Butter Manufacture – Part 2
GIFSQ ID: ART-0871
What this quiz covers
This quiz is the second half of butter manufacture: twenty questions on what goes wrong with butter and how long it keeps. If the first part was about making butter, this part is about judging it: texture defects, keeping quality, and the small composition figures, curd, air and colour, that separate good butter from poor butter.
You will meet the texture defects first: crumbly butter from underworking, gummy butter from high-melting fats, and greasy butter from overworking, plus mottled colour and mealy texture and what each one is classified as. Then come the keeping-quality factors: copper and iron, acidity, salt, curd, light, and why unsalted butter keeps worse than salted. The set closes with working and ripening numbers: air in worked butter, curd near 0.8 percent, cream ripening at 21 degrees C, and annatto, its dose and its properties. The numbers are small, but they are the difference between butter that spreads and butter that crumbles.
Why defects have names
Butter defects are named so a maker can trace them back to the step that caused them. Crumbly points at working, gummy points at the fat itself, and a short shelf life points at salt, curd or light. Learning the defect with its cause is what turns a complaint at the shop into a fix at the churn.
How to use this quiz
Take it cold first, then read the explanations below the player. Each answer explains why the correct choice is right in plain words, so a wrong answer becomes a fact you keep. Use it as a revision round before an exam or a job interview, and come back to the questions you missed.
Choose how you want to play
Answer explanations
Worked through the quiz? Here is why each correct answer is correct: the concept behind it, in plain terms.
- A butter block crumbles instead of spreading smoothly. A crumbly texture in butter arises from which fault?
Correct answer: Underworking. Crumbly, brittle butter traces to underworking — the grains never knit into a compact, waxy mass — or to sudden chilling right after production. Adequate working and controlled cooling prevent it. Sources: De. - A butter sample feels sticky and gummy on the palate. A gummy texture in butter arises from which fault?
Correct answer: High-melting-point fats. A gummy body that chews instead of melting comes from high-melting triglycerides (solid fat) in the churn, usually a feed effect; avoiding feeds rich in high-melting-point fats is the fix. Sources: De. - Butter worked far too long in the churn turns oily. Overworking butter during manufacture causes which texture defect?
Correct answer: Greasy texture. Overworking smears the fat into a continuous oily film, giving a greasy texture; the remedy is adequate — not excessive — working. Sources: De. - A butter block shows patchy, uneven colouring. Mottled appearance in butter is classified as which kind of defect?
Correct answer: Colour. Mottled, patchy appearance is a colour defect — inadequate washing of the grains or uneven salt incorporation — scored under colour and appearance, not flavour or texture. Sources: De. - A butter sample feels grainy and mealy on the tongue. A mealy texture in butter is classified as which kind of defect?
Correct answer: Texture. A mealy, grainy mouthfeel is a body-and-texture defect, typically from improper neutralization of high-acid cream or oiling-off during making. Sources: De. - Butter straight from the fridge tears bread, but melted butter oils off. Butter spreads most easily in which temperature range?
Correct answer: 16 to 24°C. Butter spreads most easily around 16–24°C: colder and the crystal network is too rigid (it tears bread); much warmer and it oils off. That is why butter turns spreadable near 15°C at room temperature. Sources: De. - Traces of certain metals in butter accelerate spoilage. Higher levels of copper and iron make its keeping quality do what?
Correct answer: Deteriorate. Copper and iron catalyse fat oxidation — the tallowy, metallic off-flavours — so higher levels deteriorate keeping quality. Sources: De. - Sour-cream butter does not keep as long as sweet-cream butter. Higher acidity in butter makes its keeping quality do what?
Correct answer: Fall. Higher acidity, as in sour-cream butter, feeds spoilage organisms, so keeping quality falls compared with sweet-cream butter. Sources: De. - Salt has preserved foods for millennia, and butter is no exception. A higher salt content makes the keeping quality of butter do what?
Correct answer: Improve. Salt is butter's classic preservative, lowering water activity in the droplets and checking microbes — more salt means better keeping quality. Sources: De. - Buttermilk left in butter feeds spoilage microbes. A higher curd (protein) content makes the keeping quality of butter do what?
Correct answer: Fall. More curd (protein) means more food for proteolytic spoilage flora, so keeping quality falls; thorough grain washing removes the buttermilk curd. Sources: De. - Butter in clear wrapping on a lit shelf deteriorates faster. Exposing butter to light has which effect?
Correct answer: Lowers keeping quality. Light drives photo-oxidation of the fat and bleaches colour, so butter on a lit shelf keeps worse — opaque wrapping is the defence. Sources: De. - Sweet butter lacks salt's protection. How does the keeping quality of unsalted butter compare with salted?
Correct answer: Poorer. Unsalted (sweet) butter lacks salt's antimicrobial hurdle, so it keeps more poorly than salted butter in the same storage. Sources: De. - Working butter folds in a little air, which the law limits. Normally worked butter contains about how much air per 100 g?
Correct answer: 0.5 to 10 ml. Normally worked butter carries 0.5–10 ml of air (average ~4 ml) per 100 g; working folds air in, and vacuum working can cut it to about 1 ml/100 g. Excess air favours oxidative and microbial spoilage. Sources: De. - Butter is mostly fat, with a small residue of non-fat solids. Normal butter contains about what percentage of curd?
Correct answer: 0.6 to 1.0%. Good butter analyzes about 0.8% curd (milk solids-not-fat), inside the 0.6–1.0% band; legal ceilings run higher, but proper washing leaves only this residue. Sources: De. - Summer cream, rich in soft fats, butters quickly. How does a larger share of soft, low-melting fats affect the churning period?
Correct answer: Shorten it. Soft, low-melting fats liquefy readily at churning temperature, so globules aggregate fast and the churn finishes sooner — summer cream's advantage. Sources: De. - Cream must ripen warm enough for the starter culture to thrive. Cream ripening for butter making is typically done at about what temperature?
Correct answer: 21°C. Cream ripening for butter runs at about 21°C, the sweet spot for mesophilic lactic cultures to build acid and diacetyl in 15–16 hours. Sources: De. - Cream must be standardized before it enters the churn. Cream is standardized to what fat level for butter making?
Correct answer: 35 to 40% fat. Cream is standardized to 35–40% fat for butter making — rich enough to churn efficiently without drowning the churn in buttermilk. Sources: De. - Butter's golden colour hints at the vitamins dissolved in its fat. Butter is a rich source of which class of vitamins?
Correct answer: Fat-soluble. Butter's golden colour rides with its fat: it is a rich source of the fat-soluble vitamins A, D, E and K dissolved in milk fat. Sources: De. - A butter-maker tints pale winter butter with annatto. The standard rate of colour addition is about how much per 100 kg of butter?
Correct answer: 0 to 250 ml. Standard butter colour is dosed at 0–250 ml per 100 kg of butter fat, added to the cream in the churn for a uniform year-round shade. Sources: De. - Annatto colours butter golden, but one listed property is false. Which of these is NOT a property of annatto colour?
Correct answer: Water soluble. Annatto butter colour is the oil extract of Bixa orellana seeds (bixin) and must be oil-soluble to dissolve in the fat phase — 'water soluble' is the false property. It is non-toxic and used at levels that add no flavour. Sources: De.