Login Register

Access the GIFSQ Portal

Select your user type to log in or register a new account.

Student Portal

Access your food safety courses and exams.

Instructor Portal

Manage courses, view student submissions, and grade quizzes.

Company Portal

Manage corporate setup, view employee logs, and access QA services.

Food Engineering Part 2 Quiz

GIFSQ ID: ART-1079

What this quiz covers

This quiz walks the core preservation operations: canning, chilling, freezing, drying, and irradiation, with the physics that ties them together. A can is sealed with headspace left inside, so a vacuum forms as it cools and the ends stay drawn in. Chilling holds food at 0 to 5 °C, freezing stores it below minus 18 °C, and the more water a food holds, the longer it takes to freeze, because every kilogram of water gives up about 334 kJ of latent heat before it turns to ice.

Twenty questions cover the operations in order. Drying is governed by heat and mass transfer in both the drying air and the food itself, and cold sterilisation means sterilising with irradiation, not heat. Cobalt-60 is the standard radiation source, and radappertisation uses high-dose irradiation to sterilise, even against Clostridium botulinum spores. Then the powder properties, in the order they happen when a powder meets water: wettability first, then sinkability, then solubility. The set closes with three mass balances, the kind of sums a plant engineer does daily: drying 100 kg of orange juice from 60 percent to 20 percent moisture removes 50 kg of water, and an evaporator question that ends with 4,000 kg of solids handled.

Concepts you will need

Keep boiling and evaporation apart: boiling makes bubbles throughout the liquid, evaporation happens only at the surface. And keep the three powder words in their order: wetting is water taken up on the surface, sinking is the particles dropping below the surface, and dissolving is the constituents going into solution. Each word names one step, and the quiz asks all three.

How to use this quiz

You get 20 seconds per question and one attempt at each answer, so learn the temperature pair first: chilling at 0 to 5 °C, freezing below minus 18 °C. Then fix the powder order: wet, sink, dissolve. When a question gives you masses and percentages, hold the solids constant: solids never leave in drying or evaporation, so they are the anchor for every balance. Then retake the quiz and check the balances hold.

Food Engineering Part 2 Quiz
Uncategorized

Choose how you want to play

Sound effects
🔈 Volume
Show explanations
🔊 Auto-read every question
Reading speed

Answer explanations

Worked through the quiz? Here is why each correct answer is correct: the concept behind it, in plain terms.

  1. Why is headspace left in a can before sealing?
    1. To trap a cushion of air
    2. To allow a vacuum to form on cooling (correct answer)
    3. To fill it with steam
    4. To make the can lighter

    Correct answer: To allow a vacuum to form on cooling. Headspace is left in a can so that steam and expanding contents can escape during exhausting, and so that as the sealed can cools, the headspace gases contract and water vapor condenses — pulling a vacuum that keeps the can ends drawn in.
  2. Holding food at 0 to 5 degrees Celsius is called:
    1. Chilling (correct answer)
    2. Freezing
    3. Cooling
    4. Both chilling and cooling

    Correct answer: Chilling. Holding food at 0–5 °C is chilling: cold holding at a steady temperature above freezing that slows microbial growth without forming ice crystals. 'Cooling' is not the same term — in food-safety usage it is the temperature-reduction process (for example, taking cooked food through the danger zone), not a holding state (FDA Food Code §3-501.14 vs §3-501.16). That is why chilling alone, not both terms, is the correct answer.
  3. Storing food below minus 18 degrees Celsius is called:
    1. Chilling
    2. Freezing (correct answer)
    3. Freeze drying
    4. Freeze concentration

    Correct answer: Freezing. Freezing means storing food below −18 °C (0 °F), the standard frozen-storage temperature at which microbial growth stops and quality deterioration slows sharply.
  4. How does a food's water content affect its freezing time?
    1. More water means longer freezing time (correct answer)
    2. Water content does not matter
    3. Less water means longer freezing time
    4. More water means shorter freezing time

    Correct answer: More water means longer freezing time. Water has a high latent heat of fusion (about 334 kJ/kg), so the more water a food contains, the more heat must be removed to freeze it. Freezing time therefore lengthens as water content rises.
  5. Cooking in hot air, as in an oven, covers which operations?
    1. Baking
    2. Roasting
    3. Frying
    4. Both baking and roasting (correct answer)

    Correct answer: Both baking and roasting. Baking and roasting are both dry-heat cooking in hot air inside an oven, differing mainly in the product — baked goods versus meats and vegetables. Frying uses hot oil or fat, a different heat-transfer medium altogether.
  6. The drying process is governed by the heat and mass transfer characteristics of
    1. the drying air alone
    2. the food material alone
    3. both the drying air and the food material (correct answer)
    4. neither the drying air nor the food material

    Correct answer: both the drying air and the food material. Drying rate depends on heat and mass transfer in both the drying air and the food material: the air's temperature, humidity, and velocity set how much moisture the air can carry away, while the food's moisture diffusivity, structure, and surface area set how fast water reaches the surface. Neither the air nor the food alone governs the process.
  7. Cold sterilization refers to
    1. sterilization using liquid nitrogen
    2. sterilization using irradiation (correct answer)
    3. sterilization using ice
    4. sterilization followed by freezing

    Correct answer: sterilization using irradiation. 'Cold sterilization' of foods means sterilizing without heat — by ionizing irradiation — so heat-sensitive products keep their eating quality while microbes are destroyed.
  8. Which of these can serve as a source of radiation for food irradiation?
    1. Carbon-14
    2. Cobalt-60 (correct answer)
    3. Radium
    4. Uranium

    Correct answer: Cobalt-60. Cobalt-60 is the standard gamma source for food irradiation. Carbon-14 is a tracer, and radium and uranium are not approved food-irradiation sources.
  9. Radappertization involves the use of
    1. electric current to sterilize the product
    2. magnetic energy to sterilize the product
    3. heat energy to sterilize the product
    4. irradiation to sterilize the product (correct answer)

    Correct answer: irradiation to sterilize the product. Radappertization is sterilization by ionizing radiation at doses high enough to destroy even Clostridium botulinum spores (typically 25–45 kGy), producing shelf-stable foods without heat.
  10. Sublimation of water ice can take place only when
    1. both vapour pressure and temperature are above the triple point of water
    2. vapour pressure is below the triple point of water
    3. vapour pressure is above the triple point of water
    4. both vapour pressure and temperature are below the triple point of water (correct answer)

    Correct answer: both vapour pressure and temperature are below the triple point of water. Ice sublimes only below water's triple point (0.01 °C and 611 Pa): both the vapour pressure and the temperature must stay beneath it. That principle is the basis of freeze drying.
  11. The ability of powder particles to sink quickly into water is known as
    1. sinkability (correct answer)
    2. dispersibility
    3. wettability
    4. solubility

    Correct answer: sinkability. Sinkability is the powder property describing how quickly particles sink below the water surface when sprinkled on — the first step of reconstituting a powder.
  12. The ability of powder particles to take up water on their surface is called
    1. sinkability
    2. dispersibility
    3. wettability (correct answer)
    4. solubility

    Correct answer: wettability. Wettability describes how readily powder particles take up water on their surfaces (wetting). It is distinct from sinking (sinkability) and from dissolving (solubility).
  13. The rate and extent to which the constituents of powder particles dissolve in water is termed
    1. sinkability
    2. dispersibility
    3. wettability
    4. solubility (correct answer)

    Correct answer: solubility. Solubility covers both the rate and the extent to which a powder's constituents dissolve in water — the final reconstitution measure after wetting, sinking, and dispersion.
  14. 100 kg of orange juice is dried from 60% to 20% moisture (by weight). The mass of moisture removed, in kg, is
    1. 52
    2. 20
    3. 40
    4. 50 (correct answer)

    Correct answer: 50. Solids stay constant through drying: 100 kg × 40% = 40 kg of solids. At 20% moisture (80% solids), the final mass is 40/0.8 = 50 kg, so the moisture removed is 100 − 50 = 50 kg.
  15. A multiple-effect evaporator processes 400 kg of concentrated juice per day while concentrating it from 10% to 25% solids. The water evaporated per day, in kg, is
    1. 600 (correct answer)
    2. 2400
    3. 6000
    4. 1600

    Correct answer: 600. The concentrated juice holds 400 kg × 25% = 100 kg of solids. Feed at 10% solids must therefore be 100/0.10 = 1000 kg, and the water evaporated per day is 1000 − 400 = 600 kg.
  16. An evaporator concentrating fruit juice from 10% to 40% solids evaporates 30,000 kg of water. The solids handled by the system, in kg, are
    1. 4000 (correct answer)
    2. 9000
    3. 4600
    4. 3000

    Correct answer: 4000. Let F be the feed mass; solids S = 0.10F. The product P = F − 30,000 carries the same solids at 40%, so 0.10F = 0.40(F − 30,000), giving F = 40,000 kg and S = 4,000 kg of solids handled.
  17. Boiling takes place
    1. from throughout the mass (correct answer)
    2. from the surface
    3. from the bottom
    4. either of the above three depending on the direction of heat

    Correct answer: from throughout the mass. Boiling is bulk vaporization: vapor bubbles form throughout the liquid mass. That distinguishes it from evaporation, which takes place only at the surface.
  18. The driving force for heat transfer is
    1. energy difference
    2. pressure difference
    3. temperature difference (correct answer)
    4. heat difference

    Correct answer: temperature difference. Heat flows down a temperature gradient, so the temperature difference is the driving force for conduction, convection, and radiation heat transfer alike.
  19. The refrigeration cycle is based on the
    1. first law of thermodynamics
    2. second law of thermodynamics (correct answer)
    3. Newton's first law of motion
    4. Newton's second law of motion

    Correct answer: second law of thermodynamics. A refrigeration cycle moves heat from a cold body to a hot one, which the first law alone cannot justify — the cycle rests on the second law of thermodynamics (the Clausius statement).
  20. According to the second law of thermodynamics
    1. energy cannot be created
    2. energy cannot be destroyed
    3. heat cannot flow from a cold body to a hot body without external work (correct answer)
    4. all of the above

    Correct answer: heat cannot flow from a cold body to a hot body without external work. The second law states that heat cannot flow from a cold body to a hot body without external work input. The 'energy cannot be created or destroyed' statements belong to the first law, not the second.