Flour Quality and Testing – Part 1 Quiz
GIFSQ ID: ART-0503
What this quiz covers
Flour quality is measured, not guessed. Farinographs, alveographs, extensographs, amylographs, and falling number tests each report one property a baker needs: mixing tolerance, dough strength, starch behaviour, or enzyme activity. This quiz tests whether you can read those instruments.
Twenty questions cover the Kjeldahl protein factor for wheat; wet gluten washing; farinograph consistency and stability; alveograph P/L ratio and W value; extensograph R50; amylograph peak viscosity; maltose figure as diastatic activity; flour moisture limits; granulation sieves; mixograph sample size; Gluten Index; pentosans and water absorption; Zeleny sedimentation acid; patent flour streams; sprout damage and amylase; sticky dough; and falling number meaning.
Concepts you will need
Match each instrument to its single output: farinograph for mixing, alveograph for strength and extensibility, extensograph for resistance, amylograph for starch pasting, falling number for amylase. Instrument plus output, learned as a pair, answers most questions here.
How to use this quiz
You get 20 seconds per question and one attempt at each answer, so name the instrument before the value. A wrong answer usually means two instruments swapped: relearn the instrument list before retaking.
Choose how you want to play
Answer explanations
Worked through the quiz? Here is why each correct answer is correct — the concept behind it, in plain terms.
- Kjeldahl nitrogen in wheat flour is converted to protein with which factor?
Correct answer: 5.7. Wheat flour uses the 5.7 nitrogen-to-protein factor. The familiar 6.25 is the general factor; 6.38 belongs to dairy. - Wet gluten is washed from a flour-and-water dough with which liquid?
Correct answer: 2% salt solution. A 2% salt solution washes the starch away and leaves the wet gluten mass. Plain water alone disperses the gluten too much. - In a farinograph test, water is added to bring the dough to what standard consistency?
Correct answer: 500 Brabender Units. Farinograph water absorption is always reported at 500 Brabender Units — the common reference point that lets mills compare flours. - On a farinogram, a long stability time tells the baker the flour has?
Correct answer: Good mixing tolerance. Long stability means the dough resists breakdown during mixing — the mark of a strong, tolerant flour. - A high P/L ratio on an alveograph curve means the dough is?
Correct answer: Strong and inextensible. P measures tenacity and L extensibility, so a high P/L ratio describes a strong but inextensible — bucky — dough. - The alveograph 'W' value, the deformation energy, is used as a measure of?
Correct answer: Baking strength of the flour. W is the area under the alveograph curve — the deformation energy — and millers read it as the flour's baking strength. - On an extensograph, the 'R50' reading reports?
Correct answer: Resistance to extension after 50 mm stretch. R50 is the resistance recorded when the dough piece has been stretched 50 mm — a direct read on dough strength. - A Brabender amylograph heats a flour-water slurry and tracks viscosity. What does the peak viscosity reveal?
Correct answer: Starch pasting behavior. Peak viscosity on the amylograph reflects how the starch gelatinizes and pastes — the pasting behavior of the flour. - The 'maltose figure' of flour is a miller's measure of?
Correct answer: Diastatic (gas-producing) activity. The maltose figure estimates diastatic activity — how much fermentable sugar the flour's own enzymes can release for the yeast. - For safe storage, wheat flour moisture should not exceed about?
Correct answer: 14%. Flour above about 14% moisture risks mould and caking in storage, so mills dry and hold it at or below that line. - Flour granulation — its particle-size distribution — is measured with?
Correct answer: A stack of sieves. Granulation is found by sieve analysis: the flour is shaken through a stack of sieves and each fraction weighed. - A mixograph is prized in wheat breeding because a test needs?
Correct answer: Only a small flour sample. The mixograph works on about 10 g of flour, so breeders can test dough behavior from a single plant's grain. - The Gluten Index from a Glutomatic test describes?
Correct answer: Gluten strength. The Gluten Index is the share of wet gluten that stays on the sieve — a direct index of gluten strength, not amount. - Besides protein and damaged starch, which flour component most increases water absorption?
Correct answer: Pentosans. Pentosans (arabinoxylans) soak up many times their weight in water, so they lift absorption well beyond what protein alone explains. - The Zeleny sedimentation test uses which acid to swell the gluten?
Correct answer: Lactic acid. The Zeleny test shakes flour in a dilute lactic acid solution; stronger glutens settle into a larger sediment volume. - Patent flour comes from which milling streams?
Correct answer: First-reduction streams. Patent flour is drawn from the first-reduction streams — the purest, lowest-ash flour the mill produces. - Sprout-damaged wheat shows high activity of which enzyme?
Correct answer: Amylase. Sprout-damaged wheat shows high amylase activity — germination switches the enzyme on. - How does too much alpha-amylase activity affect dough?
Correct answer: Sticky. Too much alpha-amylase activity breaks down starch into dextrins, making the dough sticky. - Alpha-amylase activity in flour is measured as what?
Correct answer: Falling number. Alpha-amylase activity in flour is measured as the falling number — the seconds a stirrer takes to fall through the heated paste. - A higher falling number indicates what level of amylase activity?
Correct answer: Low. A higher falling number indicates low amylase activity — the paste stays thick because little starch has been degraded.
Questions on judging flour — the tests millers and bakers rely on.
Choose how you want to play