Login Register

Access the GIFSQ Portal

Select your user type to log in or register a new account.

Student Portal

Access your food safety courses and exams.

Instructor Portal

Manage courses, view student submissions, and grade quizzes.

Company Portal

Manage corporate setup, view employee logs, and access QA services.

Food Engineering Part 4 Quiz

GIFSQ ID: ART-1081

Questions on the engineering behind food production — unit operations and plant thinking. Round four on this topic,…

What this quiz covers

This quiz tests the numbers and definitions a food engineer uses every day, from flow in a pipe to the heat of a dryer. Flow turns turbulent when the Reynolds number passes about 4,000, and a fluid only flows when a shear stress acts on it: pressure alone, with no shear, leaves it still. Radiant energy travels as electromagnetic waves, and when hot and cold streams run the same way through a heat exchanger, the arrangement is called both parallel flow and co-current flow.

Twenty questions cover the plant in order. The psychrometric chart reads every property of moist air from one diagram, and an on-off controller is a proportional controller with its gain pushed to the limit. Chlorine, as hypochlorite, is the standard wet-cleaning sanitiser, and wet cleaning costs most in water use and wastewater treatment. Candling inspects eggs against a light, and blanching does three jobs at once: it inactivates enzymes, washes the surface, and fixes the colour. The set closes with the energy comparisons: a multiple-effect evaporator uses less steam as effects are added, drying uses much more heat than evaporation, and freeze drying is the one method too costly for bulk foods.

Concepts you will need

Two ladders carry this set. First, the Reynolds ladder: below about 2,100 is laminar, between 2,100 and 4,000 is transitional, and above 4,000 is turbulent. Second, the heat ladder: evaporation boils water out of a liquid cheaply, drying drives it out of a solid at far greater cost, and freeze drying sublimates ice under vacuum at the highest cost of all.

How to use this quiz

You get 20 seconds per question and one attempt at each answer, so learn the Reynolds numbers first: 2,100 and 4,000 are the two marks. Then fix the cleaning pair: chlorine sanitises, and water plus effluent treatment is the cost. When a question asks which method suits a food, check the food first: heat-sensitive liquids suit spray drying, bulk foods never suit freeze drying. Then retake the quiz and check the ladders hold.

Food Engineering Part 4 Quiz
Uncategorized

Choose how you want to play

Sound effects
🔈 Volume
Show explanations
🔊 Auto-read every question
Reading speed

Answer explanations

Worked through the quiz? Here is why each correct answer is correct: the concept behind it, in plain terms.

  1. Flow in a pipe is considered turbulent when the Reynolds number exceeds about ___.
    Correct answer: 4,000. In round tubes the accepted engineering break points are: below about 2,100 the flow is laminar; between roughly 2,100 and 4,000 it is transitional; and above about 4,000 it is taken as fully turbulent for design calculations.
  2. A psychrometric chart is used to determine ___ of moist air.
    Correct answer: All of these properties. A psychrometric chart packs the thermodynamic state of moist air onto one diagram: dry- and wet-bulb temperatures, relative and absolute humidity, dew point, enthalpy, and specific volume can all be read from a state point. The chart is drawn for a fixed barometric pressure.
  3. An on–off controller is best described as a limiting form of ___ control.
    Correct answer: Proportional. An on-off, two-position, controller is simply a proportional controller with its gain pushed to infinity: any tiny error slams the output fully on or fully off. That is why control texts describe on-off as the limiting case of proportional control.
  4. Which of the following is necessary for a fluid to flow?
    Correct answer: Shear stress. A fluid is defined as a substance that deforms continuously under a shear stress, no matter how small. A static fluid can sit under pressure forever without flowing; only when a shearing force acts do the layers slide past each other.
  5. Radiant energy is transported through space by ___ waves.
    Correct answer: Electromagnetic. Radiant heat leaves a surface as electromagnetic waves, the same family as light, radio, and X-rays, travelling through space at the speed of light. It needs no medium, unlike sound waves.
  6. When hot and cold fluids flow in the same direction through a heat exchanger, the arrangement is called ___ flow.
    Correct answer: Both parallel and co-current. When both streams enter at the same end and travel the same direction, textbooks call it parallel flow, and equivalently co-current flow. Counter-current is the opposite arrangement, so both names together are the complete name for same-direction flow.
  7. A fluid showing reversible, time-dependent thinning under shear is said to be ___.
    Correct answer: Thixotropic. Thixotropy is exactly this: under shear the structure breaks down and viscosity falls, and when the shear stops the structure rebuilds, fully reversible and time-dependent. Ketchup is the classic example. Pseudoplastic thinning is instant, not time-dependent, and dilatant fluids thicken instead.
  8. The SI unit of the overall heat-transfer coefficient is ___.
    Correct answer: W/(m²·K). The overall coefficient U appears in q equals U times A times delta T, so its units must be energy per time, area, and temperature: watts per square metre per kelvin, W/(m²·K).
  9. Which sanitising chemical is generally used in wet-cleaning methods?
    Correct answer: Chlorine (hypochlorite). Chlorine, usually as sodium hypochlorite, is the classic wet-cleaning sanitizer: cheap, broad-spectrum, and easy to rinse away. Salt, permanganate, and isopropanol are not the standard food-plant wet-cleaning sanitizers.
  10. Wet cleaning of raw materials is expensive mainly because of ___.
    Correct answer: Large water use and wastewater treatment. Wet cleaning soaks, rinses, and flushes, using huge water volumes that then must be treated as wastewater, which is both a utility cost and an environmental-compliance cost. Chemicals and labour matter, but water use plus effluent treatment dominate the bill.
  11. The operation that removes contaminants and foreign matter from raw materials is ___.
    Correct answer: Cleaning. Cleaning is the unit operation whose whole job is removing contaminants and foreign matter, soil, stones, leaves, insects, from raw materials. Sorting separates by quality attributes, and dicing and slicing are size-reduction operations.
  12. Candling is used to ___.
    Correct answer: Inspect the interior quality of eggs against a light. Candling shines a bright light through the shell so an inspector sees the interior: air cell size, yolk position, blood spots, cracks, without breaking the egg. It is an interior-quality inspection method, not a washing, grading-by-weight, or pasteurisation step.
  13. Blanching of vegetables results in ___.
    Correct answer: All of these effects. Blanching does all three: the brief heat treatment inactivates enzymes such as peroxidase and lipoxygenase that would spoil quality in storage, it washes surface dirt and microbes, and it brightens and fixes green colour.
  14. In a multiple-effect evaporator, steam consumption ___ as the number of effects increases.
    Correct answer: Decreases. In a multiple-effect evaporator, the vapour boiled off in one effect becomes the heating steam for the next, so one kilogram of live steam evaporates roughly one kilogram of water per effect. Add effects and the steam economy climbs, meaning steam consumption per kilogram of product falls.
  15. Compared with evaporation, the heat consumption in drying is ___.
    Correct answer: Much higher. Evaporation boils water out of a liquid feed with relatively efficient heat use; drying must additionally drive moisture out of a solid matrix, heat the solid, and often works with dilute air, so drying consumes far more energy per kilogram of water removed.
  16. Which drying method is generally uneconomic for bulk foods because of its high cost?
    Correct answer: Freeze drying. Freeze drying gives superb quality but sublimating ice under vacuum is slow and energy-hungry, with costly equipment, so for bulk, low-margin foods it is uneconomic. Sun, tray, and spray drying are the economical bulk methods, and freeze drying is reserved for high-value products like instant coffee.
  17. Which equipment separates contaminants from particulate foods on the basis of density differences?
    Correct answer: Gravity separator. A gravity separator stratifies a bed of particles in a rising air stream on a tilted, vibrating deck: denser particles settle and travel differently from light ones. Screens separate by size, magnets by magnetism, and aspirators mainly by air drag. Density difference is the gravity separator's basis.
  18. Spray drying is particularly suited to ___ liquid foods.
    Correct answer: Heat-sensitive. In spray drying the droplet meets hot air for only seconds, so the particle never reaches damaging temperatures, ideal for heat-sensitive liquids like milk, eggs, and fruit juices. Highly viscous or fibrous feeds cannot be atomized well, and carbonated liquids are a non-starter.
  19. Distillation separates components based on differences in ___.
    Correct answer: Vapour pressure (volatility). Distillation separates by vapour-pressure differences: the more volatile component preferentially vaporises, and repeated vaporisation and condensation enrich it. Density, solubility, and viscosity are the bases of other separations, not distillation.
  20. A vacuum filter can apply a maximum pressure difference of about:
    Correct answer: One atmosphere. A vacuum filter pulls against atmospheric pressure: the filter medium sees the full atmosphere on one side and near-vacuum on the other, so the theoretical maximum driving force is about one atmosphere, near 101 kPa. Pressing harder needs a pressure filter.