Enzymes Quiz (Set 3)
GIFSQ ID: ART-1378
What this quiz covers
This quiz covers enzymes from the definition to the factory floor: what they are, how they work, and where food uses them. It starts with the basics: enzymes speed up biochemical reactions by lowering the activation energy, each enzyme acts on particular substrates, and the active site is the specific region where the substrate binds. The induced fit model explains the fit itself: the active site moulds around the substrate when it binds. From there the set walks through the vocabulary of the field: the turnover number kcat tells how many substrate molecules one active site converts per second, a complete catalytically active enzyme with its cofactor is a holoenzyme, isoenzymes are different molecular forms that catalyse the same reaction, and enzymes fall into six major classes based on the type of reaction they catalyse, with amylases, proteases and lipases all sitting in the hydrolases.
The second half covers control and use. Allosteric enzymes are regulated by molecules that bind at a separate regulatory site, and in feedback inhibition the end product of a pathway switches off an early enzyme of that same pathway. Many enzymes need metal ion cofactors such as zinc, magnesium or iron, while NAD+ and FAD serve as coenzymes that carry electrons between reactions, and ribozymes show that even RNA can act as an enzyme. Warming a reaction speeds it up until heat denatures the protein, which is why boiling destroys enzyme activity, and digestive proteases are made as inactive zymogens so they do not digest the cells that produce them. Food uses close the set: rennet, chymosin, curdles milk by specifically cleaving kappa casein on micelle surfaces, pectinase breaks down pectin to clarify fruit juice, and glucose oxidase removes dissolved oxygen to slow browning.
An enzyme lowers the barrier, it does not change the destination
The one idea that answers half the questions in this set is that an enzyme changes how fast a reaction runs, not whether it can run or what it produces. Lowering the activation energy lets the reaction proceed at a useful speed at body temperature or in a vat, and when the protein unfolds, the activity is gone because the shape of the active site is gone. Denaturation, regulation and cofactors all make sense once the active site is seen as a shaped pocket that must fit the substrate and must stay intact.
How to use this quiz
Take the quiz cold first, then read the explanations below the player. Each answer gives the reason behind the key, with the definitions and the food examples a food technologist is expected to know by heart.
Choose how you want to play
Answer explanations
Worked through the quiz? Here is why each correct answer is correct: the concept behind it, in plain terms.
- Rennet (chymosin) curdles milk for cheese by
Correct answer: Rennet (chymosin) curdles milk for cheese by specifically cleaving kappa-casein on micelle surfaces. Chymosin (rennet) is a protease that specifically cleaves kappa-casein at the Phe105βMet106 bond on the surface of casein micelles. Removing the hydrophilic tail of kappa-casein destabilizes the micelles, which then aggregate into a curd. It does not curdle milk by acid, heat, or salt. - Enzyme specificity means
Correct answer: Each enzyme acts on particular substrate(s). Enzyme specificity means each enzyme acts on particular substrates β often a single molecule or a narrow group β because the substrate must fit the active site’s shape and chemistry. Enzymes do not work on any molecule, and they are not interchangeable. - Ribozymes are unusual enzymes made of
Correct answer: RNA. Ribozymes are catalytic RNA molecules β the exception to the rule that enzymes are proteins. The classic examples are the self-splicing introns and the RNA core of the ribosome’s peptidyl transferase. They are not made of protein, lipid, or carbohydrate. - Pectinase is added to fruit juice to
Correct answer: Pectinase is added to fruit juice to break down pectin and clarify the juice. Pectinase breaks down pectin, the polysaccharide that makes fruit juice cloudy and viscous. Degrading it clarifies the juice and improves pressing yield. It adds no sweetness or color and does not thicken. - Glucose oxidase is used in some foods to
Correct answer: Glucose oxidase is used in some foods to remove dissolved oxygen and slow browning. Glucose oxidase converts glucose and dissolved oxygen into gluconic acid and hydrogen peroxide, removing the oxygen that drives browning and oxidation. Foods use it to slow enzymatic browning and extend shelf life. It does not sweeten, thicken, or carbonate. - NAD+ and FAD serve enzymes as
Correct answer: Coenzymes that carry electrons between reactions. NAD+ and FAD are coenzymes that accept and carry electrons (as NADH and FADH2) between oxidation-reduction reactions. They are not consumed β they are regenerated and reused. They are carriers, not substrates, scaffolds, or inhibitors. - Isoenzymes are
Correct answer: Isoenzymes are different molecular forms that catalyze the same reaction. Isoenzymes (isozymes) are different molecular forms of an enzyme β differing in amino acid sequence β that catalyze the same reaction, such as the lactate dehydrogenase isoforms in different tissues. They are not identical, not inhibitors, and not damaged enzymes. - Digestive proteases are manufactured as inactive zymogens to
Correct answer: Digestive proteases are manufactured as inactive zymogens to prevent them from digesting the cells that produce them. Digestive proteases such as trypsinogen and pepsinogen are synthesized as inactive zymogens so they cannot digest the pancreatic or stomach cells that produce them. They are activated only after reaching the gut lumen. The point is protection of the producing tissue, not energy saving or sweetness. - Boiling an enzyme solution destroys its activity because
Correct answer: Boiling an enzyme solution destroys its activity because the protein unfolds (denatures). Boiling unfolds the enzyme’s three-dimensional protein structure β denaturation β destroying the precise shape of the active site. Without that shape the enzyme cannot bind substrate, so catalytic activity is lost. Evaporation, substrate creation, and pH are not the mechanism. - Warming an enzyme-catalyzed reaction first speeds it up, then slows it, because
Correct answer: Heat eventually denatures the enzyme. Warming first speeds the reaction because molecules collide more often and more energetically. Past the enzyme’s optimum, heat begins denaturing the protein, and activity falls. The rise is kinetic; the fall is structural damage, not substrate depletion or evaporation. - Amylases, proteases, and lipases all belong to the enzyme class called
Correct answer: Hydrolases. Amylases, proteases, and lipases all catalyze hydrolysis β breaking bonds by adding water β so they belong to the hydrolase class, EC class 3. They are not oxidoreductases, isomerases, or ligases. - A complete, catalytically active enzyme with its cofactor is called the
Correct answer: Holoenzyme. The complete, catalytically active enzyme including its cofactor is the holoenzyme. The protein portion alone is the apoenzyme; a zymogen is an inactive precursor; an isoenzyme is an alternate molecular form. - Enzymes are classified into six major classes based on
Correct answer: The type of reaction they catalyze. The six major enzyme classes of the Enzyme Commission system are defined by the type of reaction catalyzed: oxidoreductases, transferases, hydrolases, lyases, isomerases, and ligases. Size, color, and source play no role in classification. - Allosteric enzymes are regulated by molecules that bind
Correct answer: Allosteric enzymes are regulated by molecules that bind at a separate regulatory site. Allosteric regulators bind at a site separate from the active site β the allosteric site β and change the enzyme’s shape and activity from a distance. Molecules binding at the active site itself are substrates or competitive inhibitors, not allosteric effectors. - Enzymes speed up biochemical reactions by
Correct answer: Lowering the activation energy. Enzymes speed reactions by lowering the activation energy β stabilizing the transition state β so more molecules can react at a given temperature. They are not consumed, they do not change the products or the overall energy balance, and they do not work by heating. - Many enzymes require metal ion cofactors such as
Correct answer: Zinc, magnesium, or iron ions. Many enzymes need metal ion cofactors β zinc in carbonic anhydrase and alcohol dehydrogenase, magnesium in kinases, iron in cytochromes β which assist catalysis at the active site. Sodium and chloride alone are not typical catalytic cofactors, and plenty of enzymes do require ions. - In feedback inhibition, the end product of a metabolic pathway
Correct answer: In feedback inhibition, the end product of a metabolic pathway inhibits an early enzyme of that same pathway. In feedback inhibition, the end product of a pathway binds and inhibits an enzyme early in that same pathway, throttling production when supply is sufficient. It is a classic negative-feedback control of metabolism. The product slows the pathway; it does not speed it up or leave the cell. - An enzyme’s active site is
Correct answer: An enzyme’s active site is the specific region where substrate binds. The active site is the specific pocket or cleft on the enzyme where the substrate binds and the reaction occurs β a small fraction of the protein’s surface. It is not the whole surface, not the encoding gene, and not a storage form. - An enzyme’s turnover number (kcat) tells
Correct answer: An enzyme’s turnover number (kcat) tells how many substrate molecules one active site converts per second. The turnover number, kcat, is the number of substrate molecules one active site converts to product per second when the enzyme is saturated. It measures catalytic speed β carbonic anhydrase reaches about a million per second. It says nothing about enzyme quantity, weight, or temperature. - The induced-fit model of enzyme action proposes that
Correct answer: The active site molds around the substrate on binding. The induced-fit model proposes that the active site is flexible: substrate binding molds the site around the substrate into the optimal catalytic shape. This replaced the rigid lock-and-key picture while keeping the idea of specific fit.