Login Register

Access the GIFSQ Portal

Select your user type to log in or register a new account.

Student Portal

Access your food safety courses and exams.

Instructor Portal

Manage courses, view student submissions, and grade quizzes.

Company Portal

Manage corporate setup, view employee logs, and access QA services.

Dairy Technology Part 10 Quiz

GIFSQ ID: ART-1132

Test your knowledge with this free 20-question Dairy Technology quiz (Part 10). Choose the correct answer for each…

What this quiz covers

The first half of this quiz is ice cream. An emulsifier gives a uniform whipping quality, milk fat builds a creamy flavour, and a stabilizer prevents the growth of ice crystals. Ice-cream mix is usually pasteurized at 68 degrees C for 30 minutes, then cooled and aged at 0 to 4 degrees C. Soft-serve carries less fat than regular ice cream, and mono-glycerides improve fat dispersion and whipping ability, while emulsifiers do not come only in semi-solid form, which is the false statement the quiz asks you to spot.

The second half switches to cheese. Feta is traditionally made from sheep milk, and Roquefort is traditionally made from sheep milk too. Blue cheese, Brie and Gammelost are all mold-ripened, hard-cheese yield depends on both the fat and casein percentage of the milk and the moisture kept in the cheese, and paraffin wax coats cheese both to stop moisture evaporating and to seal the surface pores. Leaky is not a cheese-defect term, while gassy, bitter and yeasty all are.

Curing rooms and rennet

Cheese is normally cured at 8 to 12 degrees C and 75 percent relative humidity, and during curing the lactose ferments, the proteins break down and the fat breaks down, all three changes together. Rennet coagulation is influenced by the enzyme concentration, the temperature and pH, and the properties of the milk, all three. Rennet is prepared from the fourth stomach, the abomasum, or the dried stomach lining, any of these, the curd is hooped at 29 to 32 degrees C, and the cheese drying chamber is kept at 12 to 16 degrees C.

How to use this quiz

Learn the ice-cream chain in order before you start: pasteurize 68 degrees C for 30 minutes, age 0 to 4 degrees C, then freeze. Then keep the cheese numbers paired: curing 8 to 12 degrees C, hooping 29 to 32 degrees C, drying 12 to 16 degrees C. After you finish, read the explanations below the player: each one states the correct answer and the reason in plain words, so a wrong answer becomes a fact you can carry into the next lab session or exam.

Dairy Technology Part 10 Quiz
Uncategorized

Choose how you want to play

Sound effects
🔈 Volume
Show explanations
🔊 Auto-read every question
Reading speed

Note: the player shuffles the questions and the answer options on every attempt, so the numbers in the player will not match the numbers in the explanations below. Match each answer by its wording.

Answer explanations

Worked through the quiz? Here is why each correct answer is correct: the concept behind it, in plain terms.

  1. What does an emulsifier do in ice cream?
    1. Gives a uniform whipping quality (correct answer)
    2. Raises the freezing point of the mix
    3. Adds sweetness to the mix
    4. Thickens the mix by swelling

    Correct answer: Gives a uniform whipping quality: An emulsifier in ice cream gives a uniform whipping quality, helping the fat globules cluster evenly so the mix whips to a smooth foam.
  2. What is milk fat’s main role in ice cream?
    1. Build a creamy flavor (correct answer)
    2. Hold back microbes
    3. Give the mix its color
    4. None of these

    Correct answer: Build a creamy flavor: Milk fat’s main role in ice cream is to build a creamy flavour, carrying the flavour compounds that make ice cream taste rich.
  3. What is the main function of a stabilizer in ice cream?
    1. Add nutritive value
    2. Add flavor
    3. Prevent the growth of ice crystals (correct answer)
    4. Extend the shelf life

    Correct answer: Prevent the growth of ice crystals: The main function of a stabilizer in ice cream is to prevent the growth of ice crystals, keeping the texture smooth during storage.
  4. Which statement about ice-cream emulsifiers is NOT true?
    1. Mono-glycerides improve fat dispersion and whipping ability
    2. Emulsifiers come only in semi-solid form (correct answer)
    3. Mono-glycerides moderately affect stiffness and melting rate
    4. Poly-glycerol derivatives give a drier, stiffer product with a longer melting time

    Correct answer: Emulsifiers come only in semi-solid form: Emulsifiers do not come only in semi-solid form: they are also available as liquids and powders, so that statement is the false one.
  5. Ice-cream mix is usually pasteurized at
    1. 65 °C for 30 minutes
    2. 68 °C for 30 minutes (correct answer)
    3. 72 °C for 30 minutes
    4. 70 °C for 30 minutes

    Correct answer: 68 °C for 30 minutes: Ice-cream mix is usually pasteurized at 68 degrees C for 30 minutes, the batch treatment that kills pathogens without cooking the flavour.
  6. Ice-cream mix is cooled and aged at
    1. 0–4 °C (correct answer)
    2. 0–10 °C
    3. 4–6 °C
    4. About 10 °C

    Correct answer: 0–4 °C: Ice-cream mix is cooled and aged at 0 to 4 degrees C, the cold rest that lets the fat crystallize and the proteins hydrate before freezing.
  7. How does the fat content of soft-serve compare with regular ice cream?
    1. More fat
    2. Less fat (correct answer)
    3. The same amount of fat
    4. None of these

    Correct answer: Less fat: Soft-serve has less fat than regular ice cream, which is part of why it feels lighter and is served straight from the freezer.
  8. Which is NOT a chief requirement for ice-cream packaging?
    1. An attractive appearance
    2. Easy opening
    3. Easy disposal
    4. Reusable food-grade material (correct answer)

    Correct answer: Reusable food-grade material: An attractive appearance, easy opening and easy disposal are chief requirements for ice-cream packaging, while reusability is not: the pack is single-use. Note that food-grade material itself is essential; the key turns on reusability, not on food-grade status.
  9. What milk is traditionally used to make feta cheese?
    1. Cow milk
    2. Goat milk
    3. Buffalo milk
    4. Sheep milk (correct answer)

    Correct answer: Sheep milk: Feta cheese is traditionally made from sheep milk, the milk that gives feta its sharp, tangy character.
  10. Roquefort cheese is traditionally made from
    1. Cow milk
    2. Goat milk
    3. Buffalo milk
    4. Sheep milk (correct answer)

    Correct answer: Sheep milk: Roquefort cheese is traditionally made from sheep milk, ripened in the caves of Roquefort with Penicillium roqueforti.
  11. Which of these cheeses are mold-ripened?
    1. Blue cheese
    2. Brie cheese
    3. Gammelost
    4. All of these (correct answer)

    Correct answer: All of these: Blue cheese, Brie cheese and Gammelost are all mold-ripened, so all three belong in the set.
  12. Hard-cheese yield depends mainly on
    1. The fat and casein percentage of the milk
    2. The amount of moisture kept in the cheese
    3. Both of these (correct answer)
    4. Neither of these

    Correct answer: Both of these: Hard-cheese yield depends mainly on both the fat and casein percentage of the milk and the amount of moisture kept in the cheese, so both factors apply.
  13. Why is cheese coated with paraffin wax?
    1. Stop moisture from evaporating
    2. Seal the surface pores
    3. Both of these (correct answer)
    4. None of these

    Correct answer: Both of these: Cheese is coated with paraffin wax both to stop moisture from evaporating and to seal the surface pores, so both reasons apply.
  14. Which of these words is not a cheese-defect term?
    1. Gassy
    2. Leaky (correct answer)
    3. Bitter
    4. Yeasty

    Correct answer: Leaky: Leaky is not a cheese-defect term, while gassy, bitter and yeasty are all recognized words for cheese defects.
  15. What temperature and relative humidity are normally kept while curing cheese?
    1. 0–4 °C and 100% RH
    2. 0.5 °C and 50% RH
    3. 8–12 °C and 75% RH (correct answer)
    4. Above 16 °C and 60% RH

    Correct answer: 8–12 °C and 75% RH: Cheese is normally cured at 8 to 12 degrees C and 75 percent relative humidity, cool and humid enough to ripen slowly without drying out.
  16. Which changes take place during cheese curing?
    1. Lactose ferments
    2. Proteins break down
    3. Fat breaks down
    4. All of these (correct answer)

    Correct answer: All of these: During cheese curing the lactose ferments, the proteins break down and the fat breaks down, so all three changes take place.
  17. Rennet coagulation of milk is influenced by
    1. The enzyme concentration
    2. The temperature and pH
    3. The properties of the milk
    4. All of these (correct answer)

    Correct answer: All of these: Rennet coagulation of milk is influenced by the enzyme concentration, the temperature and pH, and the properties of the milk, so all three apply.
  18. Rennet is prepared from which part of the suckling young ruminant?
    1. The fourth stomach
    2. The abomasum
    3. The dried stomach lining (veil)
    4. Any of these (correct answer)

    Correct answer: Any of these: Rennet is prepared from the fourth stomach, the abomasum, or the dried stomach lining of the suckling young ruminant, and since the abomasum is the fourth stomach, any of these names fits.
  19. What temperature is kept when hooping the curd?
    1. 10–15 °C
    2. 29–32 °C (correct answer)
    3. 15–20 °C
    4. 20–24 °C

    Correct answer: 29–32 °C: A temperature of 29 to 32 degrees C is kept when hooping the curd, warm enough for the curd to knit together under its own weight.
  20. What temperature is maintained in the cheese drying chamber?
    1. 12–16 °C (correct answer)
    2. 17–21 °C
    3. 21–25 °C
    4. 5–10 °C

    Correct answer: 12–16 °C: A temperature of 12 to 16 degrees C is maintained in the cheese drying chamber, cool enough to dry the rind slowly without cracking it.