfit to drink by adding denaturants: substances that make it taste bitter or foul, or that make drinking it unpleasant, while leaving it useful for industry, cleaning, and fuel. The point is separation: the same ethanol that could be a drink becomes a clearly industrial material, taxed and handled differently.
The denaturants are chosen so that they are hard to remove by simple distillation or filtering, and so that they do not spoil the industrial use. Common practice uses bitter agents and other additives that stay with the alcohol through ordinary handling. A denatured spirit is labelled as such, and it must never be used in food or drink production.
Honesty note on an old mistake: an earlier draft of this material named a particular chemical as a denaturant. That claim has been removed, because the sources used for this re-write do not support it as a general statement about denatured spirit, and a textbook must not present an unverified claim as fact. Denatured spirit is described here only as ethanol made undrinkable by added denaturants, and the practical rule is the same either way: it is an industrial material, never a food ingredient.
🤔 Pause and think: denatured spirit is cheaper than drinking spirit partly because it is taxed differently. What would happen if a denaturant could be removed easily at home? Why does that decide which denaturants are chosen?
Quick check
What is denatured spirit, and where must it never be used?
Check your answer
Ethanol deliberately made unfit to drink by added denaturants, for industrial use. It must never be used in food or drink production.
3.6 Synthetic alcohol and absolute alcohol: two different ideas
Two more names complete the set, and they are easy to confuse because both sound like they mean "pure". They do not mean the same thing.
Synthetic alcohol is ethanol made without fermentation, by a chemical route from a non-food raw material. The usual industrial route starts from ethylene, a gas from petroleum refining, and adds water across its double bond with an acid catalyst to give ethanol. The molecule is identical to fermentation ethanol, but its history is different: no yeast, no sugar, no mash. Synthetic alcohol serves industry, solvents, and fuel. It is not used as a food or drink ingredient, because food-grade alcohol must come from a food fermentation route, and the two streams are kept apart.
Absolute alcohol is ethanol with essentially all the water removed: 100%, or as close to it as the maker can reach. It cannot be made by ordinary distillation, because of the 95% azeotrope, so the last water is removed by a special step. One classical route distils the azeotrope with an added liquid that carries the water away, leaving the alcohol behind. Modern plants often use molecular sieves, beds of tiny porous beads that trap water molecules while letting alcohol pass. Absolute alcohol is a laboratory and industrial reagent, used where even a little water would spoil a reaction. It is hygroscopic: leave the bottle open and it pulls water straight out of the air, falling back toward 95%.
Two routes to the edges of the family
Fermented wash, distillation to about 95% (azeotrope), then a special drying step: entrainer distillation or molecular sieves. The result is absolute alcohol, near 100%, pulls water from air.
Ethylene (industrial gas), chemical reaction: water added across the double bond, acid catalyst. The result is synthetic alcohol, same molecule, different history.
Figure 3.2: Two routes to the edges of the family: absolute alcohol is fermentation alcohol dried past the azeotrope, while synthetic alcohol is built chemically from ethylene. Drawn from the azeotrope and absolute alcohol description in the Ethanol Production lecture deck.
Quick check
What is the difference between synthetic alcohol and absolute alcohol?
Check your answer
Synthetic alcohol is ethanol made chemically from ethylene without fermentation. Absolute alcohol is fermentation ethanol dried to near 100% by removing the last water past the 95% azeotrope.
3.7 The six types side by side
| Type | Source | Strength | Flavour | Main use |
|---|---|---|---|---|
| Rectified spirit | Fermented wash, redistilled | About 95% | Clean, faint | Base for drinks and industry |
| Neutral alcohol | Fermented wash, highly purified | High, about 95% | None, by design | Vodka, gin, flavoured liquors |
| Malt spirit | Malted grain mash | Distilled, then diluted | Malty, grainy | Young whiskey |
| Denatured spirit | Ethanol plus denaturants | High | Bitter, foul | Industry, cleaning, fuel |
| Synthetic alcohol | Ethylene, chemical route | High | None | Industry, solvents, fuel |
| Absolute alcohol | Fermented alcohol, specially dried | Near 100% | None | Laboratory, industry |
Read the table down the flavour column and the pattern is clear: the types are arranged by how much character they keep, from the full flavour of malt spirit to the deliberate foulness of denatured spirit. Read it across the source column and the other pattern appears: five types start from fermentation, one does not, and that one never enters food.
Quick check
Which of the six types never enters food or drink, and why?
Check your answer
Denatured spirit and synthetic alcohol: denatured spirit is deliberately made undrinkable, and synthetic alcohol is an industrial chemical, not a food-grade fermentation product.
3.8 Worked example: from rectified spirit to a bottled drink and to absolute alcohol
Take 100 litres of rectified spirit at 95% alcohol by volume. It holds 95 litres of pure ethanol and about 5 litres of water, and those two numbers drive every calculation that follows.
- To absolute alcohol. The 5 litres of water must be removed past the azeotrope, by molecular sieves or by entrainer distillation. The result is about 95 litres of absolute alcohol, near 100%, and it must be kept sealed, because it pulls water from the air and drifts back toward 95%.
- To a vodka at 40%. A 1,000 litre batch at 40% needs 400 litres of pure ethanol. At 95%, that needs 400 ÷ 0.95 = about 421 litres of rectified spirit, and the rest, about 579 litres, is treated water and any small additions, added in stages with measuring, because alcohol and water shrink slightly on mixing.
- To a check at the bench. Dilute a small sample of the same spirit 1:1 with water and watch it: a clean neutral alcohol stays bright, while a sample carrying fusel oils turns cloudy. The cloud is the impurity showing itself, and it is the same test described in section 3.9.
The heads, heart, and tails cut from section 3.4 fits the same arithmetic of choice, not of fixed numbers: the distiller keeps the middle heart as the spirit and sets the sharp heads and heavy tails aside for redistillation. The sources used here give no fixed fraction for each cut, because the cut depends on the still, the spirit, and the distiller, so this unit states the principle and does not invent a percentage.
Quick check
How much rectified spirit at 95% is needed to make 1,000 litres of vodka at 40%, and why is the water added in stages?
Check your answer
About 421 litres: 400 litres of pure ethanol divided by 0.95. The water is added in stages with measuring because alcohol and water shrink slightly when mixed.
3.9 Practical note: general quality tests of rectified spirit and neutral alcohol
The laboratory practical for this subject asks for general quality tests of rectified spirit (RS) and extra neutral alcohol (ENA). At the bench, the shared checks are: appearance (bright, clear, no particles), odour (clean, no foul or foreign note), alcohol strength by hydrometer or alcohol meter, and a simple miscibility test, mixing with water should stay clear, with no clouding or oiliness. A sample that turns cloudy on dilution carries fusel oils or other impurities, and a sample with a sharp foreign smell fails the odour test. Record the strength and the observations side by side for RS and ENA: the ENA should read cleaner on odour and clearer on dilution, and the numbers should show it.
Quick check
A rectified spirit sample turns cloudy when mixed with water. What does that suggest?
Check your answer
It carries impurities such as fusel oils that dissolve in strong alcohol but come out of solution when diluted.
3.10 Check yourself
Think about it first: a laboratory needs ethanol for a reaction that water would spoil, and a factory needs cheap ethanol for cleaning. Which type suits each job, and why are they not interchangeable?
- Why can ordinary distillation not make absolute alcohol?
Check your answer
Ethanol and water form an azeotrope at about 95% ethanol and 5% water that boils as one mixture, so ordinary distillation cannot separate them further.
- What makes malt spirit different from neutral alcohol?
Check your answer
Malt spirit is distilled from malted grain and keeps its malty, grainy flavour, which becomes whiskey. Neutral alcohol is purified until it carries almost no flavour.
- What is denatured spirit, and what is the practical rule for handling it?
Check your answer
Ethanol deliberately made unfit to drink by added denaturants, for industrial use. It must never be used in food or drink production.
- How is synthetic alcohol made, and how does it differ from fermentation alcohol?
Check your answer
It is made chemically from ethylene by adding water across its double bond with an acid catalyst, without yeast or fermentation. The molecule is the same, but its history and its use are industrial, not food.
- A maker has 200 litres of rectified spirit at 95%. How many litres of pure ethanol does it hold, and how much water must be removed to make absolute alcohol?
Check your answer
190 litres of pure ethanol and about 10 litres of water, and the 10 litres of water must be removed past the azeotrope.
Try it yourself: Make a table of the six spirit types from memory, with one column for source, one for flavour, and one for main use. Then check it against section 3.7 and mark every cell you got wrong. The cells you missed are the ones to re-read: they are usually the pair that looks alike, such as rectified spirit and neutral alcohol.
Key ideas to carry forward
- All six spirit types are built on ethanol, C₂H₅OH, and they differ in strength, purity, source, and use.
- Rectified spirit is the strong purified base at about 95%, the ceiling of ordinary distillation because of the ethanol-water azeotrope.
- Neutral alcohol is purified until it is flavourless, the blank base for vodka, gin, and flavoured liquors.
- Malt spirit keeps the flavour of malted grain and becomes whiskey after ageing in wood.
- Denatured spirit is ethanol made undrinkable on purpose for industrial use, and it never enters food.
- Synthetic alcohol is made chemically from ethylene without fermentation, and it is an industrial material.
- Absolute alcohol is dried to near 100% past the azeotrope, and it pulls water from the air if left open.
- A worked example turns 95% into litres: 100 litres of rectified spirit holds 95 litres of pure ethanol, and 421 litres of it make 1,000 litres of vodka at 40%.
Glossary
Rectified spirit
Ethanol distilled and redistilled to about 95% alcohol by volume. Food tech example: the strong base diluted to make a drinking spirit.
Neutral alcohol
A highly purified spirit with almost no flavour or smell of its source. Food tech example: the base for vodka and for flavoured liquors.
Malt spirit
A spirit distilled from a fermented mash of malted grain, keeping a malty flavour. Food tech example: young spirit that becomes whiskey after ageing in wood.
Denatured spirit
Ethanol made unfit to drink by added denaturants, for industrial use only. Food tech example: spirit used for cleaning, never for food.
Synthetic alcohol
Ethanol made by a chemical route from ethylene, without fermentation. Food tech example: industrial ethanol for solvents and fuel.
Absolute alcohol
Ethanol dried to near 100%, past the 95% azeotrope. Food tech example: laboratory ethanol for reactions that water would spoil.
Azeotrope
A mixture that boils as one at a fixed composition, so ordinary distillation cannot separate it. Food tech example: the ethanol-water mixture at about 95% ethanol and 5% water.
Rectification
Repeated distillation and purification to raise strength and remove impurities. Food tech example: the analyser and rectifier columns that lift spirit to about 95%.
Heads, heart, and tails
The first, middle, and last parts of a distillation run. Food tech example: the distiller keeps the heart as the spirit and sets the sharp heads and heavy tails aside.
Entrainer distillation
Distilling the ethanol-water azeotrope with an added liquid that carries the water away, leaving the alcohol behind. Food tech example: one classical route past 95% toward absolute alcohol.
Molecular sieve
A bed of porous beads that traps water molecules while letting alcohol pass. Food tech example: drying spirit past the azeotrope to make absolute alcohol.
References
- Hui, Y. H., Meunier-Goddik, L., Hansen, A. S., Josephsen, J., Nip, W. K., Stanfield, P. S., and Toldra, F. (editors). Handbook of Food and Beverage Fermentation Technology. Marcel Dekker, 2004.
- Tamang, J. P. Fermented Foods and Beverages of the World. CRC Press, 2010.
- Ethanol Production. Course lecture deck, used for distillation to 95%, the azeotrope, column systems, and the analyser and rectifier.
- Biochemistry of Ethanol Fermentation. Course lecture deck, used for the fermentation equation and yields.
Unit 4: Manufacturing of Ethanol
Note
Unit 4: Manufacturing of Ethanol
Molasses is a thick, dark, sticky by-product that sugar factories once struggled to sell. Feed it to yeast under the right conditions and it becomes fuel, solvent, medicine ingredient, and the base of every spirit on the shelf. What are those right conditions, and what happens when they slip? This unit follows the whole factory line, from the first yeast culture to the last drop of distillation.
4.1 The raw materials: what yeast can eat
Ethanol fermentation needs sugar, and the factory takes it from wherever sugar is cheapest and most available. The main raw materials are:
- Molasses. The dark syrup left after sugar is crystallised from cane or beet juice. It is rich in sugars, cheap, and available in large volumes, so it is the workhorse raw material in many plants. It also carries minerals and other nutrients that yeast can use.
- Grains. Maize, wheat, barley, and other cereals hold their sugar as starch, so the starch must first be cooked and cut into sugars by enzymes, from malt or from added enzyme preparations, before the yeast can work.
- Starchy roots and tubers. Cassava, potato, and similar crops are used the same way as grain: cook, convert the starch, then ferment.
- Fruit and fruit wastes. Grape, apple, and other fruit juices carry free sugars, so they can be fermented directly, though they are usually reserved for wine rather than bulk ethanol.
- Cellulosic materials. Straw, bagasse, and wood carry sugar locked in cellulose, and freeing it needs harsh pre-treatment. This route is real but more difficult, and it is not the standard factory route in the books used here.
The choice of raw material decides the preparation steps, but the fermentation itself is the same: yeast, sugar, and controlled conditions.
🤔 Pause and think: molasses is cheap and ready to ferment, grain needs cooking and enzymes first. Why would any factory choose grain over molasses? Think about what else each material gives, and what is available locally.
Quick check
Why is molasses such a common raw material for ethanol, and what must happen to grain before yeast can use it?
Check your answer
Molasses is cheap, rich in sugars, and ready to ferment. Grain starch must first be cooked and cut into sugars by enzymes, because yeast cannot eat starch.
4.2 The yeast and the prefermenter
The yeast is the factory's workforce, and it is prepared in stages so that a small pure culture can grow into enough cells to ferment a huge tank. The key step is the prefermenter culture: yeast grown in log phase, the fast-growing phase, on the same substrate that will be fermented later.
The prefermenter is run with care. The sugar concentration is held near 6%, low enough that the yeast divides rapidly instead of fermenting. Most yeasts start fermenting in earnest when the sugar reaches about 20%, so holding the sugar low keeps the cells in growth mode and builds up cell numbers. The culture is aerated by shaking or stirring, because yeast needs oxygen to multiply well, and it is held near 28 °C. A pure yeast culture is inoculated into a malt-yeast-peptone-glucose broth, incubated for about 2 days in a shaker or 4-5 days in an incubator, and shaken from time to time for aeration.
From the prefermenter, the culture moves through a series of larger seed vessels, each one bigger than the last, until there is enough yeast to start the production fermenter. Skipping these steps, or pitching too little yeast, is one of the commonest causes of a slow or stuck fermentation.
Quick check
Why is the sugar held near 6% in the prefermenter instead of 20%?
Check your answer
At about 6% the yeast divides rapidly and builds cell numbers. Near 20% it starts fermenting instead of growing, so the culture would make alcohol instead of more yeast.
4.3 The fermentation: the chemistry
The chemistry is one line, but the cell does it in 12 enzyme steps:
C₆H₁₂O₆ → 2 C₂H₅OH + 2 CO₂
In the cell, glucose first breaks down into two molecules of pyruvate through the EMP pathway, the Embden-Meyerhof-Parnas route, gaining 2 ATP. Each pyruvate then loses a carbon dioxide to become acetaldehyde, and each acetaldehyde takes hydrogen from NADH to become ethanol, returning NADH to NAD+ so the cycle can continue. The yeast gains 2 ATP per glucose, and ethanol is the end product: a primary metabolite, made while the cell grows.
The numbers matter for the factory. The theoretical yield from glucose is 51.1% by mass: 180 g of glucose gives 92 g of ethanol. The practical yield is about 44.5%, and a well-run fermentation reaches about 92% of the theoretical conversion, because the yeast uses some sugar for its own growth. A factory that measures its yield against those numbers knows at once whether its fermentation is healthy or leaking sugar somewhere.
Quick check
How much ATP does yeast gain per glucose in ethanol fermentation, and what is the theoretical yield?
Check your answer
2 ATP per glucose. The theoretical yield is 51.1% by mass: 180 g of glucose gives 92 g of ethanol.
4.4 Batch process: one tank, one run
In the batch process, the fermenter is filled, inoculated, left to ferment, and emptied. The whole cycle runs in one vessel, and each batch is a fresh start.
The standard batch conditions from the lecture decks are:
- Substrate: 18-22% total reducing sugars (TRS) by weight.
- Inoculum: the yeast suspension is 25-30% of the total fermentation volume.
- pH: about 5.
- Temperature: 28-35 °C, held steady by internal cooling coils.
- Time: production starts within about 12 hours, and the fermentation is usually complete within 40-48 hours, depending on the sugar content.
- Final alcohol: about 7.5-8% in the fermented liquid.
Temperature control is the make-or-break control. High temperature is undesirable for five clear reasons: excessive foaming, growth of unwanted microbes, loss of alcohol by evaporation, falling yeast viability, and premature flocculation, the yeast clumping and dropping out early, which leaves a stuck fermentation. High temperature also favours the formation of higher alcohols, unwanted by-products that spoil flavour. The cooling coils are therefore not a luxury: they are what keeps the batch on track.
After fermentation, the cells are separated from the liquid. The yeast biomass can be used as single-cell protein for animal feed, and the liquid goes to distillation.
The batch ethanol process, from prefermenter to distillation
Yeast in log phase, 6% sugar.
↓
18-22% sugars, pH about 5, 28-35 °C with cooling coils, 40-48 hours.
↓
About 7.5-8% alcohol. Yeast cells go to feed use, liquid goes to distillation.
Figure 4.1: The batch ethanol process, from prefermenter to distillation. The numbers are the standard conditions from the Ethanol Production lecture deck. Drawn from that deck.
Quick check
Name three problems caused by letting a batch fermentation run too hot.
Check your answer
Excessive foaming, loss of alcohol, falling yeast viability, premature flocculation and a stuck fermentation, and more higher alcohols. Any three of these count.
4.5 Continuous process: never empty the tank
In the continuous process, the fermenter is never emptied. Fresh substrate flows in at the same rate as fermented liquid flows out, and the yeast stays in the vessel, working steadily. Large fermenters are used, with tanks of 300 to 3,000 cubic metres, and the same conditions apply: pH near 5, temperature 28-35 °C, and careful control.
The continuous process has clear strengths: the plant runs without the downtime of filling, emptying, and cleaning between batches, the yeast stays in its productive phase, and the output is steady. It also has clear risks: a contamination that enters the vessel stays in the system and can spoil a long run, and the controls must be tighter, because there is no fresh start to hide a mistake. The batch process is easier to control and easier to clean; the continuous process is more efficient when it runs well.
Some plants run a middle path: a half-broth recycle, where half the fermented liquid is drawn off and the other half stays as the inoculum for the next cycle. Others recycle the yeast itself: the yeast cream, 60-70% cells by weight, is diluted with water, treated with sulphuric acid at pH 1.8-2.5 for about 2 hours to cut bacterial contamination, and used again as the starter. Yeast that is not recycled means each batch starts from a fresh culture.
🤔 Pause and think: a continuous plant saves downtime but cannot be cleaned without stopping. A batch plant stops often but starts clean every time. Which would you choose for a drink, and which for a fuel, and why?
Quick check
What is the main strength and the main risk of a continuous ethanol fermentation?
Check your answer
Strength: steady output with no downtime for filling, emptying, and cleaning. Risk: contamination stays in the system and can spoil a long run.
4.6 Distillation and rectification: getting the alcohol out
The fermented liquid holds only about 7.5-8% alcohol, and distillation lifts it out. The systems used for producing strong alcohol include one-column, two-column, three-column, vapour recompression, vacuum rectification, multiple-effect, and six-column systems. For beverage use, one- to three-column systems are the usual choice.
The two-column system is the clearest example. It has two parts:
- Analyser. The fermented liquid enters, and the column strips the alcohol out of it. The spent liquid leaves from the bottom.
- Rectifier. The alcohol vapour is purified and lifted to a higher concentration, about 95% alcohol by volume.
Ethanol can be recovered up to about 95% by successive distillations. Beyond that sits the azeotrope, about 95% ethanol and 5% water, which ordinary distillation cannot pass. Absolute alcohol needs a further step, described in Unit 3.
The recovered spirit is tested by gas chromatography, the standard analytical method for volatile compounds. A sample is vaporised, carried through a column where each component separates by its physical and chemical properties, and measured by a detector at the end. It is the routine way to check ethanol purity and to find trace impurities.
Quick check
In a two-column system, what does the analyser do and what does the rectifier do?
Check your answer
The analyser strips alcohol out of the fermented liquid. The rectifier purifies the vapour and lifts it to about 95% alcohol.
4.7 Uses of ethanol
Ethanol is one of the most widely used chemicals in the world, and its uses fall into four groups:
- Alcoholic beverages. The base of every spirit, and the alcohol in beer and wine.
- Fuel. A biofuel for internal combustion engines, used pure or blended with petrol.
- Solvent. For resins, pharmaceuticals, cosmetics, and household cleaning products.
- Chemical intermediate. A starting material for other chemicals, including butadiene production and petroleum-derived chemicals.
The same molecule serves all four, and the difference is the grade and the handling: food-grade ethanol comes from food fermentation and is handled as a food ingredient, while industrial and fuel ethanol follows industrial routes and controls.
The whole ethanol line, from raw material to the four uses
Molasses, grain, or roots.
↓
Cook and convert starch, or dilute molasses.
↓
Yeast, 28-35 °C, pH 5, 40-48 hours.
↓
Analyser plus rectifier, to about 95%.
Drinks, fuel, solvent, chemical intermediate.
Figure 4.2: The whole ethanol line, from raw material to the four uses. Drawn from the Ethanol Production lecture deck.
Quick check
Name the four main use groups for ethanol.
Check your answer
Alcoholic beverages, fuel, solvent, and chemical intermediate.
4.8 Worked example: how much ethanol from 1,000 kg of molasses
Take a molasses feed of 1,000 kg holding 50% fermentable sugar by mass, a round illustrative figure for this worked example, not a standard for all molasses. That is 500 kg of sugar for the yeast.
- Theoretical ethanol. At 51.1% by mass, 500 kg of sugar gives 500 x 0.511 = 255.5 kg of ethanol.
- Practical ethanol. At about 44.5% by mass, the same sugar gives 500 x 0.445 = 222.5 kg of ethanol.
- Litres. At a density near 0.789 kg per litre, 222.5 kg is 222.5 ÷ 0.789 = about 282 litres of pure ethanol.
- Fermented liquid. If the fermenter reaches 8% alcohol by volume, those 282 litres sit in 282 ÷ 0.08 = about 3,525 litres of fermented liquid, and the rest is water, yeast, and unfermented solids.
- Rectified spirit. Distilled to 95%, the 282 litres of pure ethanol give 282 ÷ 0.95 = about 297 litres of rectified spirit.
Now use the numbers as a diagnostic. A plant that gets 200 litres from the same feed is running well below the practical yield, and the first checks are temperature, sugar measurement, and yeast pitching rate. A plant that reports 330 litres has a measurement error, because it is above the theoretical ceiling of about 324 litres. The yield table is a lie detector as well as a target.
Batch or continuous: which fits the job?
Batch
One tank, one run, fresh start every time. Easier to control and clean, and a fault is contained in one batch. Downtime between runs.
Continuous
Fresh feed in, fermented liquid out, yeast stays working. Steady output and no downtime, but contamination stays in the system and controls must be tighter.
Middle path
Half-broth recycle or yeast recycle, where part of the liquid or the yeast cream is kept as the starter for the next cycle.
Quick check
From 1,000 kg of molasses at 50% fermentable sugar, how many litres of pure ethanol does the practical yield give?
Check your answer
About 282 litres: 500 kg of sugar at 44.5% gives 222.5 kg of ethanol, and 222.5 divided by 0.789 kg per litre is about 282 litres.
4.9 Practical note: a process for alcohol
The laboratory practical for this subject asks for a process for alcohol. At the bench, the small-scale version follows the factory in miniature: prepare a sugar solution, inoculate with yeast, hold it near 30 °C, watch the bubbling of carbon dioxide, and measure the alcohol after 2 days. The bench checks are the same as the factory's: temperature, pH, sugar fall, and final alcohol. The bench also teaches the factory's lesson directly: a flask left too warm ferments fast, foams, and stalls, while a flask held steady finishes cleanly.
Quick check
What four measurements follow a bench alcohol fermentation?
Check your answer
Temperature, pH, sugar fall, and final alcohol.
4.10 Check yourself
Think about it first: a batch reads 5% alcohol after 48 hours instead of the expected 7.5-8%. The temperature log shows the tank ran hot on day one. Which of the hot-temperature problems most likely explains the low result, and what would you check next?
- Write the fermentation equation and the practical yield from glucose.
Check your answer
C₆H₁₂O₆ → 2 C₂H₅OH + 2 CO₂. The theoretical yield is 51.1% and the practical yield is about 44.5%.
- Why is the prefermenter held at about 6% sugar?
Check your answer
So the yeast divides rapidly and builds cell numbers instead of fermenting the sugar into alcohol.
- Give the standard batch conditions: sugar, pH, temperature, time, and final alcohol.
Check your answer
18-22% total reducing sugars, pH about 5, 28-35 °C, 40-48 hours, final alcohol about 7.5-8%.
- What is the difference between a batch and a continuous ethanol process?
Check your answer
Batch fills, ferments, and empties one tank per run. Continuous feeds fresh substrate in and draws fermented liquid out without emptying, so it runs steadily but is harder to clean and more exposed to contamination.
- A plant reports 330 litres of pure ethanol from 500 kg of sugar. Is that result possible, and what does it tell you?
Check your answer
No: the theoretical ceiling is 255.5 kg, about 324 litres, so 330 litres must be a measurement error in the sugar, the ethanol, or both.
Try it yourself: Make a sugar solution of about 18% sugar in a clean bottle, add a small amount of baker's yeast, fit a loose cap or a balloon over the neck, and keep it near 30 °C for 2 days. Record the temperature, the bubbling, and the smell each morning. What changes first: the bubbling, or the smell? Write one sentence explaining why.
Key ideas to carry forward
- Ethanol comes from sugar: molasses ferments directly, while grain and roots need cooking and starch conversion first.
- The prefermenter builds yeast numbers at about 6% sugar and 28 °C, so the yeast grows instead of fermenting.
- Fermentation follows C₆H₁₂O₆ → 2 C₂H₅OH + 2 CO₂, gaining 2 ATP, with a theoretical yield of 51.1% and a practical yield near 44.5%.
- Batch fermentation runs at 18-22% sugars, pH about 5, 28-35 °C, for 40-48 hours, reaching about 7.5-8% alcohol.
- High temperature causes foaming, alcohol loss, falling yeast viability, premature flocculation, and more higher alcohols.
- Continuous fermentation runs steadily without emptying, and is efficient but exposed to contamination.
- Distillation lifts the alcohol to about 95% through analyser and rectifier columns, and gas chromatography checks the purity.
- Ethanol serves four uses: beverages, fuel, solvent, and chemical intermediate.
- A worked yield turns molasses into litres: 1,000 kg at 50% sugar gives about 282 litres of pure ethanol at the practical yield, and a result above the theoretical ceiling means a measurement error.
Glossary
Prefermenter
A small vessel where yeast is grown in log phase on the fermentation substrate before the main run. Food tech example: yeast grown at 6% sugar so it multiplies instead of fermenting.
Log phase
The fast-growing phase of a microbe culture, when cells divide at their fastest rate. Food tech example: prefermenter yeast in log phase, ready to pitch.
Total reducing sugars (TRS)
The sugars in a liquid that can be measured as reducing sugars, used to set the fermentation strength. Food tech example: a molasses feed set to 18-22% TRS.
EMP pathway
The Embden-Meyerhof-Parnas route, the enzyme steps that break glucose into pyruvate. Food tech example: the pathway that gives yeast 2 ATP per glucose.
Flocculation
Yeast cells clumping together and dropping out of suspension. Food tech example: premature flocculation that stalls a hot fermentation.
Higher alcohols
Alcohols larger than ethanol, made in small amounts during fermentation, that can spoil flavour. Food tech example: extra higher alcohols in a fermentation that ran too hot.
Analyser
The first column in a two-column still, which strips alcohol out of the fermented liquid. Food tech example: the analyser in a beverage distillery.
Rectifier
The second column, which purifies alcohol vapour and lifts it to about 95%. Food tech example: the rectifier that makes rectified spirit.
Azeotrope
A mixture that boils as one at a fixed composition. Food tech example: ethanol and water at about 95% ethanol and 5% water.
Single-cell protein
Microbial cells harvested as a protein-rich feed material. Food tech example: spent yeast from ethanol fermentation used as animal feed.
References
- Ethanol Production. Course lecture deck, used for prefermenter culture, fermentation conditions, distillation systems, recovery, and uses.
- Biochemistry of Ethanol Fermentation. Course lecture deck, used for the fermentation equation, the 12-step pathway, ATP yield, and theoretical and practical yields.
- Fermentation Technology. Course lecture deck, used for the definition of fermentation and the history of zymology.
- Hui, Y. H., Meunier-Goddik, L., Hansen, A. S., Josephsen, J., Nip, W. K., Stanfield, P. S., and Toldra, F. (editors). Handbook of Food and Beverage Fermentation Technology. Marcel Dekker, 2004.
Unit 5: Technology of Brewing
Note
Unit 5: Technology of Brewing
Beer is the oldest manufactured drink in the world, and it is also one of the most controlled. A brewer manages living yeast, fragile enzymes, and a bitter flower, and must land the same flavour in every glass. The steps look simple on paper: malt, mash, boil, ferment, rest. The skill is in the control at each step, and this unit walks the brewhouse in order.
5.1 Introduction: what beer is
Beer is a fermented drink made from malted grain, water, hops, and yeast. It is brewed, not distilled, and it is served with carbon dioxide dissolved in it, which gives the foam and the lively mouthfeel. The alcohol is commonly around 4-6% by volume, though stronger and weaker beers exist, and the drink is mildly acidic, bitter from hops, and full of flavour from the malt.
Beer matters to food technology for three reasons. First, it is a model fermentation: the same yeast, the same sugar-to-alcohol chemistry, and the same control problems as every other fermented drink. Second, it is a model of raw-material control: the malt, the water, and the hops each bring a character that must be managed. Third, it is a drink where quality is judged by the senses as much as by the laboratory, so the brewer works with both numbers and tasting panels.
The history is long. The earliest evidence of an alcoholic drink made from grain and other materials dates to about 7000-6600 BC, and winemaking dates to about 6000 BC. Louis Pasteur founded the science of fermentation in 1856 when he connected yeast to fermentation, and Eduard Buchner showed in 1897 that yeast extracts could ferment sugar without living cells, through an enzyme complex he called zymase. Modern brewing stands on that science: the brewer manages living cells and their enzymes, not luck.
Quick check
What four materials make beer, and what gives it its foam?
Check your answer
Malted grain, water, hops, and yeast. Carbon dioxide dissolved in the beer gives the foam and the lively mouthfeel.
5.2 Raw materials for beer
Malted barley
Barley is the usual grain, and malting is the process that prepares it. The grain is steeped in water, allowed to germinate, and then dried in a kiln. Germination switches on the enzymes that cut starch into sugars, and kilning stops the growth and sets the colour and flavour. Pale malt is dried gently and gives a light beer; darker malts are heated more and give colour, roast notes, and body. The malt is the source of the sugar, and also of much of the flavour and the colour.
Water
Water is the largest ingredient in beer, and its mineral content shapes the taste. Calcium helps the enzymes work in the mash and helps the yeast settle later. Sulphate sharpens the hop bitterness, while chloride rounds and softens the flavour. Brewers have always adjusted their water to suit their beer style, and modern breweries treat and test their water as carefully as any other raw material.
Hops
Hops are the cone-shaped flowers of the hop plant. They give beer its bitterness, which balances the sweetness of the malt, and they give aroma: floral, citrus, herbal, or spicy notes depending on the variety. Hops also have a mild preservative effect, which helps the beer keep. They are added during the boil, and sometimes again later for aroma.
Yeast
Yeast is the living worker. Two families dominate brewing:
- Ale yeast (Saccharomyces cerevisiae) ferments warm, around 18-22 °C, rises to the top of the vessel, and works fast, giving fruity, full flavours.
- Lager yeast (Saccharomyces pastorianus) ferments cool, around 8-12 °C, settles to the bottom, and works slowly, giving a clean, crisp flavour.
The yeast strain is part of the brand: the same wort fermented with two different yeasts gives two different beers.
🤔 Pause and think: the same malt, water, and hops can give an ale or a lager depending on the yeast and the temperature. What does that tell you about which ingredient matters most for the style?
Quick check
What does malting do to barley, and why does it matter?
Check your answer
Steeping and germination switch on the enzymes that cut starch into sugars, and kilning stops growth and sets colour and flavour. Without it, the yeast would have no sugar to ferment.
5.3 Types of beer
Beers are usually sorted by yeast and fermentation temperature, and then by colour and strength:
- Lager. Cool-fermented with lager yeast, clean and crisp, and stored cold to mature. The most widely drunk style in the world, usually pale gold and around 4-5% alcohol.
- Ale. Warm-fermented with ale yeast, fruity and full, with many sub-styles from pale ale to brown ale.
- Stout and porter. Dark beers made with roasted malts, with coffee and chocolate notes, and a full body.
- Pilsner. A pale, hoppy lager, bright and bitter, named after its city of origin and now made worldwide as a style, not a place.
- Wheat beer. Brewed with a large share of wheat malt, pale, cloudy, and soft, often with a light spicy or fruity note from the yeast.
- Strong beers. Higher alcohol versions of the same families, made from a richer wort with more sugar for the yeast to work on.
The style names describe the process and the taste, not the place. A pilsner brewed far from its namesake city is still a pilsner if it follows the style.
Quick check
What separates a lager from an ale?
Check your answer
The yeast and the temperature: lager yeast ferments cool, around 8-12 °C, and settles to the bottom, while ale yeast ferments warm, around 18-22 °C, and rises to the top.
5.4 Production of beer, step by step
Step 1: Malting
Barley is steeped, germinated, and kilned, as described in section 5.2. The malt is then milled to a coarse grist, cracked open so the insides are exposed but the husks stay mostly whole, because the husks later act as the filter bed.
Step 2: Mashing
The grist is mixed with hot water in the mash tun. The malt enzymes wake up and cut the starch into sugars, mainly maltose, and the mixture becomes a sweet liquid called wort. The temperature is held carefully: too cool and the enzymes work slowly, too hot and they are destroyed. The liquid is then run off through the husk bed, which filters it clear, and the grains are rinsed with hot water, called sparging, to wash out the remaining sugar.
Step 3: Boiling and hopping
The wort is boiled, usually for about an hour. Boiling does several jobs at once: it sterilises the wort, it stops the enzymes, it drives off unwanted volatile notes, and it concentrates the liquid slightly. Hops are added during the boil, early additions for bitterness and late additions for aroma, because the bitter compounds need boiling time to form while the aroma oils would boil away if added too early. After the boil, the hot wort is cooled quickly to fermentation temperature, so that unwanted microbes cannot grow in it.
Step 4: Fermentation
Yeast is pitched into the cooled wort, and fermentation runs for several days. The yeast turns sugar into alcohol and carbon dioxide, and it also makes the flavour compounds that give each beer its character. Ale fermentations run warm and fast, lager fermentations run cool and slow. The brewer watches the gravity fall with a hydrometer and the temperature with a thermometer, and the beer is not moved until the fermentation is complete.
Step 5: Conditioning and packaging
The young beer, called green beer, is harsh and cloudy. It is conditioned, rested cold so the yeast settles, the flavours marry, and the harsh notes fade. Lagers are stored cold for weeks, which is where the name lager comes from: the German word for storage. The beer is then filtered or left cloudy according to style, carbonated to its target level, and packaged into bottles, cans, or kegs.
The brewing line, from barley to packaged beer
↓
↓
↓
↓
↓
↓
Figure 5.1: The brewing line, from barley to packaged beer. Each box is a control point: temperature in the mash, time in the boil, temperature in the fermenter, and time in conditioning. Drawn from the brewing descriptions in Hui and others, Handbook of Food and Beverage Fermentation Technology (2004), and Rose, Yeasts in Food and Beverages (2006).
Quick check
What are the five main steps of beer production, in order?
Check your answer
Malting, mashing, boiling and hopping, fermentation, and conditioning and packaging.
5.5 Quality attributes of beer
A good beer is judged on several attributes, and each one traces back to a step in the process:
- Appearance. Bright and clear for most lagers, or hazy by design for a wheat beer. The colour should match the style, from pale gold to near black. A good head of foam that lasts is a sign of sound brewing and clean glassware.
- Aroma. Fresh malt, hops, and yeast notes, with no stale, sour, or sulphury off-notes. The aroma should match the style: hoppy for a pilsner, malty for a stout.
- Taste. Balance is the word: malt sweetness against hop bitterness, with no harsh, sour, or metallic notes. The bitterness should be clean, not lingering and rough.
- Mouthfeel and carbonation. The beer should feel lively, not flat and not over-gassy, and the body should match the style: light for a lager, full for a stout.
- Stability. The beer should stay bright and fresh for its shelf life, without haze forming, without staling, and without gushing when opened. Gushing, beer foaming out on opening, is a sign of infection or of a fault in the raw materials.
- Alcohol and gravity. The alcohol by volume and the original gravity, the sugar level before fermentation, are measured and must match the label and the brand target.
The laboratory checks behind these senses are simple and regular: alcohol by volume, pH, colour, bitterness units, dissolved carbon dioxide, and microbial counts. A brewery that measures these on every batch can catch a drift before the drinker does.
🤔 Pause and think: a beer tastes fine on the day it is packaged but stale after a month on a warm shelf. Which quality attribute failed, and which step in the process should have protected it?
Quick check
Name four quality attributes of beer and one laboratory measurement behind them.
Check your answer
Appearance, aroma, taste, mouthfeel and carbonation, and stability. Laboratory measures include alcohol by volume, pH, colour, bitterness units, dissolved carbon dioxide, and microbial counts.
5.6 What goes wrong: common beer faults
| Fault | What you notice | Likely cause |
|---|---|---|
| Sour taste | Vinegar or sharp sour note | Infection by acid-forming bacteria |
| Stale, cardboard taste | Flat, papery flavour | Oxygen pickup, warm or long storage |
| Sulphury smell | Rotten egg note | Yeast stress, poor fermentation control |
| Haze | Cloudy beer that should be bright | Protein or yeast still in suspension, chill haze |
| Gushing | Beer foams out on opening | Infection, or faulty raw material |
| No head | Foam dies at once | Fatty contamination, poor glass cleaning, low carbonation |
| Diacetyl, buttery note | Butterscotch flavour | Young beer, incomplete conditioning |
Most faults trace back to the same few causes: infection, oxygen, temperature, and time. The brewer's defence is the same at every step: clean equipment, controlled temperature, and enough conditioning time.
Quick check
Your beer smells of butterscotch. What is the fault called, and what fixes it?
Check your answer
Diacetyl. It is a sign of young or incompletely conditioned beer, and longer conditioning lets the yeast clean it up.
5.7 Worked example: mash enzymes and gravity to alcohol
Two numbers run a brewhouse: the mash temperature and the gravity fall. Both are worth working through once with real figures.
The mash enzymes. Two malt enzymes do most of the starch cutting, and each has its own working temperature. Beta-amylase is most active near 60-65 °C: it cuts starch into maltose, the sugar yeast ferments most easily, so a mash held there gives a wort that ferments dry and clean. Alpha-amylase is most active near 68-72 °C: it cuts starch at random points into larger pieces, so a mash held there gives a wort with more body and a sweeter finish. A brewer who wants a dry beer mashes cooler, and a brewer who wants a full beer mashes warmer, and that one temperature choice is felt in every glass. Above about 75 °C both enzymes are destroyed, which is why the mash is never boiled.
Worked example: gravity to alcohol. A brewer measures the wort before fermentation at an original gravity of 1.050 and after fermentation at a final gravity of 1.010. The fall is 1.050 - 1.010 = 0.040, or 40 gravity points. A plant-floor approximation used across brewing is: alcohol by volume = gravity fall x 131.25. So 0.040 x 131.25 = 5.25% alcohol by volume. The same arithmetic checks a label: a beer that claims 5% but shows a fall of only 20 points, about 2.6%, has a measurement or a labelling problem. The gravity reading is taken with a hydrometer, at the same temperature each time, because a warm sample reads lighter than a cold one.
Quick check
A wort reads 1.048 before fermentation and 1.008 after. What is the approximate alcohol by volume?
Check your answer
The fall is 0.040, and 0.040 x 131.25 = 5.25% alcohol by volume.
5.8 Practical note: general quality test of beer
The laboratory practical for this subject asks for a general quality test of beer. At the bench, the routine checks are: appearance and foam in a clean glass, aroma, taste, alcohol by volume, pH, and a check for haze after chilling. Pour the beer gently, note how long the head lasts, and record the colour against a white background. Compare every result with the brand target, and write the numbers down: a quality test that lives only in memory is not a test.
Quick check
Why pour beer into a clean glass for the quality test instead of drinking from the bottle?
Check your answer
The glass shows the colour, the clarity, and the head, and a dirty glass kills the foam, so the glass is part of the test.
5.9 Check yourself
Think about it first: a lager and an ale are brewed from the same malt, water, and hops. One comes out clean and crisp, the other fruity and full. What single choice made the difference, and at which step was it made?
- What is wort, and how is it made?
Check your answer
Wort is the sweet liquid from mashing: malt grist mixed with hot water so the malt enzymes cut starch into sugars, then run off through the husk bed.
- Why are hops added at different times during the boil?
Check your answer
Early additions give bitterness, because the bitter compounds need boiling time to form. Late additions give aroma, because aroma oils would boil away if added too early.
- What is the difference between ale and lager fermentation?
Check your answer
Ale yeast ferments warm, around 18-22 °C, rises to the top, and works fast with fruity flavours. Lager yeast ferments cool, around 8-12 °C, settles to the bottom, and works slowly with a clean flavour.
- What is conditioning, and why does a lager rest cold?
Check your answer
Resting the young beer so yeast settles, flavours marry, and harsh notes fade. Lagers rest cold for weeks, which is where the name lager, meaning storage, comes from.
- A brewer mashes at 62 °C for one batch and 70 °C for the next, using the same malt. Which batch finishes drier, and why?
Check your answer
The 62 °C batch: beta-amylase is most active near 60-65 °C and makes maltose, which yeast ferments fully, while the warmer mash favours alpha-amylase and leaves more body.
Try it yourself: Read the label of any beer you can see in a shop (no purchase needed) and note the style name, the alcohol by volume, and any mention of hops or malt. Then write two sentences: one saying which yeast family the style most likely uses and why, and one saying which raw material you think dominates its flavour.
Key ideas to carry forward
- Beer is a brewed, not distilled, drink from malted grain, water, hops, and yeast, commonly around 4-6% alcohol.
- Malting switches on the enzymes that cut starch into sugars, and kilning sets colour and flavour.
- Water minerals shape the taste, hops give bitterness and aroma, and yeast gives the style.
- The production line is malting, mashing, boiling and hopping, fermentation, and conditioning and packaging.
- Ales ferment warm and fast with top yeast; lagers ferment cool and slow with bottom yeast.
- Quality is judged by appearance, aroma, taste, mouthfeel, carbonation, and stability, backed by laboratory measures.
- Most beer faults trace to infection, oxygen, temperature, and time.
- Mash temperature steers the beer: beta-amylase near 60-65 °C gives a dry fermentable wort, alpha-amylase near 68-72 °C gives body, and a gravity fall of 40 points means about 5.25% alcohol.
Glossary
Malt
Barley that has been steeped, germinated, and kilned so its starch-cutting enzymes are active. Food tech example: pale malt for a light lager, dark malt for a stout.
Wort
The sweet liquid from mashing, holding the sugars the yeast will ferment. Food tech example: wort run off through the husk bed after mashing.
Mashing
Mixing malt grist with hot water so enzymes cut starch into sugars. Food tech example: holding the mash at a controlled temperature so the enzymes work fully.
Sparging
Rinsing the grain bed with hot water to wash out remaining sugars. Food tech example: sparging after the first wort has run off.
Hops
The cone flowers of the hop plant, giving bitterness, aroma, and a mild preservative effect. Food tech example: hops added early in the boil for bitterness, late for aroma.
Ale yeast
Saccharomyces cerevisiae, fermenting warm around 18-22 °C and rising to the top. Food tech example: the yeast for a fruity pale ale.
Lager yeast
Saccharomyces pastorianus, fermenting cool around 8-12 °C and settling to the bottom. Food tech example: the yeast for a clean, crisp lager.
Conditioning
Resting young beer, usually cold, so yeast settles and flavours marry. Food tech example: lagering a lager for weeks before packaging.
Green beer
Young beer straight from fermentation, harsh and cloudy before conditioning. Food tech example: green beer rested cold until it smooths out.
Original gravity
The density of the wort before fermentation, read on a hydrometer, showing how much sugar is present. Food tech example: a wort at 1.050 before the yeast is pitched.
Final gravity
The density of the beer after fermentation, showing how much sugar is left. Food tech example: a beer at 1.010 when fermentation is complete.
Diacetyl
A buttery, butterscotch flavour compound, a sign of young or incompletely conditioned beer. Food tech example: diacetyl fading during proper conditioning.
References
- Hui, Y. H., Meunier-Goddik, L., Hansen, A. S., Josephsen, J., Nip, W. K., Stanfield, P. S., and Toldra, F. (editors). Handbook of Food and Beverage Fermentation Technology. Marcel Dekker, 2004.
- Rose, A. H. (editor). Yeasts in Food and Beverages. Springer, 2006.
- Tamang, J. P. Fermented Foods and Beverages of the World. CRC Press, 2010.
- Fermentation Technology. Course lecture deck, used for the definition of fermentation and the history of zymology.
Unit 6: Distilled and Non-Distilled Alcoholic Beverages
Note
Unit 6: Distilled and Non-Distilled Alcoholic Beverages
Wine, brandy, rum, vodka, gin, whiskey, sake, jaanr, raksi. Nine names, two families. The non-distilled family keeps everything the fermentation made. The distilled family keeps only what the still carries over. This unit walks both families, drink by drink, and ends with the two skills that hold them together: blending and flavouring.
6.1 The two families, side by side
The split from Unit 1 is the spine of this unit. Non-distilled drinks are fermented and served: the yeast makes the alcohol, and the drink is clarified, rested, and bottled. Distilled drinks are fermented and then heated: the still lifts the alcohol out, and the drink is blended, flavoured, rested, and bottled. The non-distilled family is milder, and its flavour is the flavour of the raw material. The distilled family is stronger, and its flavour is the flavour the still allowed through, plus whatever the maker adds afterwards.
The two families from one fermentation
Grape, grain, rice, or cane.
↓
↓
Wine, jaanr, sake, beer.
Vapour rises and condenses. The result is brandy, rum, vodka, gin, whiskey, or raksi.
Figure 6.1: The two families from one fermentation. The still is the fork in the road. Drawn from the fermentation and distillation descriptions in Tamang, Fermented Foods and Beverages of the World (2010).
Quick check
What single step decides whether a drink belongs to the distilled or the non-distilled family?
Check your answer
Distillation: heating the fermented liquid and condensing the alcohol-rich vapour. Non-distilled drinks skip that step.
6.2 Non-distilled: wine
Wine is fermented fruit juice, most often grape juice. The sugar is already free in the juice, so no malting or mould step is needed, and the yeast works directly on it. The production line is short and the control points are clear:
- Crush and press. The fruit is crushed and the juice is separated from skins and seeds, or left with the skins for red wine, where the skins give the colour.
- Ferment. Yeast turns the sugar into alcohol and carbon dioxide. Red wines ferment with the skins, white wines without them, and the temperature is controlled so the yeast works steadily.
- Clarify. The young wine is racked, moved off the settled yeast and solids, and left to clear.
- Age and bottle. The wine rests in tank or wood, the flavours marry, and it is bottled when it is stable and clear.
Wine is commonly around 11-14% alcohol by volume for a table wine. Its quality attributes are colour, clarity, aroma, taste, and balance: fruit against acid, and body against finish. Its faults are familiar to any drinker: vinegar notes from acetic bacteria, musty notes from cork or storage faults, and oxidation from air, which turns the colour brown and the flavour flat.
Quick check
Why does red wine ferment with the skins while white wine does not?
Check your answer
The skins give red wine its colour. White wine is pressed off the skins so it stays pale.
6.3 Non-distilled: jaanr
Jaanr is the cereal brew of the Himalayan regions, and it belongs in this family because it is fermented and served without distillation. Its making follows the amylolytic-starter pattern: cooked cereal is mixed with marcha, the dry mixed starter, and left to ferment. The moulds in the marcha cut the starch into sugars, the yeasts turn the sugars into alcohol, and the lactic acid bacteria add acidity and flavour. The drink is mildly alcoholic, slightly acidic, and milky white, and the common types are named for their grain: kodo ko jaanr from finger millet, bhaati jaanr from rice, makai ko jaanr from maize, and gahoon ko jaanr from wheat.
The pH falls during fermentation as acids build up, and the drink is usually consumed fresh, within days, often by straining the liquid from the fermented mass. The spent grain is not wasted: it is used as animal feed, a neat example of full use of the raw material.
Honesty note: the books used here describe jaanr in general terms: its starter, its grains, its microbes, and its character. They give no fixed recipe, no fixed fermentation time or temperature, and no fixed alcohol figure, because these vary by grain, starter, and maker. This unit reports what the sources support and says plainly where they stop. Do not treat any single number for jaanr as a standard: there is none in the sources.
🤔 Pause and think: wine needs no starter beyond yeast, but jaanr needs a mixed starter carrying moulds, yeasts, and bacteria. What is different about the raw material that makes the extra microbes necessary?
Quick check
Name the three microbe groups in marcha and the job of each in jaanr.
Check your answer
Moulds cut the starch into sugars, yeasts turn the sugars into alcohol, and lactic acid bacteria add acidity and flavour.
6.4 Non-distilled: sake, again, in its family place
Sake sits in the non-distilled family, and it earns its place here because it is brewed, not distilled. Its process was described in Unit 1, and it is worth restating in one line: steamed rice plus koji, rice carrying Aspergillus oryzae, gives sugars, and Saccharomyces cerevisiae ferments them in the same tank, in a parallel fermentation. The drink is stronger than most beers and sits in the range of table wines in strength, and it is served as a brewed drink.
Honesty note: as in Unit 1, the sources describe the sake process in general terms only. They do not give a standard recipe, a fixed polishing ratio, or a fixed alcohol figure, and those details vary widely between makers. This unit states only what the sources support.
Quick check
Is sake distilled or non-distilled, and what proves it?
Check your answer
Non-distilled: it is brewed by parallel fermentation and served without a distillation step.
6.5 Distilled: brandy, rum, vodka, gin, whiskey
The distilled family shares one production spine: ferment, distil, then blend, flavour, rest, and bottle. The drinks differ in their raw material and in what happens after the still.
- Brandy. Distilled from wine. The grape character survives the still, and the spirit is usually aged in wood, which adds colour and smoothness. The flavour is fruity and warm.
- Rum. Distilled from sugar cane products, most often molasses. The cane note survives, and the spirit may be aged in wood or bottled young. The flavour is sweet and full.
- Vodka. Distilled to a high strength and purified until almost no flavour remains. The point is cleanness, and the drink is usually served cold and unaged.
- Gin. A neutral spirit flavoured with juniper berries and other plant materials, by infusion or by redistilling the spirit with the flavourings. The flavour is herbal and pine-like, and the drink is bottled without wood ageing.
- Whiskey. Distilled from malted or unmalted grain and aged in wood. The grain flavour and the wood flavour build together over months or years, and the colour comes from the wood.
One spine, five flavours
Wine, distil, age in wood.
Molasses, distil, age or not.
Grain, distil, purify hard.
Neutral, flavour with juniper.
Grain, distil, age in wood.
Jaanr, distil in pot still.
Figure 6.2: One spine, five flavours. The raw material and the after-still treatment make the drink. Drawn from the drink descriptions in Tamang, Fermented Foods and Beverages of the World (2010), and Hui and others, Handbook of Food and Beverage Fermentation Technology (2004).
Quick check
Which two distilled drinks in this section are usually aged in wood, and which one is purified until it has almost no flavour?
Check your answer
Brandy and whiskey are usually aged in wood. Vodka is purified until it has almost no flavour.
6.6 Distilled: raksi, the traditional pot-still spirit
Raksi is the distilled partner of jaanr, and it is the best-documented traditional spirit in the books used for this subject. A fermented cereal mash, bhaati jaanr, kodo ko jaanr, makai ko jaanr, gahoon ko jaanr, or fermented masses of buckwheat, potato, or cassava, is distilled in a large cylindrical metal vessel, about 40 cm by 30 cm by 25 cm, heated over firewood for 2-3 hours. Above the vessel sits a perforated container called the phunga, holding a small collector called the poini on an iron tripod, the odhan. Above that sits a vessel of cold water, which acts as the condenser, and the joint is plastered with mud to stop vapour escaping.
The condensing water is replaced three to five times as it heats up. Raksi made after three replacements is called theen pani raksi, and it holds a high amount of alcohol and is traditionally prepared for religious purposes. Raksi made after five replacements is called panch pani raksi, and it is the common drinking form. A traditional run distils 2-4 kg of jaanr to give 1-2 litres of raksi, and the alcohol content is reported at about 22-27% by volume. The spirit is usually stored in bottles capped with a piece of dry corncob, and sometimes rhododendron petals are mixed in during distillation to give a distinct aroma.
Honesty note: the 22-27% figure is a reported range from traditional practice, not an industrial specification, and the process varies by maker and by grain. The books give no standardised commercial specification for raksi, and this unit does not invent one.
Quick check
What is the difference between theen pani raksi and panch pani raksi?
Check your answer
Theen pani raksi is made after replacing the condensing water three times, holds more alcohol, and is traditionally prepared for religious purposes. Panch pani raksi is made after five replacements and is the common drinking form.
6.7 Blending: holding a brand together
Blending was introduced in Unit 2, and it deserves its place here because it is the step that makes the distilled family consistent. No two distillation runs are identical, so the blender mixes spirits from different runs, and sometimes different ages, to land on the brand target. The blender tastes and measures each lot, works out the mix, and tests the blend before bottling. A blend that is not tested before bottling cannot be fixed after it.
Blending also applies to the non-distilled family: wines from different tanks or different harvests are blended to a consistent house style. The principle is the same in both families: the blend is the product, and the single lot is the ingredient.
Quick check
Why is a blend tested before bottling, never after?
Check your answer
Once the bottle is sealed, the formula is fixed and cannot be corrected.
6.8 Specification in practice: reading a label
A specification stops being abstract the moment you read a bottle label, because the label is the public face of the specification. The alcohol by volume is printed there, and it must match the batch test. The name tells the family: wine, brandy, rum, vodka, gin, whiskey, or raksi, and the name carries a promise about the raw material and the process. A brandy that was not distilled from wine would break that promise, and a gin with no juniper character would break its own.
The label also shows what the maker chose to declare: the age for an aged spirit, the flavour for a flavoured one, and the origin of the style where the style name carries one. The laboratory checks behind the label are the same checks from section 6.9: strength, clarity, colour, flavour, and the absence of off-notes. A student who can read a label and name the specification behind each line has understood this unit, because the label is the specification written for the buyer.
Quick check
A bottle is labelled whiskey but was distilled from cane molasses and never aged in wood. Which two promises on the label are broken?
Check your answer
The raw material promise, whiskey comes from grain, not cane, and the ageing promise, whiskey gains its character from resting in wood.
6.9 Flavouring and specification
Flavouring is the deliberate addition of character after distillation, and specification is the written standard the drink must meet. The flavouring methods are: flavour from the raw material, flavour from infusion, flavour from added essence, and flavour from wood ageing, as described in Unit 2. A specification ties them together: it states the alcohol by volume, the colour, the clarity, the flavour notes, and the allowed limits for impurities, and every batch is tested against it.
The specification is also a safety document. It states what must not be present, and it gives the laboratory the numbers to check: alcohol strength, acidity, and the absence of off-notes. A drink without a specification is a drink without a standard, and a brand without a standard cannot be repeated.
🤔 Pause and think: raksi has a reported alcohol range but no industrial specification in the books. What would a maker need to write before raksi could be sold as a standardised brand, and which of those items are missing?
Quick check
What does a specification state, and who uses it?
Check your answer
It states the alcohol by volume, colour, clarity, flavour notes, and limits for impurities. The laboratory tests every batch against it.
6.10 Worked example: blending two lots to one target
A blender has two lots of whiskey spirit and one target. Lot A is 700 litres at 45% alcohol by volume, and lot B is 300 litres at 35%. Neither lot matches the brand target of 42%, but together they do.
- Alcohol in lot A. 700 x 0.45 = 315 litres of pure alcohol.
- Alcohol in lot B. 300 x 0.35 = 105 litres of pure alcohol.
- Blend strength. Total alcohol is 315 + 105 = 420 litres, total volume is 700 + 300 = 1,000 litres, so the blend is 420 ÷ 1,000 = 42% alcohol by volume, exactly the target.
- Test before bottling. The blend is measured for strength, checked for clarity and colour, and tasted against the reference sample. Only when all three match does it go to the bottle.
The same arithmetic works for wine: two tanks at different acidities or colours are blended in measured parts until the house style is met. The rule never changes: calculate first, mix second, test third, and never bottle a blend that has not been tested.
Quick check
A blender mixes 400 litres at 50% with 600 litres at 30%. What is the strength of the blend?
Check your answer
Alcohol is 200 + 180 = 380 litres in 1,000 litres, so the blend is 38% alcohol by volume.
6.11 Practical note: wine in the laboratory
The laboratory practical for this subject asks for preparation of wine in the laboratory and its quality test. At the bench, the small-scale version is: crush fruit, press the juice, add yeast, ferment at a controlled temperature, rack the young wine off the sediment, and test it. The quality test covers appearance, clarity, aroma, taste, alcohol by volume, and acidity. The bench wine teaches the same lesson as the factory: the fermentation must be watched, the temperature must be held, and the wine must be racked before the settled yeast gives it off-flavours.
Quick check
Why is young wine racked off its sediment?
Check your answer
Leaving it on the settled yeast and solids gives off-flavours, so the clear wine is moved off and left to finish clearing.
6.12 Check yourself
Think about it first: a maker ferments a cereal mash and splits it in half. One half is bottled as it is, the other half is distilled. Which half is stronger, which half keeps more of the grain flavour, and which half needs a specification for alcohol strength more urgently?
- Sort these into distilled and non-distilled: wine, brandy, jaanr, rum, sake, whiskey.
Check your answer
Non-distilled: wine, jaanr, sake. Distilled: brandy, rum, whiskey.
- What is the raw material of rum, and what is the raw material of brandy?
Check your answer
Rum is distilled from sugar cane products, most often molasses. Brandy is distilled from wine.
- Describe the traditional raksi still in one sentence.
Check your answer
A fermented mash is heated in a metal vessel, the vapour rises through a perforated container holding a collector, and a cold-water vessel on top condenses the spirit into it.
- How much jaanr does a traditional run distil, and how much raksi does it give?
Check your answer
2-4 kg of jaanr gives 1-2 litres of raksi, in a run of about 2-3 hours.
- A blender has 500 litres at 44% and 500 litres at 36%. What is the blend strength, and is it on a 40% target?
Check your answer
Alcohol is 220 + 180 = 400 litres in 1,000 litres, so 40%, exactly on target.
Try it yourself: Take the six drinks in question 1 and write one line for each, naming its raw material and whether it is distilled. Then add a second line for each, naming one flavour step that happens after fermentation, such as wood ageing, juniper flavouring, or purification. The drinks with no after-step are the ones whose flavour comes entirely from the fermentation.
Key ideas to carry forward
- The two families split at the still: non-distilled drinks are fermented and served, distilled drinks are fermented and then heated.
- Wine is fermented fruit juice, commonly around 11-14% alcohol, clarified by racking and aged before bottling.
- Jaanr is a fermented cereal brew made with marcha, mildly alcoholic and slightly acidic, with types named for their grain.
- Sake is a brewed, non-distilled rice drink made by parallel fermentation.
- Brandy comes from wine, rum from cane products, vodka from heavy purification, gin from juniper flavouring, and whiskey from grain aged in wood.
- Raksi is distilled from a fermented cereal mash in a traditional pot still, at about 22-27% alcohol, with theen pani and panch pani forms.
- Blending mixes lots to one target, flavouring adds character, and specification writes the standard every batch must meet.
- A worked blend turns lots into a target: 700 litres at 45% plus 300 litres at 35% gives 1,000 litres at 42%, and the blend is always tested before bottling.
Glossary
Racking
Moving young wine off its settled yeast and solids into a clean vessel. Food tech example: racking wine so it clears without picking up off-flavours.
Brandy
A spirit distilled from wine, usually aged in wood. Food tech example: brandy keeping a fruity grape character after distillation.
Rum
A spirit distilled from sugar cane products, most often molasses. Food tech example: rum carrying a sweet cane note.
Vodka
A spirit distilled and purified until it has almost no flavour. Food tech example: vodka served cold and unaged.
Gin
A neutral spirit flavoured with juniper berries and other plant materials. Food tech example: gin made by redistilling spirit with juniper.
Whiskey
A spirit distilled from grain and aged in wood. Food tech example: whiskey gaining colour and smoothness from the cask.
Phunga
The perforated container in a traditional raksi still that holds the collector. Food tech example: vapour passing through the phunga to the cold condenser above.
Poini
The small metal collector in a traditional raksi still that catches the condensed spirit. Food tech example: raksi dripping into the poini.
Theen pani raksi
Raksi made after replacing the condensing water three times, higher in alcohol. Food tech example: theen pani raksi prepared traditionally for religious purposes.
Panch pani raksi
Raksi made after replacing the condensing water five times, the common drinking form. Food tech example: panch pani raksi served as the everyday spirit.
References
- Tamang, J. P. Fermented Foods and Beverages of the World. CRC Press, 2010.
- Tamang, J. P. Himalayan Fermented Foods: Microbiology, Nutrition, and Ethnic Values. CRC Press, 2010.
- Hui, Y. H., Meunier-Goddik, L., Hansen, A. S., Josephsen, J., Nip, W. K., Stanfield, P. S., and Toldra, F. (editors). Handbook of Food and Beverage Fermentation Technology. Marcel Dekker, 2004.
- Ethanol Production. Course lecture deck, used for distillation systems.
Unit 7: Water Requirements for Different Beverages
Note
Unit 7: Water Requirements for Different Beverages
Water is the quiet ingredient. It is 90% or more of most drinks, it carries every flavour, and it is the ingredient most often taken for granted. Yet the same water that makes a bright, clean soft drink can ruin a beer, cloud a spirit, or stall a fermentation. Why does each drink need different water? This unit answers that question, drink by drink.
7.1 Why water matters more than its share suggests
Water is the largest ingredient in almost every beverage by volume. In a soft drink it is most of the bottle. In a beer it is most of the brew. In a diluted spirit it is half the bottle. And in every case it does more than fill space: it dissolves the sugar, carries the flavour, sets the mouthfeel, and decides whether the drink stays bright or turns cloudy.
That is why beverage makers treat water as a raw material with a specification, not as a utility that comes out of a tap. The specification states what the water must be: clear, tasteless, odourless, free of harmful microbes, and holding the right minerals in the right amounts. The numbers in the specification change from drink to drink, and that change is the subject of this unit.
How this unit is built: the syllabus lists this unit as not broken down, so it is expanded here from the books. The water-treatment chapter of Shachman, The Soft Drinks Companion (2005), supplies the treatment methods and the multiple-barrier idea. The brewing material in Hui and others, Handbook of Food and Beverage Fermentation Technology (2004), and in Rose, Yeasts in Food and Beverages (2006), supplies the brewing water needs. The fermentation decks supply the fermentation conditions. Each section below names the drink first and the water it needs second.
🤔 Pause and think: if water is 90% of a soft drink, why do makers spend more time talking about flavour than about water? What would a drinker notice first if the water went wrong?
Quick check
Why is water treated as a raw material with a specification, not as a utility?
Check your answer
It is the largest ingredient by volume, it dissolves sugar, carries flavour, and sets mouthfeel, and bad water can cloud, spoil, or ruin the taste of the drink.
7.2 What can be wrong with raw water
Raw water, water as it arrives from a well, a river, or a municipal supply, can carry four kinds of problems, and the treatment plant must deal with all four:
- Suspended matter. Particles of clay, silt, and organic matter that make the water cloudy and can carry microbes with them.
- Chemical composition. Dissolved salts that set hardness and alkalinity, iron and manganese that stain and darken, and traces of substances that give taste or odour.
- Microorganisms. Bacteria, yeasts, and moulds that can spoil the drink or, in the worst case, harm the drinker.
- Variation. The source changes with the season, the weather, and the supply, so the water that was fine last month may not be fine today.
The treatment plant answers with the multiple barrier concept: no single step is trusted alone. Several steps in a row, each removing a different problem, guard the water, so that if one step weakens, the next one still protects the drink. That idea runs through Unit 8 in detail; this unit states the needs that the barriers must meet.
Quick check
Name the four kinds of problems raw water can carry.
Check your answer
Suspended matter, chemical composition such as hardness and iron, microorganisms, and variation over time.
7.3 Water for soft drinks: clean, soft, and neutral
A soft drink needs water that disappears: no colour, no taste, no odour, and no minerals that interfere with the flavour, the acid, or the carbonation. The reasons are practical:
- Flavour. The drink's flavour is added by the maker, and any taste in the water competes with it. A faint earthy or chlorinous note in the water becomes a clear off-note in the finished drink.
- Clarity and carbonation. Suspended particles cloud the drink, and dissolved salts can disturb the carbonation, making the fizz uneven or the drink flat.
- Sweetener and acid balance. Hardness salts, especially calcium and magnesium, can react with the acids and flavourings, shifting the taste and sometimes forming a haze.
- Microbial safety. The water must be free of microbes that could ferment the sugar or spoil the drink on the shelf.
So the soft-drink specification calls for water that is clear, soft, low in dissolved salts, and microbiologically clean. It is the most demanding water in the beverage world, because the water is the drink, and there is nowhere for a fault to hide.
Quick check
Why does a soft drink need soft, low-salt water?
Check your answer
Hardness salts can react with acids and flavourings, shift the taste, disturb carbonation, and form haze, and any taste in the water competes with the added flavour.
7.4 Water for beer: minerals are part of the recipe
Beer is the opposite of a soft drink in its water needs: the minerals are not a problem to remove, they are part of the recipe. The brewer wants certain ions in certain amounts, because they shape the beer:
- Calcium. Helps the mash enzymes work, helps the yeast settle at the end of fermentation, and protects the beer against haze. Brewers usually want a good level of calcium in their brewing water.
- Sulphate. Sharpens and dries the hop bitterness. A water high in sulphate suits a bitter, hoppy beer.
- Chloride. Rounds and softens the flavour and adds fullness to the mouthfeel. A water higher in chloride suits a malty, soft beer.
- Bicarbonate and alkalinity. Raise the pH of the mash, which can dull the enzymes and darken the beer. Brewers of pale beers usually want low alkalinity, and they may treat the water to reduce it.
- Iron and manganese. Unwanted in any brewing water: iron darkens the beer and gives metallic notes, and both metals can harm the yeast.
The classic brewing waters of the world differ exactly in these minerals, and that is why the same recipe brewed in two towns once gave two different beers. Modern brewers measure their water, adjust it with salts or by treatment, and brew the same beer anywhere.
Three drinks, three waters
Remove almost all minerals: clean, soft, neutral.
Keep and adjust calcium, sulphate, and chloride to style.
Soft, clean, no iron, no clouding.
Figure 7.1: Three drinks, three waters. The soft drink wants minerals gone, the beer wants them adjusted to style, and the spirit wants them gone so the drink stays bright. Drawn from the water-treatment chapter in Shachman, The Soft Drinks Companion (2005), and the brewing material in Hui and others (2004).
Quick check
A brewer wants a bitter, hoppy beer. Which water mineral helps, and which one would they keep low?
Check your answer
Sulphate sharpens hop bitterness, so it helps. Alkalinity raises mash pH and dulls the beer, so it is kept low, especially for pale beers.
7.5 Water for spirits and for dilution
A spirit leaves the still strong, and it is brought down to drinking strength with water, commonly to near 40% alcohol by volume. That dilution water must be soft, clean, and free of iron and dissolved salts, because the faults it causes are visible at once:
- Clouding. Dissolved salts and flavour oils can come out of solution when the spirit is diluted, turning the drink hazy. Soft water keeps the drink bright.
- Darkening. Iron gives a dark tint and a metallic note, and even a trace is enough to spoil a clear spirit.
- Off-flavours. Any taste or odour in the water becomes part of the drink, and a spirit has nowhere to hide it.
The same water is used to make the spirit in the first place: the fermentation water must be clean and free of microbes that would compete with the yeast, and the mashing water must suit the enzymes. The rule for spirits is simple: the water must be as clean as the spirit it is joining.
Quick check
Why must dilution water for a spirit be soft and free of iron?
Check your answer
Salts can cloud the drink on dilution, and iron darkens it and gives a metallic note, and a clear spirit has nowhere to hide either fault.
7.6 Water for wine and for fermented cereal drinks
Wine needs water only in small amounts: the grape brings its own juice, and water is used for cleaning, for diluting cleaning chemicals, and sometimes for adjusting the must. The requirement is cleanliness and freedom from off-flavours, because any taint in the wash water can reach the wine.
Fermented cereal drinks such as jaanr use water at two points: cooking the grain, and the fermentation itself. The water must be clean and microbiologically sound, because the fermentation is open and mixed, and unwanted microbes in the water can join the fermentation and change the drink. The books used here give no separate water specification for jaanr, and this unit does not invent one: the general rule, clean water, free of off-flavours and harmful microbes, is what the sources support.
Quick check
Where does water enter wine making, if the grape brings its own juice?
Check your answer
Mainly in cleaning and in diluting cleaning chemicals, and sometimes in adjusting the must, so it must be clean and free of taints that could reach the wine.
7.7 Water for mineral water, tonic water, and fruit drinks
- Mineral water. The water is the product, and its mineral content is its identity. The requirement is not to remove the minerals but to protect them: the source must be clean, the bottling must be hygienic, and the mineral character must stay as it is. Quality control checks the microbes, the chemistry, and the clarity.
- Tonic water. A carbonated soft drink flavoured with quinine, which gives its bitter note. The water must meet the same clean, soft standard as any soft drink, because the bitter flavour is delicate and any fault in the water shows through it.
- Fruit drinks and cordials. The water dilutes the juice or the concentrate, so it must be clean, soft, and free of off-flavours, and it must not react with the fruit acids. The fruit brings its own character, and the water must not add one of its own.
Quick check
Why is the water requirement for mineral water different from that for a soft drink?
Check your answer
For mineral water the minerals are the product and must be protected as they are. For a soft drink the minerals are removed so the added flavour stands alone.
7.8 Water for fermentation: what the yeast needs
Before water becomes a drink, it is often the yeast's home, and the yeast is a fussy tenant. Fermentation water must be clean and free of harmful microbes that would compete with the yeast, and it must carry the nutrients the yeast needs in small amounts: minerals such as calcium, magnesium, and zinc, which the yeast uses to build cells and run its enzymes. A water that is too pure can starve the yeast, while a water that carries chlorine or other disinfectant residues can slow it down or stop it. That is why a brewery or distillery that disinfects its water with chlorine often removes the residual before the water meets the yeast, and why a fermentation that stalls for no visible reason is sometimes a water problem in disguise.
The temperature of the water matters too: the mash and the fermentation are both temperature-controlled steps, and the water is the main way heat is carried in or out. A brewer who pitches yeast into wort that is too warm loses the yeast to heat stress, and a distiller who ferments too warm loses alcohol to evaporation and gains unwanted higher alcohols. Water is therefore not just an ingredient in fermentation: it is the medium, the nutrient carrier, and the temperature control, all at once.
Quick check
Why might a fermentation stall even when the sugar, the yeast, and the temperature all look right?
Check your answer
The water may be at fault: disinfectant residues can slow or stop the yeast, or the water may lack the trace minerals the yeast needs to grow.
7.9 How much water, and how it is checked
The amount of water is easy to state: it is most of the drink. The checking is where the work lies, and the routine checks are the same across drinks, with different limits:
- Clarity and turbidity. The water must be clear, measured by eye and by turbidity meter.
- Taste and odour. Tested by a trained taster, because instruments miss the faint notes a drinker catches.
- Hardness and alkalinity. Measured by titration, and adjusted to the drink's specification.
- Iron and manganese. Measured and kept to trace levels, because both stain and flavour the drink.
- Microbial count. Tested by plating, and the water must be effectively free of spoilage and harmful microbes.
- pH. Measured and held in the range the drink needs.
A water that passes every check is released for use. A water that fails one check is treated again or rejected. The record is kept, because the water record is the first document an investigator asks for when a drink goes wrong.
🤔 Pause and think: a soft-drink plant and a brewery sit side by side and share one water source. Can they share one treatment plant? What would each one need to add or remove after the shared steps?
Quick check
Name four routine checks on beverage water.
Check your answer
Clarity and turbidity, taste and odour, hardness and alkalinity, iron and manganese, microbial count, and pH. Any four count.
7.10 Worked example: reading a water report
A water report is a list of numbers, and the skill is reading it drink by drink. Take this illustrative report for one source, with values chosen to show the reasoning, not as a standard for any water:
An illustrative water report
Calcium: 80 mg per litre
Good for brewing: it helps mash enzymes and yeast settling.
Sulphate: 120 mg per litre, chloride: 40 mg per litre
A sulphate to chloride ratio of 3 to 1, which sharpens hop bitterness and suits a bitter beer.
Alkalinity: high, from bicarbonate
A problem for a pale beer, because it raises mash pH, so the brewer treats it down.
Iron: 0.3 mg per litre
High enough to darken a clear spirit and give a metallic note, so the water is not fit for dilution as it is.
Microbial count: low, chlorine residual present
Safe to store, but the chlorine must be removed before the water meets yeast, or the fermentation stalls.
Now read the verdicts. For a bitter pale ale, this water is close: the sulphate suits the style, but the alkalinity must come down first. For a soft drink, it is not fit as it is: the minerals must be removed, not adjusted. For diluting a spirit, it fails on iron alone. One report, three different answers, and the drink decides which one applies. That is why a plant keeps a water report for each drink, not one report for the whole factory.
Quick check
A water report shows sulphate at 120 mg per litre and chloride at 40 mg per litre. Which beer style does that ratio suit, and why?
Check your answer
A bitter, hoppy beer: sulphate sharpens hop bitterness, and a sulphate to chloride ratio near 3 to 1 pushes the balance toward bitter rather than soft and malty.
7.11 Check yourself
Think about it first: a brewery's beer turns out darker and harsher than usual, and the only change is a new water source. Which mineral would you test first, and what would you expect to find?
- Why does a soft drink need soft, low-salt water while a beer needs its minerals adjusted, not removed?
Check your answer
A soft drink's flavour is added, so minerals compete with it and disturb carbonation. A beer's minerals are part of the recipe and shape bitterness, fullness, and mash performance.
- Which mineral sharpens hop bitterness, and which rounds and softens flavour?
Check your answer
Sulphate sharpens hop bitterness. Chloride rounds and softens flavour.
- What are the four kinds of problems raw water can carry?
Check your answer
Suspended matter, chemical composition, microorganisms, and variation over time.
- Why is iron unwanted in brewing and spirit water?
Check your answer
Iron darkens the drink, gives metallic notes, and can harm yeast.
- A water report shows high alkalinity and a chlorine residual. A brewer wants to use it for a pale ale. What two treatments must happen first?
Check your answer
Reduce the alkalinity so the mash pH stays low enough for a pale beer, and remove the chlorine residual before the water meets the yeast.
Try it yourself: Taste your own tap water, then taste a bottled still water, and write down three words for each. Then read the label of a soft drink and a beer and note whether either mentions water. Write one sentence saying why the water is named or not named on each label, and what that tells you about which ingredient the maker wants you to notice.
Key ideas to carry forward
- Water is the largest ingredient in most drinks, and it is specified like any raw material.
- Raw water can carry suspended matter, dissolved chemicals, microbes, and variation, and the multiple-barrier idea guards against all four.
- Soft drinks need water that disappears: clear, soft, low in salts, and microbiologically clean.
- Beer needs its minerals adjusted to style: calcium for the mash and yeast, sulphate for bitterness, chloride for fullness, low alkalinity for pale beers.
- Spirit dilution water must be soft and iron-free, or the drink clouds and darkens.
- Mineral water keeps its minerals as its identity, while tonic water and fruit drinks need the clean soft-drink standard.
- Routine checks cover clarity, taste, odour, hardness, alkalinity, iron, manganese, microbes, and pH.
- One water report gives three different answers: the sulphate to chloride ratio steers a beer toward bitter or malty, and iron alone can fail a water for spirit dilution.
Glossary
Multiple barrier concept
Using several treatment steps in a row, each removing a different problem, so no single step is trusted alone. Food tech example: filtration, then softening, then disinfection guarding soft-drink water.
Hardness
The level of dissolved calcium and magnesium salts in water. Food tech example: hard water that can haze a soft drink or dull a beer.
Alkalinity
The water's ability to resist acid, mostly from bicarbonate. Food tech example: high alkalinity raising mash pH and darkening a pale beer.
Turbidity
Cloudiness from suspended particles in water. Food tech example: turbidity measured before water is released for beverage use.
Sulphate
A dissolved salt that sharpens hop bitterness in beer. Food tech example: sulphate-rich water suiting a bitter, hoppy beer.
Chloride
A dissolved salt that rounds and softens beer flavour. Food tech example: chloride-rich water suiting a malty, full beer.
Demineralised water
Water with its dissolved salts removed. Food tech example: demineralised water used to dilute a spirit without clouding it.
Must
The crushed fruit juice before or during wine fermentation. Food tech example: water sometimes used to adjust a must.
Quinine
The bitter flavouring in tonic water. Food tech example: quinine giving tonic water its bitter note.
Sulphate to chloride ratio
The balance of sulphate against chloride in brewing water, which steers a beer toward bitter and dry or toward soft and malty. Food tech example: a ratio near 3 to 1 suiting a bitter, hoppy beer.
Microbial count
The number of microbes in a water sample, measured by plating. Food tech example: the count that decides whether water is released for use.
References
- Shachman, M. The Soft Drinks Companion: A Technical Handbook for the Beverage Industry. CRC Press, 2005.
- Hui, Y. H., Meunier-Goddik, L., Hansen, A. S., Josephsen, J., Nip, W. K., Stanfield, P. S., and Toldra, F. (editors). Handbook of Food and Beverage Fermentation Technology. Marcel Dekker, 2004.
- Rose, A. H. (editor). Yeasts in Food and Beverages. Springer, 2006.
Unit 8: Processed Water Preparation
Note
Unit 8: Processed Water Preparation
The water that fills a bottle of mineral water looks like the water that came out of the ground, and that is the point. But between the ground and the bottle it has passed through filters, past ultraviolet light, past ozone, and past a laboratory bench. What does each step remove, and why does the order matter? This unit walks the treatment plant in order.
8.1 The multiple barrier idea
No single treatment step is trusted alone. The plant uses the multiple barrier concept: several steps in a row, each removing a different problem, so that if one step weakens, the next one still protects the water. A filter removes particles but not dissolved salts. A softener removes hardness but not microbes. A disinfectant kills microbes but does not remove particles. Together, they cover each other's gaps.
The usual order is: remove the big particles first, then the fine ones, then the dissolved salts, then disinfect, and finally polish and store. Reversing the order wastes effort: disinfecting muddy water is useless, because the particles shield the microbes from the disinfectant, and filtering after disinfection can reintroduce contamination. Order is part of the treatment.
The multiple barrier line, in order
Big particles out.
↓
Fine particles out.
↓
Dissolved salts reduced.
↓
Chlorine, ozone, or UV light.
↓
Figure 8.1: The multiple barrier line, in order. Each box covers a gap the others leave. Drawn from the water-treatment chapter in Shachman, The Soft Drinks Companion (2005).
Quick check
Why does a treatment plant use several steps in a row instead of one strong step?
Check your answer
No single step removes every problem, so several barriers cover each other's gaps: filters remove particles, softeners remove salts, and disinfectants kill microbes.
8.2 Coagulation, flocculation, and filtration
The first job is to clear the water. Coagulation adds a chemical that makes tiny suspended particles clump together, and flocculation stirs the water gently so the clumps grow into visible flakes, called floc. The floc is heavy enough to settle or to be caught on a filter. The treatment can run as a batch system, where a tank is dosed, settled, and drained, or as an in-line system, where the chemical is dosed into the flowing water and the floc is filtered out downstream.
After that comes filtration through sand or other media, which catches the remaining fine particles. The filtered water should be bright and clear, and its turbidity is measured before it moves on. Clear water is not just about looks: it is the condition that lets the later steps work, because particles shield microbes from disinfectants and clog fine filters.
Quick check
What do coagulation and flocculation do, and why do they come before disinfection?
Check your answer
They make tiny particles clump into flakes that settle or filter out. They come first because particles shield microbes from disinfectants and clog fine filters.
8.3 Membrane filtration and alkalinity reduction
The next barrier removes dissolved material, and membranes do the fine work. The main membrane methods are:
- Reverse osmosis. Water is pushed at high pressure against a membrane that lets water through and holds dissolved salts back. It gives very pure water, and it is the standard way to make soft-drink water from a hard source.
- Nanofiltration. A looser membrane that removes hardness and larger dissolved molecules while letting some salts through. It softens the water without stripping it completely.
- Ultrafiltration. A membrane with larger pores that removes particles, colloids, and microbes, but lets dissolved salts pass. It is a polishing and microbial barrier.
Alkalinity reduction deals with bicarbonate, which raises the pH and can dull a drink. Two methods are used: hydrated lime treatment, which precipitates the bicarbonate out, and ion exchange, which swaps the unwanted ions for harmless ones. The choice depends on the source water and on the drink: a soft-drink plant usually wants the alkalinity down, while a mineral-water plant leaves its water alone.
Quick check
What is the difference between reverse osmosis and ultrafiltration?
Check your answer
Reverse osmosis holds dissolved salts back and gives very pure water. Ultrafiltration removes particles and microbes but lets dissolved salts pass.
8.4 UV treatment: light that stops microbes
Ultraviolet (UV) treatment passes the water past lamps that give out UV light, most effectively near 254 nanometres. The light damages the genetic material of bacteria, yeasts, and moulds, so they cannot multiply. The water is unchanged in taste, odour, and chemistry: nothing is added, and nothing is left behind.
UV has two conditions that must be met. First, the water must be clear: particles shield microbes from the light, so UV always comes after filtration. Second, the dose must be enough: the flow rate, the lamp strength, and the exposure time are set so that every part of the water receives the treatment. UV leaves no residual protection, so the treated water must be stored and bottled hygienically, or a later step must guard it.
Quick check
Why must UV treatment come after filtration, and what does it leave behind in the water?
Check your answer
Particles shield microbes from the light, so the water must be clear first. UV leaves nothing behind: no chemical, no taste, and no residual protection.
8.5 Micron filter: the final polish
A micron filter is a fine filter with pores measured in micrometres, and it is the final polish before bottling. Common ratings are around 0.2 micrometres for a microbial barrier, fine enough to trap bacteria, and coarser ratings for particle polishing. The filter sits at the end of the line, after disinfection, and its job is to catch anything that slipped through, including any particles shed by the earlier steps.
The filter is checked by pressure: as it loads up, the pressure across it rises, and a rising pressure is the signal to change it. A filter that is left too long becomes a source of contamination itself, so the change schedule is written down and followed.
🤔 Pause and think: UV leaves no residual protection, and a micron filter traps microbes but does not kill them. What happens to the trapped microbes if the filter is left in place for weeks? What does that say about the change schedule?
Quick check
Where does the micron filter sit in the treatment line, and what does its rising pressure mean?
Check your answer
At the end, after disinfection, as a final polish. Rising pressure means it is loading up and needs changing.
8.6 Ozone treatment: a strong disinfectant that disappears
Ozone (O₃) is the three-atom form of oxygen, a pungent gas and a powerful disinfectant. It is made on site by passing air or oxygen through an electric discharge, and it is bubbled through the water. It kills bacteria, yeasts, and moulds quickly, and it also oxidises iron, manganese, and some taste and odour compounds, which improves the water in two ways at once.
Ozone's great strength is also its limit: it is unstable and breaks down to ordinary oxygen, so it leaves no residual protection in the bottled water. That is an advantage for taste, because there is no chemical left to flavour the drink, and a limit for storage, because the water must be bottled hygienically and kept clean after treatment. Ozone is compared with chlorine in the books: chlorine leaves a residual that protects the water in storage but can flavour it, while ozone leaves no residual and no taste, but protects only at the moment of treatment.
Quick check
What is ozone's main strength and its main limit as a water disinfectant?
Check your answer
Strength: it kills microbes quickly and oxidises iron and taste compounds, then breaks down to oxygen. Limit: it leaves no residual protection, so the water must be bottled hygienically.
8.7 The bottling plant
The bottling plant is where the treated water becomes a product, and hygiene is the whole job. The usual line is:
- Bottle washing and rinsing. Bottles are washed, rinsed with treated water, and checked for cleanliness and for damage.
- Filling. The water is filled into the bottles, usually with the filler kept clean and the fill level checked. For carbonated waters, the carbon dioxide is added at this stage.
- Capping. Caps are applied at once, and the seal is checked: a poor seal lets air and microbes in and lets carbonation out.
- Labelling and coding. The label and the date or batch code are applied, so the bottle can be traced.
- Inspection and packing. Filled bottles are inspected for fill level, clarity, and seal, and then packed for dispatch.
The plant's air, its surfaces, and its workers' hands are all part of the hygiene system. A clean water filled into a dirty bottle is a dirty product.
Quick check
Name the five steps of the bottling line in order.
Check your answer
Bottle washing and rinsing, filling, capping, labelling and coding, and inspection and packing.
8.8 Quality control in mineral water, natural water, and tonic water production
Quality control runs at three points: the source, the treatment line, and the finished bottle.
- Mineral water. The source is tested regularly for microbes and chemistry, the treatment is checked to confirm it has not changed the mineral character, and the finished bottles are tested for clarity, microbes, and mineral content. The mineral profile is the product's identity, so any change is investigated.
- Natural water. The same checks apply, with the emphasis on protecting the source: the water is bottled as it is, with only the treatment needed for safety, and the checks prove that nothing has been added or removed that should not have been.
- Tonic water. As a carbonated soft drink, tonic water is checked like any soft drink: water quality, sugar or sweetener level by Brix, carbonation by gas volumes, clarity, and microbial safety, plus a taste check for the bitter quinine note. The carbonation target in the books is given as an example specification of 4.00 plus or minus 0.20 gas volumes, and the plant measures it on every run.
The shared record is the batch sheet: source tests, treatment checks, fill checks, and finished-product tests, all in one place, so that any bottle can be traced back to its water.
Quality control at four points, from source to batch sheet
Microbes, chemistry.
↓
Each barrier working.
↓
Level, seal, clarity.
↓
Microbes, chemistry, carbonation, taste.
↓
Trace every bottle.
Figure 8.2: Quality control at four points, from source to batch sheet. Drawn from the quality-control practice described in Shachman, The Soft Drinks Companion (2005).
Quick check
Why is the batch sheet kept, and what does it hold?
Check your answer
So any bottle can be traced back to its source and treatment. It holds the source tests, treatment checks, fill checks, and finished-product tests.
8.9 Storage and distribution of treated water
Treatment is wasted if the water is spoiled on its way to the bottle. Treated water is stored in clean, covered tanks, and the tanks are cleaned and disinfected on a schedule, not when someone remembers. The distribution pipes are kept clean, with no dead legs where water can sit still and grow microbes, and the whole system is designed so water keeps moving. Where the water must be held, the hold time is kept short, and the temperature is kept cool, because warm, still water is the condition microbes like best.
The final guard is a last check before filling: clarity, taste, odour, and a microbial test on the water as it leaves the tank. A plant that tests only at the treatment outlet and never at the filler is testing the wrong point, because the journey between the two is where contamination happens.
Quick check
Why is a dead leg in a water pipe a problem?
Check your answer
Water sits still in it, warms up, and grows microbes, which then wash into the main flow.
8.10 Fault finding on the treatment line
When a finished bottle fails, the fault is found by walking the line backwards, barrier by barrier. The four faults below are the ones a student meets first, and each one points to a different box in Figure 8.1.
Cloudy water after treatment
What you see: haze in the finished bottle. Likely cause: the coagulation dose or the filter is failing, and fine particles are passing through. Check first: turbidity after filtration, and the pressure across the filter.
Microbes in the finished bottle, lamps and ozone correct
What you see: a failed plate count with the disinfectants in order. Likely cause: a micron filter left in place too long, growing microbes on its trapped load, or a dead leg in the pipework. Check first: the filter change record and the pipe layout.
Ozone smell in the finished water
What you see: a sharp, pungent note at the filler. Likely cause: the ozone dose is too high for the flow, or the contact time is too long, so ozone survives to the bottle instead of breaking down to oxygen. Check first: dose against flow rate, and the holding time before filling.
Flat taste and a high microbial count after storage
What you see: water that was clean at treatment and spoiled in the tank. Likely cause: a storage tank held too long, too warm, or cleaned off schedule. Check first: tank hold time, tank temperature, and the cleaning log.
The working rule is to test at the point of failure, not at the point of comfort: a plant that tests only at the treatment outlet and never at the filler, as section 8.9 warns, will keep passing its own test while its bottles keep failing.
Quick check
Finished bottles fail the microbial test but the UV lamps are new. Which two places do you check first?
Check your answer
The micron filter change record, because a loaded filter can become a source of microbes, and the pipework for dead legs where still water grows microbes.
8.11 Practical note: physical, chemical, and microbiological analysis of mineral water
The laboratory practical for this subject asks for physical, chemical, and microbiological analysis of mineral water. At the bench, the physical checks are clarity, colour, odour, and taste. The chemical checks are pH, hardness, alkalinity, and dissolved salts. The microbiological checks are a plate count and a test for indicator organisms, which show whether the water has been contaminated. Each result is compared with the specification for that water, and the three groups together give the full picture: a water can pass the chemical tests and still fail the microbial one, so all three are needed.
Quick check
Why are physical, chemical, and microbiological tests all needed for a mineral water?
Check your answer
Each group catches a different fault: a water can pass the chemical tests and still fail the microbial one, so all three together give the full picture.
8.12 Check yourself
Think about it first: a plant's finished bottles keep failing the microbial test, but the UV lamps are new and the ozone dose is correct. The fault is found in a filter that has not been changed for a month. How could a filter meant to protect the water become the source of the fault?
- What is the multiple barrier concept, and why does order matter?
Check your answer
Several treatment steps in a row, each removing a different problem. Order matters because particles shield microbes from disinfectants, so clearing comes before disinfection.
- What is the difference between ozone and chlorine as disinfectants?
Check your answer
Ozone kills quickly, oxidises iron and taste compounds, and breaks down to oxygen, leaving no residual or taste. Chlorine leaves a residual that protects in storage but can flavour the water.
- What does UV treatment do, and what two conditions must be met?
Check your answer
UV light damages the genetic material of microbes so they cannot multiply. The water must be clear first, and the dose, flow, lamp strength, and exposure time must be enough.
- What is a micron filter, and where does it sit in the line?
Check your answer
A fine filter with pores measured in micrometres, often around 0.2 micrometres for a microbial barrier. It sits at the end, after disinfection, as a final polish before bottling.
- Finished water smells of ozone at the filler. What is the most likely cause, and what do you check first?
Check your answer
The ozone dose is too high for the flow, or the contact time is too long, so ozone survives to the bottle. Check the dose against the flow rate and the holding time before filling.
Try it yourself: Draw the treatment line for a bottling plant from memory, with five boxes in order, and label each box with the problem it removes. Then check it against Figure 8.1 and mark every box you put in the wrong order. The boxes you swapped are the ones to re-read: order is part of the treatment.
Key ideas to carry forward
- The multiple barrier concept uses several steps in a row, each removing a different problem, and the order matters.
- Coagulation and flocculation clump fine particles so they settle or filter out, and filtration clears the water for the later steps.
- Membrane methods are reverse osmosis for dissolved salts, nanofiltration for softening, and ultrafiltration for particles and microbes.
- UV light damages microbial genetic material near 254 nanometres, adds nothing, and leaves no residual protection.
- The micron filter is the final polish, often rated near 0.2 micrometres, and rising pressure signals a change.
- Ozone is a powerful disinfectant that breaks down to oxygen, leaving no taste and no residual.
- The bottling line is wash, fill, cap, label, and inspect, and hygiene is the whole job.
- Quality control tests the source, the treatment, the filling, and the finished bottle, and the batch sheet traces every bottle.
- Fault finding walks the line backwards: cloud points to filtration, microbes with good disinfection point to the filter record and dead legs, and an ozone smell points to dose against flow.
Glossary
Multiple barrier concept
Several treatment steps in a row, each removing a different problem, so no single step is trusted alone. Food tech example: filtration, softening, and disinfection guarding bottled water.
Coagulation
Adding a chemical that makes tiny suspended particles clump together. Food tech example: coagulation before filtration in a water plant.
Flocculation
Gentle stirring so the clumps grow into flakes, called floc, that settle or filter out. Food tech example: floc forming after coagulation in a settling tank.
Reverse osmosis
Pushing water at high pressure against a membrane that lets water through and holds dissolved salts back. Food tech example: making soft-drink water from a hard source.
Nanofiltration
Membrane filtration that removes hardness and larger dissolved molecules while letting some salts through. Food tech example: softening water without stripping it completely.
Ultrafiltration
Membrane filtration that removes particles and microbes but lets dissolved salts pass. Food tech example: polishing water as a microbial barrier.
UV treatment
Passing water past ultraviolet lamps that damage microbial genetic material. Food tech example: UV lamps near 254 nanometres disinfecting clear water.
Micron filter
A fine filter with pores measured in micrometres, used as a final polish. Food tech example: a 0.2 micrometre filter trapping bacteria before bottling.
Ozone
O₃, the three-atom form of oxygen, a powerful disinfectant made on site. Food tech example: ozone bubbled through water, then breaking down to oxygen.
Dead leg
A branch of pipe where water sits still instead of flowing, warming up and growing microbes. Food tech example: a dead leg in a water line that spoils treated water on its way to the filler.
Gas volumes
The measure of carbonation: volumes of carbon dioxide dissolved per volume of drink. Food tech example: a tonic water specified at 4.00 plus or minus 0.20 gas volumes.
References
- Shachman, M. The Soft Drinks Companion: A Technical Handbook for the Beverage Industry. CRC Press, 2005.
- Hui, Y. H., Meunier-Goddik, L., Hansen, A. S., Josephsen, J., Nip, W. K., Stanfield, P. S., and Toldra, F. (editors). Handbook of Food and Beverage Fermentation Technology. Marcel Dekker, 2004.
Unit 9: Cocoa Beverage
Note
Unit 9: Cocoa Beverage
A cup of hot cocoa is warm, brown, sweet, and comforting, and it is also a small piece of food technology. The bean was fermented, dried, roasted, ground, pressed, and milled before it ever met hot milk, and each of those steps decided the flavour in the cup. What does each step do, and what is actually in the powder? This unit follows the bean to the cup.
9.1 Definition: what a cocoa beverage is
A cocoa beverage is a drink made from cocoa powder, the solid left after cocoa butter is pressed out of ground cocoa beans, mixed with a liquid, usually milk or water, and usually sweetened. It is a non-alcoholic beverage, and it is served hot or cold. The familiar forms are hot cocoa, chocolate milk, and ready-to-drink cocoa beverages in cartons and bottles.
The definition matters because it separates the cocoa beverage from its neighbours. It is not chocolate, which keeps the cocoa butter and sets solid. It is not a chocolate-flavoured soft drink, which uses flavouring rather than cocoa powder. And it is not a coffee or tea drink, which takes its character from different plants. The cocoa beverage's character comes from the cocoa powder itself: its flavour, its colour, its bitterness, and its stimulants.
🤔 Pause and think: a cocoa beverage and a bar of chocolate start from the same bean. At which step do their paths split, and what does each path keep that the other loses?
Quick check
What is a cocoa beverage, and how does it differ from a bar of chocolate?
Check your answer
A drink made from cocoa powder mixed with milk or water and usually sweetened. Chocolate keeps the cocoa butter and sets solid, while the beverage uses the powder left after the butter is pressed out.
9.2 The bean: fermentation and drying
The story starts in the pod. Cocoa beans grow inside large pods, wrapped in a sweet pulp, and the first step is fermentation. The beans and pulp are heaped or boxed and left for several days, and the microbes naturally present, yeasts, lactic acid bacteria, and acetic acid bacteria, ferment the pulp sugars. The temperature rises, the pulp breaks down, and inside the bean, chemical changes begin that build the flavour precursors: the compounds that will become chocolate flavour only later, in the roast.
After fermentation the beans are dried, usually in the sun, until they are hard and stable enough to store and ship. Drying stops the fermentation and prevents mould. A bean that is fermented too briefly tastes harsh and astringent. A bean that is dried too slowly can grow mould and pick up off-flavours. The maker's skill at this stage decides the ceiling of the final flavour: no later step can put good flavour into a badly fermented bean.
Quick check
What does fermentation do to a cocoa bean, and what happens if it is too brief?
Check your answer
Microbes ferment the pulp sugars, the temperature rises, and flavour precursors build inside the bean. Too brief a fermentation leaves the bean harsh and astringent.
9.3 Roasting, winnowing, and grinding
The dried beans travel to the factory, where three steps turn them into a paste:
- Cleaning and roasting. The beans are cleaned of stones, twigs, and broken pieces, then roasted. Roasting develops the flavour: the precursors built during fermentation turn into the rich, roasted notes of cocoa, the moisture falls, and the shell loosens from the bean inside. The roast is controlled carefully, because too light a roast leaves the flavour thin, and too dark a roast burns it.
- Winnowing. The roasted beans are cracked and the shell is blown away, leaving the nib, the meaty inside of the bean. The nib is the useful part, and the shell is a by-product.
- Grinding. The nibs are ground, and the friction warms them until the fat inside melts. The ground mass becomes a thick, flowing liquid called cocoa liquor or cocoa mass. It is not alcoholic: liquor here means a liquid, not a drink.
Cocoa liquor is about half fat and half solid, by rough measure: the fat is cocoa butter, and the solids are the cocoa material that gives flavour and colour. That split decides everything that follows: keep the fat and you have chocolate, press it out and you have cocoa powder.
From pod to cocoa liquor
↓
Microbes work on the pulp, flavour starts.
↓
Sun-dry until hard and stable.
↓
Flavour develops, shell loosens.
↓
Shell blown away, nib kept.
↓
Nibs become cocoa liquor.
Figure 9.1: From pod to cocoa liquor. Fermentation builds the flavour precursors, roasting develops them, and grinding melts the fat. Drawn from the general cocoa processing descriptions in the beverage technology books used for this unit.
Quick check
What is cocoa liquor, and what is it made of?
Check your answer
The thick liquid from grinding roasted cocoa nibs. It is about half cocoa butter (fat) and half cocoa solids, which give flavour and colour.
9.4 Pressing and milling: making the powder
Cocoa liquor goes into a press, and the press squeezes out much of the cocoa butter. What is left is a hard cake, the press cake, and that cake is milled into cocoa powder. The fat content of the powder depends on how much butter was pressed out: a powder pressed hard holds less fat, and a powder pressed lightly holds more. That fat level matters in the cup, because fat carries flavour and gives body, while a low-fat powder dissolves more easily and gives a lighter drink.
Before or after pressing, the cocoa may be alkalised, also called Dutching. The cocoa is treated with an alkali, usually potassium carbonate, which darkens the colour, softens the bitter and acidic notes, and helps the powder mix into liquid. Alkalised cocoa is darker and smoother, and it is the usual choice for a cocoa beverage. Natural, non-alkalised cocoa is lighter in colour and sharper in taste, and it suits baking more than drinking.
The powder is then milled to a fine, even size. Fine powder mixes smoothly and stays suspended in the drink. Coarse powder sinks, feels gritty, and leaves sediment at the bottom of the cup.
Quick check
What is Dutching, and what does it change in cocoa powder?
Check your answer
Treating cocoa with an alkali, usually potassium carbonate. It darkens the colour, softens bitter and acidic notes, and helps the powder mix into liquid.
9.5 Composition: what is in cocoa
Cocoa powder is a complex food, and its composition explains its behaviour in a drink:
- Fat. Cocoa butter, the part that was not pressed out. It carries flavour and gives body and smoothness.
- Protein. Cocoa solids carry protein, which adds nutrition and helps the powder behave in milk.
- Starch and fibre. The solid structure of the bean, which gives body but does not dissolve, so it must be kept suspended in the drink.
- Minerals. Cocoa is a source of minerals, including magnesium, iron, and potassium, which are part of its nutritional interest.
- Flavour compounds. Hundreds of compounds built during fermentation and roasting, giving the roasted, chocolate character.
- Stimulants. Cocoa carries three natural stimulants: caffeine, theobromine, and theophylline in small amounts. Theobromine is the main one in cocoa, and it is milder and longer-lasting than caffeine. The stimulant level in a cup of cocoa is far below that in a cup of coffee, which is why cocoa is served to children as well as adults.
A finished cocoa beverage adds milk or water, sweetener, and sometimes a stabiliser to keep the powder suspended, and sometimes added vitamins or minerals in fortified products. The powder is the flavour, and the rest is the carrier.
🤔 Pause and think: cocoa powder does not dissolve, it suspends. What happens to a cocoa drink left standing for ten minutes, and what does that tell you about why stabilisers and stirring matter?
Quick check
Name the three natural stimulants in cocoa, and which one is the main one.
Check your answer
Caffeine, theobromine, and theophylline in small amounts. Theobromine is the main one in cocoa.
9.6 Production technology: from powder to bottled drink
Making a cocoa beverage at factory scale follows a clear line:
- Mix. Cocoa powder, sweetener, and stabiliser are mixed into milk or water. The mixing must be thorough, because dry powder clumps when it meets liquid, and a clump that forms early is hard to break later.
- Heat. The mix is heated to dissolve the sweetener, hydrate the stabiliser, and pasteurise the drink. The heating also helps the cocoa flavour open up.
- Homogenise. The hot mix is forced through a small gap at high pressure, which breaks the fat into tiny droplets and spreads the cocoa evenly. Homogenisation keeps the drink smooth and stops the fat from rising.
- Cool and fill. The drink is cooled and filled into cartons or bottles, and the fill is checked for level and seal.
- Chill and store. Ready-to-drink cocoa beverages are kept cold, and the shelf life depends on the heat treatment and the hygiene of the line.
For a hot cocoa powder sold in a packet, the line is shorter: the powder, sweetener, and sometimes dried milk are blended dry, packed, and the drinker adds hot milk or water at home. The factory's job in that case is the blend: even, free-flowing, and lump-free.
The cocoa beverage line, from powder to bottled drink
↓
↓
↓
↓
Figure 9.2: The cocoa beverage line, from powder to bottled drink. Drawn from the beverage production practice described in Paquin, Functional and Speciality Beverage Technology (2009), and Shachman, The Soft Drinks Companion (2005).
Quick check
Why is a cocoa beverage homogenised?
Check your answer
Homogenisation breaks the fat into tiny droplets and spreads the cocoa evenly, keeping the drink smooth and stopping the fat from rising.
9.7 Quality attributes and faults
A good cocoa beverage is judged on:
- Flavour. Rich, roasted cocoa, balanced sweetness, no bitterness that overwhelms, and no stale or rancid notes.
- Colour. Even and appetising, dark for an alkalised cocoa, lighter for a natural one, with no grey or dull tone.
- Texture. Smooth, with no grit and no sediment at the bottom of the cup. The powder should stay suspended long enough to finish the drink.
- Stability. No separation of fat, no settling that cannot be stirred back, and no spoilage within the shelf life.
The common faults trace to the same causes as other drinks: poor powder, poor mixing, and poor storage. Grit comes from coarse powder or poor milling. Sediment comes from no stabiliser or from a drink left standing too long. Rancid notes come from fat that has oxidised in warm or long storage. A flat, dull flavour comes from a poor bean or a poor roast, and no later step can fix it.
Quick check
Your cocoa drink leaves grit on the tongue and sediment at the bottom. What is the most likely cause?
Check your answer
Coarse powder or poor milling, and a powder that does not stay suspended, often because the mixing or the stabiliser is wrong.
9.8 Cocoa beverage variations: hot, cold, and ready to drink
The same cocoa powder gives three different drinks, and the differences are in the carrier and the serving temperature, not in the bean:
- Hot cocoa. Cocoa powder, sweetener, and hot milk or water, stirred well and served at once. The heat opens the flavour and helps the powder suspend, and the milk adds body and softness.
- Chocolate milk. Cocoa, sweetener, and cold milk, mixed, heated for safety, homogenised, cooled, and bottled. It is a ready-to-drink product with a chilled shelf life, and its smoothness depends on the homogenisation and the stabiliser.
- Ready-to-drink cocoa beverages. Factory-made drinks in cartons or bottles, sometimes fortified with added vitamins or minerals. Their quality points are the same as any bottled drink: flavour, colour, stability, and microbial safety, plus a shelf life that depends on the heat treatment and the hygiene of the line.
A fourth form, the dry cocoa mix in a packet, is not a drink until the buyer adds liquid, but the factory's job is the same: an even blend that mixes without clumps. In every form, the test is the cup: smooth, rich, and free of grit.
Quick check
What decides whether a cocoa drink is a hot cocoa, a chocolate milk, or a ready-to-drink beverage?
Check your answer
The carrier and the serving temperature, and whether it is made fresh or factory-filled and chilled: the cocoa powder is the same in each.
9.9 Worked example: a 100 litre chocolate milk batch
Turn section 9.6 into numbers with an illustrative batch, stated as a teaching example, not as a standard recipe for any product. The batch makes about 100 litres of chocolate milk.
- Milk. Start with 100 litres of milk, about 103 kg, as the carrier.
- Cocoa powder. Add 2 kg of alkalised cocoa powder, about 2% of the milk by mass, for a rich colour and flavour without grit.
- Sugar. Add 8 kg of sugar, about 7% of the finished batch by mass, to balance the bitterness of the cocoa.
- Stabiliser. Add about 0.15 kg of stabiliser, a small dose that keeps the cocoa suspended instead of settling to the bottom.
- Mix, heat, homogenise. Mix the dry powders into a little warm milk first, so no clumps form, then blend into the rest, heat to pasteurise, and homogenise to break the fat fine.
- Check. Measure the Brix, taste for balance, and watch a sample for ten minutes: a good batch stays smooth with only slow settling that stirs back, while a batch with no stabiliser or coarse powder leaves a thick sediment.
Now change one number and predict the result. Double the cocoa to 4 kg and the drink turns darker, more bitter, and harder to keep suspended. Halve the sugar and the bitterness dominates. Leave out the stabiliser and the drink still tastes right at first, then fails in the glass. The recipe is a balance, and each ingredient is there for a reason a drinker can taste.
Quick check
In the worked batch, why is the cocoa powder mixed into a little warm milk first instead of dumped into the full 100 litres at once?
Check your answer
Dry powder clumps when it meets liquid, and a clump that forms early is hard to break later, so pre-mixing in a small volume keeps the batch smooth.
9.10 Check yourself
Think about it first: a maker switches from natural cocoa to alkalised cocoa and changes nothing else. What will the drinker notice first: the colour, the taste, or the texture? Why?
- What are the three steps that turn a dried cocoa bean into cocoa liquor?
Check your answer
Roasting, winnowing to remove the shell and keep the nib, and grinding the nibs until the fat melts and the mass flows.
- What is the difference between cocoa liquor and cocoa powder?
Check your answer
Cocoa liquor is the ground nib mass, about half cocoa butter and half solids. Cocoa powder is what is left after much of the butter is pressed out of the liquor, then milled.
- What does alkalising (Dutching) do to cocoa?
Check your answer
It darkens the colour, softens bitter and acidic notes, and helps the powder mix into liquid.
- Why does cocoa powder need a stabiliser in a ready-to-drink beverage?
Check your answer
Cocoa powder does not dissolve, it suspends, so it settles on standing. A stabiliser keeps it suspended long enough to drink.
- In the worked batch, the cocoa is doubled to 4 kg and nothing else changes. Name two things the drinker will notice.
Check your answer
A darker colour and a more bitter taste, and a drink that is harder to keep suspended, with more sediment.
Try it yourself: Make a cup of cocoa from powder and hot milk, and watch it for ten minutes without stirring. Note when the powder starts to settle, and whether stirring brings it back. Then make a second cup, sprinkle the powder onto the milk while stirring instead of dumping it in at once, and note whether it clumps less. Write one sentence explaining the difference.
Key ideas to carry forward
- A cocoa beverage is a drink made from cocoa powder mixed with milk or water and usually sweetened, served hot or cold.
- Fermentation builds the flavour precursors in the bean, and drying stops the process and makes the bean stable.
- Roasting develops the flavour, winnowing keeps the nib, and grinding gives cocoa liquor, about half fat and half solids.
- Pressing removes much of the cocoa butter and leaves press cake, which is milled into cocoa powder.
- Alkalising darkens the colour, softens bitter notes, and helps the powder mix.
- Cocoa carries fat, protein, minerals, flavour compounds, and three stimulants, with theobromine the main one.
- Factory production is mix, heat, homogenise, cool, fill, and chill, and the powder must be kept suspended, not dissolved.
- A worked batch makes the balance visible: 100 litres of milk with 2 kg of cocoa, 8 kg of sugar, and about 0.15 kg of stabiliser, and changing any one number shows in the glass.
Glossary
Cocoa liquor
The thick liquid from grinding roasted cocoa nibs, about half cocoa butter and half solids. Food tech example: cocoa liquor pressed to give butter and powder.
Cocoa butter
The fat of the cocoa bean, pressed out of cocoa liquor. Food tech example: cocoa butter kept in chocolate, pressed out for cocoa powder.
Press cake
The hard cake left after cocoa butter is pressed out of cocoa liquor. Food tech example: press cake milled into cocoa powder.
Dutching
Treating cocoa with an alkali to darken it and soften bitter notes. Food tech example: alkalised cocoa for a smooth, dark drinking cocoa.
Nib
The meaty inside of the cocoa bean after the shell is removed. Food tech example: nibs ground to cocoa liquor.
Winnowing
Cracking roasted beans and blowing the shell away to keep the nib. Food tech example: winnowing after roasting in a cocoa factory.
Theobromine
The main stimulant in cocoa, milder and longer-lasting than caffeine. Food tech example: theobromine in a cup of cocoa.
Homogenisation
Forcing a liquid through a small gap at high pressure to break fat into tiny droplets. Food tech example: homogenising a cocoa beverage so the fat does not rise.
Stabiliser
An ingredient that keeps particles suspended in a drink. Food tech example: stabiliser holding cocoa powder in a ready-to-drink cocoa beverage.
Chocolate milk
Cocoa, sweetener, and cold milk, mixed, heated for safety, homogenised, cooled, and bottled as a ready-to-drink product. Food tech example: the worked batch of 100 litres of milk with 2 kg of cocoa and 8 kg of sugar.
Fermentation (cocoa)
The microbial step where pulp sugars ferment and flavour precursors build in the bean. Food tech example: cocoa beans heaped for several days after harvest.
References
- Paquin, P. (editor). Functional and Speciality Beverage Technology. Woodhead Publishing, 2009.
- Hui, Y. H., Meunier-Goddik, L., Hansen, A. S., Josephsen, J., Nip, W. K., Stanfield, P. S., and Toldra, F. (editors). Handbook of Food and Beverage Fermentation Technology. Marcel Dekker, 2004.
- Shachman, M. The Soft Drinks Companion: A Technical Handbook for the Beverage Industry. CRC Press, 2005.
Unit 10: Soft Drinks
Note
Unit 10: Soft Drinks
A soft drink looks like the simplest thing in the world: sugar, bubbles, and flavour in a bottle. The handbook that guides this unit opens with a warning that making one well is not simple at all. What is Brix, what is a gas volume, why do cloudy drinks need an emulsion, and why does the water matter more than the flavour? This unit answers each question in turn.
10.1 What is a soft drink?
A soft drink is a non-alcoholic, usually carbonated or still, flavoured beverage made from water, a sweetener, acids, flavourings, and often colour, with carbon dioxide added for the carbonated types. The name soft marks the contrast with hard drinks, the alcoholic ones. The family is wide: cola-type drinks, lemon-lime drinks, fruit-flavoured drinks, tonic water, soda water, and still fruit drinks all belong here, and so do fruit juices and cordials, which are covered at the end of this unit.
Making a soft drink well is not simple. The handbook's author, writing from thirty years in the industry, notes that the standard textbooks cover the steps, but the judgement, the troubleshooting, and the reasons behind the numbers are learned on the plant floor. This unit follows that lead: it gives the steps, and it gives the reasons.
🤔 Pause and think: a soft drink is mostly water, yet the water is the hardest ingredient to get right. Why would the ingredient with the least flavour need the most control?
Quick check
What is a soft drink, and what does "soft" mean in the name?
Check your answer
A non-alcoholic flavoured beverage from water, sweetener, acids, flavourings, and often colour, carbonated or still. Soft marks the contrast with hard, alcoholic drinks.
10.2 Ingredients used in soft drink production
Every soft drink is built from the same small set of ingredients, each with a job:
- Water. The largest ingredient, treated and tested as described in Units 7 and 8: clear, soft, tasteless, and microbiologically clean.
- Sweetener. Sugar, most often sucrose, or a sugar syrup, or a permitted sweetener in a low-sugar drink. The sweetener gives sweetness and body, and its level is measured as Brix (see section 10.3).
- Acids. Food acids, most often citric acid, and sometimes phosphoric, malic, or tartaric acid. The acid sharpens the taste, balances the sweetness, and helps preserve the drink.
- Flavourings. Natural flavours, fruit extracts, essences, and flavour emulsions. The flavour is the identity of the drink, and its dose is small and measured.
- Colour. Added colour for a consistent look, dosed so that every batch matches the last.
- Preservatives. Used where needed to stop yeasts and moulds from growing in the drink, especially in still drinks that have no carbonation to protect them.
- Carbon dioxide. The gas that gives the fizz in carbonated drinks, measured in gas volumes (see section 10.4).
The balance between these ingredients is the formulation, and the formulation is written down, measured, and tested, just as it is for a liquor in Unit 2.
Quick check
Name six ingredients used in soft drink production and the job of each.
Check your answer
Water (the bulk and carrier), sweetener (sweetness and body), acid (sharpness and balance), flavouring (identity), colour (consistent look), preservative (stops yeasts and moulds), and carbon dioxide (fizz).
10.3 Brix: measuring the sweetness
Brix is the measure of dissolved sugar in a liquid, stated as grams of sucrose per 100 grams of solution. A syrup at 10 Brix holds 10 g of sucrose in each 100 g. It is measured with a refractometer, which reads how much light bends as it passes through the liquid, or with a hydrometer, which reads the density. The refractometer is the usual plant instrument, because it is fast and needs only a drop.
Brix matters for three reasons. First, it sets the sweetness: the drinker tastes the Brix directly. Second, it is a quality-control number: a batch that reads off its Brix target is a batch that has been mixed wrong, and it is caught before bottling. Third, it relates to density, so the plant can use Brix tables to convert a reading into a sugar level without a laboratory analysis.
One caution from the handbook: when a refractometer reads a sugar solution that also holds a lot of acid, an acidity correction must be added to the reading, because the acid bends the light too. A reading taken without that correction overstates the sugar. The plant's method sheet states the correction, and the operator follows it.
Worked example: checking a Brix reading. A drink is specified at 10.0 Brix. The operator reads 10.0 on the refractometer, applies the acidity correction from the method sheet, and records the corrected value. If the corrected value is 9.6, the batch is under-sweetened, and the syrup dose is adjusted before the run continues. The number, not the taste alone, decides.
Quick check
What is Brix, and how is it measured?
Check your answer
Grams of sucrose per 100 grams of solution. It is measured with a refractometer, which reads how light bends through the liquid, or with a hydrometer, which reads density.
10.4 Carbonated beverages: putting in the fizz
Carbonation is the process of introducing carbon dioxide gas into water or into a beverage. The gas dissolves in the liquid under pressure, and when the bottle is opened, the pressure falls and the gas escapes as bubbles, the fizz and sparkle the drinker sees and feels. The level of carbonation is measured in gas volumes: the volume of carbon dioxide dissolved per volume of drink, measured at standard conditions. A drink at 4 gas volumes holds four times its own volume of gas, dissolved under pressure.
Carbonation is done in a carbonator, where chilled water or beverage meets carbon dioxide under pressure. Chilling matters, because cold liquid holds more gas than warm liquid, so the drink is cooled before carbonation. The gas level is tested on the line, and the handbook gives an example specification of 4.00 plus or minus 0.20 gas volumes: the plant measures, adjusts, and records, so the fizz is the same in every bottle.
The carbon dioxide must be food grade, free of off-odours, because any taint in the gas becomes a taint in the drink. And the bottle and cap must hold the pressure: a poor seal lets the gas out, and the drink goes flat on the shelf.
Carbonation and mixing
↓
↓
↓
↓
Figure 10.1: Carbonation and mixing. Cold liquid holds more gas, so the drink is chilled before carbonation, and the gas level is measured in gas volumes. Drawn from the carbonation chapter in Shachman, The Soft Drinks Companion (2005).
Quick check
What is a gas volume, and why is the drink chilled before carbonation?
Check your answer
A gas volume is the volume of carbon dioxide dissolved per volume of drink. Cold liquid holds more gas than warm liquid, so chilling gives a fuller, more stable fizz.
10.5 Fruit flavours and the cloudy drinks
Fruit flavours come in two forms. Clear flavours dissolve fully and give a bright, clear drink. Cloudy flavours use an emulsion, a fine dispersion of flavour oil in water, to give the drink a cloudy look and a fuller flavour, as in a cloudy citrus drink. The emulsion is made by homogenising the flavour oil with water and a stabiliser, so the oil breaks into tiny droplets that stay suspended instead of rising to the top.
The science of the emulsion is Stokes' law in plain form: small droplets rise slowly, and large droplets rise fast. So the maker aims for small, even droplets, and for an oil whose density is close to the drink's, sometimes with a weighting agent to bring the densities together. A good emulsion stays cloudy and even for the shelf life. A poor one separates, leaving a ring of oil at the neck and a clear liquid below, and the drinker sees the fault at once.
Fruit flavour emulsions are also used to carry the flavour oils that would not dissolve in water on their own. The quality checks are droplet size, turbidity strength, and stability on storage: the emulsion is held, watched, and measured, not just tasted.
🤔 Pause and think: a cloudy citrus drink and a clear lemon drink use the same flavour oil. One is an emulsion, the other is a solution. Which one will separate on the shelf if it is made badly, and why?
Quick check
Why does a cloudy drink need an emulsion, and what makes the emulsion stable?
Check your answer
The flavour oil does not dissolve in water, so it is homogenised into tiny droplets that stay suspended. Small, even droplets rise slowly, and matching the oil density to the drink keeps the emulsion stable.
10.6 Sparkling (soda) water
Sparkling water, also called soda water, is water carbonated with carbon dioxide, with no sweetener and no flavour, or with only a trace of mineral salts. It is the simplest carbonated drink, and it is the base for mixed drinks and the test of a carbonation system: if the plant cannot make a clean, well-carbonated soda water, it cannot make a good flavoured drink either.
The quality points are the same as for any carbonated drink: clean water, food-grade gas, the right gas volume, and a seal that holds the pressure. A soda water that goes flat has failed at the cap, the gas, or the fill, and the fault is found by testing the gas volume in the bottle against the specification.
Quick check
What is soda water, and what does it test about a plant?
Check your answer
Water carbonated with carbon dioxide, with no sweetener or flavour. It tests the carbonation system itself: clean water, food-grade gas, the right gas volume, and a seal that holds pressure.
10.7 Fruit juice, cordials, and still drinks
Not all soft drinks are carbonated. The still family includes:
- Fruit juice. The juice pressed from fruit, served as it is or reconstituted from concentrate. Its quality points are the fruit itself, the sugar-acid balance, the colour, and the absence of off-flavours. Juice is pasteurised to keep it safe, and it is filled hygienically so it keeps without carbonation to protect it.
- Cordials. Concentrated, sweetened fruit syrups that the drinker dilutes with water. The cordial is a concentrate: high Brix, strong flavour, and a long shelf life from its sugar and acid, and the dilution is done by the drinker at home.
- Still fruit drinks. Ready-to-drink juices and fruit-flavoured drinks with no carbonation. They need a preservative or a heat treatment to stay safe, because they have no fizz to slow microbial growth, and their quality checks are Brix, acidity, flavour, and microbial safety.
Practical note: the laboratory practical for this subject asks for preparation of fruit juice and cordials. At the bench, that means: select sound fruit, wash it, press the juice, measure the Brix and the acidity, pasteurise gently, and fill into clean bottles. For a cordial, add sugar to the target Brix, add acid to balance it, heat to dissolve, and bottle hot into clean bottles. Record the Brix, the acidity, and the taste: the numbers are the recipe, and the taste is the check.
Quick check
Why do still fruit drinks need a preservative or a heat treatment when carbonated drinks may not?
Check your answer
Still drinks have no carbonation to slow microbial growth, so they need heat or a preservative to stay safe on the shelf.
10.8 Taste testing and quality control
A soft drink is judged by the drinker, so the plant judges it by tasting as well as by measuring. The handbook describes several taste tests:
- The expert taste panel. Trained tasters who know the product and can name a fault, not just dislike a drink.
- The two-sample preference test. Two samples, and the taster picks the preferred one.
- The triangular taste test. Three samples, two the same and one different, and the taster must pick the odd one out. It is the standard test for whether a change is noticeable.
- The hedonic ranking test. Tasters rank samples by liking, on a scale that runs from dislike to like.
The laboratory measures sit beside the tasting: Brix, carbonation in gas volumes, acidity, clarity, fill level, seal, and microbial count. The handbook's example quality sheet lists carbonation at 4.00 plus or minus 0.20 gas volumes, and the plant tests it on the line. A batch that passes the laboratory and fails the panel is still a failed batch: the drinker is the final judge.
🤔 Pause and think: a new syrup tastes better than the old one in a preference test, but the triangular test shows drinkers cannot tell them apart. Which result matters more for a maker who wants to change the recipe quietly, and which matters more for a maker who wants to advertise a new taste?
Quick check
What is the triangular taste test, and what does it show?
Check your answer
Three samples, two the same and one different, and the taster must pick the odd one out. It shows whether a change is actually noticeable.
10.9 Worked example: from 65 Brix syrup to 1,000 litres at 10 Brix
Turn the Brix reading from section 10.3 into a syrup-room calculation. The target is 1,000 litres of finished drink at 10.0 Brix, and the syrup on hand is 65 Brix. Work on a mass basis, because Brix is grams of sugar per 100 grams of solution, and take the finished drink as about 1,000 kg, since its density is close to that of water.
- Sugar needed. At 10 Brix, 1,000 kg of drink holds 1,000 x 0.10 = 100 kg of sugar.
- Syrup needed. Syrup at 65 Brix holds 0.65 kg of sugar per kilogram, so 100 ÷ 0.65 = about 154 kg of syrup.
- Water and other ingredients. The rest of the batch, about 846 kg, is treated water plus the acid, flavour, and colour, added to make the total up to 1,000 kg.
- Check. Measure the finished drink on the refractometer, apply the acidity correction from the method sheet, and compare with 10.0 Brix. If the corrected reading is 9.6, the batch is short by 0.4 Brix, which is 4 kg of sugar per 1,000 kg, and the syrup dose is adjusted before the run continues.
The same arithmetic catches a syrup-room error early: a batch mixed from 100 kg of syrup instead of 154 kg holds only 65 kg of sugar, reads about 6.5 Brix, and tastes thin, and the refractometer shows it before a single bottle is filled.
Quick check
How much 65 Brix syrup is needed to make 1,000 litres of drink at 10 Brix, and what does the refractometer catch if only 100 kg of syrup is used?
Check your answer
About 154 kg of syrup: 100 kg of sugar divided by 0.65. With only 100 kg of syrup the drink holds 65 kg of sugar and reads about 6.5 Brix, which the refractometer shows before bottling.
10.10 Check yourself
Think about it first: a carbonated drink leaves the plant at 4.0 gas volumes and arrives at the shop flat. The Brix is correct and the flavour is right. Where did the fault happen: in the syrup room, in the carbonator, or at the cap? What single test proves it?
- What is Brix, and why is an acidity correction sometimes needed?
Check your answer
Brix is grams of sucrose per 100 grams of solution, read by refractometer. Acid bends light too, so a reading on a high-acid drink overstates the sugar unless the correction is applied.
- What is a gas volume, and what is the example specification given in the books?
Check your answer
The volume of carbon dioxide dissolved per volume of drink. The example specification is 4.00 plus or minus 0.20 gas volumes.
- Why is a cloudy citrus drink an emulsion, and what makes it separate?
Check your answer
The flavour oil does not dissolve in water, so it is homogenised into tiny droplets. Large droplets rise fast and the oil separates, leaving a ring at the neck.
- What is the difference between a fruit juice and a cordial?
Check your answer
Fruit juice is the pressed juice, served as it is or reconstituted. A cordial is a concentrated, sweetened fruit syrup that the drinker dilutes with water.
- A finished drink reads 9.6 Brix after the acidity correction against a 10.0 Brix target. How much sugar is it short by per 1,000 kg, and what is adjusted?
Check your answer
It is short by 0.4 Brix, which is 4 kg of sugar per 1,000 kg, and the syrup dose is adjusted before the run continues.
Try it yourself: Take any carbonated soft drink you can read about or see in a shop, and copy its ingredient list from the label. Sort the ingredients into the groups from section 10.2: water, sweetener, acid, flavouring, colour, preservative, and carbon dioxide. Then write one sentence saying which ingredient you think sets the flavour most, and one saying which one you think is hardest for the maker to control.
Key ideas to carry forward
- A soft drink is a non-alcoholic flavoured beverage from water, sweetener, acid, flavouring, colour, and often carbon dioxide.
- Brix measures dissolved sugar as grams of sucrose per 100 grams of solution, read by refractometer, with an acidity correction where needed.
- Carbonation dissolves carbon dioxide under pressure, measured in gas volumes, and cold liquid holds more gas.
- Cloudy drinks use a flavour emulsion: tiny oil droplets kept suspended, with small size and matched density for stability.
- Soda water is carbonated water with no sweetener or flavour, and it tests the carbonation system.
- Fruit juices, cordials, and still drinks have no fizz to protect them, so they need heat or a preservative.
- Taste testing, from the expert panel to the triangular test, sits beside laboratory measures, and the drinker is the final judge.
- A worked syrup calculation turns Brix into kilograms: 1,000 litres at 10 Brix needs 100 kg of sugar, which is about 154 kg of 65 Brix syrup.
Glossary
Soft drink
A non-alcoholic flavoured beverage, carbonated or still. Food tech example: a lemon-lime drink made from water, sugar, acid, and flavouring.
Brix
Grams of sucrose per 100 grams of solution, a measure of dissolved sugar. Food tech example: a drink specified at 10.0 Brix.
Refractometer
An instrument that reads sugar level by how light bends through a liquid. Food tech example: a refractometer reading the Brix of a syrup on the plant floor.
Gas volumes
The volume of carbon dioxide dissolved per volume of drink. Food tech example: a drink specified at 4.00 plus or minus 0.20 gas volumes.
Carbonation
Dissolving carbon dioxide gas into water or a beverage under pressure. Food tech example: carbonating chilled water in a carbonator.
Emulsion
A fine dispersion of one liquid in another, such as flavour oil droplets in water. Food tech example: the emulsion that makes a citrus drink cloudy.
Weighting agent
An ingredient that brings a flavour oil's density closer to the drink's, so the emulsion stays stable. Food tech example: a weighting agent in a cloudy citrus drink.
Cordial
A concentrated, sweetened fruit syrup diluted by the drinker with water. Food tech example: a fruit cordial bottled at high Brix.
Triangular taste test
A test with three samples, two the same and one different, where the taster picks the odd one out. Food tech example: testing whether a recipe change is noticeable.
Syrup
A concentrated sugar solution used to sweeten a drink to its Brix target. Food tech example: a 65 Brix syrup dosed at about 154 kg per 1,000 litres of drink at 10 Brix.
Soda water
Water carbonated with carbon dioxide, with no sweetener or flavour. Food tech example: soda water used as a mixer and as a test of carbonation.
References
- Shachman, M. The Soft Drinks Companion: A Technical Handbook for the Beverage Industry. CRC Press, 2005.
- Paquin, P. (editor). Functional and Speciality Beverage Technology. Woodhead Publishing, 2009.
- Scardina, P. G. (editor). Fruit Juices: Properties, Consumption and Nutrition. Nova Science Publishers, 2012.
- Hui, Y. H., Meunier-Goddik, L., Hansen, A. S., Josephsen, J., Nip, W. K., Stanfield, P. S., and Toldra, F. (editors). Handbook of Food and Beverage Fermentation Technology. Marcel Dekker, 2004.