Canning β Part 3
GIFSQ ID: ART-0782
What this quiz covers
This quiz is the sequel to Canning Part 2, and it is all about what goes wrong in a sealed can. Medium-acid foods run from pH 4.5 to 5.3 and high-acid foods sit below pH 3.7, in this quiz’s banding. Spoilage of canned foods is caused by underprocessing, inadequate cooling and can leakage. When the ends stay flat but the contents turn sour, it is flat sour, and it mostly affects low-acid foods.
The organisms have names worth learning in pairs. Flat sour is caused by Bacillus stearothermophilus and Bacillus coagulans together. TA spoilage is caused by Clostridium thermosaccharolyticum, producing carbon dioxide and hydrogen and a sour odour. Sulfur stinker spoilage is caused by Clostridium nigrificans in low-acid foods, and it smells of rotten eggs. Overfilling can lead to both flipper and springer defects, iron contamination makes ferric tannate, which is black, and a mild swell with one end bulging is a springer.
The can defects, in order of worry
A flipper is caused by overfilling and is a physical defect, so the food inside is safe to eat, though the can is still rejected as defective. A hard swell, with both ends bulged and staying bulged, is the one to fear: swells can be caused by hydrogen and carbon dioxide, and a swollen can is never eaten. Leaker, breather and buckling round out the list of spoilage defects an inspector must reject.
How to use this quiz
Work through the quiz slowly and say each answer with its reason before you pick it, since the options often repeat the same numbers in a different order. After you finish, read the explanations below the player: each one states the correct answer and the reason in plain words, so a wrong answer becomes a fact you can carry into the next lab session or exam.
Choose how you want to play
Note: the player shuffles the questions and the answer options on every attempt, so the numbers in the player will not match the numbers in the explanations below. Match each answer by its wording.
Answer explanations
Worked through the quiz? Here is why each correct answer is correct: the concept behind it, in plain terms.
- Between the low-acid and high-acid categories lies a middle band. What pH range defines medium-acid foods?
Correct answer: 4.5β5.3: Medium-acid foods are defined by pH 4.5 to 5.3 in this quiz’s banding. - Pickles and citrus juices need only a boiling-water bath to can safely. What pH defines high-acid foods?
Correct answer: Below 3.7: High-acid foods are defined by a pH below 3.7 in this quiz’s banding. - A cannery investigates a spoilage outbreak and finds three possible culprits. What causes spoilage of canned foods?
Correct answer: Underprocessing, inadequate cooling, and can leakage: Spoilage of canned foods is caused by underprocessing, inadequate cooling and can leakage. - A can looks perfectly normal, yet the food inside tastes sour. When the ends stay flat but the contents turn sour, what is it called?
Correct answer: Flat sour: When the ends stay flat but the contents turn sour, it is called flat sour. - Flat sour spoilage has a preferred victim among canned foods. Which kind of food does it mostly affect?
Correct answer: Low-acid (non-acid) foods: Flat sour mostly affects low-acid (non-acid) foods. - Two heat-loving Bacillus species team up as the culprits behind flat sour. Which bacteria are responsible?
Correct answer: Bacillus stearothermophilus and Bacillus coagulans: Bacillus stearothermophilus and Bacillus coagulans together are responsible for flat sour. - A swollen can of corn hisses on opening: thermophilic anaerobe spoilage. Which organism causes TA spoilage?
Correct answer: Clostridium thermosaccharolyticum: TA spoilage is caused by Clostridium thermosaccharolyticum. - The swelling can from TA spoilage is full of microbial gas. Which gases are produced?
Correct answer: Carbon dioxide and hydrogen: The gases produced are carbon dioxide and hydrogen. - An inspector opens a TA-spoiled can and sniffs. What odour does the spoiled food have?
Correct answer: A sour odour: TA-spoiled food has a sour odour. - A can of peas smells of rotten eggs when opened. Which organism causes this sulfur stinker spoilage?
Correct answer: Clostridium nigrificans: Sulfur stinker spoilage is caused by Clostridium nigrificans, which makes hydrogen sulfide. - Sulfur stinker spoilage favours the same canned foods as flat sour. In which kind of foods does it occur?
Correct answer: Low-acid foods: Sulfur stinker occurs in low-acid foods. - A seamer overfills cans to save product and creates seam-straining defects. What can overfilling lead to?
Correct answer: Both flipper and springer: Overfilling can lead to both flipper and springer defects. - Iron contamination turns canned food an inky dark colour. What colour is the ferric tannate formed?
Correct answer: Black: Ferric tannate is black, so iron contamination turns canned food an inky dark colour. - One end of a can bulges slightly but pops back when pressed. What is a can with this mild positive pressure called?
Correct answer: Springer: A can with one end bulging slightly but popping back when pressed is a springer. - A can end flips outward when the can is tapped, a physical defect. What causes a flipper?
Correct answer: Overfilling: A flipper is caused by overfilling. - Gas pressure builds gently and one can end swells mildly. What is this mild swell called?
Correct answer: Springer: A mild swell with one end bulging is a springer. - Both ends of a can bulge out and stay bulged no matter how hard you press. What is this called?
Correct answer: Hard swell: When both ends bulge out and stay bulged, it is a hard swell. - A swollen can may be corroding inside or fermenting inside. Which gases can cause swells?
Correct answer: Hydrogen and carbon dioxide: Swells can be caused by hydrogen and carbon dioxide, from corrosion or fermentation. - An inspector must decide which defective can is still safe. Which of these canned foods is safe to eat?
Correct answer: Flipper: A flipper is a physical defect, not microbial spoilage, so the food inside is safe to eat, though the can itself is rejected as defective. - A quality manual lists can defects an inspector must reject. Which of these are spoilage defects in canned foods?
Correct answer: Leaker, breather, and buckling: Leaker, breather and buckling are all spoilage defects in canned foods.